Loading
Loading…
Loading…
Tender Value
₹11.0 L
EMD Value
₹22,033
Closing Date
16 Jun 2026, 11:00 amDue tomorrow
Executive Engineer
Executive Engineer, MCPH-1, Sector 11, Chandigarh
EMERGENT REPLACEMENT OF 24 DIA MS DELIVERY HEADER ALONG WITH OTHER CONTINGENT WORKS AT PUMP HOUSE PHASE I II AT WATER WORKS CHANDIGARH UNDER THE CHARGE OF SDE MCPH SUB DIVISION NO 1 CHANDIGARHCH to Revenue Head
2026_MCC_93179_1
2026_MCPH1_092
Open Tender
Public Health Estate Works
30 days
Chandigarh
Please refer Tender Document
2 documents required · 2 mandatory
₹1,000
₹22,033
Yes
9 Jun 2026
9 Jun 2026
16 Jun 2026
9 Jun 2026
16 Jun 2026
9 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolishing cement concrete manually by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). DSR No. 15.2.1 | 6 | P.cum | 1,200 | ₹7,200 |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. In Cement Mortar. DSR No. 15.7.4 | 1 | P.cum | 1,000 | ₹1,000 |
| 3 | Dismantling the old rusted MS pipe delivery header of 600mm dia along with stub connection 400mm dia by cutting with the help of gas cutter in parts including the cost of cutting of nuts and bolts MS flanges along with T&P required at site complete in all respects. | 1 | P.job | 12,000 | ₹12,000 |
| 4 | Dewatering with the help of 2no. Dewatering pumps for 6 hours including the cost of diesel and transportation (2No.@ 6hour each =12 Hour.) | 12 | P.Hour | 600 | ₹7,200 |
| 5Supply, Etraction & commissioning of following Pipes & specials made H.R. coil/sheet duly arc welded including cutting, welding, jointing including anti- corrosive epoxy painting inside and outside complete in all respects. (make of sheet for pipe shall be TATA/SAIL/WELLSPUN.)(NSI) | |||||
| 5.01 | 100mm dia MS Pipe, 6mm thick | 2 | P.mtr | 2,400 | ₹4,800 |
| 5.02 | 400mm dia MS Pipe, 8mm thick | 3 | P.mtr | 12,000 | ₹36,000 |
| 5.03 | 500mm dia MS Pipe, 8mm thick | 4 | P.mtr | 14,500 | ₹58,000 |
| 5.04 | 600mm dia MS Pipe, 8mm thick | 31 | P.mtr | 17,500 | ₹5,42,500 |
| 6Extra for fabricating/manufacturing bend of required degree by means of cutting, sizing, welding etc. including fixing of same on pipeline with the help of arc welding, including cost of T&P complete in all respect to entire satisfaction of EIC. (Note: cost of barrel/MS pipe required for making bend/Tee and Reducer etc. shall be paid under Item No.5) | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.01 MB
BOQ_114061.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
