Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 CrAccepted-AOC CHENNAI 600 035 | CHENNAI | CHENNAI | TAMIL NADU | 600035 | ₹2.4 Cr | L1 | Accepted-AOC The single and negotiated tenderer |
Tender Value
Refer Docs
EMD Value
₹1.2 L
Closing Date
15 Mar 2023, 6:00 pmClosed
Superintending Engineer/CC
No.132, E.V.R.Salai, Kilpauk, Chennai-10.
Construction of New building for Fire and Rescue Service Station and 2 Nos. of Station Fire Officer Quarters at Vepery in Chennai city. (Re-Tender)
2023_TNPHC_290368_1
SE/CC/DB/887/2020
Open Tender
Civil Works
Lump-sum
240 days
Vepery in Chennai city
Please refer tender documents
7 documents required · 7 mandatory
₹0
₹1.2 L
9 Oct 2023
22 Feb 2023
17 Mar 2023
22 Feb 2023
15 Mar 2023
22 Feb 2023
Amount
1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 mt.
b. 2 to 3 mt.
1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.
b. 2 to 3 mt.
2.1) Filling sand
3.1) C.C.1:5:10 for Foundation & Basement
3.2) P.C.C. 1:2:4 for Foundation & Basement and other similar works
6.2) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")
7.2) Supply and fixing of Bituminous filler pad, 20mm tk. for expansion joint
9.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor/ Stilt floor
b. In First Floor
c. In Second Floor
d. In Third Floor
10.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) a. In Foundation and basement
b. In Ground Floor/stilt floor
c. In First Floor
d. In Second Floor
e. In Third Floor
11.2) Brick work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) a. In Ground Floor
b. In First Floor
c. In Second Floor
12.1) Brick partition in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick a. In Ground Floor
b. In First Floor
c. In Second Floor
13.1) Filling with Excavated Earth
21.2) Teak wood Wrought & Put up a. T.W. over 2 m & below 3m
b. T.W. below 2 m length.
23.3) S&F of Magnetic door catches
25) M.S.Holdfast
26) Flooring in C.C.1:5:10
28) Floor plastering in C.M.1:4, 20 mm tk.
30) Ellispattern
31) Weathering course
33) Plastering in C.M. 1:5, 12 mm tk.
34) Plastering in C.M. 1:4, 12 mm tk.
35) Spl. Ceiling plastering in C.M. 1:3, 10mm tk.
36) Cement mortar Border in C.M. 1:5, 12 mm tk. a. 150 mm wide
b. 75 mm wide
c. 50 mm wide
37.1) White washing 3 coats (slaked)
39) M.S Grills
40) Painting - New "wood work"
41) Painting - New "iron work"
46) S & F 20 mm dia Alu. Hanger Rod
47) S & F Alu Towel rail 75 cm long
48) S & F 5 pin Coat stand
49) S & F chromium plated 8 gauge Picture Hook
50.2) Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm
50.3) Supply and planting avenue trees
50.4) Providing Tree guard
50.5) Supplying, Fabricating and erection of M.S Scheme Name board
52.1) G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls)
53.3) C.I. Steps ( 5 kg)
59.2) Gully Trap using Kiln burnt country bricks 22 x 11 x 7 cm.
60) PVC Nahani trap (4way/2way)
Electrical arrangements 72) Box type Fibre Fan hook
73.2) 4 way - D.B.
74) Charges for fixing of "Fan"
76) 8 SWG wire
77.3) S & F of TV / Telephone line Socket
77.4) S & F of 20mm dia PVC pipe for TV/ Telephone line
78) Earthing Station IS3043 (Type I)
81) Meter cupboard
86) Anti termite treatment
112) S & F of Exhaust Fan 300 mm dia
238) Anticorrosive treatment for steel grills
ANNEXURE 2.15) Supplying and filling stone dust
3.8) P.C.C. 1:4:8 using 40 mm hard broken stone jelly
8.2.3.1) Standardised concrete Mix M30 Grade Concrete a. In Foundation and basement
b. In Ground Floor
c. In First Floor
d. In Second Floor
e. In Third floor
14.3.II) Precast cupboard slab 40 mm tk using standardised concrete mix M30 a. In Foundation & basement
15.4) Cuddappa slab 20 mm tk.for C/B slab. a. Ground floor
b. In First floor
c. In Second floor
15.5) Cuddappa slab 40 mm tk.for C/B slab. a. In Ground floor
b. In First floor
c. In Second floor
16.5) Precast Jally ventilator 50mm tk.using standardised concrete mix M30 without vibrating charges a. In Ground floor
b. In First floor
c. In Second floor
d. In Third floor
18.1) Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,
b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works
c.For Square and rectangular columns and small quantities
d.Vertical wall
f.Curved surface
g.Double centering portico area
21.5.2.2) Supply and Fixing Solid UPVC door Shutter with frame
21.5.6.1) Supplying and fixing of solid core flush door shutter of thickness 35mm a). Door size 1.00m x 2.10m (Single Leaf)
21.6.1.1) R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using M30 grade (without vibrating charges) a. 900 x 2100 mm
22.1.8) TW panelled single leaf door shutter with brass fittings. a. 1000X2100mm (Single leaf)
22.3.3) T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer.
