PROVN OF CERTAIN SPECIAL REPAIR REVENUE AND MINOR WORK UNDER AGE BRI AT BB CANTT SRINAGAR

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thicknes, including Nainital or similar pattern roof covering complete all as specified and directed.

S&F Galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with coatch screws and washers in roofs, 0.63 mm thick m Gde-o quality, with 120 grms/sqm zinc coating and Gde 'B' (i.e 12.5 mm ) corrugation, complete, all as specified and as directed

S&F 0.80 mm thick plain, galvanised, mild steel sheeting (ISI Marked) grade 'O' with minimum 120 grms/sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashings, fixed with coatch screws and washers complete all as specified and as directed

M&L preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M&L for preparation of old steel and steel based surfaces of any description exc 10cm with or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling timber scantlings 40 Sqcm and over in section, in unframed work in any position complete all as specified and directed.

S&F 2nd class hard wood clean sawn timber fixed in scantling complete all as specified and directed.

S&F in repairs 20mm thick boarding clean sawn as in eaves board fixed with nails complete all as specified and as directed.

Dismanling wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Plywood 6mm thick grade BWR type BB fixed with nails to timber frame work commercial type as in ceiling fixed with nails complete all as specified and directed.

S&F 2nd class soft wood sec area n exc 3 Sqcm plain fillets, square, rectangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n. exc 1.5 Sq.m each,complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 square metre but n.exc 4 square metre each, complete all as specified and directed.

S&F 2nd class soft wood plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick 2nd class soft wood plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers complete all as specified and directed.

S&F 35 mm thick 2nd class soft wood glazed and skelton shutters open rebated and prepare to receive glass or gauge etc edges of framing plain chamfered fixed to chowkats, SSR-2010 Part-I clause 8.24(a) complete all as specified and directed.

S&F 30 mm thick 2nd class soft wood glazed and skelton shutters open rebated and prepare to receive glass or gauge etc edges of framing plain chamfered fixed to chowkats, SSR-2010 Part-I clause 8.24(b) complete all as specified and directed.

S&F GI wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm and fixed with wire staples complete all as specified and directed.

S&F 3 mm thick sheet glass of ordinary quality 3.0mm thick and glazing with oil putty in squares n exc 0.5Sqm in each pane complete all as specified and directed.

S&F 100 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed.

S&F 75 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all specified and directed.

S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 125mm Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 150 mm size aluminium handles cast type anodised all complete all as specified and directed.

S&F 125 mm size aluminium handles cast type anodised all complete all as specified and directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 300mm mild steel ordinary rat tail rod pattern spring including roller plate complete all as specified and directed.

S&F floor door stopper of alumium body and tongue anodised with land drawn steel spring overall lengthof cover plate 140mm fixed with screw, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete walls ,ceiling etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick rendering in cm 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of oil emulsion ditemeper over a coat of chalk whiting on plastered surfaces complete all as specified and directed.

M&L for complete removing existing treatment including scraping, removing all mud cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by using necessary filling compound of Altek/Birla oil putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion complete all as specified and directed.

M&L for preparing plastered or unplastered old surfaces of walls and applying two coat of cement base paint, over a coat of primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and in pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1: 3: 6 type C-2 (using 20 mm graded crushed stone aggregate) laid in alternate bays (not exc 2 sqm each) as in plinth protection, finished the surfaces even and smooth without using extra cement complete, all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B0(12.5mm graded crushed stone aggs) as in sub base of flooring including finished surfaces even and fair complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed or bedding layer of mortar in CM 1:6 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete, all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 450mm x 300mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in Cement mortar 1:3 complete all as specified and directed.

M&L for 20-25mm thick machine cut Kota stone slab in flooring laid over 20mm thick cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20-25mm thick machine cut Kota stone slab in skirting laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 10 mm back coat in CM 1 :3, all as specified and directed.

Excavation in post holes each not exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering, and removing surplus soil to a distance n.exc 50 Mtr and making good surface in any type of soil complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in filling and mass concrete all as specified and directed.

Supply and fix hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, welding, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting hard dense soil complete all as specified and directed.

Removing demolised material (spoil) not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

M & L broken stone or boulders hardcore of guage n.exc 63 mm, deposited spread and levelled in layers n.exc 15 cm thick ,watered and rammed to a true surface complete all as specified and as directed.

M&L PCC 75 mm thick1:4:8 type D2 (Using 40mm graded stone aggregate) as in fdn concrete mass filling complete all as specified and directed.

M/L brick work with sub class 'B' bricks straight or curved on plan built in CM 1:6 complete all as specified and directed.

Material and labour rendering 15mm thick on other than fair faces of brick work in CM 1:4 surface finished even and smooth without using extra cement complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for 60mm thick factory made coloured glossy finished interlocking cement concrete paver blocks any any shape and size conforming to IS 15658-2006 of M-35 Grade ( Coloured and shape of block shall be approved by Engr-in- charge) complete all as specified and directed.

M&L for preparation of new plastred surface of wall and applying two coats of Cement base paint over a coat of alkale resistant priming paint complete all as specified and directed.

S & F MS Angle 50x50x 6 mm iron post as in post struts for fencing posts etx confirming to Fe- 310 -0 complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed.

S&F Mild steel in flat, round or square bars, in available lengths Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&Lprepration of new surfaces and applying two coat of OBD on new surfaces on wall over a coat of primer complete all as specified and directed.

M&L for Non skid ceramic white tiles area of each tiles (Square / rectangular) exc 0.11 sqm but n. exc 0.18 sqm 7 to 8 mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete, all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 350mm x 250mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in Cement mortar 1:4 complete all as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F butt hinges 100mm size, extrded aluminium alloy with galvanised mild steel hinge pin, anodised type B-21 complete all as specified and directed.

S&F extruded aluminium alloy handles 125mm size fabricated type anodised complete all as specified and directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F bib taps, 15 mm bore cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F stop vlaves 15mm bore, cast copper alloy with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm bore GI tubing medium grade ISI marked with all fitting and fixed complete to walls or concealed or fitted to ceilings or laid in floors complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern 10 ltr capacity low level, white, with intel, ball valve, float & handle including brackets complete all as specified and directed.

S&F vitreous china squatting pan of pattern 'long pan' size 580mm white with 'P' or 'S' trap front or back inlet & foot rests, any pattern (exclusing flushing cistern & flush pipe) complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore double socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any redius 110mm dia complete all as specified and directed.

S&F PVC (SWR) , junction double, (double T) , equal or unqual 110mm dia complete all as specified and directed.

M&L for 100 mm thick cement concrete type B-1 1:2:4 (20mm graded aggregate) as in flooring including finishing cement concrete surface even and smooth w/o using extra cement complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate), 75 mm thick as in sub base complete all as specified and as directed.

M&L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F rolled mild steel framed trusses purlins etc confirming to Fe 410-0 including distance pieces, cleats etc complete all as specified and directed.

S&F 0.5mm Pre-painted galvatume aluminium Zinc coating steel GI based corrugated sheet of any colour having tensile strength of 550 Mps as in rof covering/caldding to wall, fixed with self taping screwscomplete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and dia.

Excavation in trenches, n.exc 1.5 mtr wide and n.exc 1.5 mtr wide in depth in foundation shafts, walls, cesspits, manholes including sewage lines and getting out in soft/loose soil, complete all as specified and directed.

Brickwork with sub class B brick straight or curved on plan exc 6m mean radius buit in cement mortor in CM 1:6 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick on other than fair face of brick work in cm 1:4 all as specified finished even and smooth without using extra cement, with using water proofing compound 3% by weight of cementcomplete all as specified and as directed. Note :- WPC shall be measured and paied seperately

Supply only Integral Water Proofing Compound and used as per manufacturer instruction complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying two coats of cement base paint, white or tinted on plastered surface walls over one coat of priming paint complete all as specified and directed.

M&L formwork to sides and soffits of floor or roof beams, lintels flat rough finished surface of concrete complete all as specified and directed.

S&F TMT bars 10mm dia and over in reinforcement cut to length, bent to shape required including cranking bending spirally or hooping for column, hooking ends and binding with mild steel wire (annealed)not less than 0.9mm dia complete all as specified and directed.

All as srl No 92 above but 6 to 8mm dia complete all as specified and directed.

M&L RCC (nominal mix) type B1 1:2:4 (20mm graded aggregate) as in beams/ lintels complete all as specified and directed.

S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe 410-W(Gde-E-250) quality-A complete all as specified and directed.

S&F 2nd class soft wood 20 mm thick clean sawn as in eaves board ceilling, soffits etc with butt joints, all as spd and directed.

