8846/E8

Amount

Dismantling boarding any description fixed in any position with screws and removing unserviceable material out side cantt area complete all as specified and directed.

S&F maple laminated wooden flooring in size 1227mm x 197mm x 8mm thick including flooring, breakers etc. complete all as manufactures instruction with a layer foam backing complete.

Dismantling cast iron work of any description complete all as specified and directed.

M&L MS rolled section of grade Fe-410-W (Gde - E-250), quality - A (beam, tee, angle channel or flat sections) as in roof trusses (framed), trussed purlins, crane gantries rails, and fastening and heavy bracket framing including distance pieces, cleats etc. complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor and finishing the surfaces fair and even without using extra cement all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match compete all as specified and directed. (Note : Screed bed or bedding layer shall be measured and paid separately under respective items in this schedule).

M&L Vitrified Ceramic tiles of dark shade, 10mm thick (Square or Rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floors, set and Jointed in neat cement slurry and pointed in coloured cement to match the tiles, complete all as specified and as directed. (Note : Screed bed or bedding layer shall be measured and paid separately under respective items in this schedule)

M&L screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish complete all as specified and as directed.

M&L 10 mm thick plastering in cement mortar 1:4 brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in screed bed of tiles.

M&L coloured Glazed ceramic designer seamless tiles 300x 450x 7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. (Note : Screed bed or bedding layer shall be measured and paid separately under respective items in this schedule).

M & L aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed.

S&F anodised aluminium door shutters side hung type with styles, rails (Top, bottom and lock rails) all are made from anodised aluminium section weighting 0.55 kg / m including necessary jointing cleats, glazing clips, rubber neoprene packing, anodised, aluminium snap beadings, screws suitable sizes aluminium door hinges, door stopper, aluminium handles 2 Nos in each door complete all as specified & directed.

S&F anodised aluminium window / ventilator shutters, sliding type with styles, rails, sash bar, sliding frame etc. all are made from anodised aluminium section all are made from anodised aluminium section weighting 0.55 kg / m including necessary jointing cleats, glazing clips, rubber packing, anodised, aluminium snap beadings, screws , aluminium handles, etc complete all as specified and directed.

S& F anodised aluminium grill, 10 mm thick, diamond shape with aperture 75 mm fixed to window complete all as specified and as directed.

S&F mild steel flat iron as in hold fast for door window frames or chowkat etc. cut to length or drilled hole and fixed with screw etc. complete all as directed grade of steel conforming to Fe-290 Gde-E-165

M&L PCC 1:3:6 type C1(20 mm graded stone aggregate) as in bed block for embedding hold fast of doors, window frames or chowkats including necessary form work complete all as directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete all as specified and as directed.

S&F 5.5 MM thick sheet glass ordinary quality alongwith EPDM rubber all around the glass edges exc 0.5 sqm in each pane and fixed into aluminium frame work complete all as specified and as directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.

S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified in and directed.

S&F 35 mm thick flush shutters solid core construction, with particle board core and ply wood face panels commercial type on both sides complete all as specified and as directed.

S&F factory made solid PVC door Frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet and edges will be painted to match with printed sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page no. 160 of SSR Part -II complete all as specified and directed.

S&F factory made PVC solid door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock, bottom rail on either side & as gap insert for top & bottom rail, pannelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles& rails with suitable PVC together with solvent cement in the frame at site as per specification & instruction etc.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F Extruded aluminium alloy handles 150 mm long cast type anodised complete all as specified and directed .

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F Extruded aluminium alloy handles 100 mm long cast type anodised complete all as specified and directed .

S&F MS butt hinges medium weight cold rolled of size 125 mm complete all as specified and directed.

M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of old wooden surface over 10 cm width or girth not otherwise described and applying a coat of synthetic enamel paint complete all as specified and directed

M&L preparation of old painted steel surface over 10 cm width or girth not otherwise described and applying a coat of synthetic enamel paint complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.

M&L 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof walls etc. complete all as specified and directed.

M&L Granite (of any type) slab, 18 to 20 mm thick machine cut as in steps, jambs, pillars, window cills, cooking platform and like laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing complete all as specified and directed (Note :- Screed bed shall be measured and paid separately under respective item)

Taking down cement plaster on brick or concrete wall etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 15 mm thick rendering on brick or concrete surfaces of wall in CM 1:4 and finished even and smooth without using extra cement complete all as directed.

M&L rendering 15 mm thick in CM 1:6 on brick/ concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed .

M&L preparing new surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistance primer complete all as specified and directed.

M&L preparation of old plastered or unplastered surfaces of wall applying one coat of oil emulsion distemper over a coat complete all as specified and directed.

M & L preparation of old plastered surfaces of walls and applying one coat of exterior emulsion paint (weather coat) over a coat of alkali resistance primer complete all as specified and directed.

S&F 10 Litre capacity PVC valve less syphonic action type dual flush type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed including taking down old one (Make Parryware, Model -slimline economy dual flas or equivalent in CERA / Hindware / Jaquar).

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F 15 mm dia steel water tube medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F 20 mm dia steel water tube medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and directed.

S&F vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete complete all as specified and directed including taking out old one.

S&F sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F PTMT grating dome 100 mm dia (minimum weight 25 gms) complete all as specified and directed including taking out old one.

&F 15 mm dia pillar taps, cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without letter 'Hot' or Cold' with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed including taking out old one. (Make : Jaquar model no CON-011KN or equivalent in Marc / Cera / Kohler)

S&F vitreous China urinals, half stall type, flat back of size 465 x 355 x 65 mm (minimum) white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinals against wall in CM (1:2), screwing urinal to plug etc. complete all as specified and directed .

S&F vitreous China Wash Basin, white,oval shape of size 550 mm dia including suitable size of CI brackets, brass chromium plated waste fittings 32 mm dia with long screw shanks and fly nuts, flange and bedded in red lead cement with 02 Nos PVC connection (one for cold water & one for hot water) of size (15 x 450) mmwith PTMT nuts and PVC washer and 2 nos chromium plated fancy type angle valve 15 mm dia bore complete all as specified and directed including taking down old one.

M&L water proofing treatment on existing cleaned RCC roof comprising with the following operation and as specified here-in-below :- (a) 10 mm thick plastering in cement mortar 1:4 finished plastered surfaces even and smooth. The plastered surface shall be cured properly for seven days by ponding of water over roof. (b) Preparing and cleaning of fully dry cement plastered surface as per IS-3067-1966. (c) Applying bitumen primer conforming to I.S 3384 - 1986 over the plastered surface @ 0.3 Litre Per Sqm. (d) Applying evenly one coat of blow hot bitumen of grade 85 / 25 @ 1.2 kg per Sqm on primed surfaces. (e) A layer of APP bases polymeric membrane, 3 mm thick (minimum), weighing 3.5 Kg/Sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (f) Applying one coat of Aluminium paint @ 0.1 ltr per Sqm over APP based polymetric membrane complete all as per manufacturer's instruction.

S&F stop valves (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking down old one.

S&F 125 mm dia brass chromium plated shower rose fixed to steel pipe or union complete all as specified and directed including taking out old one. (Make : Jaquar model no OHS-1789 or equivalent in Marc / Cera / Kohler).

S&F 15 mm bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one. (Make : Jaquar model no CON-037KN or equivalent in Marc / Cera / Kohler)

S&F rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position of 500 Litre capacity all as specified in SSR and as directed including taking down old one.

S&F PTMT grating dome 125 mm dia (minimum weight 40 gms) complete all as specified and directed including taking out old one.

