REPAIRS TO GENERATORS,LT FEEDER PILLAR BOXES,APFC PANELS AND ALLIED WORKS UNDER GE PANAJI

Amount

Material and labour for servicing of DG set of following capacity through OEM or their authorised service centre including replacement of fuel filters,oil filters,air filter element,changing oil,cleaning fuel lines,checking leakage and repairing it,replacement of exhaust manifold gasket etc all as specified and directed :-(NOTE:Servicing of DG set shall be carried out by service engineers of authorised dealer/service centre of OEM, ie.Kirlosker/Greaves/Cummins only)

Material and labour for servicing of DG set with AMF panel acoustic type of following capacity through OEM or their authorised service centre including replacement of fuel filters,oil filters,air filter element,changing oil,cleaning fuel lines,checking leakage and repairing it,replacement of exhaust manifold gasket , rewiring/repairing of AMF panels etc all as specified and directed :-(NOTE:Servicing of DG set shall be carried out by service engineers of authorised dealer/service centre of OEM, ie.Kirlosker/Greaves/Cummins only)

Supply and fixing in repair the following spares in replacement/fixing at site for DG sets/AMF panels

Fuel flexible pipe wire braded,1,1/4''to 3/8''PVC best quality.

Oil pressure gauge complete.

Oil pressure Switch complete.

Water temperature gauge

Ignition switch

Indicating lamp

Battery terminal heavy duty of brass.

Distilled water.

Coolant for radiator.

Element air cleaner for 125 KVA DG set

Element air cleaner for 100KVA DG set

Element air cleaner for 62.5 KVA DG set

Element air cleaner for Upto 20 KVA DG set

Element air cleaner for Upto 10 KVA DG set

Oil filter

Fuel filter set.

Engine oil premium blue 20W 40

Fan belt.

Self starter 12 volts

Self starter 24 volts

Air Filter

Gasket Set)

Asbesto rope

Supply and fixing in repair the following spares in replacement/fixing at site for AMF panels etc complete all as specified and directed

Line voltage monitor meter for 125 KVA DG set

Line voltage monitor meter for 62.5 KVA DG set

Line voltage monitor meter for Upto 30 KVA DG set

Line voltage monitor meter for Upto 10 KVA DG set

Microprocessor for 100 to 125 KVA Dg Set Make: kirlosker

Microprocessor for 63 KVA Dg Set.Make: kirlosker

Microprocessor for up to 30 KVA Dg Set :Make: kirlosker

Microprocessor for up to 10 KVA Dg Set :Make: kirlosker

OD DC timer

Under voltage relay

Time Delay relay Make:CH

Announciator

AVR for 125 KVA DG Set

AVR for up to 82.5 KVA DG Set

AVR for 63 KVA DG Set

AVR for 50 KVA DG Set

AVR for up to 30 KVA DG Set

CT's coil 5/150 for 125 KVA DG Set

CT's coil 5/50 for up to 63 KVA DG Set

CT's coil 5/150 for 50 KVA DG Set

CT's coil 5/50 for up to 30 KVA DG Set

Contractor 250Amps for 125 KVA DG set . Make:L&T ,Siemens

Contractor 200Amps for upto 62.5 KVA DG set Make:L&T ,Siemens

Contractor 63 Amps for upto 63 KVA DG set . Make:L&T ,Siemens

Contractor 63 Amps for upto 30 KVA DG set. Make:L&T ,Siemens

Battery Charger

Dynamo

Relay Cardboard for 62.5 KVA DG set. Make:L&T ,Siemens

Relay Cardboard for upto 63 KVA DG set. Make:L&T ,Siemens

Relay Cardboard for up to 30 KVA DG set. Make:L&T ,Siemens

Single phase preventor

Material and labour for cleaning and descaling of radiator assembly DG set of following capacity by using suitable chemical (MAC solution) and by blower fan and by injecting water in high pressure in water tubings so as to remove all dirts etc in the fins complete all as specified and directed .

Up to 35 KVA

Material and labour for dismantling defective volt meter and replacement of new voltmeter digital type etc in the fins complete all as specified and directed . Make:AE/Conzeve /HPL

Material and labour for dismantling defective Ammeter and replacement of new ammeter digital type complete with CT'S etc complete all as specified and directed .Make:Make:AE/Conzeve /HPL

Material and labour for in replacement for frequency meter analog type E/Conzeve /HPL

Material and labour for replacement of battery 12 volts,150 AH complete etc all as specified and directed. Make:Exide /Amaron

Material and labour for replacement of battery 12 volts,90 AH complete etc all as specified and directed. Make:Exide /Amaron

Material and labour for in replacement for on load changeover switch of capacity 250 amps 4 pole including removing old changeover switch any type and necessary fixing on wall/in LT panel etc all as specified and directed. . Make:Havells ,C&S,L&T

Supply and fix in repair of unserviceable radiator of following capacity DG sets:-

Up to 30 KVA

Supply and fix in repair of unserviceable MCCB,s of following capacity :-

200 Amps 4 pole 50 KA Make Legrand ,Scinider,C&S

100 Amps 4 pole 16 KA Make Legrand ,Scinider,C&S

63 Amps 4 pole 10 KA Make Legrand ,Scinider,C&S

Supply and fixing in replacement stop sollenoid for 20 to 82.5 KVA DG set 12 Volt

Supply and fixing in replacement stop sollenoid for 82.5 to 200 KVA DG set 24 Volt

Supply, install ,testing and commissioning of cubical indoor LT panel board in repair of CPRI approved platform mounted factory made totally enclosed dust and vermin proof (protection class IP-54) double shutter front and back opening with locking arrangement complete made of angle iron 50 mm x 50 mm x 6 mm thick frame work and 2.00 mm thick MS sheet duly painted with two coats of synthetic enameled paint of approved colour over a coat of red oxide primer over outside and inside complete. The panel board shall be suitable for 400 Amp capacity, 415 volt 50 Hz, 3 phase, 4 wire system with epoxy type 600 A aluminium bus bar of appropriate size and internal wiring complete with PVC insulated multi stranded copper conductor cables etc all as specified and directed with following requirements.