M&L for Non skid ceramic coloured tiles area of each tiles (Square / rectangular) exc 0.06 sqm but n. exc 0.11 sqm 7 to 8 mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete, all as specified and as directed.

Ditto as per item ser No 97 above for work on vertical surfaces including 10 mm thick rendering in Cement mortar 1:4 complete all as specified and directed.

S&F Aluminum pressed handle oval type stove enamelled black 100 mm in size complete, all as specified and as directed.

S&F Angle valve cast copper alloy chromium plated fancy type long body with capstan haed handle (concealed type) screwed down high pressure screwed for iron pipe or for brass ferrule of bore 15mm fixed in repairs complete all as specified and directed.

S&F for brass CP mixer of 15mm bore dia of pipe for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

M&L PVC (SWR) floor trap 75mm diameter of outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) pipe 75mm bore double socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any redius 75mm dia complete all as specified and directed.

S&F steel water tubing of size 20 mm dia, medium grade, galvanised iron with all fittings such as sockets, bends, unions, tee, short pieces, nipples, brass nuts, and disminishing pieces complete all as per IS-1239 laid inn floors, fixed to walls and ceilings complete all as specified and directed.

M&L for Lagging to 15mm bore pipes used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAPON' section of density 144kg/cm confirming to IS-9842, provided with chicken mesh netting 25 gauge 20mm mesh binding wire, and reinforecement with plaster of paris complete all as specified and directed.

M&L for Lagging to 20mm bore pipes used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAPON' section of density 144kg/cm confirming to IS-9842, provided with chicken mesh netting 25 gauge 20mm mesh binding wire, and reinforecement with plaster of paris complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) hoisted and fixed in position incl all accessories of capacity 500 ltrs, complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 15/20 mm dia all as specified and as directed.

S&F for brass chromium plated tubular towel rail 20mm dia complete all as specified and directed.

S&F for soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

M&L for providing 50mm thick cement concrete 1:3:6 type C2 using 20mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cement complete all as specified and directed.

M&L steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St. -240 complete all as specified and directed.

M&L for providing Damp proof course 40 mm thick in cement concrete 1:2:4 type B0 on horizontal & vertical surfaces including necessary formwork. WPC will be measured separately complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm graded aggregate in coping including necessary formwork complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed.

S&F 2nd class soft wood (Deodar) plain, solid chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints supplied and fixed complete, all as specified and as directed.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane ® complete, all as specified and as directed

M&LPlain fillets exc 13 and n exc 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

M&L second class hard-wood plain fillets square, rectangular or triangular in section, clean sawn, secured with nails of sectional area exc 3 but n.exc 6 sq.cm complete all as specified and directed.

Supply and fix 20mm thick boarding clean sawn as in eaves board fixed with nails complete all as specified and directed.

S&F Butt hinges medium weight cold rolled of 125mm size complete all as specified and directed.

S&F extruded aluminium alloy handles 150mm size fabricated type anodised complete all as specified and directed.

S&F Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed.

S& F vitreous China urinals, bowl type (back or corner wall type) , size of 465x355x265mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush ipe grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) and Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60 gms)complete all as specified and as directed.

S&F vitreous china wash down water closet pan (pedestal pattern) white with P or S trap incl flushing pipe , seat and PVC seat cover (white) closed pattern with flat bottom & cover brass chromium plated hinging device, incl connection to drain and to flushing pipe, antisyhonage pipe etc complete all as specified and directed.

S&F Jet spray for EWC with cable lenth 1 mtr for 15 mm dia pipe nut (as per sample) complete, all as specified and as directed.

S&F Vitreous china wash hand basin incl pedestal flat back 550x400mm white excluding taps, waste chain and plug but including brackets complete all as specified and directed.

S&F 15 mm dia pillar taps, fancy type with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F 15 mm CP angle valve fancy type, chromium plated for iron pipe or for unions and fixed complete all as specified and directed.

S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. complete all as specified and directed. (Minimum weight 190gms)

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both side ends for iron pipe or for union 20mm dia complete all as specified and directed.

S&F PVC (SWR) pipes of 110mm bore single socketed, in any lenth with rubber ring joints, laid in trenches complete all as specified and directed.

M&L for concrete bed to drain pipes of 100 mm dia (internal bore) including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110mm bore complete all as specified and directed.

