Experience with Gov. Required 5 Year (s) Boot Ankle Textile Jungle Boot Direct Moulded Pu Sole In Pairs ( 6463 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values specification Governing Specification Conforming to FDDI (FOOTWEAR DESIGN & DEVELOPMENT INSTITUTE

Experience with Gov. Required 5 Year (s) Boot Ankle Textile Jungle Boot Direct Moulded Pu Sole In Pairs ( 6463 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values specification Governing Specification Conforming to FDDI (FOOTWEAR DESIGN & DEVELOPMENT INSTITUTE

A - 10/A

Sector-24

NOIDA) Specification No. FDDI/SPEC/Jungle Boot/08:2014 (Revised)

approved by MHA vide their letter N o-U.II-98(Spec)/2012-13 -Prov dated 08/12/2014

and as per following technical requirements * SIZE Size Assorted sizes (5

6

7

8

9

10

11 & 12) as per buyer's requirements Assorted sizes (5

11 & 12) as per buyer's requirements COLOUR Colour Olive Green Olive Green 1/6 Colour of Sole and Toe Cap Black ( For all other Boots) * MATERIALS Upper Material Upper shell consist of Polyester viscose fabric

Water Repellent as an outer layer and 100 % non-woven Nylon (cambrille type) lining as an inner layer. The two fabrics shall be adhered together with flexible adhesive and polyurethane foam of 5 mm thickness. * Blend Composition of polyester viscose fabric water repellent Polyester-80% Viscose- Remainder * Binding material of Polyester blended fabric

black having blend composition of Polyester-67%

Cotton-33% & confirming to IS:15852-2009 for colour fastness to light

washing & pH value YES * Insocks Covered with cambrille type non woven material black * Thermoplastic Toe Puff and Counter Stiffner Thickness when extacted from boot shall be 1.7 mm to 1.9 mm YES * Full Chrome Leather for Toe Cap and Arch piece confirming to IS 5677-1986 for Heat resistance

Colour fastness to rubbing crocking

Solvent extractable substances

water soluble matters

Chromium contents & pH value of water soluble YES * Thickness of Full Chrome Leather for Toe Cap and Arch Piece shall be 1.2 mm to 1.8 YES * 2/6 mm Length of Nylon Laces (cm) 160 * Width of Laces (mm) 6 * Breaking Load of Laces ( 20 cm between grips ) (Test Method- IS: 1969) 750 * Mass per 10 pairs of Laces (g) 125 * Dye Fastness to Washing for Laces shall be above 4 (Test Method- IS/ISO 105-C10: 2006) (Test Condition as per table-2

Test Number- C(3)) YES * Dye Fastness to Light (Test Method- IS: 2454) for Laces shall be above 4. YES * pH Value of aqueous extract shall be 6.5 to 8.5 for Laces YES * Sewing threads Polyester Sewing thread confirming to IS 9543-1980 (Variety No- 7) * OTHER REQUIREMENTS Mass per pair for Size-8 shall be 750 to 850 gms (with increase or decrease of 50 grams for each bigger and smaller size respectively) YES * Leg height for Size-8 shall be 160 mm (with increase or decrease of 2 mm for each bigger and smaller size respectively) Yes * SOLE Sole Direct Moulded Polyurethane * Minimum thickness of sole (mm) 4 * Cleat height (mm) 2.5 * Thickness of sole when measured at forepart from outside with side wall (mm) 20 * 3/6 Thickness of sole when measured at waist from outside with side wall (mm) 16 * Thickness of sole when measured at heel from outside with side wall (mm) 35 * TEST REPORT Availability of Test Report from NABL ILAC accredited or Central Government Lab to prove conformity of products to the specification. YES YES Name of the Lab Planet Analysis Pvt Ltd * Address of The Lab Dada Nagar

Kanpur * Test Report No. PAL/17-18/1705140 * Test Report Date 17.05.2018 * Test reports to be furnished to buyer on demand

if claimed to be available Yes * ADVANCE SAMPLE Agree to provide Advance Sample(s) for buyer's approval before commencement of supply Yes Yes * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Gaurav Mahajan 190007

FTR HQ BSF KASHMIR NEAR NEW AIRPORT HUMHAMA SRINAGAR PIN 190007 6463 60