Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹6.9 LAccepted-AOC R O VILLAGE P O ARKI WARD NO 5 TEHSIL ARKI DISTT SOLAN H P | SOLAN | HIMACHAL PRADESH | 171102 | L-1 | Accepted-AOC L-1 award of contract | |
| 2 | L-2₹7.2 L+₹22,577 (3.26%)Rejected-Finance | L-2 | Rejected-Finance L-2 | |
| 3 | L-3₹7.7 L+₹78,362 (11.3%)Rejected-Finance SHYAM COTTAGE RAM NAGAR SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | L-3 | Rejected-Finance L-3 |
Tender Value
Refer Docs
EMD Value
₹16,000
Closing Date
9 Feb 2023, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer B and R Division HPPWD Solan
near new bus stand byepass road solan
SH Providing and laying roof truss, repair of doors, windows and plastering work etc
2023_PWD_67879_1
ARMO sub cente building at Dharja
Open Tender
Civil Works
Item Rate
60 days
Solan
Please refer Tender documents.
8 documents required · 8 mandatory
₹350
₹16,000
20 Jul 2024
2 Feb 2023
9 Feb 2023
2 Feb 2023
9 Feb 2023
2 Feb 2023
Amount
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material with in all lead as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material with in all lead as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
Dismantling doors, windows and clerestory windows, (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc.Not exceeding 3 sq.m in area complete and stacking them within 50 metres lead. as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.
Repairs to plaster in patches of 2.50 sqm. (two point five zero square meter ) and under and 10 to 15mm (ten to fifteen millimeter) thick with cement mortatr 1:4 (one cement is to four sand) including cutting the patches in proper shape and re-plastering the surface of the wall including disposal of rubbish to the dumping ground within all lead as per direction of Engineer-in-Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) as per drawing, HP.PWD. specification 1 including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position in Sal wood wood as per H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.
Providing and fixing Second class teak wood 35 mm thick shutters panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately as per HP.PWD specification including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
Providing and fixing Second class teak wood wire gauge shutters using galvanized mild steel wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 for door, windows and clear story windows with hinges and necessary screws 35mm (thirty five millimeter) thick second class teak wood as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.
Providing 40x5mm (forty into five milimeters) flat iron hold fast 40cm.(forty centimeters) Long including fixing to frame with 10mm (ten milimeters) diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. (thirty into ten into fifteen centimeters) 1:3:6 ( one cement isto three sand isto six graded stone aggregate 20mm (twenty milimeters) nominal size) as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.
Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than gradeAC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.complete as per direction of Engineer in Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
150x10 mm size ( One hundred fifty into ten millimeter)
200*10 mm size (two hundred into ten millimeter)
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.
125mm (One hundred twenty five) millimeters size.
100mm ((One hundred only) milimeters size.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster(RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating fixing with prepainted iron J or L hooks, bolts and nuts 6mm diametre with prepainted limpet and rubber washers complete with all accessories as per H.P.PWD. Specification including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.
Providing and fixing M.S. BP sheet 1.66 mm (one poine sixty six millimeter ) to 2 mm (two millimeter) thick in eaves board/facia/soffits ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (base members of steel work shall be measured and paid for separately) work as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.
Providing and fixing valley 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges and as per H.P.PWD. Specification including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.
Providing and fixing on wall face PVC (D-Plast) rain water pipes 100mm (One hundred millimeters) dia pipe of working pressure not less than 4.5 (Four point Five) kg/sqm. Including filling the joints with approved adhesive complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.
Providing and fixing on wall faces PVC (D-Plast) 100 mm (one hundred millimeter) accessories for rain water pipes including filling the joints with approved adhesive complete as per drawing, HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
Providing and fixing clamps and M.S. stays including bolts and nuts for 100 mm (one hundred millimeter) dia pipe as per drawing, HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
Providing and fixing M S Plain grills of required pattern in windows etc. with M S flats 20*5mm (twenty into five milimeters) and 8*8 mm (eight into eight milimeters) square bars with screws etc. as per HPPWD specification including carriage of all equipments and labour to various locations through all modes of transportation in all leads and lifts as per direction of engineer in charge.
Applying priming coat with ready mixed paint brushing with primer pink over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting as per HPPWD specification including carriage of material thrtough all modes of transport including all incidentals in all leads and lifts and as per direction of Engineer in Charge.
Painting two coats with enamel paint other than white (excluding priming coat) on new wood and wood based surface with ready mixed paint, brushing to give an even shade including cleaning all dirt, dust and other foreign matter, sand papering and stopping as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges and as per direction of engineer in charge.
Painting one coat (excluding priming coat) on previously painted steel and other metal sufaces with white ready mixed paint brushing to give an even shade including cleaning the surface of all dirt, dust particles, other foreign matter and sand paperingas per HPPWD specification 1990 ( one thousand nine hundred ninety ) volume-1 including carriage of material thrtough all modes of transport including all incidentals in all leads and lifts and as per direction of Engineer in Charge.
Painting two coats (excluding priming coat on new steel and other metal surfaces withReady mixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand papering as required & as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.
Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome as per direction of the Engineer-in-Charge. as per drawing, HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per direction of Engineer in Charge and as per HP.PWD. Specification including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.
Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated on crete / stone / plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including carriage of materials within all leads and lifts.
Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete as per HP.PWD. Specification 1including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts.
Painting one coat (excluding priming coat) on previously painted steel and other metal sufaces with white ready mixed paint brushing to give an even shade including cleaning the surface of all dirt, dust particles, other foreign matter and sand paperingas per HPPWD specification including carriage of material thrtough all modes of transport including all incidentals in all leads and lifts and as per direction of Engineer in Charge.
kunal sahni
Hem Raj
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .