SPECIAL REPAIR OF BUILDING NO P-14 OR MD ACCN AT URI LINES IN DAMANA MIL STN UNDER GE JAMMU

Demolition of brick work built in cement mortar incl all quoins arches pillars etc complete all as specified and as directed.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and complete removal of debris outside MD land complete all as specified and as directed.

M&L Plain cement concrete 1:2:4, type B0 (12.50mm graded aggregate) 25mm thick as in sub base for floor tiles complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for Reinforced cement concrete, type B1, 1:2:4 mix (20mm graded aggregate) as in slabs & Shelves etc complete all as specified and as directed.

Formwork to soffits of slabs including supports, overhangings etc, for fair finished surfaces of concrete complete all as specified and as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Dismantling floors hearth or wall tilling including cement mortor bedding (but not backing) removing unserviceable materials outside MOD area and rubbish off the premises. complete all as specified and as directed.

M & L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

M & L for treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

M&L for Providing water proofing treatment to Sunken floors all as given below :- (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty or epoxy mortar. (c) Cleaning the concrete surface by brushing & watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of Acrylic based polymer modified cementitious flexible compostie coating and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Appying a coat of Acrylic based polymer modified cementitious flexible compostie coating brush topping 1.5mm thick consisting of one part of Acrylic based polymer modified cementitious flexible compostie coating, two parts of cement and two parts of silica sand by weight and cured to 2 days. (e) Applying 15mm thick plaster in CM 1:4 mixed with WPC @100ml per 50 Kg cement on treated surface. (f) PCC 1:5:10 type E2 in sunken area.

M&L for Vitrified tiles any colour 8mm thick (square/rectangular) polished as in floor, area of each tile n.exc 0.36 sqm, set and jointed and laid with 3-4mm spacers set and jointed in neat Polymer modified tile adhesive of appropriate grade as per manufacturar instructions, 15mm thick screed bed in CM 1:6 & pattern, laying etc of tiles and Shade, Colour shall be decided complete all as specified and as directed.

All as per item 13 above but in vertical surfaces with 3-4mm spacers set and jointed in neat Polymer modified tile adhesive of appropriate grade as per manufacturar instructions , 15mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L for Non - skid coloured Ceramic tiles 6 to 7 mm thick (square/ rectangular) as in floor, area of each tile n.exc 0.18 sqm, set and jointed and laid with 3-4mm spacers set and jointed in neat Polymer modified tile adhesive of appropriate grade as per manufacturar instructions including, 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Coloured glazed ceramic tiles glossy finish of size 450x300x 5-6mm thick in dado’s/skirting etc. laid with 3-4mm spacers set and jointed in laid with 3-4mm spacers set and jointed in neat Polymer modified tile adhesive of appropriate grade as per manufacturar instructions to match, pattern, laying etc of tiles including 10 mm thick CM 1:4 plaster and Shade, Colour shall be complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc complete all as specified and as directed.

M&L Machine cut Kota stone slab flooring 18-20mm thick as in floor, splash stone for rain water pipes and to match the shade of the slab including 20 mm screed bed CM 1:6 including rubbing polishing complete all as specified and as directed.

S&F Machine cut Kota stone slab 18-20mm thick over 10 mm thick as in vertical surface over rendering in CM 1:4 laid and jointed with grey cement slury mixed with pigment to match the shade of the slab incluiding rubbing and polishing complete all as specified and as directed.

M&L 15mm-16mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and incl Screed bed or bedding layer of mortar 20mm thick in CM 1:4 complete all as specified and as directed.

Providing edge moulding to 15mm-16mm thick Granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) not exc 1.5 sqm each, including cutting holes for taking out holdfasts or dismantling brick work(holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt), & removing from site complete all as specified and as directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) exc 1.5 sqm and not exc 4 sqm each, including cutting holes for taking out holdfasts or dismantling brick work(holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt), & removing from site complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.

S&F Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 105x60mm incl bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and directed.

All as per Item above but size of frame 125X60mm for fixing of two shutters complete all as specified and directed.

M&L Cement concrete (1:3:6) type C0 using 12.5mm graded stone aggregate filling in pressed steel chowkats bed block for holdfast and the like complete all as specified and directed.

M&L Preparation of New Steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with particle board core and ply wood face panels, commercial type on both sides with lipping/frame to match complete all as specified and as directed.

S&F 35mm thick Factory made 2nd class hard wood, glazed and skelton shutter open rebated and prepared to receive glass, guage, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2009 Pt-I Section 8.24(b) supplied and fitted to chowkhats, complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and as directed.

M&L Preparation of New Wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer. complete all as specified and as directed.

S&F in repair powder coated aluminium three track sliding type glazed window, with frame of size 150x60x2mm thick and with sliding three track shutters of size 100x38x1.4mm thick. Two nos shutter are to be fitted with 5.0 mm thick plain sheet glass and one shutter with stainless steel wirecloth of 0.56 mm dia and 1.18 mm aperture. The window is also to be fitted with aluminium powder coated grill casted out of 5.50mm thick diamond shape section and with aperture not less than 75mm shall be fixed to frame. Incl all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing clips,rubber packing, Aluminium snap beeding etc complete all as specified and as directed.

M&L for framed work such as grills, gratings etc with end of bars shouldered or riveted or forged into spikes, framed guard bars confirming to Fe-290, Gde-E-165. complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45x70 mm (+5 mm) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with Butt hinges of required size with necessary full body threaded star headed counter sunk screws, complete all as specified and as directed.

S&F in repairs 18mm thick factory made 100% solid WPC flush shutter (for cupboard and vanity etc) made from co-extruded three layer rigid foam sheet (single extruded) with 0.8 to 1 mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 kg/cum manufacturer by an ISO 9001/2015 certified company complete all as specified and as directed.

S&F Modular Auto concealed soft closed hinges 35mm, any degree size fixed to cupboard complete all as specified and as directed.

S&F 100mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F Butt Hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100 mm long complete all as specified and as directed.

S&F Aluminum anodised bow handle fabricated type extruded section of 150mm long complete all as directed

S&F Aluminum anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F Mild steel helical door spring 300mm including roller and roller plate complete fixed with welding to existing steel chowkhats all as specified and directed.

S&F 150 mm over all length of cover plate of floor Door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor,complete all as specified and as directed by Engr-in-charge.

S&F Magnet catcher 50 mm size for kitchen cupboard shutter complete all as specified and directed.

S&F in repairs Curtain rod of stainless steel 20mm dia and side capes fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified as directed by Engineer-in-Charge

Dismantling PVC water tank/demolition of RCC water storage tanks of capacity exc 250 but n.exc 500 ltrs and removing from site.

S&F Rotational moulded polyethene water storage tanks 500 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I, including 20mm Ball Valves, 20mm Tank nipple, complete all as directed by Engr-in- Charge.

S&F in repairs 25mm outer dia CPVC gate valves all as directed by Engineer in charge.

S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) inlcuding taking down 15mm steel tubing complete all as specified.

S&F 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) inlcuding taking down 20mm steel tubing complete all as specified.

S&F in repairs Sinks with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete with CP waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs Kitchen stainless steel plate rack made out of 1.00mm thick sheet and having partions as per sample. The over all size (39"x30"x10") fixed with steel fastners or steel screw complete all as specified and as directed.

S&F in repairs Vitreous china Pedestal type water closet white, with 'P' or 'S' trap including soft closing seat cover, closed pattern with flat bottom,complete all as specified and as directed.

S&F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete.

S&F in repairs Vitreous China Wall hang Corner Wash Hand Basin, size 400 X 400 x 195mm including 32mm bore PTMT Waste coupling , waste pipe complete all as specified and as directed.

S&F in repairs 15mm bore Wall mixer non telephonic shower arrangement with connecting legs and wall flanges, cast copper alloy, chromium plated, complete all as specified and as directed.

S&F in repairs 15mm bore Wash Basin Mixer with 450mm Long Braided Hoses complete all as specified and as directed.

S&F in repairs Sink Mixer swan neck with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges complete all as specified and as directed.

S&F in repairs 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs Angle cock with wall flange, cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore all as directed by Engineer in charge.

