Repair and Protection of Bridge (Khanua River Bridge) (2x15m) at Km-4 of Ratasia Rampur Bujurg Road At Deoria

Construction of sub grade with Materials Obtained from Borrow pit (Carted Earth)- Construction of embankment with approved materials obtained from borrow pits a lift upto 1.5 m transporting to site spreading, grading to required slope and compacting to meet requirment of Table 300.1 and 300.2 with a lead upto 1000 meter as per specification Clause 301.5 and earthen shoulder with approved material obtained from borrow pits (carted earth) with all lift & lead, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-1.5(4).

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m as directed by Engineer-in- Charge: 2.1.1. All kinds of soil 0.30 m & Above

Laying of geotextile Filter 280 GSM between Pitching and embankment slopes on which pitching is laid to prevent escape of embankment material through the voids of the stone Pitching / cement concrete block as well as to allow free movement of water without creating any uplift head on the pitching.

Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specification clause 1302.

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1 no tragment weighing not less than 25 kg laid dry complete as per drawing and technical specification clause 1301.00

Dismantling, Removal of existing damage expansion joint and Installation of New strip seal joint complete machine, materials and manpower

Sealing of cracks / porous concrete by injection process through nipples / growting complete As per technical specification

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm complete as per approved drawing and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacture's instructions for installation..

Mild steel or iron work in heavy sizes such as trusses, builts up gates, door frames, records racks roof work, gates etc. wrought to required form including drilling holes, rivetting or welding where necessary and also including supply of steel, bolts, nuts and wastages etc. and their fixing required for completion of the work.

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (two coats applied @ 0.83 ltr/10 sqm) over existing cement paint surface (apex Ultima, weather coat All guard) asian berger (14.67.2)

Please Enable Macros to View BoQ information