Taking out copper/aluminium point wiring cable from existing concealed conduit point wiring (light, fan, socket or power) complete, including fixture such as switches, ceiling roses, pendants, regulators, sockets, etc. removing materials from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. (Note:- Disturbed surfaces of wall shall be make good by applying two coats of OBD over a coat of wall care putty over cement mortar plaster (1:3) where necessary to match with existing surface finish)

Taking down sub main wiring with aluminium / copper conductor cable of any size drawn through rigid conduit / casing capping etc. (surface/concealed) including accessories etc. complete all as specified & directed

M&L point wiring with 1.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed HRFR / FRLS copper conductor cable 1100 Volts grade drawn through with and including PVC conduit medium duty (ISI marked) not less than 20 mm dia and all fittings and accessories (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core HRFR / FRLS copper cable as earth continuity wire connecting to common earth point including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC / Plastic laminated sheet. top cover, suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc complete for one light point/ceiling fan / bell point / exhaust fan point controlled by one way switches complete all as specified and directed.

All as per item no.67 above but for one three pin 5 Amp socket outlet on independent board.

M&L point wiring with 2.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed HRFR / FRLS copper conductor cable 1100 Volts grade drawn through with and including PVC conduit medium duty (ISI marked) not less than 20 mm dia and all fittings and accessories (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core HRFR / FRLS copper cable as earth continuity wire connecting to common earth point including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC / Plastic laminated sheet. top cover, suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc complete for 5 pin 15 Amps socket outlet on independent board complete all as specified and directed.

M&L point wiring with 4.0 Sqmm (nominal area), PVC insulated, stranded single core unsheathed HRFR / FRLS copper conductor cable 1100 Volts grade drawn through with and including PVC conduit medium duty (ISI marked) not less than 20 mm dia and all fittings and accessories (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 2.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core HRFR / FRLS copper cable as earth continuity wire connecting to common earth point including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC / Plastic laminated sheet. top cover, suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc complete for 5 pin 15 Amps socket outlet on independent board complete all as specified and directed.

M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps cills, sunshades, shelves, lintels etc. in brick walls and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth complete all as specified & directed.

S&F white cover plate with frame for Modular switch, 1/2 module complete all as specified and as directed. (Make-Legrand 6732 01-02 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F white cover plate with frame for Modular switch, 3 module complete all as specified and as directed. (Make-Legrand 6732 03 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F white cover plate with frame for Modular switch, 4 module complete all as specified and as directed. (Make-Legrand 6732 04 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F white cover plate with frame for Modular switch, 6 module complete all as specified and as directed. (Make-Legrand 6732 06 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F white cover plate with frame for Modular switch, 8 module complete all as specified and as directed. (Make-Legrand 6732 08 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F Modular metal flush box, 1/2 module complete all as specified and as directed. (Make-Legrand 6890 07 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F Modular metal flush box, 3 module complete all as specified and as directed. (Make-Legrand 6890 08 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F Modular metal flush box, 4 module complete all as specified and as directed. (Make-Legrand 6890 09 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F Modular metal flush box, 6 module complete all as specified and as directed. (Make-Legrand 6890 10 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F Modular metal flush box, 8 module complete all as specified and as directed. (Make-Legrand 6890 42 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F white cover plate with frame for Modular switch, 12 module complete all as specified and as directed. (Make-Legrand 6732 12 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F Modular metal flush box, 12 module complete all as specified and as directed. (Make-Legrand 6890 11 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F stepped type electronic fan regulator flush modular type on the existing phenolic laminated sheet etc. as reqd complete all as specified and as directed.

S&F for Power unit 6M flush type with AC starter, 20Amps MCB & 20Amps Plug top with indicator, 6module plate including connection complete all as specified and as directed. ( Make : Northwest Cat No ACPU6M-FT or equivalent.)

S & F metal box 6 Module for mounting power unit complete all as specified and as directed. Make : Northwest Cat No MB06M20GGI or equivalent.

M & L Ceiling rose, surface type polycarbonate/ PVC three terminals, conforming to IS, complete all as specified and as directed.

