Jhula and Zym

Equipments wise particular Specification

Area -12 mt. x 6 mt. Safety Area -14 mt. x 8 mt. Capacity- 20 – 25 Children Standing Pipes- 75 mm. Fibre- Slides Spiral, C-tube & Straight Slide. Deck- 5 ft. x 3 ft. Canopy –Fibre. (paint only green color)

Area -8 mt. x 6 mt. Safety Area -10 mt. x 8 mt. Standing Pipes -75 mm. Deck- Hexagonal 5 ft. Fibre -Slide Spiral and Straight. Swing- Double. Capacity – 15-20 Children (paint only green color)

Area – 5 Ft. Railings – 35 mm. pipe.

Cargo Net Material : Polypropylene Rope (Polypropylene 16MM Rope Thickness 8 Inch Mash Adult Use, H 10 x L 10 Feet, Pipe size 60mm, pipe guage 14. Cargo Net Material : Polypropylene Rope (Polypropylene 16MM Rope Thickness 8 Inch Mash Adult Use, H 15 x L 12 Feet, Pipe size 60mm, pipe guage 14.

AGE :- 5-14YRS AREA REQUIRED :- 3Mx0.5MSAFEPLAYAREA:- 3.5Mx1.5MHEIGHT:-3Mx1M ROTO SEAT:-roatation molded seats of thickness 60mm are used in these see saw it has beenprovided with bolts to fix it too see saw framewhich has a plates welded on the frame Handle has been provide don the frame made up of 20NB pipe and also conforming tost and ardsmain frame :-Frame of standard see saw is designed using 75OD& 58OD ms pipe . verticdle stand ismade upo58OD gi pipe and both pipe shouldattached byplates plates has been welded atplaces were seathas to be installed so that seatscan be fixed to therame with suitable bolting arrangement .euipmentolour shoul bne powder coated only spray colour not allowed

AGE:- 3-12YRS AREAREQUIRED:-1.8M SAFEPLAYAREA:- 3.5Mx1.5MHEIGHT:-1.21M FRP FOUR SEARTER MGR centre pipe should be of 50NB and all supor ting pipe should beo 0f25NB and15N BGipipe. Mgrn should have4 no.ofducks with multi colour .MRG should have bearing system toroatere it . the foundation system of mgr should connected with flench to the main pipe of mgr.equipment colour should be powder coated only.spray colour not allowed .

AGE:- 3-12YRS AREAREQUIRED:-1.8M SAFEPLAYAREA:- 3.5Mx1.5MHEIGHT:-1.21M StandingMGRcentrepipeshouldbeof 50NB and all suporting pipe should beo0f25NBand15NB Gipipe. Mgrn should have 4 no.of ducks with multicolour .MRG should have bearing system toroatere it . the foundation system of mgr shouldconnected with flench to the main pipe of mgr.equipment colour should be powder coated only.spray colour not allowed .

AGE:-5-14YRS AREA REQUIRED :- 3Mx0.5MSAFEPLAYAREA:- 3.5Mx1.5MHEIGHT:3Mx1M double swing vertic almain pipe should bemadeof48O D and supporting pipe should be of 25OD gipipe . Swing top pipe should be made up o f 58ODms pipe having length 2950mm welded at its oneends to be bolted swing . special swing clamsp made up of two parts arejoined together with M6 allen bolts along with shook & aspecially desigmed swingpin.Theshooki specially designed tohousea bearing for smooth& bnoise less swinign . the clamps are made frominhection molding nylone 6 plastic. chain used inswing should rubber coated and rubber seat belt should beused to have seat and enhoythe swing

A GE :- 3-14YRS AREAREQUIRED:- 3.6Mx2.9MSAFEPLAY AREA:- 5.1Mx4.4MHEIGHT:-1.2M In this innovatine product,the wave part is made from fiber glass reinforced plastic it amirrorimag e .Thethickness ofthe wave slideis 4- 5mmthick.Thecentre support of the slide is od 58 OD ms pipeshould be powder coated .The support structure of the slide is made upof25NBpipe.the ladder should be made of 25NB powder coated Gi pipe andplatform should be made up of 1.5X1.5 angle andsupporting pipe of 2"x in between and support forhandgrip on the platform should be made up of20nb pipe GI pipe with required bend equipmentcolour should be powder coated only spary colour notallowed

AGE:-4-12YRS PRODUCTAREA:- 5.9Mx3.8MSAFEPLAYAREA:- 7.9Mx3.8M meralsquaredeck5"htwithtitlwcanopy the squre platform is made upof16swggis heetholesare embosed on top of surface o0f platform to provide anti skid surface to children.the vertical support soft hedecka remadeup of 100NB gipipews metal brazingframen isattached at the bottom of to give extra support to thedeck . tittle canopy is attached at the top of the deckwhich is made up of LLDPE by roatational moldingprocess. Rotostraighttubeslide5"ht the straight tube slide is made up by bi-axial roationalmolding process with the wall thickness of 5mm with uvstabilized LLDPE meteial which gives it a attaractive look this slide is designed as per astm & enstandard swhichare globly accepted standardas. Rotosprialslide5"htwithslideentry: the slid e is completely made up of one peice eith athickness of 8mm kepingin considerde dtheastm & ENstand arded and also the meterial is mixed with uvstabilized food grade to make uv resistent . matelladderismadeupof16swggisheetholesareembhosse d on top surface of platform to provedeantidkid surfacetochildrenthestepsarespeciallydesigned

Our range of Plastic slides are of a very high quality and we think it is far better than the majority of plastic slides currently available. Available Sizes to Suit Deck Heights: 600mm, 900mm, 1200mm and 1500mm, in a range of colours, comes complete with both ground anchor and top fixing kit.

• PRODUCT DIMENSIONS: - 1760mm (Length) x 1140mm (Width) x 660mm (Height). • SAFE WORKOUT AREA: - 2500mm (Length) x 1600mm (Width). • The Sit up Board double made from "C" Class GI pipe. Center column made from 100mm NB "C" classM.S. Pipe. • The main frame is of 25mm NB made from "C" Class GI pipe. FRP sheet of 3mm thickness is molded on main frame. • The remaining frame of the sit up board is of 32mm NB made from "C" class GI pipe. • The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to 70 micron thickness. • The foundation used for fixing is a structure and made from center pipe ofM.S. of 80 NB "C" class Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm • thickness and 20mm x 40mm CRC square pipes of 3mm thickness.

• DIMENSIONS: - 1840mm (Length) x 360mm (Width) x 1560mm. (Height). • SAFE AREA:- 2.8 x 1.4Mtr. • Leg Press equipment made from "C" ClassM.S. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100mm NB made from "C" ClassM.S. pipe. • The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame. • The bottom support of M.S. round plate of 0250 mm & 10mm thick. • The remaining outer frame is of 32NB made from "C" classM.S. pipe. • The foundation used for fixing is structure and made from center pipe ofM.S. of 80mm NB "C" class welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. • Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm. • 14The footrests are made from tasted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 310mm X 130mm X 3mm thick MS plate. • The frame of footrests made up of 25 NB "C" classM.S. pipe. • Closing Caps are made up of high quality Fiber reinforced Plastic material. To build structure bushes are used which are made from M . S . seamless pipe of 50mm O.D. and 5mm thickness.

• DIMENSIONS: - 1000mm (Length) x 600mm (Width) x 1400mm.(Height). • Safe Area:-1.5 x 1.3Mtr. • Surfing Board Equipment made from "C" ClassM.S. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • T h e main frame is of 80mm NB made from "C" classM.S. pipe. • The bottom support welded of M.S. plate of 0 250 mm & 10mm thickness. • The handle frame is of 25N B made from "C" classM.S. pipe. • The foundation used for fixing is a structure and made from center pipe ofM.S. of 80NB "C" class welded with M.S. round plate of 0250 mm & 10rnm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • Bushes are used 70mm Outer Diameter with 5mm thickness is used. • The footrests made from high quality fiber reinforced plastic. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • T h e pins used are made up of 035 mm SAE 8620 bright material. • The bearing used are of "6007zz" permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nut bolts are used for assembly. • T h e cerclips used for assembly is of A34. The powder coating is done with Pure Polyester powder of Ackzonoble or Berger

• DIMENSIONS: - 2000mm (Length) x 710mm (Width) x 2200mm. (Height). • SAFE AREA: - 3.0 Mtr x 1.7Mtr. • Chest press cum seated puller equipment made up of "C" ClassM.S. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100NB made up of "C" ClassM.S. pipe. • The bottom welded with support of M.S. round plate of 0250 mm & 10mm thickness. • The connecting pipes are made up from 25NB "C" classM.S. pipe. • The handle frame is made up from 32NB "C" classM.S. pipe. • To build structure bushes are used which are made from seamless pipe of 50mm O.D. and 6mm thickness as well as 50mm diameter solid bar is used • The foundation used for fixing is a structure and made from center pipe ofM.S. of 80 NB "C" class welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • Closing Caps are made up of high quality Fiber reinforced Plastic material. • Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. • The bearings used are of "6205zz" &"6203zz" permanent lubricated sealed bearing of reputed brand High tensile steel with galvanized nuts & bolts are used for assembly

Dimension – 1930mm (length) x 990 mm (width) x 1778 mm (Height) Safe Area – 2.5 Mtr. x 1.5 Mtr. TheELEPTICAL CROSS TRAINER equipment is made of form MS Pipe of different No. NB stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. The main frame is made up to combination @ 90 mm x 3 mm & 100 mm x 50 mm MS Pipe and Cr sheet (20”x12”) of 16 gauge for support & display & the supporting frame is made up of combination of @ 90 mm x 3 mm thick MS pipe & 100 mm x 50 mm MS pipe, both the main frame and supporting frame are joined together thought 100 mm x 50 mm MS pipe. The Handle frame is made up to @ 50 mm MS pipe & 35 mm MS pipe. To build structure bushes are used which are made form M.S. seamless pipe of 63 mm O.D. and 10 mm thickness. The linkage frame consist of portion, Each portion is made up of combination MS pipe (50 mm square) and MS flat (50 mm x 6 mm thick) on both the side and The foot rest (152 mm x 368 mm) is fixed out he both the ends of each portion, foot rest is made up combination of chakkar plate & flat (30.48mm) is welded on the border. The linkage frame and the handle are fixed on the 571 mm x 6 mm thick plate, the bearing shaft of 25 mm dia is fixed on the capasule hole on the ends of thick plate and convered with 70 mm & 10 mm thick plate, this cover is designed in such a way that is should cover the outer portion of the shaft and fixed by the spring lock and the high tensile stool with galvanized bolls. Same on each every linkage joint. The foundation used for fixing the one side of bottom frame is made from the combination of 12 rod and the 4 thick plate (228.6 mm & 8 mm) the rod is 760mm long and ¾” thick & at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these 12 rods are welded to together with support 35mm x 35 mm MS angle of 5 mm thickness and the adjustment is done by the nuts & the support pillars. The foundation used for fixing the supporting pillars is fixed by four T shapes C channel heavy gauge (75 mm x 35 mm ) and all the T shaped C channel are joined together with support 35 mm x 35 mm MS angle of 5 mm thickness.

Dimension – 2501mm (length) x 75 mm (width) x 2095 mm (Height) Safe Area – 2.5 Mtr. x 1.5 Mtr. The air equipment is made of form MS Pipe of different No. NB stands for nominal bore sizes i.e. internal diameter of pipe in mm. The Central main frame is made up of combination of @ 90 mm x 3 mm & 100 mm x 50 mm MS Pipe and Cr sheet (20”x12”) of 16 gauge for support & display. The pillars of main frames is made up of @ 90 mm x 3 mm thick MS Pipe. the sleeve frame is made up of 63.5 MB, this sleeve can be disassemble from main, the sleeve is supported with flat and o 63 mm MS pipe from the top and at the other end foot rest is attached with two flat (254 mm x 63 mm) The MS pipe of dia 50 mm is bended in C from to attach the main frame and pillars. The foot rest (152 mm x 365 mm) is fixed on the sleeve frame, foot rest is made up of combination of chakkar plate & flat (30.48 mm ) is welded on border. The main frame and pillars are attached with supporting pillars dia 50 mm MS pipe. For safety and supporting reasons. The foundation used for fixing the one side of bottom frame is made from the combination of 6 rod and the 2 thick plate (228.6 mm & 8 mm) the rod is 760mm long and ¾” thick & at the one end of the rod BSW threading is done for the adjustment of the level of the main frame these 6 rods are welded to together with support 35mm x 35 mm MS angle of 5 mm thickness and the adjustment is done by the nuts & the support pillars. The foundation used for fixing the supporting pillars is fixed by four T shapes C channel heavy gauge (75 mm x 35 mm ) and all the T shaped C channel are joined together with support 35 mm x 35 mm MS angle of 5 mm thickness. To build structure bushes are used which are made form M.S. seamless pipe of 63 mm O.D. and 10 mm thickness. The bearing used are ball bearing 6205 zz permanent lubricated seated bearing of reputed brand. High tensile sheet with galvanized nuts and bolls are sued for assembly. The specialized powder coating of texture color in used.

1 Mounting plate Centre Pillar 2 Hinge holding pipe 2 bending pipe Cap 3 Unshaped pipes Handles 4 Straight Pipe (No.1) Straight Pipe (No.2) Straight Pipe (No. 3) Seat Base Pipe Back seat Hinges box bracket holder 1 A Circular mourning plate of diameter 233 mm thickness 8 mm, 4 holes on this plate at 90. Degrees of which P.C.D. 17 mm hole diameter is 20 mm. 2 On circular mounting plate a center pillar is welded diameter of center pillar is 19 mm and height is 1838 mm . 3 Cap is fixed on the top of the pillar with rivets. 4 At 1528 mm vertical distance -2 hinges holding pipes are welded in opposite directions . Hinge holding pipe have clear hole for screw at 177 mm distance. Bending pipes are welded to the hinges holding pipe and the center pillar to provide Mechanical strength to the hinge holding pipe.

k. rajan industries