CONSTRUCTION OF EB,IRS,BOILER,WOOD STORAGE YARD, WATER SOFTENER PLANT, WEIGH BRIDGE AND ADDITIONAL CIVIL WORKS FOR 1 LLPD CAPACITY DAIRY PLANT THANJAVUR, THANJAVUR DISTRICT.

Amount

Earth work narrow excavation for foundatuon in all soils and sub soils and to full depth as may be directed expect hard work reuiring blasting inclusive of shorting, shuttering and bailing out water where ever necessary and depositig the surplus earth on bank with initial lead of 10m and initial lift of 2m clearing and levelling the site etc., complete as directedby the federation officers ans as per standard spcifications .

Supply and filling with M.sand for foundation and basement to required thickness and in layers of not more than 15 cm thick, watered, well rammed and consolidated etc., complete as directed by the Federation Officers and as per standard specifications.

Supplying and filling with gravel for foundation and basement to required thickness, watered, well rammed and consolidated etc., completed with standard specification and as directed by the departmental officers.

Plain Cement Concrete 1:5:10 (one part of cement, five parts of sand and ten parts of hard broken stone) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement.

Reinforced cement concete 1:1.5:3 (One cement one and half M sand and three aggricate) using machine crushed 20mm gauge hard broken granite stone jelly for all reinforced cement concrete work connected to this work excluding centering, shuttering and cost of reinforcement grills placed in positions, but including laying, vibrating curing and finishing, fixing fan clamps in RCC floors in roof slabs. works wherever necessory and bearing surfaces of wall at the sides and bottom of the slabs, beams etc. Complete complying with standard specification and has directed by the departmental officers -Below Basement

Above Basement upto 4.50m ht

Above Basement 4.50m to 9.00m ht

Supplying and erecting centering and shuttering for soffits including necessary supports and strutting upto 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) - Upto Basement Column Surface

Upto Basement Plain Surface

Upto Basement wall Surface

Above Basement Column surface 0 to 3.30m ht

Above Basement plain surface 0 to 3.30m ht

Above Basement Column surface 3.30 to 4.30m

Above Basement Column surface 4.30 to 5.30m

Above Basement plain surface 4.30 to 5.30m

Above Basement Column surface 5.30 to 6.30m

Above Basement plain surface 5.30 to 6.30m

Above Basement Column surface 6.30 to 7.30m

Above Basement plain surface 6.30 to 7.30m

Above Basement Column surface 7.30 to 8.30m

Above Basement Column surface 8.30 to 9.30m

Supplying and fabricating and placing in position ribbed Tor steel /TMT bars for all RCC works as per design given including cost of steel and binding wire in all floors etc. complete complying with standard specifications

Brick work in CM 1: 5 (one cement five sand) using II class ground moulded bricks of size 9"x 4 ½" x 3¾" including finishing, curing etc., complete complying with standard specifications. Upto Basement Height

Above basement upto 4.50m ht

Above basement upto 4.50 to 9.00m ht

Plastering with cement mortar 1:5 (one cement & five sand ) 12 mm thick in all floors including cost and conveyance of all materials to site and labour charges etc., complete as per specifications.

Plastering with cement mortar 1:5 - 20 mm thick in all floors including cost and conveyance of all materials to site and labour charges etc., complete as per specifications.

Plastering with cement mortar 1:3 - 12 mm thick in all floors including cost and conveyance of all materials to site and labour charges etc., complete as per specifications.

Supplying & erecting structural steel of various section like Joist, channel section and purlin in suitable position inclusive of all labour charges for making joints, clit angles, welding, placing in position etc., as directed by the Federation officers and as per standard specifications.

Supplying and fixing in position of Powder coated G.I roofing sheet of 0.47mm thick with necessary bolts, nuts and washers, metal screws etc. complete with standard specification and as directed by the departmental officers.

Supply and applying 1 coat of white cement, 1 coat primer, 2 coat Emulsion painting. Rate including all material, labour charges, scaffolding,all lead, lift, transportation, etc complete. (at all levels, elevations and heights.)

