PROVN OF OVERHEAD COVERED SHED FOR SWIMMING POOL AT 2003 STN UNDER GE (AF) GURGAON

Excavation in trenches n.exc 1.50mtr wide and 1.50mtr in depth for foundation etc or for shafts, wells cessipts, manhole etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr deth and getting out in soft /loose soil etc complete all as specified and as directed

M&L for cement concrete 1:4:8 type B-2 (using 40mm graded aggregates) as in foundation and mass concrete etc complete all as specified and directed

M&L for reinforced cement concrete nominal mix typr B1 ( 1:2:4) ( 20 mm grade aggregater )Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for reinforced cement concrete nominal mix typr B1 ( 1:2:4) ( 20 mm grade aggregater ) for Columns, pillars, piers, posts and struts all as specified and directed

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter all as specified.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions all as specified

M&L for Returning, filling in, including spreading, levelling, watering and well ramming soft/hard dense soil in layers not exc 25 cm. all as specified and directed

Removing excavated soil/ building material/debries to a distance exc 250 mtr but not exceeding 500 mtr and depositing where directed etc complete all as specified and directed

Excavation in post holes (or similar holes) in hard /dense soil each n exe 0.5 cu.m, gettting out, returning, filling in and ramming earth or broken rubble mixed with earth around , in layers not exeeding 25cm, watering, and removing surplus soil to a distance n exe 50 m and making good surface complete all as specified and as directed.

M&L for providing cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregates) as in foundation filling and mass concrete , post holes, cills, steps; seismic and other similar bands, plinth courses, string courses, ramp, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , on roofs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, etc including necessary formwork complete all as specified and directed by Engineer-in-Charge.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

S&F Rolled sections as in main and cross beams, hip and jack rafters, purlins, truss members, column, where connected to common rafters and running rails and guides for angle cleats or other connecting plates etc. and asin drain covers complete conforming to Fe-410-W(Gde E-250) quality B complete all as specified and directed

S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and directed

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

Mild steel bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

S&F MS Machine made screw bolts with hexagonal or square head at one end and screwed the other each screwed end to be fitted with washers and one hexagonal nut exc 16 and not exc 20 cm long

S&F for Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified.

M&L for Preparing new steel or iron surfaces of any description over 10 cm width or girth as directed

M&L for red oxide primer over steel or iron surfaces as directed

M&L for applying two coats of synthetic enamel paint over steel or iron surfaces as directed

M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris from the premises all as specified and directed

M&L for 75 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) all as specified and directed

M&L for PVC grating of width 25-35 cm over swimming pool drain all as specified and directed

S&F swimming pool diving board ( a linear flex spring of cantilever type) of thickness 40-50 mm, length 3.0 m having width 30 to 40 cm of fibreglass material all as speciifed and directed

Demolition of reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed

Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles all as specified and dierected

M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed

M&L for Providing precast cement concrete Type C0 1:3:6(12.5 mm graded aggregate) louvres and jallies, 25mm thick set in CM 1:6 (measured solid),including all mould- ings but excluding frame completet all as specified and directed

M&L Rendering 15 mm thick cement plaster on fair faces of stone masonry or brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed (Note : edge/face of the chajjas, where damaged, shall be repaired and is included in this item.)

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint over new/old surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed

Please Enable Macros to View BoQ information