REPAIR MAINTANANCE OF INTERNAL WIRING INCLUDING FITTING AND FIXTURE CEILING EXHAUST AIR CIRCULATOR WALL FANS GEYSERS MCB DBs LED LIGHTS AND OTHER CONNECTED WORKS FOR SOUTH SIDE OF RUNWAY UNDER AGE EMI OF GE NW VASCO

Taking down carefully any type of copper/ aluminium point wiring (light, fan, socket or power) complete including conduits/casing caping with fittings such as switches, ceiling roses, pendents, regulators, bells, sockets, tube light fittings etc, removing the materials/debris and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed.

M & L for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LS conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LS as continuous earth wire drawn in and including PVC Casing & Caping double lock/ conduit pipe type of as required width (not less than 20 mm in width) ISI marked medium grade white colour with all accessories of same grade fixed on wall /ceiling including terminated in to Cast iron / pressed steel terminal box 60mm deep of required size made out of 2 mm thick MS sheet duly painted both sides with 3 mm thick plastic laminated sheet top cover fixed with brass screw & cup washers and including provision of modular metal flush box, modular cover plate with frame top cover for mounting switches, fan regulators etc for one light point controlled by one 5 Amp switch one way complete all as specified and as directed.

All as per item No. 02 here in before, but for one fan/exhaust fan point controlled by one 5 Amp all as specified and as directed.

All as per item No. 02 here in before,but for one bell/buzzer point controlled by one bell push 5 Amp all as specified and as directed.

All as per item No. 02 here in before, but for one light point controlled by two 2-way switches all as specified and as directed.

All as per item No. 02 here in before, but for one 3/5 Pin, 5 Amp Switch socket out let on the independent board complete all as specified and as directed

All as per item No 02 above, but with 2.5 sqmm for One 3 pin 16 amps socket outlet point controlled by one 16 amps switch on the Independent board complete all as specified and as directed.

Taking down unserviceable any type of copper/ aluminium sub main wiring of any type/ size/ core / type complete including conduits/casing caping etc, removing the materials/debris and making good the disturbed surfaces of walls, floors and ceilings etc to match with the original existing finish complete all as specified and as directed.

M & L for sub main wiring with two runs of single core 2.5 Sqm, FRLS Copper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including non- metallic rigid PVC casing caping (double interlock type) of suitable width medium duty with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 2.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as directed. (Note :- Two runs of cable, one run of earth continuity conductor and one run of PVC casing caping/conduit shall be measred as one unit)

All as per item No 9 here in before, but two run of single core 4 sqmm and one run of 4 sqmm cables as earth continuity conductor all as directed.

All as per item No 9 here in before, but two run of single core 6 sqmm and one run of 6 sqmm cables as earth continuity conductor all as directed.

All as per item No 9 here in before, but four run of single core 10 sqmm and two runs of 10 sqmm cables as earth continuity conductor all as directed.

S & F in repairs Switch Piano flush button single pole one way 5 A , 240 V complete all as specified and as directed

S & F in repairs modular Switch single pole one way 6 A, 240 V complete all as specified and as directed

S & F in repairs modular Switch single pole one way 16 A, 240 V complete all as specified and as directed

S & F in repairs Bell push flush button, single pole, one way, 240 V, 5 A complete all as specified and as directed

S & F in repairs Modular Bell push single pole, one way, 240 V, 6 A complete all as specified and as directed

S & F in repairs Switch Socket combination 2 in 1, 5 Amp flush type, 240 V, complete all as specified and as directed

S & F in repairs Modular Socket outlet 2 in 1, 6 Amp, 240 volts, complete all as specified and as directed

S & F in repairs Switch Socket Combination 5A/16A, 5 in 1, 3 pin, 240 volts complete all as specified and as directed

S & F in repairs Modular Socket outlet 5A/16A, 5 in 1, 3 pin, flush type universal, 240 volts complete all as specified and as directed

S & F in repairs Ceiling rose, surface bakelite, 65 x 50 mm two/ three terminals 240 volts complete all as specified and as directed

S & F in repairs call bell ding dong AC, 230 volts, single pole all as directed

S&F in repairs stepped type electronic fan regulator flush type as per exisitng model on the existing board all as directed.

