REPAIR MAINT OF ROAD AT EQPT PARK GUN PARK AREA JCO MESS DEPO BTY OF ARMY AD CENTRE UNDER GE I GOS

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in areas not exc 400 sqm and not exc. 50 mm deep and not exc 150 mm deep complete all as specified

M&L 150 mm thick (compacted thickness) of WBM laid in two equal layers of each layer 75 mm th. compacted thickness in WBM with granite, trap or Basalt type coarse aggregates of grading 2 ( 63 to 40 mm size), spread,rolled and including consolidated with power roller 8 to 10 Ton after sprinkling water to required gradient and camber complete all as specified.

M&L Preparing Unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.

M&L for applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre of paving bitumen (VG-10) complete all as specified and directed.

M&L for premixed bituminous macadam with 4% binder paving bitumen (VG-30) content by wt. of total mix laid/ rolled and compacted to required gradient and camber consolidated thickness 75 mm thickness or less, and rolled with power roller 8 to 10 Ton complete all as specified and directed

M&L for Preparing existing blacktop surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.complete all as specified and directed.

M&L for applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre of paving bitumen (VG-10) complete all as specified and directed.

M&L for laying bituminous premix asphaltic dense concrete with 5.5% binder content 40mm consolidated thickness by weight of total mix, rolled and compacted to required camber and gradient complete using paving bitumen (VG-30) any penetration (SDAC shall be laid with mechanical paver and rolled with 8-10 Ton tandom power roller) complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

S&F in repair Solar cat eyes/road studs size (mm) 125L x 125B x 25H including stem height 53mm approx housing dia cast aluminium (grade LM-6) fully water proof and weather proof and weatherproof coating visible distance upto 400mtr LED-6 super bright amber led (3 Nos each side) yellow charged, flush frequency 1.2 Hz-1.8Hz including solar panel 3.5V/110MA & battery one PC sub ‘C’ type Ni-Cd rechargeable battery 1.2V/2.5AH temp range 20C to 70C fixed on road for roadway sign complete as per manufacturer’s instruction and directed by Engr-in-Charge Make- 3M/Avery Dennision/Dark Eye/Green/Greenlite/Road Star Cat Part No. GSR-909 or Equivalent.

M&L for preparation of new/old surface of road and applying 1.0 mm thick and 100 mm wide reflective resign thermoplastic paint glossy finish as required by hot application of approved colour/make complete all as specified and directed.

S&F in repair ABS Body encased, 100 cm outdoor convex mirror fixed in road/ground portion complete including hanging/fixing arrangement with adequate mounting arrangement at suitable height including 3.0mtr long and 75 mm dia MS pipe as stand fixed with ABS frame, ,including excavation for post holes, PCC Type C-2 1:3:6 (using 40 mm graded stone aggregate) in post hole & removal of surplus excavated material to a distance not exceeding 50 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point. Complete all as specified & directed.

Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Providing and laying at or below ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M/s Ats Electricals (BID ID -3194823)