Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.3 LAccepted-AOC UDHAM SINGH SARANI ASHRAMPARA PO SILIGURI DISTT DARJEELING 734 001 | JALPAIGURI | WEST BENGAL | 734001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹46.2 L+₹1.5 L (3.30%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹46.2 L+₹1.5 L (3.31%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹46.5 L+₹1.8 L (4.02%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹46.7 L+₹2.0 L (4.52%)Rejected-Finance BIDHAN PALLY OODLABARI P O MANABARI P S MALBAZAR DIST JALPAIGURI | JALPAIGURI | L5 | Rejected-Finance Not Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
20 Jul 2022, 6:00 pmClosed
GE SEVOKE ROAD
GE SEVOKE ROAD POST SALUGARA DIST JALPAIGURI WEST BENGAL
REPAIR AND MAINT OF DG SETS AND UNSERVICEABLE CABLE AND VEHICLES AT SEVOKE STN UNDER GE SEVOKE ROAD
2022_MES_529910_1
GE/SEV/08 of 2022-23
Open Tender
Civil Works
Item Rate
270 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹90,000
Yes
6 Aug 2022
10 Jun 2022
22 Jul 2022
10 Jun 2022
20 Jul 2022
5 Jul 2022
11 Jun 2022 - 20 Jun 2022
Amount
Maintenance & servicing of existing make and model DG set including tappet cover adjustment & gasket replacement of capacity 12.5 KVA, including replacement of following spares complete all as directed. Note: Spares will be measured separately as supply only.
Supply only of Fuel Filter
Supply only of Lubricant oil filter
Supply only of Coupling
Supply only of Fan belt
Supply only lubricant oil supply pipe
Maintenance & servicing of existing make and model DG set including tappet cover adjustment & gasket replacement of capacity 25 KVA , 30 KVA & 32.5 KVA including replacement of following spares complete all as directed. Note: Spares will be measured separately as supply only
Supply only of Fuel Filter
Supply only of Lubricant oil filter
Supply only Air Filter element
Supply only Radiator hose pipe set
Supply only Fan belt
Maintenance & servicing of existing make and model DG set including tappet cover adjustment & gasket replacement of capacity 40 KVA including replacement of following spares complete all as directed. Note: Spares will be measured separately as supply only
Supply only of Fuel Filter
Supply only of Lubricant oil filter
Supply only Radiator hose pipe set
Supply only Fan belt
Maintenance & servicing of existing make and model DG set including tappet cover adjustment & gasket replacement of capacity 75 KVA including replacement of following spares complete all as directed. Note: Spares will be measured separately as supply only
Supply only of Fuel Filter
Supply only of Lubricant oil filter
Supply only Radiator hose pipe set
Supply only Fan belt
Supply only high pressure oil pipe
Maintenance & servicing of existing make and model DG set including tappet cover adjustment & gasket replacement of capacity 250 KVA including replacement of following spares complete all as directed. Note: Spares will be measured separately as supply only
Supply only of Fuel Filter
Supply only of Lubricant oil filter
Supply only Radiator hose pipe set
Supply only Fan belt
Maintenance & servicing of existing make and model DG set including tappet cover adjustment & gasket replacement of capacity 500 KVA including replacement of following spares complete all as directed. Note: Spares will be measured separately as supply only
Supply only lubricant oil filter
Supply only of Fuel Filter
Supply only of Air Filter
Maintenance & servicing of existing make and model DG set including tappet cover adjustment & gasket replacement of capacity 800 KVA including replacement of following spares complete all as directed. Note: Spares will be measured separately as supply only
Supply only lubricant oil filter
Supply only of Fuel Filter
Supply only of Air Filter
M & L for taking out old U/S engine oil from DG Sets sumps, cleaning the sump throughly, supply & filling new engine oil complete of Make: Servo Super 20W40 of Indian Oil or Equivalent grade of Hindustan Petroleum as approved by GE, complete all as directed.
M & L for topping up of coolant in radiator of DG set ,complete all as directed.
M & L for dismantling of FIP for overhauling and calibration in authorised workshop including replacement of worn-out rings plungers, damper plate, gasket etc reassembling and testing complete all as directed for following DG Set:
25 KVA to 32.5 KVA
Repair Overhauling of self starter including replacement of worn out clutch assembly bush, spring, plunger assembly, solenoid switch, carbon brushes,spring etc complete all as directed for the following DG sets:
25 KVA to 32.5 KVA
Repair/Overhauling of dynamo/charging alternator including replacement carbon, brushes holder, spring commutator/slip ring assembly bearing regulator of any make , type and capacity complete all as directed.