S&F in repairs stepped Modular electronic fan regulator on the existing board all as directed.

S & F in repairs modular flush metal box with inner & outer sheet fixed in 60 mm deep of suitable size for 1/2 module fixed with screw for mounting modular switches, Sockets, fan regulators etc for existing elect arrangements and connected to the existing elect wires, making good the disturbed area with cement work and paints as same existing background all as directed. Note : New modular switches, sockets & fan regulators will be measured and paid separely

All as per item No. 26 here in before, but Size of the box suitable for 3 module

All as per item No. 26 here in before, but Size of the box suitable for 4 module

All as per item No. 26 here in before, but Size of the box suitable for 6 module

All as per item No. 26 here in before, but Size of the box suitable for 8 module

All as per item No. 26 here in before, but Size of the box suitable for 12 module

S & F in repairs White inner, outer cover plate Modular type with frame, 2 module

Diito all as per item No 32 here in before but 3 module

Diito all as per item No 32 here in before but 4 module

Diito all as per item No 32 here in before but 6 module

Diito all as per item No 32 here in before but 8 module

Diito all as per item No 32 here in before but 12 module

S & F in repairs PVC Casing & Caping double lock type of as required width (not less than 20/25 mm in width) ISI marked medium grade white colour with all accessories of same grade fixed on wall/ceiling etc. complete all as specified and as directed.

Taking down unserviceable any type of Main Switch, DB's including MCBs incl wooden / GI/ MS sheet board etc and removing from site and making good the disturbed surface of wall etc all as specified and as directed.

S&F in repairs sheet metal enclosure SPN with a two pin and earth plug and socket complete with one SP MCB 20 Amps complete all as specified.

S&F in repairs MCB DB SPN 8 way DB 230 V with 200 A rated bus bar double door type complete all as specified and as directed.

All as per item No 41 here in before but MCB DB TPN 4 way DB 415 V with 200 A rated busbar.

All as per item No 41 here in before but MCB DB SPN 4 way DB 230 V with 200 A rated busbar.

All as per item No 41 here in before but MCB DB SPN 12 way DB 230 V with 200 A rated busbar.

S & F in repairs MCCB DB TPN, 4 way, (MCCB + 12 way O/G) double door, IP-54, vertical type including provision for mounting one MCCB of 100 amps breaking capacity 25 KA, 4 pole without MCCB complete all as specified and as directed.

Supply and fix in repairs MCCB of 100 to 125 A breaking capacity 18/25 KA , 4 pole thermal megnetic release, compact type suitable for MCCB DB Vertical type as incoming in the existing DB's complete all as specified and as directed

S & F in repairs MCB TPN 40 to 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified.

S & F in repairs MCB TPN 32 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified.

S & F in repairs MCB TP 40 to 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified.

S & F in repairs MCB TP 32 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified.

S & F in repairs MCB SPN 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified.

S & F in repairs MCB SP 40 to 63 amps 415 volts C curve, 50 HZ AC 10 KA complete all as specified.

S & F in repairs MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified.

S & F in repairs wall mounting Plug and socket DBs TPN 32 Amp Complete all as specified.

S & F Energy efficient surface Mounted LED Luminire 20 watts 4' long, with acrylic cover aluminium exeruded body complete all as specified and directed by Engr-in-Charge.

S & F surface Mounted INVERTER LED Luminire 20 watts 4' long, 4 hours backup with provision of connecting wire complete bodyall as specified and directed by Engr-in-Charge.

Supply and fixing LED light fitting 1x18 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

M & L for Point wiring with 1.5 sqmm (nominal area ) PVC insulated and unsheathed single core FRLS copper cable 1100 volts grade with stranded copper conductor in and incl stove enamelled steel concealed conduit (medium grade) and conduit accessories along with continuous earth wire 1.5 sqmm PVC insulated and unsheathed single core FRLS cable 1100 volts grade stranded copper conductor and connected to common earth dully, with 1.6 mm thick cadmium plated sunk MS pressed steel terminal box for one flame proof light/fan point controlled by one flame proof switch, including taking down of existing wiring complete all as specified and directed.

