WELCOME MAINTENANCE TO OFFICERS MD ACCN UNDER AGE BR I OF GE GOLCONDA

Amount

M&L Preparation of old distempered surface of walls and applying one coat of oil bond distemper (washable) white or tinted all as specified and directed by Engr-In-Charge.

M&L Preparation of old distempered surface of ceiling and applying one coat of oil bond distemper (washable) white or tinted all as specified and directed by Engr-In-Charge.

Complete removal of existing treatment to wall and applying 3 mm thick Birla wall care putty including prepration of new or old surface complete and applying two coats of Oil bound distemper on wall surface over a coat of alkali resistant primer all as specified and directed by Engr-In-Charge.

M&L for preparing plastered or un-plastered old surfaces of walls and applying one coat of white wash to walls all as specified and directed by Engr-In-Charge.

M&L for preparing plastered or un-plastered old surfaces of ceiling and applying one coat of white wash to ceiling all as specified and directed by Engr-In-Charge.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-In-Charge. (White or Tinted)

M&L for preparation of old painted surfaces of Steel and Iron work of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-In-Charge. (White or Tinted)

S&F in repair vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP pillar tap, 01 Nos 32mm waste coupling and flush pipe of polyethylene of low or high density or 32mm dia PVC pipe, one pair of MS bracket, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S & F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs plastic water closet seat & cover black / white for pedestal pan , closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device.

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed.

S & F in repairs 15 mm dia Pillar taps long body fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs 15mm dia Swan neck long body CP pillar tap fancy type cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S & F in repairs 15 mm bore Bib taps, cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15 mm dia Stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

S&F in repair two way bib cock/tap 15 mm chromium plated complete fancy type all as specified and directed by Engr-In-Charge.

S & F in repairs 15mm health faucet with spray jet (hand shower) chromium plated including all fitting & fixtures complete all as specified and directed by Engr-In-Charge.

S & F in repair 125mm brass chromium plated shower rose complete all as specified and directed by Engr-In-Charge.

S&F PVC connection 15mm dia, 450mm long with brass ferrules on both ends fixed in repairs.

S&F in repair 900mm long PVC waste pipe of size 32mm as in urinal pot / WHB/Sink including all fitting of approved make complete all as specified and directed.

S&F in repair Cover/ lid for PVC water tank of any capacity complete all as specified and directed by Engr-In-Charge and directed.

S&F in repair PVC ball valve 20 mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plasic ball screwed for iron pipe and fixed (minimum weight 20 mm- 210 gms ) complete all as specified and directed.

S&F in repair 20mm bore Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed by Engr-In-Charge.

S&F in repair 25mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed by Engr-In-Charge.

S&F 500 Ltr capacity rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position including dismantling existing tank complete all as specified and directed by Engr-In-Charge.

S&F 1000 Ltr capacity rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position all as specified and directed by Engr-In-Charge including dismantling existing tank complete all as specified and directed by Engr-In-Charge.

S&F in repairs 150mm long aluminium anodised barrel tower bolt of exturded section complete all as specified and directed.

S & F in repairs 150 mm length of extruded aluminium alloy handles, fabricated type complete all as specified and directed.

S & F in repairs 300 mm length Aluminium alloy anodised sliding door bolt with hasp, staples (bolt types) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs mild steel wire type I, gate & shutter, hooks & eyes 150 mm size complete all as specified and directed.

S & F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc complete all as specified and directed.

S&F in repairs of MS curtain rod 25mm decorated type, powder coated fixed complete all as specified and directed by Engr-In-Charge.

S&F in repairs mild steel brackets for curtain rod 25mm dia , decorative type powder coated complete all as specified and directed by Engr-In-Charge.

S&F in repairs 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden frame glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed.

Demolition of hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed.

M & L for 25 mm thick PCC 1:2:4 Type B0 (using 12.50 mm graded stone aggregate) for floor finishes for laying tiles complete all as specified and directed by Engineer - in- Charge.

M&L Vitrified Ceramic tiles light shade 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc and cement screed in CM 1:6, 20mm thick and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete.

M&L Vitrified Ceramic tiles 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in skirting / dados etc and cement screed in CM 1:4, 10mm thick and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete.

M&L for non skid white ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floors etc and cement screed in CM 1:6, 15mm thick and set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles.

M&L Glazed ceramic white tiles in vertical surfaces 300x200x7mm thick and cement backing / renderiong with CM 1:4, 10mm thick and set and jointed in neat cement slurry and pointed in white cement to match complete all as specified and directed by Engr-in-Charge.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, and cement screed in CM 1:6, 15mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed by Engr-In-Charge .

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capacity of tank exc 500 & n exc 1000 ltrs.

M&L for writing letters or figures (Block, Roman, Italic or Indian) complete all as specified and directed.

Taking down cement or cement limes plaster on brick or stonewalls including racking out joints, hacking for key, scrubbing down with water etc.

M&L 15mm thick plastering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick plastering in CM 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished even and smooth without using extra cement complete all as specified and directed.

M&L 5 mm thick plastering in CM 1:3 finished even and smooth without using extra cement on brick surface of ceilings complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bond distemper over a coat of alkali-resiatant priming paint on plastered surrface all as specified and directed by Engr-In-Charge.

M & L preparation of new surfaces of walls plastered or unplastered etc and applying two coat of cement based paint paint on wall surfaces as specified and directed by Engr-In-Charge.

M & L preparation of new surfaces of walls plastered or unplastered and applying three coat of white wash on ceiling to obtain uniform surfaces including making good the surface all as specified and directed by Engr-In-Charge.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of existing stone slabs complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.

M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness.

M & L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded granite stone aggregate) as in subbase of floor complete all as specified and directed.

M&L chequered cement concrete tiles 25 cm x 25 cm x 25 mm thick with grey cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors including 20 mm thick screed bedding layer in CM 1:6 complete all as specified and directed.

S & F in repairs brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary PVC outlet pipe and coupling complete all as specified and directed.

S & F in repair stainless steel plate rack 31" X 36" X 10" made up of 1mm thick sheet (Non magnetic) complete all as specified and directed by Engineer-In-Charge.

S& F in repairs CP Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-In-Charge .

S & F in repair Toilet paper holder of vitreous china coloured fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed by Engr-In-Charge .

S&F in repair 150 mm ordinary rat tail rod pattern springs mild steel, incl roller and roller plate complete.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and n exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description n exc 1.00 sqm complete all as specified and directed.

S&F of solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing.

S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S&F Factory made flush shutters 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed by Engr-In-Charge and directed by Engineer-in-Charge.

S&F of 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc. divided in to square with plain chamfered or rounded mitered and rebated sash bars, any numbers, edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as per ISI and all as specified and directed by Engr-In-Charge in SSR Pt – I, section -8 clause 8.24 (b), Supplied and fitted to chowkats.

S&F for 150mm long aluminium anodised barrel tower bolt of exturded section

S & F for 150 mm long extruded aluminium alloy handles, fabricated type, anodised.

S&F for 100 mm long aluminium butt hinges fixed to PVC door shutter.

S&F of 100 mm long butt hinges medium weight cold rolled mild steel and fixed in complete all as pecified and as directed.

S & F for 75 mm long medium weight, cold rolled mild steel Butt hinges.

S & F for 300 mm size mild steel sliding door bolts plate type, stove enamelled, black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete.

M & L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.

S&F in stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with wooden beading and tinned tack or galvanised wire staples complete all as specified and directed by Engr-In-Charge.

S & F in repairs Door closer hydraulically regulated alluminium extruded section body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete.

S&R in repair 110 mm CP Grating complete all as specified and directed by Engr-in-Charge.

S&F GI tube 15mm dia medium graded with all fitings and fixed to wall, celing including taking up and down complete all as specified and directed by Engr-In-Charge.

S&F GI tube 20mm dia medium graded with all fitings and fixed to wall, celing including taking up and down complete all as specified and directed by Engr-In-Charge.

SAI RAM CONSTRUCTIONS

M/s D.Krishna Varma

STANDARD AGENCIES

M/S V PRATAP REDDY

M/S Veerabhadra Constructions

NAVANAND ENTERPRISES

MRK CONSTRUCTIONS