S&F PVC (SWR) pipes of 75mm bore single socketed, in any lenth with rubber ring joints, laid in floors complete all as specified and directed.

S&f 0.63 mm thick Plain, galvanised mild steel sheeting in ridges, hips, vallley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 273 complete all as specified and directed.

M&L 100mm thick PCC 1:2:4 type B1(40 mm graded crushed stone aggs) as in flooring including finished surfaces even and smooth without using extra cement complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A', complete all as specified and directed.

Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size , holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Anodised aluminium door shutter, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips rubber neoprene packing handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

Sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sqm in each pane complete all as specified and directed.

Shingle filling in floors or pavings, laid in layers n. exc 15 m thick spread, levelled, and blinded with earth and rammed including watering complete all as specified and directed.

Machine pressed precast concrete interlocking paver block 60mm any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 (20mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work, not exceeding 200mm thick (horizontal or slopping) complete all as specified and directed.

Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing all as specified and directed.

M & L for Point wiring with 1.5 Sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed), surface type, drawing in and including PVC Casing caping or PVC concealed conduit 19mm dia, having wall thickness not less than 2 mm with sunk cast iron/pressed steel terminal boxes made out of 1.2mm thick sheet inclluding one coat red oxide primer on internal and external surface covered with 3mm thick hylam brand IS-2036 marked laminated sheet cover (for Mounting switches, sockets, regulators etc), including 1.5 Sqmm PVC insulated (multistrand) FRLS copper conductor continious earth wire for One light point or one fan point controlled by one switch SP 230 Volts Make of Wire : Havells/KEI /HPL

All as per Srl item No 151 above but forOne 3/5 pin 5 Amp socket outlet point controlled by one switch on independent bd. Make of Wire : Havells/KEI /HPL

All as per Srl item No 151 above but for One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board. Make of Wire : Havells/KEI /HPL

All as per srl item No 151 above but using 2.5 sqmm copper conductor cable (multistrand) PVC insulated FRLS (unsheathed) for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed. Make of Wire : Havells/KEI /HPL

S & F Lamp holder insulated body PVC/polycarbonate with back plate suitable for batten fitting complete all as specified and directed. Make Anchor/Cona/Standard

S & F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed. Make Anchor/Cona/Standard

S&F Switch piano, flush type single pole, one way 5 Amp all as specified and directed by Engr-in-Charge. Make HPL/Cona/SSK

S&F Switch piano, flush type single pole, one way 15 Amp all as specified and directed by Engr-in-Charge. Make HPL/Cona/SSK

S&F Socket outlet 2 in 1, 3 pin 5A complete all as specified and directed by Engr-in-Charge. Make HPL/Cona/SSK

S&F Socket outlet 2 in 1, 3 pin 5A and 15 amp flush type complete all as specified and directed by Engr-in-Charge. Make HPL/Cona/SSK

S&F stepped type electronic fan regulator flush type complete all as specified and directed by Engr in Charge. Make HPL/Cona/SSK

S & F LED light fitting fixture 20W, decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly energy efficient ready to use complete all as specified. Make-Havells(LHEXBXPNIN1WO20)/Wipro(LL20-221-XXX-65-NE)/HPL(HLPT51820PCGCW)/Philips (BN021CLED20SPSUCDLGR)

S&F 10 Watt 6000K LED Bulk head luminaries with opal diffuser, etc complete with accessories all as specified and directed.Make - HPL (HLPLEDBH10W(CW))/ Havells/HPL/CG)

S & F LED 10 W (candle /ball type) with B-22 base, complete all as specified and directed. Make -Havells/Philips/Halonix

S & F Sheet Metal enclosure double door for mounting MCBs with 200 A rated bus bar 8 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge . Make Indoasian/L&T/HPL

S&F MCB SPN 63 amp, 240 V, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity all as specified and directed. Make Indoasian/L&T/HPL

S&F single pole MCB 6 TO 32 Amps 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘c’ curve, 10 KA breaking capacity all as specified and directed. Make Indoasian/L&T/HPL

M & L for submain wiring with two single core PVC insulated flexible copper conductor cable of sze 2x 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 2.5 Sqmm as earth lead in and including PVC conduit/casing and capping and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in- charge. Make of Wire : HPL/Havells/KEI

M/S Tajamul Ah Buchh

M/S Gh Qadir

M/S MUSHTAQ AHMAD BHAT

M/S Vivek Gupta and Co

M/S ZENITH TRADE LINK