M & L for Point wiring with 2.5 sqmm (nominal area ) PVC insulated and unsheathed single core FRLS copper cable 1100 volts grade with stranded copper conductor in and incl stove enamelled steel concealed conduit (medium grade) and conduit accessories along with continuous earth wire 2.5 sqmm PVC insulated and unsheathed single core FRLS cable 1100 volts grade stranded copper conductor and connected to common earth dully, with 1.6 mm thick cadmium plated sunk MS pressed steel terminal box for one flame proof light point controlled by one flame proof switch, including taking down of existing wiring complete all as specified and directed.

S & F in repairs Energy efficient surface Mounted LED Luminire 10 watts 2' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.5 mtr all as directed.

S & F in repairs wall Mounted E-27 Holder complete with all accessories incl necessary two core copper wire for connection to connector all as directed. Make : - Lukar CAT NO-LWL31-2 or eqivalent approved

S & F in repairs Hanging light E-27 Holder complete with all accessories incl necessary two core copper wire for connection to connector all as directed. Make : - Luka (CAT NO-LHL403E3 or eqivalent approved

S & F in repairs Energy efficient wall Mounted LED Luminire 2 watts X4 complete with all accessories incl necessary two core copper wire for connection to connector all as directed. Make : - Lukar CAT NO-HALO W33 or equivalent approved

S & F in repairs recess/surface mounting high lumen LED flat panel 1'x1' 18 Watt, white powder coated CRCA housing with highpower LEDs, aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver, LED strip, connector block etc. and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed.

S & F in repairs recess/surface mounting high lumen LED flat panel 2' x 2' 36 Watt, warm white or white light with white powder coated CRCA housing with highpower LEDs, aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver, LED strip,connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed.

Taking down old unservicable CFL bulb and Supply and fix retrofit LED bulb 12/15W 240volts, 50Hz, including removing old unserviceable item complete all as specified and directed.

S&F in repairs LED light fitting 1x18 watts Surface/recess mounted LED downlighter circular or square shape in powder coated white finish with integrated electronic driver complete all as directed.

M & L for wiring of circuit/ sub main wiring with two runs of single core 1.5 Sqm, FRLS Copper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including steel conduit of suitable dia medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall/iron or concealed inside wall structure along with one run of 1.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as directed. (Note :- Two runs of cable, one run of earth continuity conductor and one run of steel conduit 25 mm dia shall be measred as one unit)

Supply and fix in repairs LED COB light 6/9W 240volts, 50Hz, including removing old unserviceable item complete all as specified and directed.

Supply and fix in repairs E-27 LED bulb 4 W, 240volts,50Hz, including removing old unserviceable item complete all as specified and directed.

M & L for Earthing complete with copper earth plate electrode 600 x 600 x 3.15 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to copper strip size 20 x 3 mm thick by mean of nuts/bolts, check nuts and washers of brass as shown in electrical plate No. 5 of SSR part-I including necessary excavation and earth work, GI Pipe 15 mm bore light grade for watering with Funnel, wire mesh and protection to earthing strip shall be provided with GI pipe light grade 32 mm dia up to 7.5 mtr from the earth plate electrode and refilling of soil including adequate quantity of charcoal dust and common salt etc & earth work in any strata, PCC pit chamber in cement mortar 1:3:6 type C-2 with 40 mm thick Precast RCC cover slab 1:2:4 type B with 8 mm dia TMT bar and handle with lifting hooks including testing any type complete all as specified and as directed.

M & L for Earthing complete with Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised earth wire 4 mm dia by mean of nuts/bolts, check nuts and washers of brass as shown in electrical plate No. 5 of SSR part-I including necessary excavation and earth work, GI Pipe 15 mm bore light grade for watering with Funnel, wire mesh and protection to earth lead shall be provided with GI pipe light grade 20 mm dia up to 7.5 mtr from the earth plate electrode and refilling of soil including adequate quantity of charcoal dust and common salt etc & earth work in any strata, PCC pit chamber in cement mortar 1:3:6 type C-2 with 40 mm thick Precast RCC cover slab 1:2:4 type B with 8 mm dia TMT bar and handle with lifting hooks including testing any type complete all as specified and as directed.

S & F in repairs Switch Flameproof WP Rotary type with termination box in LM6,15A single pole 250V

S & F in repairs Flameproof Switch socket combination with termination box in LM6,16A single pole 250V

S & F in repairs Integral decorative LED bollard with opal acrylic with IP-65 protection of 9 watts capacity all as directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate including use and waste of form work for pole coping all as dirceted.

S&F in repairs integral LED aviation light comprising of aluminium housing with polycarbonate enclosure with necessary fixing arrangement such as GI pipe, fixing clamp, brackets, etc., complete all as specified.

S & F in repairs 1 x 60 watts LED building security light made up of cast aluminium housing with toughned glass and individual LEDs with secondary optics,>100 lm/W and IP66 protection for building security lights all as specified.

Supply and fix in replacement of 90 Watt LED street light with pressure die cast aluminium housing & toughened glass with IP-66 degree protection, individual LED's must have peanut lenses for better throw across & along the road with luminarie efficacy of greater than 100 lumen/Watt. The luminarie should have 5 KV surge protection, PF > 0.95, and total harmonic distortion of THD < 10%, voltage range of 140-280V should be provided. The manufactures LOGO must be embossed/Engraved in the housing of the luminarie complete all as specified and directed by Engineer-in-Charge.

M & L for Street light bracket made out of GI tubing 32/40 mm dia, light grade bend to shape suitable for below mentioned security light fitting with necessary MS clamps with one coat of red oxide and two coats of aluminium paint including nut, bolt, washers etc.

S&F in repairs LED High bay luminaires 1 x 150 watts Energy saving, environment friendly & robust open type vertical Highbay LED luminaire with high power COB LED as light source all as specified and as directed.

Supply and fix in repairs LED flood light fitting 200 watts made in pressure die cast aluminium housing and reflector and enclosed with toughened glass with IP66 protection complete with all accessories such as LED's and electronic driver, internally prewired including necessary fixing arrangement on PCC pole by providing MS angle iron bracket 50x50x6mm of adequate length as per site requirement with MS flat iron clamp 32x6 mm with necessary nuts, bolts and washers etc and making cable connection all as specified and directed.

Taking down carefully ceiling fans of size 1200/1400 mm sweep at any height of any sweep/ make/ model after disconnecting electric connection and dismantling and opening the body of ceiling fan and examine for repairs including servicing, overhauling, greasing etc and cleaning the complete body both internal & external parts with cleaning agent and renewal of minor spare parts such as split pins,cater pins,coupling bolt, capacitor holder, terminal adoptor, screws, nuts, spring washers for blade/ body etc and replacement of components/ accessories such as ball bearings, gun metal bushes, capacitor, canopy top & bottom, shackle clip assembly and assembling of all parts including hanging and fixing back in existing location and connecting of electrical connections and testing for its satisfactory performance complete all as specified and directed. Note :- (i) Spare parts will be measured and paid separately under relevant item of schedule as supply only

All as per item No. 87 above,but exhaust fan of size upto 300 mm sweep all as directed.

All as per item No. 87 above,but exhaust fan of metal body size above 380 mm and upto 450 mm sweep all as directed.

All as per item No. 87 above, but Air circulator wall mounted type 450 mm to 600 mm sweep including carrying out repairs to oscillation mechanism / speed regulation mechanism and making functional for satisfactory performance.

All as per item No. 87 above, but for wall fan/ pedestal fan 400 mm sweep including carrying out repairs to oscillation mechanism/ speed regulation mechanism and making functional for satisfactory performance.

Material and labour for painting to ceiling fan of size 1200 mm sweep to 1400 mm sweep complete body, blades & down rod etc of any sweep/make/model with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation surfaces including marking of MES Number with black paint complete all as specified and directed directed. Note :- Painting work to be carried out after dismantling of ceiling fan

All as per item No. 92 above,but exhaust fan of metal body size above 300 mm to 450 mm sweep all as directed.

All as per item No. 92 above,but Air circulator wall mounted type 450 mm to 600 mm sweep all as directed.

M & L for rewinding of ceiling fan motor of size 1200 mm sweep to 1400 mm sweep of any make/model/type with new supper enamelled copper winding wire of similar gauge and number of turns as existing,including cleaning the motor properly and applying varnishing heating and assembling of fan motor and rotor fixing back after testing including removing burnt out copper winding wire from ceiling fan motor complete all as specified and directed.

All as per item No 95 here in before but of exhaust fan of size upto 300 mm and 380 mm sweep all as directed.

All as per item No 95 here in before but of exhaust fan of size above 380 mm and upto 450 mm sweep all as directed.

All as per item No 95 here in before but of Air circulator wall mounted type 450 mm to 600 mm sweep all as directed.

S & F in repairs capacitor of 2.5/3.15/4.0 mfd capacity for ceiling fan of any sweep all as specified.

Supply only shackle clip assembly with rubber bush reel and nuts,bolts and washers suitable for ceiling fan of any sweep/type.

Supply only ball bearing suitable for ceiling fan/exhaust fan/air circulator/pedestal fan any type all as directed.

Supply only split pin as per sample suitable for ceiling fan all as directed.

Supply only MS nut bolt with split pin as per sample and as directed by Engr-in-charge

Supply only plastic conopy top and bottom with tighten screw suitable for ceiling fan of any sweep/type.

Supply and fix down rod made of MS pipe medium grade 15mm dia of 300/600mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to of down rod with two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

supply and fix Rigid non-metallic PVC conduit of size 25mm, inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as directed

Supply and Fix in repair Ceiling Fan motor with body complete suitable 1200 mm Sweep matching to blade of existing ceiling fan all as specified and as directed.

Supply and fix in repair PCB for BLDC fan of size 1200 mm complete, taking out fan, dismantling the parts properly to replace the burnt out PCB and reassembling the fan and fixing at same location all as directed.

Supply and Fix in repair Fan Blade set of three suitable of any make and sweep up to 1200 mm sweep matching to existing ceiling fan all as specified and as directed. Note:- Fan Blade make and size should be supply with the mach of under relivent item of Sch A.

Supply and fix copper conductor cable, PVC insulated, sheathed, flexible, multistranded,ISI marked, 1100 volts grade 3 core ;0.75 sqmm and including electric connection to ceiling fan and ceiling rose complete all as specified and directed.

Removing old unserviceable blade assembly from exhaust fan and supply and fix exhaust fan blade assembly suitable of size 300 mm to 450 mm sweep and including locking nuts and testing complete all as specified and directed.

Supply and fix in repairs new metal blade assy complete for air circulator of size 450 to 600 mm of existing make and type all as directed.

All as per item No.113 above, but of capacity 50 litre

S & F in repairs heating element threaded/push type of triangle base/round base type 1.5/2 KW for geysers

Supply only geyser indicator pilot lamps(red and green lamps) with wiring round/square/rectangle suitable for geysers of any type

Supply and fix PVC connection pipe15 mm dia 450/600mm long with end nuts and washer, suitable for hot water and cold water outlet/inlet of geyser inlcuding removing old unserviceable item complete all as specified and directed.

Supply and fix stop valve 15 mm dia, cast copper alloy chromium plated with crutch handle screwed both ends for GI pipe/fittings inlcuding removing old unserviceable item complete all as specified and directed

Supply and fix copper conductor cable, PVC insulated, sheathed, flexible, multistranded,ISI marked, 1100 volts grade, 3 core ;2.5 sqmm and including connection to geyser and plug outlet and inlcuding removing old unserviceable item complete all as specified and directed.

S & F in repairs thermostat BI-metal thermal relay suitable for geyser of any capacity all as directed.

Please Enable Macros to View BoQ information