Cleaning of the fuel tank of DG sets of following capacity after decaning the diesel, after through cleaning with kerosene oil including replacement of level indicator pipe complete all as directed.
25 KVA to 32.5 KVA
Dismantling and removing of water pump assembly complete from the engine, repair/overhauling the same by replacing worn ou components like bearing, impeller, bushes, oil seal, water seal, gasket etc. re-assembling, refixing and testing complete all as directed for the following capacity of DG sets:
15KVA/30KVA/31.5KVA/40KVA
S & F in replacement of old U/S automatic voltage regulator suitable for DG set of following rating of approved Make & model by the GE, complete all as directed.
30KVA to 40KVA
M & L for replacement of old U/S stop solenoid 30KVA to 50KVA DG Set complete all as directed.
All as per item No 16 but for 62.5 to 75 KVA
All as per item No 16 but for 125 to 250 KVA
Dismantaling of radiator of DG Set of capacity 25 to 50 KVA and transporting to work shop for servicing/cleaning after dismantling twin tanks, replacement of gasket packing, nuts bolts, washers, descaling with appropriate chemical and welding of copper brazing of damaged fins/tubes and reassembling & refixing in same position after tesing complete all as directed.
All as per item No 19 but of capacity 75 KVA
All as per item No 19 but of capacity 250 KVA
All as per item No 19 but of capacity 500 KVA
M & L for dismantling of FIP of 500 KVA DG set for overhauling and calibration in authorised workshop including replacement of worn-out rings plungers, damper plate, gasket etc reassembling and testing complete all as specifed and as directed.
M & L for repair Overhauling of self starter of 500 KVA DG set including replacement of worn out cluthc assembly bush, spring, plunger assembly, solenoid switch, carbon brushes,spring etc complete all as specified and as directed.
M & L for cleaning of the fuel tank of DG sets of 500 KVA capacity after decaning the diesel, after through cleaning with kerosene oil including replacement of level indicator pipe complete all as specified and as directed:
M & L for dismantling and removing of water pump assembly of DG sets of 500 KVA capacity complete from the engine, repair/overhauling the same by replacing worn out components like bearing, impeller, bushes, oil seal, water seal, gasket etc. re-assembling, refixing and testing complete all as specified and directed.
M & L for dismantling and removing of water pump assembly of DG sets of 800 KVA capacity complete from the engine, repair/overhauling the same by replacing worn out components like bearing, impeller, bushes, oil seal, water seal, gasket etc. re-assembling, refixing and testing complete all as specified and directed.
M & L for cleaning of the fuel tank of DG sets of 800 KVA capacity after decaning the diesel, after through cleaning with kerosene oil including replacement of level indicator pipe complete all as specified and as directed:
M & L for repair Overhauling of self starter of 800 KVA DG set including replacement of worn out clutch assembly bush, spring, plunger assembly, solenoid switch, carbon brushes,spring etc complete all as specified and as directed.
M & L for dismantling of FIP of 800 KVA DG set for overhauling and calibration in authorised workshop including replacement of worn-out rings plungers, damper plate, gasket etc reassembling and testing complete all as specifed and as directed.
M & L for service of 800 KVA DG Set control panel complete all as specified and as directed.
M & L for Radiator inter cooler cleaning and pressure testing at workshop of 800 KVA DG Set complete all as specified and as directed.
M & L for replacement of SMPS based ElectronicBattery Charger suitable for 12/24 Volts battery charging system complete all as specified and as directed.
M&L for painting of DG sets out side with synthetic enamel paint with grey/blue clour scrubbing preparation for painting and numbering of SM No/MES No writing with white paint on Engine as well as alternators at different location and size complete all as directed.
30 KVA TO 40 KVA
Supply and replacement of old unserviceable battery 12Volts 150 AH maintenance free suitable for DG sets complete as specified and directed. Make : Exide/ Luminous/AMRON
Supply and replacement of old unserviceable battery 12Volts 180 AH maintenance free suitable for DG sets complete as specified and directed. Make : Exide/ Luminous /AMRON
M & L for replacement of on load change over switch 4 pole, 415Volt, of capacity 63Amps, complete as specified and directed. Make: L&T/Legrand/ABB/Siemens
M & L for replacement of on load change over switch 4 pole, 415Volt, of capacity 100Amps, complete as specified and directed. Make: L&T/Legrand/ABB/Siemens
M & L for replacement of on load change over switch 4 pole, 415Volt, of capacity 200Amps, complete as specified and directed. Make: L&T/Legrand/ABB/Siemens
M & L for battery teriminals including removal of existing unserviceable one compete all as specified.
Labour only overall inspection of unserviceable DG set of any capacity and make it fuctional by minor repair without replacement of any spare parts complete all as specified and as directed by Engr-in-charge.
M & L for rewinding burnt coils of Induction alternator of DG set capacity 12.5 KVA including dismantling of alternator, with super enamelled copper winding wire as per existing size and guage to achieve the required /specified RPM including taking out old unserviceable winding ,cleaning/ repairing damaged slots , assembling and testing, running 4 hrs continuous run complete all as specified and as directed.
M&L MCCB 4 Pole, including taking down old u/s having current rating 200 Amp, thermal magnetic setting adjustable 70%-100% breaking capacity 25 KA at 415V,50Hz, Frame size/type CH along with spider links complete all as specified and as directed
M&L MCCB 4 Pole, including taking down old u/s having current rating 160 Amp, thermal magnetic adjustable 70%-100% breaking capacity 16kA at 415V,50Hz, Frame size/type CH along with spider links complete all as specified and as directed
M&L MCCB 4 Pole, including taking down old u/s having current rating 63-100 Amp, thermal magnetic adjustable 70%-100% breaking capacity 16 KA at 415V,50Hz, Frame size/type CH along with spider links complete all as specified and as directed
M&L transportation of defective alternator of DG set OF CAPACITY 500 KVA to workshop including disconnecting electrical connections dismantlingthe alternator and reassembling the same after repair reconnecting all electric connections and testing on full load complete all as specified and as directed
M&L for rewinding burnt coils of Induction alternator of DG set capacity 500 KVA including dismantling of alternator with super enamelled copper winding wire as per existing size and guage to achieve the required specified RPM including taking out old unserviceable winding cleaning repairing damaged slots assembling and testing running 4 hrs continuois run complete all as specified and as directed
Supply and fixing fan suitable for 500KVA alternator as per existing complete all as specified and as directed
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of UG cable/pipe in soft loose soil complete all as specified and as directed.
M&L for returning filling in including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick all as specified.
Removing excavated material n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as directed.
M&L for provinding in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level complete all as directed. by Engr-in-Charge. Note : Punned thickness shall be measured.
Supply and laying burnt clay sub class B brick as cable protection complete all as directed.
Supply & fixing of trolly, suitable for 40 KVA DG Set of existing size mounted on four tyre wheels along with coupling arrangement and mounting DG Set on trolly with necessary fixing arrangements complete all as specified and as directed Note : Cost of T&P for lifting lowering DG set on trolly is deemed to be including in item rate
Supply and fixing GI pipe 40 mm bore medium grade for UG cable protection with all fitting fixed to pole or laid in trenches or laid in floor/rood complete all as directed.
M & L for laying LT underground Cable, including takingdown existing u/s XLPE insulated, heavy duty armoured sheathed 1100 volts grade 16 Sq mm, 4 core, with aluminium conductor, ISI marked as per IS : 7098(Part-1) complete all as specified.
All as per item No 56 above but 35sqmm, 3.5 core all as specified.
M & L for cutting of vegetation bushes, dressing of hageses etc including cleaning/ maintenance of MT yard area.
Removing old sand to a distance not exc 50 mtr & depositing where directed complete all as specified & diected
M & L for sand cushioning with clean, dry sand in Fol Store dump complete as specified and directed.
M&L for boring holes 2mtr deep in soil under roads/PCC as directed for cable passing through pipes of required size and disposal of soil to a distance not exc. 50m. (Note: Pipes shall measured and paid seperately under relevant items).
Supply and fixing cable junstion box having protection , weather proof, dust proof, acid resistant, shock proof, fire retardent self extinguisher" for outside installation with knockout entry for cable of size 16sqmm 4 core and 155x210x92mm with terminals, brackets for street light pole mounting and provision of one 6A MCB SP complete all as directed.