22.3.9) Providing T.W double leaf shutter with 18mm thick BWR Plywood for Cupboard / ward robes shutters (Rest room) Size: 4000x2100mm
23.1.8) TW styles & rails with 9mm thick BWR single leaf shutters with brass screws Size: 900 x 2100 mm
23.5.4.2) Supplying and Delivery of Godrej Navtal / equivalent lock 6 lever with three keys.
29.8) Glazed tiles using Grout (Tile Joint Filler)
29.9) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).
31.4) Finishing the top of Terrace floor with one course of solar reflective Ceramic tiles without base concrete
38.4) Two coat of cement paint over one coat white cement
38.6) One coat white cement for new walls and other similar works.
38.8) Two coat of OBD over one coat white cement for inner walls
43.2.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.(Binding wire insulated with PVC)
44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab using standardised concrete mix M30 grade a). Providing pit
b) Augering 30cm dia
44.5.3) Providing Rain water Harvesting well ring of Circular shape of 90mm dia, 60cm depth using Standardised Mix design M20
44.6.1) PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe(UPVC Special clamp)
45.2) Providing Colour Marble chips of size 10mm and below using 72 Kgs of cement and 0.15 Cum of Colour Marble chips for every 10 Sqm over the existing plastered surface
52.1.1) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials a. 32 mm dia
b. 25 mm dia
52.4) 20mm dia PVC water supply ASTM pipe (fully consealed in walls)
53.4) S & F of C.I Manhole cover 60 x 60 cm (50kg weight )
53.5) Wash Hand Basin of size 550 x 400 mm (white without pedestal)
54.1.2) S & F of 15mm dia Engineering Polymer Tap (long body )
54.2.2) S & F of 15mm dia Engineering Polymer Tap (short body)
56.4.1) S & F of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.
57.1.1) S & F of E.W.C.(White) 500 mm with PVC SWR grade "P" or "S" TRAP
58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.
b. 75 mm dia.
58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.
61.3) UPVC Non Pressure pipe of SN8 SDR 34 ( S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe
b. 160 mm UPVC Non Pressure pipe
62.1.1) PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend
b. 160 mm dia PVC Bend
62.2.1) PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal Tee
b. 160 mm dia PVC Equal Tee
64.1.2) Wiring with 1.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (PVC Box, Fire Retarded Box) a. Light point with ceiling rose
b. Light point without ceiling rose
c. Calling bell point with Buzzer/Calling bell
65.1.2) Wiring with 1.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point. (PVC Electrical Box)
66.1.2) Wiring with 1.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point. (PVC Electrical Box)
67.1) Wiring with 1.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.
68.2.2) Wiring with 1.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places. (PVC Electrical Box)
69.2) Supplying and fixing of 15 Amps 3 pin flush type plug using (PVC Box, Fire Retarded Box)
71.2) Supplying and fixing of 32 AMPS Triple pole main switch
75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Electronic Dimmer
77.5) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
79.8) 3 Nos.of 32Amps - Fuse Unit
80.2) 450 x 375 x 20 mm thick TW plank
82.3) Supply and Fixing 25W LED Street light with fittings
84.3) Run off 2 Wires of 4 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.
87.1) Supplying and delivery of Three phase ELCB/RCCB
93.1) Plastering with CM 1:3, 12mm with WPC
105.2) Run off 4 x 4 Sqmm copper PVC insulated unsheathed single core cable for 3 phase EB service connection
105.3) Run off 4 Wires of 6 sqmm PVC insulated single core multi strand
112.1) S & F of Exhaust Fan 225mm dia
144.2.1) Supplying and fixing of 250 Watts Metal halide Flood light.
155.1) Supply and erection of 125 Amps capacity floor mounting panel board (Cubical type)
160.1) Supplying and laying of 3.5 core 50 sq.mm PVC armoured LTUG cable (below GL)
160.2) Supplying and laying of 3.5 core 50 sq.mm PVC armoured LTUG cable (above GL)
160.3) Supplying and fixing of brass cable gland suitable for 3.5 core 50 Sqmm PVC armoured LTUG cable
164) Supplying and laying of 4x16 sq.mm PVC armoured LTUG cable (below ground level)
164.1) Supply and fixing of brass cable gland for 4x16 sqmm PVC armoured LTUG cable.