INCOMMING :-(i) MCCB 200 Amps, 4P ,36 KA, 415 volts –01Nos

OUT COMMING :-(i) MCCB 200 Amps, 4P ,36 KA, 415 volts –01Nos

(ii) MCCB 100 Amps, 4P ,36 KA, 415 volts –02 Nos

(iii) MCCB 63 Amps, 4P ,25 KA, 415 volts –02 Nos

(iv)Indicating Lamp LED Type-01 set.

(vii)Spare way for 100 A MCCB.

Supply, install ,testing and commissioning of cubical indoor LT panel board in repair of CPRI approved platform mounted factory made totally enclosed dust and vermin proof (protection class IP-54) double shutter front and back opening with locking arrangement complete made of angle iron 50 mm x 50 mm x 6 mm thick frame work and 2.00 mm thick MS sheet duly painted with two coats of synthetic enameled paint of approved colour over a coat of red oxide primer over outside and inside complete. The panel board shall be suitable for 400 Amp capacity, 415 volt 50 Hz, 3 phase, 4 wire system with epoxy type 600 A aluminium bus bar of appropriate size and internal wiring complete with PVC insulated multi stranded copper conductor cables etc all as specified and directed with following requirements.

INCOMMING :-(i) MCCB 100 Amps, 4P ,36 KA, 415 volts –01Nos

OUTGOING:- (i) MCCB 63 Amps, 4P ,25 KA, 415 volts –04 Nos

(ii) Indicating Lamp LED Type-01 set.

(v)Spare way for 100 A MCCB.

Supply, install ,testing and commissioning of cubical indoor LT panel board in repair of CPRI approved platform mounted factory made totally enclosed dust and vermin proof (protection class IP-54) double shutter front and back opening with locking arrangement complete made of angle iron 50 mm x 50 mm x 6 mm thick frame work and 2.00 mm thick MS sheet duly painted with two coats of synthetic enameled paint of approved colour over a coat of red oxide primer over outside and inside complete. The panel board shall be suitable for 400 Amp capacity, 415 volt 50 Hz, 3 phase, 4 wire system with epoxy type 600 A aluminium bus bar of appropriate size and internal wiring complete with PVC insulated multi stranded copper conductor cables with following requirements.

INCOMMING :-(i) MCCB 160 Amps, 4P ,36 KA, 415 volts –01Nos

OUTGOING:-(i) MCCB 100 Amps, 4P ,36 KA, 415 volts –03 Nos

(ii) MCCB 63 Amps, 4P ,25 KA, 415 volts –04 Nos

(iii) Indicating Lamp LED Type-01 set.

(vi)Spare way for 100 A MCCB.

Supply, install ,testing and commissioning of cubical indoor LT feeder Piller in repair of CPRI approved platform mounted factory made totally enclosed dust and vermin proof (protection class IP-54) double shutter front and back opening with locking arrangement complete made of angle iron 50 mm x 50 mm x 6 mm thick frame work and 2.00 mm thick MS sheet duly painted with two coats of synthetic enameled paint of approved colour over a coat of red oxide primer over outside and inside complete. The panel board shall be suitable for 400 Amp capacity, 415 volt 50 Hz, 3 phase, 4 wire system with epoxy type 600 A aluminium bus bar of appropriate size and internal wiring complete with PVC insulated multi stranded copper conductor cables etc all as specified and directed with following requirements.

INCOMMING :-(i) MCCB 160 Amps, 4P ,36 KA, 415 volts –01Nos

OUTGOING:-(i) MCCB 100 Amps, 4P ,36 KA, 415 volts –01 Nos

(ii) MCCB 63 Amps, 4P ,25 KA, 415 volts –02 Nos

(iii)Indicating Lamp LED Type-01 set.

(vi)Spare way for 100 A MCCB.

Material and labour for earthing in repair complete with galavinised steel earth plate electrode 60cmX60cmX6.3mm thick burried directly in ground ( earth pit not less than 2.25 mtrs. Deepbelow ground level ) with top edge of the plate not less than 1.5mtrs,below normal ground level connected to Aluminium strip 32mmx6mm as earthing lead by means of nuts, bolts, checknuts and washers of galvanised iorn ( or )steel all as shown in electrical plate No.5 of SSR part I and testing complete including excavation and earth work in any type of soil/sock. GI pipe lightgrade 20mm for watering with GI protection pipe 15mm bore light grade upto7.5 mtrs.GI pipe, light grade 20mm for watering with GI funnel, wire mesh PCC (1:3:6 ) type C1 for earthing pit chamber, CI cover complete all as directed and specified.

Prabha Electricals and Communications