Dhani Silanwali Upgradation of boosting station providing and laying of rising main distribution pipe line and providing FHTC in village Dhani Silanwali and upgradation of water works Devsar under JJM category II

Amount

Up-gradation of water works Supply & Erection of Horizontal spindle split casing type pumping sets of minimum four star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. (A) Raw water pump set (At W/W ) 600 LPM, 12 mtrs head 7.50 BHP

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 600 mm deep having following accessories:- for clear water pump set 600LPM 12 mtr Head. a) Main switch 63 Amp. 2 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 600 LPM x 12 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set j) change over switch 63 amp 1No.

Supply and fixing following CI D/F pipe and sluice valves /non return valves/ Reflex valves including cost of Jointing materials, laying, jointing, refilling including making adequate support of masonry/ concrete for delivery and suction pipe from bell mouth in the collecting tank up-to the rising main laid by the deptt. as per plan shown from the fundation well of pump chamber for all rew water and clear water pumping set at w/w in position as per specification given in schedule No.II B) CI D/F pipes 200mm i/d

B) CI D/F pipes 150mm i/d

Supply erection testing of ISI marked copper wire for 1 Nos motors with under ground system in PVC and flexible pipes copper wire size 6 mm complete in all respects with accessories like thimble etc.

Providing and fixing of complete floating arm and floating drum fabricate of GI sheet of 16 guage with M.S. bolts made of M.S. flat and C.I. flange welded on it with coller one side and other side wire mash welded to prevent foreign elements to enter in floating arm fixed with CI swall bend with C.I. base plate fixed with anchor bolts in water tank haudi 8" i/d Floating arm complete in all respect as per specification of Engineer-In-Charge

Supply erection, testing of light fittings including wire in the Pump Chamber with material upto 10 points including switch , button , plug, PVC conduict pipe & copper wire etc. as per approved specifications.

Providing & fixing celling fan 1400 mm 56" with speed adjuster make (make crompton, usha, Bajaj) complete in respect.

Up-gradation of boosting station Supply & Erection of Horizontal spindle split casing type pumping sets of minimum four star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. (A) Clear water pump set (At boosting station ) 800 LPM, 40 mtrs head 10 BHP

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 600 mm deep having following accessories:- for clear water pumpset 800LPM 40 mtr Head. a) Main switch 63 Amp. 2 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 2 No. for 800 LPM x 40 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set j) change over switch 63 amp 1No.

Supply and fixing following CI D/F pipe and sluice valves /non return valves/Reflex valves including cost of Jointing materials, laying, jointing, refilling including making adequate support of masonry/ concrete for delivery and suction pipe from bell mouth in the collecting tank up-to the rising main laid by the deptt. as per plan shown from the foundation well of pump chamber for all rew water and clear water pumping set at w/w in position as per specification given in schedule No.II B) CI D/F pipes 200mm i/d

B) CI D/F pipes 150mm i/d

Supply erection testing of ISI marked copper wire for 1 Nos motors with under ground system in PVC and flexible pipes copper wire size 6 mm complete in all respects with accessories like thimble etc.

Supply erection, testing of light fittings including wire in the Pump Chamber with material upto 10 points including switch , button , plug, PVC conduict pipe & copper wire etc. as per approved specifications.

Providing & fixing celling fan 1400 mm 56" with speed adjuster make (make crompton, usha, Bajaj) complete in respect.

Providing and fixing of 15 mm GI nipple nominal bore complete in all respect and the entire satisfaction of Engineer-in-Charge (make Jindle/ Parkesh/Tata) complete in all respect

Providing and fixing of ½" mm GI elbow complete in all respect and the entire satisfaction of Engineer-in-Charge (make Jindle/ Parkesh/Tata) complete in all respect

Providing and fixing of ½" mm GI socket complete in all respect and the entire satisfaction of Engineer-in-Charge (make Jindle/ Parkesh/Tata) complete in all respect

Bidder Name

Amount

BALJIT SINGH CONTT(GSTN-NA)

The Siwani Sadhbhawna Co op LC Society Ltd(GSTN-NA)

BALJIT SINGH CONTT

BALJIT SINGH CONTT