SPECIAL REPAIR TO CHAIN LINK FENCE AT VARIOUS PLACES AT AF STATION SONEGAON

Amount

Dismantling posts or struts (woods, steel or RCC) any section including taking out embedded portion in concrete/ brick work masonry etc and making good disturbed ground complete all as specified and directed by Engineer in charge

Dismantling of chain link fencing wire mesh or barbed wire any type as directed by Engineer in charge.

Excavating in post holes (or similar holes) each n exc 0.5 cum and getting out, removing soil to a distance n exc 50 m and making good surface in soft/loose Soil

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil

S&F mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting welding and similar work conforming to Fe-290 Gde E-165 etc complete all as specified & directed.

M & L for cement concrete type C-2, 1:3:6 as in foundation, filling and mass concrete (Using 40mm graded stone aggregate complete all as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering as directed by EIC

Removing excavated materials exc 500m and upto 1.5 Km and depositing where directed at a level n.exc 1.5 m above the starting point.

Fixing only chain link fencing including line wires of any dia, any mesh size and type to any types of starndards, rails, straining bolts etc including provision of binding wire complete Notes : Chain link fencing, nut bolts, shall be measured separtely under supply only rate

Supply only MS Galvanised chain link fencing any size or type approved mesh size etc complete all as specified & directed. Note : Weight of chain link fencing will be assessed at site through BOO to be convened by AGE (I) before incorporction and mesurement of work.

Supply only mild steel screw bolts 5 to 10 mm dia (machine made) with hezagonal or square at one end and screwed the other ends and fitted with washers and one hezagonal or squre nut exc 5 cm but not 10 cm long

Supply only 10mm dia mild steel round bars confirming to Fe-290(grade E-165) in required length for chain link fencing complete all as specified and directed

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed

Taking down and refixing in same position after replacing of damaged of fencing post concertina coil any dia reinforced punched(chrome razor or blade wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/Clips for tying at crossing complete all as specified and as directed by Engr-in-Charge.

M & L for Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm and n exc 250 sq cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed

Material and labour for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Material and labour for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

M&L Preparation of new steel and iron surfaces of any description, not exc 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide zinc primer.

M&L Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide zinc primer.

Demolition of Brick work or stone/ boulder masonary built in Cement mortar and removing from site complete all as directed by Engineer in Charge.

M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built i inCM (1:4) all as specified.

M&L for old size Brick (except bricks using old bricks from demolition) work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in built in CM 1:4 all as spd

M&L for 15mm thick rendering CM 1:4 on fair faces of brick work finished as per manufacturer's instruction.

M&L Preparation new plastered surfaces of walls and applying two coats of cement base paint all as directed by Engineer-In-Charge.

M&L PCC (1:2:4) type B-1, using 20mm crushed stone agregate as in coping benching etc

M&L mild steel framed work of ornamental and intricate design such as in door and gates, framed & hung as gate, including pintel hinges, stops, hand made sliding bolts etc with end of bars shoulded and rivetted or forged into spikes, framed gaured bar, complete all as specified and directed.

S & F heavy duty MS ball bearing 100mm Dia min incld fixing channel in ground firm with angle iron not less than 5mm thick for roller plate in double for gate complete all as specified and directed

M&L for 100mm dia high density polythene pipes (HDPE) of pressure rating 6 Kgf/Cm sq laid in or inserted in brick wall for weep holes complete all as specified and directed.

M&L 15 mm thick granite tile slab (in black colour) of any size and approved in vertical surface laid over and including 15 mm thick cement screed base of CM 1:3 and jointed with black cement slurry with pigment to match the shade incl grinding and polishing complete all as specified and directed.

Material and labour chequred cement concrete tiles of size 30cm x30cm and 25mm thick jointed and pointed in neet cement slurry with grey cement and pigment to match the shade over and including screed bed 20mm in CM (1:4) incld dismantling of old tiles

Material and labour Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Gradef approved design & colour laid over and including 40mm thick layer of sand cushion incld dismantling of old tiles as directed by Engr-in-charge.

Material and labour for 100mm thick PCC (1:2:4) type B1 (using 20mm stone aggregate )as in floor finished even and fair complete incld demolition of old concrete.

Earth work in excavation of all kinds of soils by mechanical means (hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified and directed by Engineer-incharge.

M & L for preparation of old steel surfaces of any description over 10 cm in width or grith and applying one coat of synthetic enamel paint all as specified and directed by Engineer in Charge.

M&L for one coats of cement based paint on old decorated walls incl preparation of surface.

S&F Pre -painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering with cladding to wall,fixed with self tapping screwed as specified and directed by EIC.

Dismantling of framed work such as grills grating etc with ends of bar shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders ,framed baluster, walk ways, railing frame work of water tanks and similar work complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

NORTH INDIA PEST CONTROL (BID ID -3473299)

M/s JAYPEE ENTERPRISES (BID ID -3463236)

GUPTA ENGINEERING WORKS (BID ID -3468611)