Supplying and Painting new iron works with two coats of best approved first quality and colour of syenthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete as directed by the departmental officials

Manufacturing supplying and fixing of Aluminium glazed door with standard specification ,standard section with door shutter partlly pre laminated bioard, plain glass with furniture fittings finishing etc. complete.

Manufacturing supplying and fixing of Powder coated Aluminium Window, with necessary fittings etc., complete as per drawings,

Manufacturing supplying and fixing of Aluminium glazed ventilator with standard specification ,standard section , plain glass with furniture fittings finishing etc. complete.

supplying,fabricating in fixing in position of MS grill with outer frame of angle cost including cutting and welding etc completed

supplying and fixing steel luvered ventilator with 0.47mm thick PPGL off white 150 GSN 550 MPA JSN sheet including screws, bolts and nuts etc complete

Supply & fixing of steel rolling shutter ( Pull and push type with ISI monogram ) of approved quality with MS laths 75mm wide and 18 gauge thick to different sizes including all accessories like sliding grooves, shafts, spring, bearings, hood & locking arrangements and grouting the sides & top assembly with walls & beams, one coat of red oxide primer etc., complete as directed by the federation officers. and as per standard specifications

Supply and paving the floor with Double charged vitrified tiles of size 600 x 600 x 8 mm laid in cement mortar 1:3, 20 mm thick and applying cement slurry etc., complete

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two M sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position of Indian make water closet of orissa pan 1st quality of size 584mm including flushing valve system with necessary pipe arrangement fixed over sand cushion and forming flooring alround etc.complete.

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Providing & fixing open uPVC SCH-80 class water pipeline of ISI mark and approved make of following diameters at all levels, including all necessary heavy duty specials and fittings of ISI mark and of approved make, fixing witharrangement viz. standard pattern holders bat clamps made out of Galvanised Steel (GI) flat carrier fixed with GI bolts in the RCC or brick masonry and GI "C" clamp fixed to secure the pipe with GI bolts / screws / washers of required shape and size so as to fit tightly on the pipes when tightened with screwed, making holes, cutting floors, making good the walls and floors etc. complete as directed - for providing and laying 32mm dia uPVC Pipeline.

supplying and fixing 110mm dia PVC pipe line 6kg/cm with specials.

supplying and fixing 20mm dia PVC pipe line 10kg/cm with specials.

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Ground Mould Bricks of size 9" x 4 1/2" x 3" with Plastering with Cement Mortar 1:3 [One Cement and Three Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three Sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.0.45m x 0.45 m

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter and should have provision to fix aldrops, tower bolt hinges and lock plates inclusive of cost of all materials etc complete complying with thew standard specifications.(sor p.no:49, S.No:2828)

Labour charges for plastering Groove making for column,beam and wall joint plastering area with cement slurry edge finishing

supplying and laying of 300 mm dia RCC hume pipe - NP2 etc complete

Providing rain water harvesting arrangement .Including filling materials of 40mm brick jelly,40mm HBGS and M-Sand including all charges etc,..completed

supplying and laying of 20mm thick Acid alkaline tilewith base cement mortar 1:3 30 mm thick, Epoxy grouting 3mm and top finishing etc complete

supplying and laying 30 mm thick granite stone slab with base cement mortar 1:3 30mm thick, cement grouting and pointing etc complete

UPVC Ventilator Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (Black colour ) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) windows of casement type (Open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM nd 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should welded and cleaned. Radiations free pin heade plain or borwn colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work etc. ,Complete complying with standard specification and as directed by the departmental officers.

providing pre constructional anti termite and creating a chemical barrier to the building by injecting chemical emulsion of required concentration over the top of plinth filling, junction of wall and floor side walls of foundation etc complete

supplying and fixing in position of poly carbonate sheet of 2.00mm thick with all necessary fixtures etc complete.

supplying and fixing turbo ventilator 0.60m diameter with poly corbonate base profile including cost and conveyance of all charges.etc complete

Supplying, fabricating and erecting the specialy designed Steel sructure using Fusion welding quality steel conforming to IS:2062 (Column & Truss) erecting over the RC Column at Elevation Level +5.00m Height with a Span of 42m. For Steel Column using with Outer/Flange.-250mmx12mm, Inner/Flange. - 250mmx12mm, Web - 600mm/1000mmx8mm thick. and Truss made with Outer/Flange. - 250mmx12mm, Inner/Flange. - 250mmx12mm, Web-600mm/1000mmx6mm thick, stiffener plate of size 75mm x 8mm @1500mm spacing and necessary base plate and connecting plate 20mm thick including bed bolt 1500mm x 32mm, labour charges for lifting and erecting at 13.90m height at Ridge level, cutting, drilling holes, welding and fixing of members with necessary bolts, nuts, anchor bolt of approved quality hoisting aligning and glazing the trusses in position as per the drawing. The rate should included the cost one coat of zinc chromate primer and necessary Scaffolding charges at required height etc., complete complying with standard specifications.

supplying and fixing of 300mm dia ss Amul trap with necessary fittings etc complete.

supplying,laying and joining of 150mm dia upvc pipe line with necessary fittings etc complete.

Supply and fixing of 4 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board (with MCCB incomer) with double door (metal door) with 1 no. 125A 4P MCCB switch as incoming and 2 Nos.32A 3P MCB, 6 Nos. 6A to 32A SP MCB as outgoing with suitable cable end box in flush with wall with IP 42 protection with earth connection only (Make: Legrand/ Havells / L&T)

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board (with MCCB incomer) with double door (metal door) with 1 no. 160A 4P MCCB switch as incoming and 2 Nos. 32A 3P MCB, 18 Nos. 6A to 32A SP MCB as outgoing with suitable cable end box in flush with wall with IP 42 protection with earth connection only (Make : Legrand/ Havells / L&T)

Supply and fixing of 12 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board (with MCCB incomer) with double door (metal door) with 1 no. 200A 4P MCCB switch as incoming and 2 Nos. 32A 3P MCB, 20 Nos. 63A SP MCB as outgoing with suitable cable end box in flush with wall with IP 42 protection with earth connection only (Make : Legrand/ Havells / L&T)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No. 40A DP MCB Isolator as incoming and 6 Nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. (Make: Legrand/ Havells /L&T)

Supply and fixing of 9W LED bulb for BH point.(like Havells / Philips / Crompton / Equivalent make)

Supply and fixing of 120W LED Flood light (Higher end) with integrated driver with suitable AI frame work on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting (Make: Havells/Philips/ Crompton)

Supply and fixing of 200W LED Flood light (Higher end) with integrated driver with suitable AI frame work on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting (Make: Havells/ Philips/Crompton)

Supply and Fixing of 32A 4 pole MCB in 4 way MCB enclosure on wall with earth connection. The MCB enclosure and MCB's should be with the ISI mark (Make:Legrand /Havells)

Supply and Fixing of 32A 2 pole MCB in 2 way MCB enclosure on wall with earth connection. The MCB enclosure and MCB's should be with the ISI mark (Make:Legrand /Havells)

Supply and Run of 4 of 4.0 Sq. mm (56 / 0.3) PVC insulated SC unsheathed FRLS copper wire of 1100 V Grade in suitable PVC rigid pipe (ISI) in concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour

Supply and Run of 4 of 6.0 Sq.mm (84/0.3) PVC insulated SC unsheathed FRLS copper wire of 1100V Grade in suitable PVC rigid pipe (ISI) in concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with suitable colour

Supply and Run of 4 of 10.0 Sq.mm (140/0.3) PVC insulated SC unsheathed FRLS copper wire of 1100V Grade in suitable PVC rigid pipe in concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with suitable colour

Supply & Fixing of AC / DC 76mm buzzer / call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable TW Board with push switch.

Gst (Note: The Tenderer should quote the amount towards goods and service tax (GST) in the appropriate column in terms of percentage 18% If not quoted it will be considered that the rate quoted is inclusive of GST)