CERTAIN REPAIRING TO FLOOR,WALL, CEILING, STAIRCASE IN OTM AND MD ACCN AT ZONE A AREA AT BB CANTT, SRINAGAR

M&L for 6mm thick Veneered decorative plywood, grade 1(with BWR resin) with decorative face veneers on one face, fixed with screws to timber frame work, fixed in ceiling incl dismantling of old ceiling boards (fiber pulp, insulation, etc..) or insulation boards/slabs, any thickness, including cover fillets, complete all as specified and directed.

M&L for Australlian wood panelling for wall and ceiling 10mm thick including 9mm thick BWR plywood on the wall/ceiling and finally finishing with french polish (two or more coats) and fixed including dismantling old wooden boarding/ceiling fixed in any position, complete all as apecified and directed.

S&F aluminiun anodised snap grid ceiling of frame size 600x600mm, main Tee section of size 36.5mmx25mm x1.4 mm thick, cross Tee section of size 23.5mm x26.4 mm x1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders including 4mm thick E board ceiling HPSC fixed to aluminium frame complete as per manufacturer's instructions incl dismantling of old ceiling boards (fiber pulp, insulation, etc..) or insulation boards/slabs, any thickness, including cover fillets, complete all as specified and directed.

S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work in any type of MS steel section conforming to Fe 410-0 or Fe 310-0 incl dismantling wrought iron or mild steel work of any position and description, complete all as specified and directed.

M & L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Taking down chowkats or frames n exc 1.5 Sqm each ( without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n. exc 4.00 Sqm each( without taking off shutters from the frames), complete all as specified and directed.

S&F aluminium window openable/fix type with aluminium anodized frame of section 62.30 x 44.50 x 1.5 mm with shutter stiles rail of aluminum section of size 47.62 x 44.45 x 1.5 mm thick includiing jointing cleat for fixing binder hardware glazing clips rubber packing for air lock purpose anodized aluminum strip bearing screw etc for fixing glass pans in frame shutter covered with fully selected quality tinted glass 5.5 mm thick tinted glass with rubber packing complete including fixing of required 125mm tower bolt and handles etc, complete all as specified and directed.

S&F anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame, glazed with 5.5mm thick tinted glass or ACP sheet including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size,where required double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing brass pivot, mortice lock vertical type of mild steel 4 levers of size 100mm etc as mentioned here in below, complete all as specified and directed:-

S&F Powder coated aluminium decorative grill of size of mesh 75mm fixed with doors, window for safety of glass etc. complete all as specified and directed.