CONST. WORK OF MEETING HALL AT MAA RAJRAJESHWARI ASHRAM LOCATED AT WARD NO. 33 CHINTAMANI ROAD

IN CEMENT MORTAR

ALL KINDS OF SOIL

CRUSHER STONE DUST

CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE

THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE)

"FOUNDATIONS, FOOTINGS, BASES OF COLUMNS, ETC. FOR MASS CONCRETE."

"COLUMNS, PILLARS, PIERS, ABUTMENTS, POSTS AND STRUTS."

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

"FILLING BY AVAILABLE EXCAVATED EARTH (EXCLUDING ROCK) IN TRENCHES, PLINTH, SIDES OF FOUNDATIONS ETC. IN LAYERS NOT EXCE

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

CEMENT MORTAR 1:6 (1 CEMENT : 6 COARSE SAND)

1:4 (1 CEMENT: 4 SAND)

KOTA STONE 25MM THICK FLOORING OVER 20 MM (AVERAGE) THICK BASE LAID OVER AND JOINTED WITH GREY CEMENT SLURRY MIXED WITH

AREA OF SLAB UPTO 0.50 SQM

"PROVIDING AND FIXING M.S. TUBULAR FRAMES FOR DOORS, WINDOWS, VENTILATORS AND CUPBOARD WITH ANY SECTION MADE OF 1.60MM O

POLYESTER POWDER COATED ALUMINIUM (MINIMUM THICKNESS OF POLYESTER POWDER COATING 50 MICRON)

POLYESTER POWDER COATED ALUMINIUM (MINIMUM THICKNESS OF POLYESTER POWDER COATING 50 MICRON)

WITH FLOAT GLASS PANES OF 4.0 MM THICKNESS

"PRE-LAMINATED PARTICLE BOARD WITH DECORATIVE LAMINATION ON BOTH SIDES."

FILLING THE GAP IN BETWEEN ALUMINIUM FRAME & ADJACENT RCC/ BRICK/ STONE WORK BY PROVIDING WEATHER SILICON SEALANT OVER B

PROVIDING AND FIXING 100MM BRASS LOCKS (BEST MAKE OF APPROVED QUALITY) FOR ALUMINIUM DOORS INCLUDING NECESSARY CUTTING A

WITH 2ND CLASS TEAK WOOD BEADING 62X19 MM.

FIXED TO OPENINGS /WOODEN FRAMES WITH RAWL PLUGS SCREWS ETC.

TWIN RUBBER STOPPER

PROVIDING AND FIXING CHICKEN MESH AS PER ISI SPECIFICATION AND IN THE REQUIRED WIDTH WITH 50MM LONG BOMBAY NAILS ON VERT

IN FLOORING ON A BED OF 10 MM THICK MORTAR 1:4 (1 ACID PROOF CEMENT : 4 COARSE SAND).

"PROVIDING AND APPLYING 1.0 MM THICK WHITE CEMENT BASED WALL PUTTY OF BEST QUALITY, OVER PLASTERED SURFACE TO PREPARE TH

NEW WORK (TWO OR MORE COAT APPLIED @ 1.67 LTR/10 SQM OVER AND INCLUDING PRIMING COAT OF EXTERIOR PRIMER APPL

PAINTING STEEL WORK WITH DELUXE MULTI SURFACE PAINT TO GIVE AN EVEN SHADE. TWO OR MORE COAT APPLIED @0.90 LTR/

20 MM NOMINAL OUTER DIA .PIPES.

32 MM NOMINAL OUTER DIA .PIPES.

"WHITE VITREOUS CHINA DUAL PURPOSE WC PAN WITH WHITE SOLID PLASTIC SEAT AND LID WITH WHITE VITREOUS CHINA FLUSHING CISTE

"WHITE VITREOUS CHINA FLAT BACK WASH BASIN SIZE 550X400 MM WITH SINGLE 15 MM C.P. BRASS PILLAR TAP."

ORISSA PATTERN W.C. PAN OF SIZE 580X440 MM

"WHITE VITREOUS CHINA SURGEON TYPE WASH BASIN OF SIZE 660X460 MM WITH A PAIR OF 15 MM C.P. BRAS

"C.P.BRASS FITTING PROVIDING AND FIXING C.P. BRASS BIB COCK OF APPROVED QUALITY CONFORMING TO IS:8931 - 15 MM NOMINAL BO

PROVIDING AND FIXING C.P. BRASS STOP COCK (CONCEALED) OF STANDARD DESIGN AND OF APPROVED MAKE CONFORMING TO IS:8931. - 1

"PROVIDING AND PLACING ON TERRACE AT ALL FLOOR POLYETHYLENE WATER STORAGE TANK ISI : 12701 MARKED WITH COVER AND SUITABL

"PROVIDING AND LAYING 60MM THICK FACTORY MADE CEMENT CONCRETE INTERLOCKING PAVER BLOCK OF M-30 GRADE REFLECTIVE TYPE RUB

CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE

NOS OF BAG@410 KG OR 8.2BAGS PER CUM

PROVIDING PLASTER DRIP COURSE/ GROOVE IN PLASTERED SURFACE OR MOULDING TO R.C.C. PROJECTIONS.

