Koth Kalan Augmentation of water supply scheme, Construction of 2nd water works with F.H.T.C. Under Jal Jeevan Mission in village Koth Kalan Distt. Hisar

Amount

Providing and fixing floating arms 200mm i/d complete in all respect

Supply and erection of Horizontal spindle spilit casing type pumping sets of minimum Four (4) star rating duties directly coupled to Ac squirrel cage induction type motor with 1440 RPM, 3 phase, 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. "A) Clear Water Pump for boosting station 500 LPM, 25 Mtrs. Head "

B) Clear Water Pump at boosting station 500 LPM, 30 Mtrs. Head

Water works No.2 "A) Raw Water Pump 900 LPM, 12 Mtrs. Head "

B) Clear Water Pump 700 LPM, 40 Mtrs. Head

At water works for filling boosting station C) Clear Water Pump 500 LPM, 25 Mtrs.

Supply and Fixing following CI D/F pipe and specials/Bell Mouth including cost of joining materials, laying, jointing, refilling inckuding making adequate support of masonry/ concrete for delivery and suction pipe from bell mouth in the collecting tank upto the rising main laid by the Department as per plan shown from the foundation wall of pump chamber for all the raw water and clear water puping sets at water works in position, as per specification given in schedule No. II. A) CI D/F pipes I. 100 mm i/d

II. 150 mm i/d

Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500X1200mm and 400mm deep having following accessories:- 1. Incomer switch 200 Amp. 2. Aluminum bus bar chamber of 300 Amp. Capacity. 3. Volt meter 100X100mm range 0 to 500 V (AE/KAPPA/L & T ) 4. Indicating lamp-one set.

A)Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200X900mm and 400mm deep having following items:- At water works :- A) For clear water pump sets for 500 LPM x 25 M head = 1 Nos. (a) Main switch 100 Amp. 1 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 1 No. (AE/KAPPA/L&T) (c) Amp. meter 100X100 mm range 0 to100 Amp. 1 Nos. (AE/KAPPA/ L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS & ASS 1 No. each of approved make (f) SPP 1 No. of approved make (g) Motor starter, star delta 1 Nos. for 500 LPM x 25 M Head Motor (L&T Simens, AAB) (h) Capacity KVAR as per site requirement (i) Indicating Lamp-One Set ( j) Change over switch 100 Amp. = 1 No.

B)Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200X900mm and 400mm deep having following items:- At Boosting Stations :- A) For clear water pump sets for 500 LPM x 30 M head = 1 Nos. (a) Main switch 100 Amp. 1 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 1 No. (AE/KAPPA/L&T) (c) Amp. meter 100X100 mm range 0 to100 Amp. 1 Nos. (AE/KAPPA/ L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS & ASS 1 No. each of approved make (f) SPP 1 No. of approved make (g) Motor starter, star delta 1 Nos. for 500 LPM x 30 M Head Motor (L&T Simens, AAB) (h) Capacity KVAR as per site requirement (i) Indicating Lamp-One Set ( j) Change over switch 100 Amp. = 1 No.

At 2nd Water Works "A)Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200X900mm and 400mm deep having following items:- At water works :- A) For Raw water pump sets for 900 LPM x 12 M head = 1 Nos. (a) Main switch 100 Amp. 1 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 1 No. (AE/KAPPA/L&T) (c) Amp. meter 100X100 mm range 0 to100 Amp. 1 Nos. (AE/KAPPA/ L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS & ASS 1 No. each of approved make (f) SPP 1 No. of approved make (g) Motor starter, star delta 1 Nos. for 900 LPM x 12 M Head Motor (L&T Simens, AAB) (h) Capacity KVAR as per site requirement (i) Indicating Lamp-One Set ( j) Change over switch 100 Amp. = 1 No.

B)Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200X900mm and 400mm deep having following items:- At water works :- A) For clear water pump sets for 700 LPM x 40 M head = 1 Nos. (a) Main switch 100 Amp. 1 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 1 No. (AE/KAPPA/L&T) (c) Amp. meter 100X100 mm range 0 to100 Amp. 1 Nos. (AE/KAPPA/ L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS & ASS 1 No. each of approved make (f) SPP 1 No. of approved make (g) Motor starter, star delta 1 Nos. for 700 LPM x 40 M Head Motor (L&T Simens, AAB) (h) Capacity KVAR as per site requirement (i) Indicating Lamp-One Set ( j) Change over switch 100 Amp. = 1 No.

C)Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200X900mm and 400mm deep having following items:- At Boosting Station :- A) For clear water pump sets for 500 LPM x 25 M head = 1 Nos. (a) Main switch 100 Amp. 1 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 1 No. (AE/KAPPA/L&T) (c) Amp. meter 100X100 mm range 0 to100 Amp. 1 Nos. (AE/KAPPA/ L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS & ASS 1 No. each of approved make (f) SPP 1 No. of approved make (g) Motor starter, star delta 1 Nos. for 500 LPM x 25 M Head Motor (L&T Simens, AAB) (h) Capacity KVAR as per site requirement (i) Indicating Lamp-One Set ( j) Change over switch 100 Amp. = 1 No.

Supply, erection, testing of standard make wiring of 10nos. motors with underground system in PVC and flexible pipes copper wire size 6 Sq mm complete in all respects with accessories like thimble etc. complete in respects.

Supply, erection, testing of standard make wiring of 10 nos. motors with underground system in PVC and flexible pipes copper wire size 4 Sq mm complete in all respects with accessories like thimble etc. complete in respects.

Supply, erection, testing of ISI marked copper wire for 5 Nos. panel boards from main switch to panel and wiring of panel with size 10 Sq. mm copper wire ISI marked complete in all respect with accessories like thimble etc. complete in respects.

Supply, erection, testing of light fittings including wire in the Pump Chamber with material up to 10 points including switch, button, plug, PVC conduct pipe and Copper wire etc. as per approved specifications complete in respects.

Providing and fixing ceiling fan 1400 mm (56") with speed adjuster of reputed make (make Crompton, Usha, Bajaj, Orient) complete in respect..

Providing and fixing exhaust fans 18"i/d (450mm) complete with suitable GI sheet of approved make complete in respects

Providing, laying, jointing and fixing of cast iron "V" notch with dully makred with beam including embedding in 1:2 cement and grouting, levelling up to finishing complete in respects.

Supply, erection, testing of reputed make LED vapour light 100 watts with fitting and accessories complete in respects.

Supply erection of "Wall Mounting type, solenoid driven, motor-less, electro-magnetic disphragm Dozing Metering pump working on single -phase 220/240 V. / 50 Hz, electric supply with standerd electronic controls, suitable for minimum dozing capacity 0-5 LPH, at 8 bar back pressur"e complete with necessary accessories. Make Fontus or any other standard make along with supply & erection of supply & erection of 1 No. voltage stablizer with each dozing pump alongwith 1 No. 300 ltrs. capacity ISI marked HDPE storage tank, with each dozing pump of "Sintex" other reputed & approved make.

Supplying, erection, testing & commissioning of Gantry type chain pully for lifting pumping machinery on sump well of capacity 2 Ton consisting required material as per site complete in all respect.

Less credit of Bricks

Less credit of Bats

Making Functional House Hold Tap Connection Providing and fixing in position GI Elbow ISI marked 1327nos. X 4 = 5308 nos.

Providing and fixing in position GI Nipple ISI marked 1327nos. X 2 = 2654 nos.

Operation and maintenance for the complete scope of work mentioned in the DNIT (Disinfection material supplied by the PHED) as per Schedule IV for a period of 5 years after 12 months during defect liability period 3 months trial run (will be charged to the A/Mtc. estimate) Operation and maintenance during defect liability period operation only

(i) Operation and maintenance during the 1st year after defect liability period

(ii) Operation and maintenance during the 2nd year

(iii) Operation and maintenance during the 3rd year

(iv) Operation and maintenance during the 4th year

(v) Operation and maintenance during the 5th year

Bidder Name

Amount

Himmat Singh Contractor(GSTN-NA)

ROHTASH KUMAR CONTRACTOR(GSTN-NA)

Himmat Singh Contractor

Himmat Singh Contractor