S&F white blanking plate one module complete all as specified and directed.(Make-Legrand 6730 61 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F modular switch 6 Amps, 240 Volts, single pole, one way, single module conforming to IS complete all as specified and as directed.(Make-Legrand 6730 00 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F modular switch 16 Amps, 240 Volts, single pole, one way, single module conforming to IS complete all as specified and as directed.(Make-Legrand 6730 08 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F modular socket 6 Amps, 2/3 pin, 240 Volts, two modules conforming to IS complete all as specified and as directed.(Make-Legrand 6730 44 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S & F modular socket 6/16 Amps, 2/3 pin, 240 Volts, two modules conforming to IS complete all as specified and as directed.(Make-Legrand 6730 45 or equivalent of CRABTREE, L&T (ORIS), CONTROL & SWITCHGEAR, SIEMENS, ABB, Havells)

S&F wall fan of sweep 300 mm including all accessories, clamps wire etc. to hang the fan in position including provision of cable from ceiling rose to fan complete all as directed.(Make-Orient wall 14 or equivalent of BAJAJ/Havells/Phillips)

M&L Sub main wiring with two runs of 6.0 sqmm (Nominal area) single core PVC insulated stranded unsheathed FRLS copper conductor cable upto and including 1100 V grade drawn through and including rigid PVC non mettalic surface conduit medium duty with conduit accesseries such as junction boxes, bends, tees etc. complete including one run of 4.0 sqmm (nominal area) single core, PVC insulated stranded unsheathed FRLS copper conductor as earth wire and duly connected to common earth point complete all as specified and directed including taking down old one. (Note :-(i) One run of PVC conduit, Two runs of 6.0 sqmm single core cable, one run of 4.0 sqmm earth continuity wire to be measured as one length). (ii) Chase cutting for replacement of defective/ unserviceable concealing conduit by new conduit if ordered, shall be measured & Paid separately under respective item in this schedule.).

Supply and fix sheet steel enclosure TPN DB with 200 amps bus bar with provision for FP MCB as incomer and SP MCB as outgoing , double door type Number of way 4, No of module 8 + 12, complete all as specified and directed. (Make Legrand cat No 6077 15 or equivalent equiv in Schneider /L&T)

Supply and fix sheet steel enclosure SPN DBs with 200 amps bus bar, 8 way, for MCBs with din channel, Earth bar and neutral bar etc. complete all as specified and directed . ( Make Legrand cat No 6077 11 or equivalent equiv in Schneider /L&T)

Supply and fix sheet steel enclosure SPN DBs with 200 amps bus bar, 4 way, for MCBs with din channel, Earth bar and neutral bar etc. complete all as specified and directed . ( Make Legrand cat No 6077 10 or equivalent equiv in Schneider /L&T)

Supply and fix MCB TPN 240V, 63 Amps capacity complete all as specified and directed.( Make : Legrand cat No 4086 83 or equivalent in Schneider/L&T)

Supply and fix MCB SPN 240V, 32-63 Amps capacity complete all as specified and directed. (Make : Legrand cat No 4086 17-20 or equivalent in Schneider/L&T )

Supply and fix MCB SP 240V, 6-32 Amps capacity Complete all as specified and directed. (Make : Legrand cat No 4085 87-95 or equivalent in Schneider/L&T )

S & F Exhaust fan 300 mm sweep, with bird screen incl connecting up with provision of cable 0.5 sqmm twin core PVC insulated from ceiling rose/connector to fan of including fixing the fan frame to wall opening with suitable size rag bolts after drilling, making hole to wall as per size and making good complete all as specified and as directed. Make - Orient Model - Air flow or equivalent in Havells / Khaitan/Crompton

S&F for batten LED tube light with LED tube light 1x18W LED complete connection from ceiling rose to fitting terminal with three core flexible cable and taking down old unsv one complete all as specified and as directed. ( Make Havells Cat No STOUTPLUS600BS20WLED840SPCWH HSN code no-9405 or equivalent in Philips/Crompton/Bajaj)

S&F for suspended architectural LED 20W luminariesprovides soft light glare free symmetrical allumination with continuous mounting end cap complete connection from ceiling rose to fitting terminal with three core flexible cable and taking down old unsv one complete all as specified and as directed .( Make Havells Cat No CONSTA544LP20WLED830SPCWH HSN code no-9405 or equivalent in Philips/Crompton/Bajaj)

UNIVERSAL TRADING

BHARAT TRADING CORPORATION

M/s Santosh Industrial Corporation