"EXTRA FOR PROVIDING AND PLACING IN POSITION 2 NOS. 8MM DIA. M.S. / HYSD BARS AT EVERY THIRD COURSE OF HALF BRICK MASONR

160 MM DIAMETER OD

"EXTRA FOR PROVIDING LIPPING WITH 2ND CLASS TEAK WOOD BATTENS 25 MM MINIMUM DEPTH ON ALL EDGES OF SHUTTERS (OVER ALL ARE

PROVIDING AND FIXING FACTORY MADE DOOR FRAME (SINGLE REBATE) MADE OF SOLID PVC FOAM PROFILE WITH HOMOGENOUS FINE CELLULA

"PROVIDING AND FIXING 28 MM THICK DOOR SHUTTER MADE OF SOLID PVC FOAM PROFILE WITH HOMOGENOUS FINE CELLULAR STRUCTURE HA

110MM DIA

100 MM INLET AND 75 MM OUTLET

110MM DIAMETER

110 MM BEND

DARK SHADE USING ORDINARY CEMENT.

LIGHT POINT/FAN POINTS. SHORT POINT

LIGHT POINT/FAN POINTS. MEDIUM POINT

LIGHT POINT/FAN POINTS. LONG POINT

"POINT WIRING INCLUDING METALLIC SWITCH BOX, SHEET, SWITCHE, SOCKET FOR 3 PIN 6 AMP. SOCKET OUTLET POINT WITH 1.5 SQ. MM

ON SEPARATE BOARD SHORT POINT

ON SEPARATE BOARD MEDIUM POINT

ON SEPARATE BOARD LONG POINT

ON SEPARATE BOARD. EXTRA LONG -I

ON SEPARATE BOARD EXTRA LONG -II

ON SEPARATE BOARD EXTRA LONG -III

3 X 2.5 SQ MM

3 X 4.00 SQ MM

6.0 SQ MM CABLE IN 25 MM CONDUIT

10.0 SQ MM CABLE IN 25 MM CONDUIT

6 AMP TO 32 AMP RATING

FOR 40 AMPS. RATING ONLY. DOUBLE POLE (DP)

50 AMP TO 63 AMP RATING FOR TRIPLE POLE & NEUTRAL(TPN)

16 WAY DOUBLE DOOR

4 WAY DOUBLE DOOR

"FIXING OF MCB /MCCB ISOLATOR TP /TPN/FP IN SHEET STEEL ENCLOSURE AS REQUIRED AS PER ACCEPTED PRACTICE, INCLUDING MOUNTI

"FOR S.NO :- 8.5(6) & 8.5(7), 8.6(6) TO 8.6(7), 8.7(2) TO 8.7(3) & 8.8(1) TO 8.8(3)"

CEILING FAN (ENERGY SAVER 50 W)-1200 MM SWEEP

1 X 40/36 WATT

T - 5 LAMP 1 X 28 WATT

"SUPPLYING AND FIXING DOWN ROD OF MS PIPE FOR CEILING FAN INCLUDING THREADING, PAINTING, MAKING HOLES ETC. AS REQUIRED C

"EARTHING WITH COPPER EARTH PLATE 600MM X 600MM X 3MM THICK INCLUDING ACCESSORIES AND PROVIDING MASONARY ENCLOSER IN CEM

"ADD EXTRA FOR USING SALT AND CHARCOAL / COKE FOR G.I. PLATE OR COPPER PLATE EARTH ELECTRODE AS REQUIRED INCLUDING EXCAV

"LED LUMINIARE 1' X 1', 24W , 4-6.5K"

LIGHT POINT/FAN POINTS.SHORT POINT

LIGHT POINT/FAN POINTS.MEDIUM POINT

LIGHT POINT/FAN POINTS.LONG POINT

"POINT WIRING INCLUDING METALLIC SWITCH BOX, SHEET, SWITCHE, SOCKET FOR 3 PIN 6 AMP. SOCKET OUTLET POINT WITH 1.5 SQ. MM

ON SEPARATE BOARDMEDIUM POINT

ON SEPARATE BOARD LONG POINT

ON SEPARATE BOARD EXTRA LONG -I

ON SEPARATE BOARD EXTRA LONG -II

ON SEPARATE BOARD EXTRA LONG -III

CIRCUIT WIRING 2X2.5 SQ.MM.