PROVISION OF CAR PARKING SHED NEAR BUILDING NO P 61, WING V AND SPECIAL REPAIRS/REPLACEMENT OF OLD STREET LIGHTS AND ALLIED ACCESSORIES BETWEEN MAIN GATE TO CHEETAH CIRCLE UNDER GE NASIK ROAD CAMP

Amount

Surface excavation nexc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil

Excavation in post holes (or similar holes) each not exc 0.5m getting out, returning, filling in and ramming earth or broken rubble mixedwith earth around, in layers not exc 25cm,watering and removing surplus soil to a distance nexc 50 m and making good surfaces in soft/loose soil

Removing excavated material nexc 50 m and depositing where directed at a level nexc 1.50m above the starting point in soft/loose soil

M&L hard core of gauge nexc 63mm, deposited, spread and levelled inlayers nexc 75mm thick, watered and rammed to a true surface of broken stone or boulder.

M&L cement concrete 1:2:4 type B-2, (40mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410-0 or Fe-310-0

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter and straight flashing, fixed with self tapping screws as specified

M&L 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) in sub base to floor.

M&Lcement concrete 1:3:6 type C-1, (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm including preperation of surfaces

M & L machine pressed precast concrete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-30 Grade laid over and including 30mm thick stone dust cushion laid dry to the profile .

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Supply, fixing and install in replacement of 7 mtr height mild steel octagonal pole top 70 mm, bottom 155 mm, surface finished: hot dip galvanised, 3 mm thikness with base plate 250x250x12 mm and GI 64 micron, M19x600 EN 8 grade foundaction bolt and 1 mtr decorative arm for light fittings complete including foundation drawing provided by OEM for foundation of pole. Note : Rate for RCC foundation as per drawing, Excavation, returning filling, 9mtr pole, foundation anchor bolts and nuts included in this item rate.

Supply, fixing and install in replacement of 7 mtr height mild steel octagonal pole top 70 mm, bottom 155 mm, surface finished: hot dip galvanised, 3 mm thikness with base plate 250x250x12 mm and GI 64 micron, M19x600 EN 8 grade foundaction bolt and fixing arrangement for flood light fittings complete including foundation drawing provided by OEM for foundation of pole. Note : Rate for RCC foundation as per drawing, Excavation, returning filling, 9mtr pole, foundation anchor bolts and nuts included in this item rate.

Supply only in replacement of Energy efficient inverter LED Street / Roadway with PDC housing luminaire, high PF, 45W, energy saving and environmental friendly long life versatile pressure die cast aluminium housing, clear toughned glass, IP 66 protection and inbuilt battery back-up, 240V, intelligent smart sensor based auto dimmable with dimming option of 100% to 30% of the rated wattage on sensing of movement/ occupancy, within 8 mtr radius, more than 110lumens/watt of Cat Part No LED SL HLSLD-ML-04-45-CWL-INV-DIMM-RTC-R of make Halonix or equivalent complete using 1.5 Sqmm, PVC insulated (Unsheathed) three core cable, 1100V grade with aluminium conductor from junction box to light fitting all as specified and directed.

Material and labour for Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and innter dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50 mm suitable for cable protection of size 2 core 10 sqmm to 3.5 core 50 sqmm cable complete all as specified and directed.

Supply, fixing and laying in trenches or fixing or passing through pipe in replacement of 1100 Volts grade heavy duty LT UG cable, 2 core 6 Sqmm, with XLPE insulated stranded Aluminium conductor served with an inner sheathing of PVC tape, Armoured with galvanised steel wire and overall sheathed including cable gland, lugs, jointing material etc, jointing, connecting, testing and commissioning all as specified and directed.

All as per Ser item No 21 here in before but 4 Core 10 Sqmm.

S & F in replacement of Energy efficient LED Flood light Luminaire, high PF, 150W, energy saving and environmental friendly long life versatile pressure die cast housing IP 66 protection, 240V of CAT part No HLFLD-ML27-150-CW-R01 of Halonix or equivalent and using 2.5 Sqmm, PVC insulated (Unsheathed) two core armoured cable, 1100V grade with aluminium conductor (Upto 1.0 RM), complete including testing & commissioning.

Supply and fixing in replacement of timelite distribution board digital time switch 32 Amp, 3 pole 230 volts cat ref TL032DB0 of IndoAsian complete including Contactor and Digital type time switch.

M/S K. K. Construction (BID ID -3095470)

Ranmale Developers (BID ID -3090499)