M&L for water proof, 3core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade for electrical connection of street light fittings,complete all as directed.
BLANK
M&L for cement concrete in foundation, filling mass concrete type-C2, 1:3:6, (40mm graded crushed stone aggregate) complete all as specified and as directed.
S & F cable jointing kit for 1.1 KV grade for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 10 to 35Sqmm, indoor/outdoor type including taking out & relaying damaged cable after repair complete all as specified and as directed.(Excavation and connected items will be measured and paid separately.)
S&F in repair 5 KW three phase automatic street light timer switch for automatic switching on/off street light based on lux level of nature light consisting of sensor overload protection fuse gear, power contactor & MCB of suitable capacity terminal blocks for cable entry & control unit enclosed in pole/wall mountable elcosure made out of rust proof shock proof termite proof FR grade SMC confirming ti IP 66 with universal lock and key arrangements complete all as specified and as directed.
M & L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground earth pit not less than 2.25 mtrs below normal ground level with the top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4mm as earth lead by mean of nut/bolt and washer of galvanized iron or steel as shown in electrical plate no 3 of SI part I including necessary excavation and earth work GI pipe 20mm dia light grade for watering and GI 32mm dia light grade pipe for protection of GI earth strip etc, PCC chamber with PCC cover in cement concrete 1:2:4 type B1 (15mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc connected to rest point as indicated including testing complete all as directed.
BLANK
M&L for carrying out general periodical servicing and checking of the complete engine / transmission system / suspension system / exhaust system /cooling system / Electrical system and braking sysytem complete along carring out wheel Rotation /Alignment along with greasing of wheel bearings and rectify for the minior complaints defects as per manufacturer recommendation / particular specification including along with replacement of required necessary minor spares such as nut,bolts, fuses and Replacement of diesel / Petrol Fuel filter (Primary and secondary) and Engine oil filter complete sets along with o rings, new nuts and washers and cleaning of air filters/ breather,Radiator tank with Blower and labour for filling/topping up and Replacement of Engine oil /coolant / brake oil and tuning and testing of engine under ideal and load conditions for as listed 4 wheeler vehicle all as specified and directed Note (i) Rate Quoted includes the cost of minor acessories such as nuts and bolts O rings and all fuel/lube filters (ii) Engine Oil and Coolant , air filter, spark plugs shall be measured and paid under relevant Item. (iii) Major Unserviceable items shall be measured and paid under relevant Item.
Tata Yodha/Tata 207
Tata Indigo
Maruti Eeco
Maruti SX4
Eicher 10.75 E
Maruti Gypsy
M&L for carrying out general periodical servicing and checking of the complete engine / transmission system / suspension system / exhaust system /cooling system / Electrical system and braking sysytem complete along carring out wheel Rotation /Alignment along with greasing of wheel bearings and rectify for the minior complaints defecects as per manufacturer recommendation / particular specification including along with replacement of required necessary minour spares such as nut,bolts, fuses and Replacement of diesal / Petrol Fuel filter (Primary and secondary) and Engine oil filter complete sets along with o rings, new nuts and washets and cleaning of air filters/ breather,Radiator tank with Blower and labour for filling/topping up and Replacement of Engine oil /coolant / brake oil and tuning and testing of engine under ideal and load conditions for as listed 2 wheeler vehicle all as specified and directed Note (i) Rate Quoted includes the cost of minor acessories such as nuts and bolts O rings and all fuel/lube filters (ii) Engine Oil, spark plugs and air filter shall be measured and paid under relevant Item. (iii) Major Unserviceable items shall be measured and paid under relevant Item.
Hero Motor Cycle splendar+
Royal Enfield 350 CC STD Ball
Removal of wornout seat cover and supply and fixing of best quality leather seat cover for all the seats of each vehicle such as Tata Indigo, Maruti Eeco, Maruti SX4, Maruti Gypsy, etc as approved by GE including ceiling cover and foot mat complete all as specified and directed.
Material and labour for complete removing of oil deposits, repairs to dents, minor tinkering works and cleaning all the external surface of the EICHER along with enclosures, fuel tank and connected pipe lines from oil/paint /corrosion flakes completely and applying one coats of red oxde paint and one coat of automobile grade on external surfaces and corrosion free under coat at bottom and chasis of the vehicle using spraying machine/air compressor the existing colour of blue / golden yellow and chassis Black Complete all as specified and directed.
Strip opening of the vehicle along with the engine aganist repairs, over haul and checking of the complete engine / transmission system / suspension system / exhaust system /cooling system / Electrical system and braking system complete other complete parts of veh Eicher and segricating of servicable / unservicable parts and refixing of servicable parts after cleaning including servicing , greasing , electrical work along with replacement / refixing of the unserviceable parts complete and testing of vehicle after repair for satisfaction of Engineer-in -Charge. Note:-Unservicable parts will be measured seprately
Supply only the following Spares with acessories suitable for Eicher 17.50 E Make: As per Existing/as per OEM recommendation
Air Filter
Dust evacuation cap, Air cleaner (E 433 TCI)
Oil seal hub front and rear wheel
Wheel Bearings Rear-02 nos and Front -02 nos
Engine OIL seals complete set
Engine Top cover gas kit
Gasket Rear Axil shaft
Washer internal
Inlet and Xhaust Valves
Mud Flaps Rear and Front
Wheel brake Cylinder Kit FR FL/ RR RH
Brake Pads/Liners FR FL/ RR RL
Head Light lamp
Tail / back light lamp
Tail Light Assembly RH /LH
Head Light Assembly
side turn indicators with lamp assembly
Self Starter Motor (PRD TYPE)
Engine temperatute senor
Radiator Coolant
Radiator Fan 150W
Brake Booster
Clutch padal Cable with inner and Outer
Throtle cable with inner and outer
Parking Brake Cable with inner and outer
Clutch Disc Assy -275
Assy Clutch Release Bearing
Arm Clutch Release
Cover Clutch Rocker Arm
Power Cylinder (BIL)
Pressure Plate
Mirror RH rear view adjustable as per OEM
Mirror LH rear view adjustable as per OEM
Bumper LCV (Primered)
Bumper Corner LH
Bumper Corner RH
Door RH/LH Handles with lock and key
Suspension shock absorber Front/Rear
Horn 12V LF/HF
Battery terminal
Radiator Fan Relay
Fan belt
Mateial and labour for complete removal and replacement of Eicher Rear load Cabin basement sheet as per the existing design and size not less than 4 x 2.0 mtr along with necessary welding / tinkering / fastening with acessories and apply a coat of red oxide and two coats of synthetic enamel paint over the top and bottom surfaces
Removing of the complete Top cover of the rear cabin and supply and fixing of BEST Quality water Proof Tarpaulins of size 12.5 x 15 feet of approved colour (dark grey) with side 4 nos windows on left and right and fixing the entire top cover with nylon rope and necessary accessories complete as approved and directed by Engineer-in-charge
M & L for prepration of old painted surface by scrapping and cleaning agent and painting with two coat of enamelled paint over a coat of red oxide primer including making number plate and marking veh BA No., formation / UNIT name sign with flourecent / refelective stickers , and all other sign all as directed by engineer -in -charge
M&L for removing of damaged portion of body parts and making good by welding of new sheet,plate channel etc including replacement of unservicable nut,bolt & washer complete all as specified and directed by Engineer-in-charge.
Material and Labour for removal of worn out wooden seats and supply and fixing of Wooden/Water Proof Ply wood base seat with foam coir cushion and rexin cover on the top on the bothLH/RH the along side of the Eicher rear Cabin along with Necessary acessories and steel work complete all as specified and directed
Strip opening of motor cycle Hero Honda 97CC capacity engine by the dismentling of servicable / unservicable parts over haul and refixing of servicable parts after cleaning including servicing and greasing and fixing of the unserviceable spares with new ones complete all as specified and testing of vehicle after repair for satisfaction of Engineer-in -Charge. Note:-Spare Parts will be measured and paid seprately as supply only.
Supply only the spares/acessories for motor cycle hero honda 97 CC 2 wheeler
Head Light fitting Assembly with lamp and Holder
Turn signal blinker RH/LH Assembly with Lamp amber colour
Blinker Cut out
Self Starter brushes
Tail Lamp Assembly with Lamp
Horn 12V
Head Light lamp
Blinker lamp
Tail Fitting Lamp
Chain Spoket and Chain
Brake Pads Set Rear
Brake Pads Set Front
ForK Oil
Rear Suspenion with Bush kit
Front Suspension fork
Wheel Bearings Rear-02 nos and Front -02 nos
Head Gaskit
Inlet and Xhaust Valves
Alternator Coils
Lever Neutral limit Switch
Carburator Float and Jets
Air Filter
Spark Plug
Ignitor Coil
Tyre and tube Front 2.75 x 18 4PR/42P
Tyre and Tube Rear 2.75 x 18 6PR/48P
Binker Buzzer
Crank / Chain Drivr Cover
Kick Rod
Front MUD Guard
Rear MUD guard
Carburator assembly complete
Air intake/ carburator BOOT set with clamps
Gear shift Lever
Accelator Cable with inner and Outer
Front Brake Cable with inner and Outer
Front wheel speedo meter cable inner and outer with teflon spur gears
Clutch Cable with inner and outer
Clutch /Mesh Plates set
Rear View Mirror LH/RH
Front Fork Bearings Set
Rubber Pads Front and Rear wheel Hub
Piston O rings /compression and lubrication rings set Assembly
Strip opening of motor cycle Royal Enfield 350 CC capacity engine by the dismentling of servicable / unservicable parts over haul and refixing of servicable parts after cleaning including servicing and greasing and fixing of the unserviceable spares with new ones complete all as specified and testing of vehicle after repair for satisfaction of Engineer-in -Charge. Note:-Spare Parts will be measured and paid seprately as supply only.
Supply only the spares/acessories for motor cycle Royal enfield 350CC 2 wheeler.
Head Light lamp
Tail light Assemble with Lamp
Spark plug
Valve kit
Arm valve rocker
Shaft rocker arm
Nut tappet adjusting
Screw, tappet adjusting
Cam chain kit
Disc clutch friction
Plate clutch
Centre clutch
Plate clutch pressure
Gaskit kit (Primary)
O Ring kit
Oil seal kit
Rotor neutral switch
Spindal cam chain guide sprocket
Fork gear shift
Pin gear shift Fork
Hole cap tap adjst
Switch assy. FR stop
Gasket exhaust
Pin guide roller
Speedometer drive kit
Pump assy oil
Flap tire(1.60-18U)
Switch assy winkar
Nut cap 7 mm
Plug rubber 19mm
Bulb TL &ST/Light (12V-21SW)
Drain plug bolt
Cable comp clutch
Shoe comp break
Repair to battery charger by opening of battery charger and segrigateing of servicable /unservicable parts including fixing of servicable parts after cleaning and replacement of the following items Note:-Spare Parts will be measured and paid seprately as supply only.
Supply only Volt Meter 0-12v
Supply only Am Meter 0-20 Amp
Supply only Battery charger lead of Copper conductor single core stranded 2.5 sq mm
Supply only Fuse
Supply only Crocidle Clip
Repair to vehicle washing machine with cleaning ,greasing and servicing and replacement of water hose pipe 40 RM as per sample, spray nozzele-2 Nos and fan belt -1 No as per sample including testing for proper working complete.
Repair to Air compressor machine with cleaning ,servicing and greasing including replacement of the fan belt - 01 No of existing size, drain plug, air hose pipe- 20 RM and nozzele-01 No,including testing complete for satisfactory working.
Strip opening of the Vehile along with engine and other parts of veh Maruti SX4 for Over haul and segricating of servicable / unservicable parts and refixing of servicable parts after cleaning including replacement of unserviceable spares servicing and greasing complete and testing of vehicle after repair for satisfaction of Engineer-in -Charge. Note:-Unservicable parts will be paid and measured seprately under respective serial Nos. Note:-Spare Parts will be measured and paid seprately as supply only.
Supply only of the following parts suitable for the vehicle Maruti SX4
Pad kit 1.8 Disc brake
Lining Repair kit
jack seal streaing AMB
Streaing bush kit
Distance tube suspension
Buishing kit suspension
Shock absorber front
Shock absorber rear
Timing belt
Fan belt
Hose Radiator bottom AMB 1.8
Hose Radiator bottom 2.5
Latch Assy front door
Latch Assy rear door
Ignition Spark Plug
AIR Brether/ Filter
Lower sump gaskit
Wiper Blade N/M
Fuel pump submerg Assy
Secondary Fuel Filer
Distrubutor unit with Cables and caessories
Door glass movement Gear Mechanisum
Door outer Handle LH
Door outer Handle RH
Glass Front Door LH
Glass Front Door RH
Seat belt kit complete
Break Assy Front LH
Break Assy Front RH
Alternator Assy
Head lamp Assy w/ bulb Front
Clutch Plate & Pressure Plate set
Starter Motor 12 volt suitable for car Ambassdor
Tie Rod RH/LH of front suspension
Swing Arms RH/LH of Front suspension
Head Light lamp
Tail Light Assembly RH /LH
Brake Liners rear
Brake booster
Brake cylinders assy
Clutch Cable inner and outer
Accelator Cable with inner and Outer
Horn 12V with relay
Brake Disk FL/FR
Front disk break pads kit
Gear shifting position Kit
Suspension shock absorber Front/Rear
Strip opening of the Vehile along with engine and other parts of veh TATA Indigo for Over haul and segricating of servicable / unservicable parts and refixing of servicable parts after cleaning including replacement of unserviceable spares servicing and greasing complete and testing of vehicle after repair for satisfaction of Engineer-in -Charge. Note:-Unservicable parts will be paid and measured seprately under respective serial Nos. Note:-Spare Parts will be measured and paid seprately as supply only.
Supply only of the following parts suitable for the vehicle TATA Indigo
Pad kit 1.8 Disc brake
Lining Repair kit
Streaing bush kit
Distance tube suspension
Buishing kit suspension
Shock absorber front
Shock absorber rear
Timing belt
Fan belt
Hose Radiator bottom AMB 1.8
Hose Radiator bottom 2.5
Latch Assy front door
Latch Assy rear door
Ignition Spark Plug
AIR Brether/ Filter
Lower sump gaskit
Wiper Blade N/M
Fuel pump submerg Assy
Secondary Fuel Filer
Dicky Cover
Door outer Handle LH
Door outer Handle RH
Glass Front Door LH
Glass Front Door RH
Seat belt kit complete
Break Assy Front LH
Break Assy Front RH
Alternator Assy
Head lamp Assy w/ bulb Front
Clutch Plate & Pressure Plate set
Starter Motor 12 volt suitable for car Ambassdor
Tie Rod RH/LH of front suspension
Swing Arms RH/LH of Front suspension
Head Light lamp
Tail Light Assembly RH /LH
Brake Liners rear
Brake booster
Brake cylinders assy
Clutch Cable inner and outer
Accelator Cable with inner and Outer
Horn 12V with relay
Differential Gears Bearings
Brake Disk FL/FR
Front disk break pads kit
Gear shifting position Kit
Suspension shock absorber Front/Rear
Strip opening of the Vehile along with engine and other parts of veh Maurti Gypsy/Eeco for Over haul and segricating of servicable / unservicable parts and refixing of servicable parts after cleaning including replacement of unserviceable spares servicing and greasing complete and testing of vehicle after repair for satisfaction of Engineer-in -Charge. Note:-Spare Parts will be measured and paid seprately as supply only.
Supply only of the following parts suitable for the vehicle Gypsy/Eeco
Pad kit 1.8 Disc brake
Lining Repair kit
Streaing bush kit
Distance tube suspension
Buishing kit suspension
Shock absorber front
Shock absorber rear
Timing belt
Tensioner Pulley
Fan belt
Hose Radiator bottom AMB 1.8
Hose Radiator bottom 2.5
Latch Assy front door
Latch Assy rear door
Ignition Spark Plug
AIR Brether/ Filter
Lower sump gaskit
Wiper Blade N/M
Fuel pump submerg Assy
Secondary Fuel Filer
Dicky Cover
Door outer Handle LH
Door outer Handle RH
Glass Front Door LH
Glass Front Door RH
Seat belt kit complete
Break Assy Front LH
Break Assy Front RH
Alternator Assy
Head lamp Assy w/ bulb Front
Clutch Plate & Pressure Plate set
Starter Motor 12 volt suitable for car Ambassdor
Tie Rod RH/LH of front suspension
Swing Arms RH/LH of Front suspension
Head Light lamp
Tail Light Assembly RH /LH
Brake Liners rear
Brake booster
Brake cylinders assy
Clutch Cable inner and outer
Accelator Cable with inner and Outer
Horn 12V with relay
Differential Gears Bearings
Brake Disk FL/FR
Front disk break pads kit
Gear shifting position Kit
Suspension shock absorber Front/Rear
Strip opening of the vehile along with engine for over haul, of veh TATA 207 and segricating of servicable / unservicable parts and refixing of servicable parts after cleaning including servicing and greasing complete and replacing the unserviceable spares parts complete all as specified and testing of vehicle after repair for satisfaction of Engineer-in -Charge. Note:-Spare Parts will be measured and paid seprately as supply only.
