REPAIR AND PAINTING POLISHING OF CERTAIN MISC FURNITURE ITEMS AND CHARPOY GI PIPE WITH NEWAR PLY TOP AT GE FAIZABAD

Amount

Sofa Set 04/05 Seater Drg No. FD-281/ 373 / MAP :- Removing of following existing unserviceable wooden components of various MES F/DB/FD/MAP furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, providing hinges, placing every part in-tact the disturbed portion, as applicable as per drgs and as directed by Engineer-in-Charge. Note:- (i) The work shall be executed where the furniture exist in different User Units under GE Faizabad including BSO Furniture Yard.

Leg made of Ist class hard wood (teak wood) of size as shown on drawing.

Arm rest of seat made of Ist class hard wood (teak wood) of size as shown on drawing.

Front rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing. of three seater

Bearer / Battens made of Ist class hard wood (teak wood) of size as shown on drawing.

Back frame top / bottom /sides made of Ist Class hard wood (teak wood) of size as shown on drawing for 3 seater/single seater

Cushion complete as per shape and size as shown on drawing with 40 dennsity PU foam of size 22”X21”X100/95mm with upholstery of tapestry cloth of range not less than Rs. 450.00 per RM as per sample, colour and shade & quality and providing a chain best quality of make YKK on either of 21" sides with two runners at both ends as approved by GE. Make: Sleepwell, Product-Cool Gel-S/ Godrej or equivalent as approved by GE

M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of Sofa Set 5 seater / 4 seater by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats ofmelamine polish with spray machine to give smooth and glossy finished surfaces complete all as specified and directed.

Charpoy GI pipe FD-220 or similar pattern:

Removing existing unserviceable ply top from GI pipe frame of charpoy, tightening/refixing the serviceable loose parts of the frame and S&F new 12mm thick BWP grade plywood of size 900mm wide x 1980 mm long in single piece, fixed with GI frame using 5mm dia 80mm long flush/countersunk bolts (10 Nos). Each bolt to be fitted with two cup washers & one nut by making/drilling hole of appropriate size in ply and GI charpoy frame all as directed by Engineer-in-Charge

Removing existing unserviceable long rail and S&F new long rail, fabricated from new 32mm dia bore GI medium grade pipe duly threaded as required as per Drg and fixed complete all as directed by Engineer-in-Charge.

Removing existing unserviceable short rail and fixing fabricated short rail as per Drg from old long rail retrieved in replacement from item No. 2.02 above including threading as required complete all as directed by Engineer-in-Charge.

Removing existing unserviceable leg and fixing fabricated leg from old short rail retrieved in replacement from item No. 2.02 or 2.03 above including threading as required with bottom plug made of Sal wood and flat iron clamp 02 Nos for MNF set duly painted with two coats of black paint complete all as directed by Engineer-in-Charge.

Removing existing unserviceable 3 way elbow and S&F new elbow (ISI marked) of suitable for 32mm dia bore GI pipe as per Drg and fixed complete all as directed by Engineer-in-Charge

Removing existing unserveceable check nut and S&F new check nut (ISI marked) suitable for 32mm dia bore GI pipe as per Drg and fixed complete all as directed by Engineer-in-Charge

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finishincluding touching up welded portion with one coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same shall be deemed to be included in the quoted rate of the new part.

Chair Verandah steel FD-359 /MAP and similar pattern:

Removing existing unserviceable part and S&F new conduit section of size as shown on drawing using conduite section 19mm dia 16 gauge including all necessary cutting and welding etc complete all as specified and directed by Engineer-in-Charge.

M&L for spot / run welding (not exc 25mm in length) of steel items including scraping, preparing surface of welded portion, grinding where ever required to give smooth finishincluding touching up welded portion with one coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. Note:- The welding required for fixing of new parts will not be measured against this item. The same shall be deemed to be included in the quoted rate of the new part.

Removing existing rubber shoe of any description and S&F new hard rubber shoe as shown on drawing and directed by Engineer-in-Charge.

Removing old unserviceable PVC frame from chair verandah map and S&F new seat and back frame of chair verandah MAP complete as specified and directed by Engineer-in-Charge.

M&L for preparing old painted and newly replaced/ painted steel parts surfaces of chair verandah including removing dents/spots (if any), cleaning the surfaces, rubbing with emery paper, filling the gaps with putty and applying one coat of synthetic enamel paint as required to give uniform glossy finish complete all as specified and directed by Engr-in-Charge.

Supreme Builders

Saket Traders

Shivam Enterprises

JYOT BUILDERS

M/S NEHAL ENTERPRISES