S&F in reparis Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.0 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs Tubular towel rail 20mm dia D type 60cm long between flanges chromium plated all as specified and directed.

S&F in repairs Corner Glass Shelf 5.5 mm thick (300x300mm) chromium plated guard and railing(with Bracket) as per directed by Engr-in-charge.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls / floor etc complete.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls / floor etc complete.

Supply, Repair and Fixing of Single 110 mm PVC / SWR down take pipe fixing done with Pipe Supporting Clamping System consisting of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Mounted System for 110 mm (4") dia PVC / SWR pipe running vertically with wall distance 75 mm (3"). Pipe Support Clamping made of: 1. Profile Bracket Wall distance: 75 mm (3") Made of Low Carbon Hot Roll Gauge Corrected Oil Pickled & Drawn (HROP-D) Steel (IS 1079) Material size: 32 mm width × 3 mm thickness With ribs and notch Hot Dip Galvanized + Zn-Al Flake coated Salt Spray Test (ASTM B-117-2019): 2000 hrs SS304 Hex Flange Bolt with Serration 5/16" × 3/4" (A/F 13 mm) as per DIN 6921 SS304 Hex Flange Nut BSW 5/16 × 18 × 8 × 13 with Serration as per DIN 6923 2. Continuous Slotted "C" Channel Size: 250 mm (10") Made of Low Carbon Hot Roll Gauge Corrected Oil Pickled & Drawn (HROP-D) Steel (IS 1079) Hot Dip Galvanized + Zn-Al Flake coated Material thickness: 3 mm 3. U-Bolt Rubber Mounted Made of low carbon mild steel Rod diameter: approximately 7 mm Zn-Al Flake coated Salt Spray Test (ASTM B-117-2019): 1000 hrs Noise absorbing transparent ribbed silicon rubber sleeve Hex Flange Nut BSW 5/16 × 18 × 8 × 13 with Serration set as per DIN 6923 Zn-Al Flake coated Hot Dip Galvanizing As per IS 2629 (1985) Coating: 610 grams/m² (>85 microns) Material Grade IS 1079 MTC conforms to EN 10204 3.1 Material Quantity for One Unit Profile Bracket, wall distance 75 mm (3") – 2 Nos Continuous Slotted C Channel, size 250 mm (10") – 1 No U-Bolt R/M for 110 mm (4") PVC/SWR pipe dia – 1 No Fixing Nail, thickness 6.5 mm and length 63 mm (2½"), Zn coated – 4 Nos Fixing Details Pipe Support Clamping Unit to be fixed at every metre distance.

M&L in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete.

S&F in repairs PVC (SWR) Bends 110mm bore any radius with access door

S&F in repairs PVC (SWR) Bends 75 mm bore any radius with access door

S&F in repairs PVC (SWR) Tee 110mm bore any radius with access door

S&F in repairs PVC (SWR) Tee 75 mm bore any radius with access door

S&F in repairs PVC (SWR) vent cowl 110mm bore

S&F in repairs PVC (SWR) vent cowl 75mm bore

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MD land. (Including all necessary scaffolding lifiting arrangement up to 12 mtr height).

M&L Rendering 5mm thick on fair faces of concrete surface of ceiling in CM 1:3, surface finished even and smooth surface without using extra cement complete all as specified and as directed.

M&L for capillary rise treatment of walls, Base coat: Styrene-Butadiene Latex-based liquid for waterproofing, bond coating, and crack repair to enhance the properties of cementitious mixtures, offering increased strength, durability, and resistance to water, chemicals, and acids. Consumption base coat: 0.3 kg/m2 Second and Third coat: Latex of polymer-modified, slurry-based mortar designed for waterproofing concrete and masonry Consumption top coat: 3 kg/m2 System requirements: density: 2.00 kg/ltr; compressive strength: 0.5 N/mm2

M&L Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick in CM 1:4 in on fair faces of brick surface finished even and fair including water proofing compound all as specified. (Including all necessary scaffolding lifiting arrangement up to 12 mtr height).

Taking down cement plaster/disturbed RCC of column, chajja, parapets of roof, facia, drops etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4, (average thickness of PCC 25 mm) as required, brushing neat cement slurry with 3.0 kg of cement per sqm including necessary form work and scaffolding upto 3rd floor including fixing of wire netting below plaster and match the existing surfaces complete all as specified, necesaary T&P, form work and scaffolding is included in Quoted rates. (Including all necessary scaffolding lifiting arrangement up to 12 mtr height).

M&L Preparing of New plastered surface of ceiling and applying two coats of distemper oil bound over primer coat, complete all as specified and as directed by Engineer in charge.

M&L Complete removal of existing treatment and preparation of ceiling and applying two coats of distemper oil bound over primer coat, complete all as specified and as directed by Engineer in charge.

M&L Preparing of New plastered surface of wall and applying 1mm thick wall care putty and applying two coats of distemper oil bound over primer coat, complete all as specified and as directed by Engineer in charge.

M&L Complete removal of existing treatment and preparation of surface and applying 1mm thick wall care putty on old surface of walls and applying two coats of distemper Oil bound over primer coat, complete all as specified and as directed by Engineer in charge.

M&L Preparation of New Plastered surface and applying two coat of premium acrylic smooth exterior emulsion of approved colour with Silicon additive and Colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9ltr (undiluted)/ 10 sq mtrs diluted with water in 1:1 ratio and 1mm thick exterior grade wall putty as per manufacture's instruction and all coats incl primer to be applied with fully automatic airlessspray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed. (Including all necessary scaffolding lifiting arrangement up to 12 mtr height).

M&L Complete removal of existing treatment including fascias, cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and applying two coat of premium acrylic smooth exterior emulsion of approved colour with Silicon additive and Colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio and 1mm thick exterior grade wall putty as per manufacture's instruction and all coats incl primer to be applied with fully automatic airlessspray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed. (Including all necessary scaffolding lifiting arrangement up to 12 mtr height).

M&L Providing cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate ) in roof padding, roof kerbs or mud stops, rounded or chamfered on edges complete all as specied.

M&L Complete removal of existing roof treatment or roof tile, tarfelt, fungus, moss dust, plastr etc and removing from site to a place outside defence land as specified by civil authorities and clean the surface of roof with water and remove dust and M&L for highly elastic UV-resistant membrane one-component, water-based, liquid, and solvent-free coating for adhesion on various surfaces, including porous and non-porous substrates, with ability to bridge cracks ,cold applied, water-proofing membrane that is highly elastic and UV resistant. ASTM D 6083-97a Waterproofing and heat reflecting system having following key performance properties: 1.UV resistant, prevent yellowing and weathering, 2.Highly elastic upto 350% and crack bridging, 3.Excellent adhesion on porous and non-porous substrates, 4. Tensile Strength >10 N/mm2 with GeoTextile fleece, 5. Soler Reflective Index (SRI) more then 109-111 ASTM E1980-11 System: First coat:Providing and applying OEM prescribed compatible primer over the prepared surface for adhesion and bridging cracks. Coverage: 0.2kg/m2(with 50% dilution of water Reinforcement: Geotextile 40 gsm Second coat: highly elastic, UV-resistant membrane one-component, water-based, liquid, and solvent-free coating for adhesion on various surfaces, including porous and non-porous substrates,with ability to bridge cracks. Consumption: 0.5 kg/m2. Third coat: highly elastic, UV-resistant membrane one-component, water-based, liquid, and solvent-free coating for adhesion on various surfaces, including porous and non-porous substrates,with ability to bridge cracks. Consumption : 0.8 kg/m2. System buildup-1.5kg/sqm with geotextile of 40gsm

M&L PCC 75mm thick type C2, 1:3:6 (40mm graded aggregate) in plinth protection/path/Hardstanding finished even and fair all as specified.

S&F Structural steel works of Fe 410W (Gde E 250) quality B, as in Roof trusses (framed), trussed, purlins, posts, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, tube or flat sections) including distance pieces, cleats etc.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPs as in roof covering fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and as directed.

Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches,sockets, ceiling roses,bell push,bell electric,lamp holder, pendants, regulators, sockets,light fittings any type and any type switch board wooden/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Taking down carefully unserviceable DBs of any type/size with MCBs and disconnecting and making good disturbed surfaces complete all as directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store and Hanging to same location to ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose after completion of point wiring.

Taking down Exhaust fan from wall and sealing cable end, keeping it in store and fixing it to same location and connecting up including provision of cable from ceiling rose after completion of point wiring.

Taking down geyser and keeping it in store and fixing it to same location and connecting up with cable after completion of point wiring.

M&L in replacement for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 6.0 Sqrmm for earth wire unsheathed , multistranded , copper conductor FRLS, drawn through concealed rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length . ( including taking down old sub main wiring) Note : 1) Wiring shall be done in proper colour coding.2) Rates are inclusive of cutting / chasses with suitable PCC works and making good to disturbed surfaces.

M & L in replacement for complete point wiring with 1.5 Sqmm two single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in new concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , including modular galvanised flush boxes of suitable size along with Modular white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc and including making good the disturbed surface as per existing complete all as specified and as directed by Engr In Charge for the following :- Note :1) Wiring shall be done in proper colour coding. 2) Rates are inclusive of cutting / chasses withsuitable PCC works and making good to disturbed surfaces.

All as per item No 101 above but for multi 5 pin 5 amp socket outlet on same board ISI marked complete all as specified and directed

All as per item No 101 above but for multi 5 pin socket outlet 5 amp socket on independent board ISI marked complete all as specified and directed

All as per item No 101 above but for One bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 Sq. mm size

All as per item No 101 above but for multi 6 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 sqmm copper conductor multistrand cable pvc insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsheathed copper conductor multistranded cable 2.5 sqmm as earth wire FRLS pvc insulated in green color all as directed by engr-in-charge.

S&F Modular Socket, 6A - 5 pin combined 2 module, 240 volts ISI marked complete all as specified and directed

S&F Modular switch 1 module 6A,1 module , 240 volts ISI marked complete all as specified and directed

S&F Modular bell push 6A, 1 module , 240 volts ISI marked complete all as specified and directed

S&F Ceiling rose, 3 Pin/PVC/polycarbonate isolated body ISI marked complete all as specified and directed

S&F Modular switch 1 way 16A, 1 module , 240 volts ISI marked complete all as specified and directed

S&F Modular Socket 6A/16A - 6 pin combined 2 module, , 240 volts ISI marked complete all as specified and directed

S&F Calling bell Ding Dong AC 230 Volts, single pole ISI marked complete all as specified and directed

M& L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

M& L Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K Complete all as directed.

S&F in replacement LED lights fitting 1x 20W, 220V, batten type complete with LED tube rod 20 Watt with driver, holder and power factor >0.9, 100 Lumen/Watt, 6500 K cool day type, minimum surge protection 2.5 KV conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F Vertical Distribution Board (V.TP&N) 4 way double door suitable for TPN 4 pole 63 Amp 16 KA four pole as incomer, it should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed.

M&L for distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as directed by Engr-in-Charge. Note:- Distribution board and MCBs should be same make.

Supply and fixing in SPN 40 to 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 6 to 32 AMP Complete with connection testing and commissioning.

M&L in replacement for Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

S & F LED light fitting 10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver,with Surge protection Minimum 4 / 5 KV lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete.

Supply and fixing in replacement 415V 16 KA MCCB TPN 63 Amps current carrying capacity in the DB complete with connection testing and commissioning

Supply and fixing Modular Fan step regulator, 100W - 1 module 240 volts ISI marked complete all as specified and directed

Disconnecting & taking out defective service cable any size and any type from roof, pole, pipe, floor, wall etc

Supply and laying, connecting and testing XLPE underground cable insulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 25 sqmm 4.0 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc. Note: (i) Earth work, sand, bricks , removing, returning filling Aluminium thimbles/lugs will be paid separately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments , machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in loose/soft soil and getting out for underground cable/erection of poles, stays etc complete all as specified and as directed by Engineer-in-Charge.

Supply, laying and fixing of DWC HDPE pipe for protection for power cable (orange in colour) of size 50 mm dia complete with joint fittings and including cutting, jointing and clamping all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed by Engineer-in-Charge.

Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed by Engineer-in-Charge.