171.1.2) Labour charges for the erection of submersible pumpset in borewell/openwell Upto 5Hp
171.2.8) Supply and delivery of Submersible motor pumpset without panel board of 1.5 HP capacity 20 LPMx125m head of electric motor pump set
171.2.9) Supply and delivery of Openwell Submersible motor pumpset 50lpm x 40m
213) Supply and fixing of SFRC Manhole Cover of size 600mm x 600mm
238.1) Anticorrosive treatment for window grills
255.6.2) Supply & fixing of bulk head fitting suitable for 12W bulb
255.7.2) Supplying and fixing of LED Bulb suitable for fixing it to pendent / bakelite battern holder a. 9 watts LED bulb
b. 12 watts LED bulb
344.2) S & F of Bevelled edge mirror 500 x 400 x 5.5mm
359.3.1) Concrete designer tiles flooring
361.5) Vitrified Tiles flooring (Ivory)
367.1) Providing wooden Melamine polish for new wood work
379.7.1.1) Providing PVC beeding of suitable size & colour for corner of wall tiles
379.4.4) S & F of Granite slab of size 4'x2', 18 to 20mm Thick For kitchen arrangements (jet black) b. In First floor
c. In Second floor
382.1) S&F of Cuddapah sink 600 x 600 x 200mm
383.2) Providing nosing to the edges of Granite slab
383.4) S&F of PVC flushing cistern
448.2) Providing 32mm dia PVC Tee with end cap
450) Supply and fixing of 160 mm dia PVC top end cap for borewell
451.1) Supplying and fixing of CP Angle cock
501.2) Supplying of Aluminium ladder 15 feet length (Heavy)
504) Supply and delivery of 12mm thick Nylon rope
505) Supplying, laying, fixing and jointing of 40mm dia UPVC pipe (Below Ground level)
506) Supplying, laying, fixing and jointing of 40mm dia UPVC pipe (Above Ground level)
609.6.1) Supply and delivery of 150mm OD PVC casing pipes (6kg/cm2) as per IS 12818/1992 of approved quality for borewells
609.6.2) Supply and delivery of 150mm OD PVC Ribbed screen pipes (6kg/cm2) as per IS 12818/1992 of approved quality for borewells
609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) a) 150mm dia casing pipes assembly.
615.3.1) Supplying and Fixing of MS fabricated DOL 5 HP Panel control Board of wall mounting type with ISI mark (Three Phase)
615.3.5) Supplying and fixing of single phase panel board, DOL 1.5 HP with two level guard and auto start
616.4.5) Supply & fixing of following HDPE pipes for Submersible pump in Borewell class 5. a) 40mm dia
619) Supplying and laying of the following GI pipes and GI specials a) 80mm dia GI pipe
b) 80mm dia GI bend
c) 80mm dia GI coupling
d) 50mm dia GI Union
e) 50mm dia G.I. Pipe
f) 50mm dia G.I. Bend
g) 50 mm dia GI coupling
619.2) Supply and fixing of following dia GM Gate Valve a) 50mm dia GM Gate valve
619.9) Supplying and fixing of following dia GM Non return Valve a) 50mm dia GM non return valve
707.3.1) Supplying and fixing of 3 core 4 sqmm PVC insulated and unsheathed flat type copper cable
741.8) Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in Flush with wall with earth connection ( For AC Plug) approved / Superior variety
799.1.1) Drilling of borewell anywhere including transportation from one place to another place in alluvial soil or sedimentary starta mud circulation method 150mm dia (a) Drilling of borewell in upto 60m
799.1.2) Drilling of 150mm dia vertical bores in hardrock formation to any required depth using "DTH Rig" (a) Drilling of borewell in rock area (DTH)
799.2.1) Reaming of borewell from 150mm dia pilot bore up to 300mm dia bore (a) upto 60m depth
(b) above 60m to 90m
799.3.1) Charges for developing the borewell for the entire depth with air compressor of 300cfm capacity [Minimum 8 hours]
828.1) Supply and laying of Hard core layer 200mm thick
832.5.2) Supplying and fixing in position of UPVC window of casement type (open)
832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes
960.4.5.1) Supply & fixing of 18 watts LED Tube Light of 4' long (Crystal glass)
961) Supplying and fixing of Aluminium TNPHC Emblem of 18" height
961.1) Supplying & fixing of Aluminium Letters with approved colour coat in finishing matt a. 12" height
b. 9" height
961.2) Supplying and fixing of plastic foam name plate with vinyl cutting letter with approved colors etc., a. Size - 20" x 5"
b. Size - 24" x 8"
961.3) Supply and fixing of 5" dia plastic foam plate of 3mm tk with 3" height numbers
Bidder Name
P.MANOHARAN
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_344826.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .