08/EEC/BSNL/CD/BGL/20252026

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).

18 mm thick

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :

2nd class teak wood

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Twin rubber stopper

Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge

Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete :

New work (two or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge.

With cement mortar 1:4 (1 cement : 4 fine sand).

Polishing of Terrazo tiles flooring using polishing machine including washing with oxalicic acid wash, all complete as per the directions of Engineer -in-Charge.

Dismantling aluminium partitions, doors, windows, fixed glazing board etc including disposal of unserviceable material and staking the same carefully with in the premises at all levels etc. complete as per the directions of the Engineer-in-charge.

Providing and fixing wooden flooring of Armstrong make or rate and quality equivalent as approved by Engineer in charge.ambience plus premium wooden laminate flooring 8mm thick of shade Heart wood walnut (L3055) of approved shade/colour and design/pattern of plank size 1200x128x8mm having lock and fold system for locking arrangement with an under layer made of natural colour foam 2mm thick complete as per the directions of Engineer in charge.Note1. Wooden flooring top shall be with fine surface.core material of the plank shall be high density fiber (HDF) as per manufacturers specification. Note: Cost includes cleaning of the existing floor surface on which the wooden flooring being laid properly mopping the floor with required floor cleaning agents soaps to achieve a surface which is smooth, flat,hard,free from dust,moisture,greases etc is obtained.Entire wooden flooring work shall be undertaken as per manufacturers instructions.

Providing and fixing ARMSTRONG make or rate and quality equivalent skirting 12mm thick 75mm height wooden mouldings of standard size of shade for skirting complete as per directions of Engineer in charge.

providing and fixing 24mm thick block board conforming to IS 1659 BWP grade termite reistant ,ecofriendly and confirming to E1 standards of emissions cut to required sizes and fixing in position with necessary screws and adhesives over the MS framework complete as per directions of Engineer in charge.

Providing and fixing of Fabric Acoustical Wall Paneling with square edges made of fiber glass substrate 20mm thick and wrapped on the front side with an acoustically transparent and fire-resistant fabric of required colour and size (2400x600, 1800x600, 600x1200 or 600x600 mm ) of providing a minimum sound absorption level of 0.90 NRC to be affixed to wall using impaling clips . impaling clips of adequate quantity as specified by the manufacturer shall be fixed to the wall surface using self-tapping screws. Silica based construction adhesive shall be dabbed on to the projecting elements (spikes) of the hooks. Fabric wall panels shall be pierced through the spikes of the hooks ensuring the line and level of the panels are maintained etc complete as directed by the Engineer in charge.

Providing and fixing Wood Perforated Panels(Decibel Ceiling or equivalent) of width 600 mm, thickness of 16mm or as required, made of a High density Moisture Resistant fiber board to substrate with laminated facing as per the approved shade / species and finish and a melamine balancing layer over the reverse side. The board should have a special perforated pattern where the visible surface has a ("Helmholtz" fluted perforation of 2mm width and 28mm visible panel) each. Tolerance(+- 1mm).The sound level will be below 30db. The wall paneling are installed by fixing the wooden battens/Gl Section of section 50X50mm as approved by the Engineer in charge on the solid wall horizontally using screws and plugs at 600mm centre-to-centre. The aluminum extruded section fixed over the lowest second wooden batten at 600mm centre to centre with

necessary screws. The first set of wooden panels are installed by inserting the clips for border and groove of panel inserted into projecting the flange of aluminum clip. All boards installed up to the required by height by inserting the tongue into the groove of earlier inserted panel. Rockwool 50 mm of 48 Kg/m3 is filled on the back of wooden panels. Etc complete as directed by the Engineer in charge.

Providing and fixing soft fiber acoustical suspended ceiling system ( Decibel Dune Tile or equivalent ) dune tiles made up of compressed glass fibre of size 600x 600mm of thickness 17mm. with grid . The tiles shall have humidity resistance (RH) 99% light reflectance >_ 85%. Thermal conductivity k= 0.052- 0.057 w/m k, Fire performance as per (BS 476 Part / 6&7). The tile shall be laid on hot dipped galvanized steel and pre painted galvanized steel of Main-T of size 38x15x0.30mm at every 600 c/c and cross T of size 28x15x0.30mm are fixed to Main T at 600 mm c/c. Wall angle of size 24x24x0.40mm then fixed along the perimeter of wall with the suitable fasteners. The suspension is done with all accessories like Soffit cleat, levelling clips & wire rods as per drawings and fixing of (Decibel Ceiling or equivalent) Decibel Dune tiles on grid

system using 600MM X 600MM X 17MM including providing necessary openings for light fixtures, diffusers etc. are to be made as per lay out plan. ( Note: The rate includes all accessories, material & labor complete as directed by Engineer in charge.)

Supplying and installation of Godrej Make Single seater Workstation, Model: Godrej WISH Hybrid system, Size: 1050mm X 600mm x 900 mm H., Main Frame 52.4mm powder coated aluminium trims TopTIle -1no. White Board per person, rest Fabric Magnetic ,Middle panels - Fabric , Bottom Tile - metal, Wire management - - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Worksurface - 25mm thk. Prelam particle board with flat pvc lipping edge banding of size 1050 mm w x 600 mm d. Under Structure-MS powder coated legs, all complete as per the manufacturer's specification and directions of Engineer-in-charge. The following accessories shall be provided for each seat in work station : a)Metal key board tray b)Metal CPU trolley c)3-draw mobile

metal pedestal of size 390mmx435mmx646mm model : Godrej Nova pedestal with castors or approved equivalent, complete all as per the directions of the Engineer-in-charge. Note : The quoted rate shall be for one unit of complete single seater work station system all complete as per the manufacturer's specification and direction of Engineer-in-charge.

Supplying and installing executive chair with gas lift and tilt lock with fixed arms of Godrej (Model BRAVO mid back chair NO.FU9u02R) or Feather llite or equivalent approved by the Engineer in charge of required colour complete as per manufacturers speciications and directions of Engineer in charge

Providing and fixing M/s Marvel or equivalent make as approved by Engineer in charge, vertical blinds of approved shade, with 100mm/127mm slat width, fabric manufactured from woven polyester. The slats shallbe easily detached from the slat traveller and easily unclipped to traverse across the track. Fabric shall be treated with TEFLON fabric protector. The track shall be the EOS tracking system using extruded aluminium alloy section of approved size. Bottom slats shall have earless weights without chains. The vertical blinds shall contain EOS worm gear clutch mechanism all complete as per directions of Engineer-in-charge.