Supply only of the following spare parts / acessories suitable for veh TATA 207
Pistion set (Reduced comp hight) w/o ring
Connecting Rod Bush set STD
Connecting Rod Bearing set
Thrust washer set STD
A/C Bearing set STD
Radiator Assembly
Ring sealing Half
Crank shaft Gear
Steering Pump Belt
Valve tappat
Push Rod
Rocker Arm shaft
Kit Engine overhauling Gasket
Steering Universal Joints/Spindels
Set valves inlet
Valve seat ring inlet normal
Valve seat Exhaust STD
Engine mounting PAD Front LH
Engine mounting Pad Front RH
Oil filter Element
Coolent long life (1 Ltr )
Universal joint cross
Service indicator
RV Mirror outer LH
Horn 108 Dia
Fuel filter element
Solenoied switch of self starter
Assy Head lamp LH/RH
Gear Lever boot
Door lock
Door latch
Assy 240 Dia Clutch Disc
Assy 240 Dia Clutch pressure plate
Radiator Assembly
Assy Oil pump
Break Drum Rear
Silencer Assy
Assy Rear Spring
Assy Propeller shaft
Clutch Cable
Accelator Cable
Universal Joint Cross
Seat cover
Head lamp assy RH /LH
Gear liver boot
Air filter
Turn indicator
Stater motor with solinoid switch
Alternator with regulator
Tie rods FL/FR
Suspension Bush Kits
Shock absorbers Front/Rear
Tail lamp assembly complete with acessories
Radiator Fan Motor
Supply only differential Oil 85W-140
Suppy only Engine Radator Coolant
Supply Only Brake Oil Dot 3
Suppy only Engine Oil 15W40
Removing of unservicable maintanance Free heavy duty 12 Volt Battery and supply & fixing in Replacement maintanance Free heavy duty 12 Volt 70 AH Batttery Make :Luminious/ Amaron/EXIDE.
Removing of unservicable maintanance Free heavy duty 12 Volt Battery and supply & fixing in Replacement maintanance Free heavy duty 12 Volt volt 35 AH Batttery Make : :Luminious/ Amaron/EXIDE.
Removing of unservicable maintanance Free heavy duty 12 Volt Battery and supply & fixing in Replacement maintanance Free heavy duty 12 Volt volt 8 AH Battery Make : :Luminious// Amaron/EXIDE.
M & L in replacement for Cover outer 700 x16 with tube inner suitable for TATA 207 including tube inner for 7.00 x 16 make: Ceat /MRF
M & L in replacement for Cover outer 2.75 x 18-4PR /42P suitable for Motor cycle including tube inner for same size. make: Ceat /MRF
M & L in replacement for Cover outer 7.50 x16 ,12 PR suitable for EICHER including tube inner for same size Make: CEAT/MRF
M & L in replacement for Cover outer 175/65 R-14 tube less ,12 PR suitable for TATA Indigo make: Ceat /MRF
M & L in replacement for Cover outer 175/65 R-15 tube less ,12 PR suitable for Maruti SX4 make: Ceat /MRF
M & L in replacement for Cover outer F78 with tube inner ,15 PR suitable for Maruti Gypsy make: Ceat /MRF
Material and labour for servicing of the air conditioning system of veh including replacement of the following parts and cleaning of cooling coil and cleaning the copper/aluminium film complete and filling of refrigerant gas complete all as directed. Note : Spare parts shall be measured saperately as supply only.
Supply only Cooling Coil
Supply only Air filter
Supply only Copper pipe of suitable size
Supply only Refrigerant gas
Supply only Cut out
ADHIKARY CONSTRUCTION
CHANDAN TRADERS
D.D. BROTHERS
RAJIV DEY SARKER
SRI SURAJIT SENGUPTA
SHRI JIBANDHAN PAUL
Biswas Brothers Co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .