REPAIR MAINT AND IMPROVEMENT OF LT OH LINE/LT UNDERGROUND CABLE INCLUDING SERVICE CONNECTING WORKS UNDER GE (E) MATHURA

Amount

Excavating in trenches for laying under ground cable, in and stays in any type of soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and directed by Engr–in–charge.

Excavating in trenches for laying under ground cable, in soft rock viz PCC hardstanding /Bituminous road not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and directed by Engr–in–charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr in charge.

Removing surplus excavated material to a distance not exceeding 50 meter and depositing at a level not exceeding 1.50 meter above the starting point complete all as directed.

M&L for sand cushioning to under ground cable in trenches in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note:- Measurement shall be taken after gentling puning of sand.

Material and labour for Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks laid dry flat complete all as specified and directed by Engr in charge.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches / pipes, fixed to poles / walls, fixing with suitable saddle/clamps complete all as directed including taking out the old burnt out cables all as directed of following sizes:-

10 sqmm 2 core.

16 Sqmm 4 core.

25 Sqmm 3.5 core.

35 Sqmm 3.5 core.

50 Sqmm 3.5 core.

70 Sqmm 3.5 core.

95 Sqmm 3.5 core.

120 Sqmm 3.5 core.

185 Sqmm 3.5 core.

240 Sqmm 3.5 core.

300 Sqmm 3.5 core.

Dismantling unserviceable MCCB from LT panel including disconnection of incoming and outgoing electric connections and S&F DPX 630 Thermal magnetic release MCCB 4 pole 415 Volts, of rating 630 Amp, 70KA and connecting with existing system commissioning & testing complete. Make :- Legrand /Schneider/havells/C&S

Dismantling unserviceable MCCB from LT panel including disconnection of incoming and outgoing electric connections and S&F DPX 400 Thermal magnetic release MCCB 4 pole 415 Volts, of rating 400 Amp, 50KA and connecting with existing system commissioning & testing complete. Make :- Legrand /Schneider/havells/C&S

Dismantling unserviceable MCCB from LT panel including disconnection of incoming and outgoing electric connections and S&F DPX 250 Thermal magnetic release MCCB 4 pole 415 Volts, of rating 250 Amp, 25KA and connecting with existing system commissioning & testing complete. Make Legrand /Schneider/havells/C&S.

Dismantling unserviceable MCCB from LT panel including disconnection of incoming and outgoing electric connections and S&F DPX 100 Thermal magnetic release MCCB 4 pole 415 Volts, of rating 100 Amp, 25KA and connecting with existing system commissioning & testing complete all as specified and directed. Make :- Legrand /Schneider/havells/C&S

Dismantling unserviceable MCCB from LT panel including disconnection of incoming and outgoing electric connections and S&F DPX 200 Thermal magnetic release MCCB 4pole 415 Volts, of rating 200 Amp, 25KA and connecting with existing system commissioning & testing complete. Make :- Legrand /Schneider/havells/C&S.

Dismantling unserviceable MCCB from LT panel including disconnection of incoming and outgoing electric connections and S&F DPX 160 Thermal magnetic release MCCB 4 pole 415 Volts, of rating 160 Amp, 25KA and connecting with existing system commissioning & testing complete. Make :- Legrand/ Schneider/ Havells / C&S

Dismantling unserviceable MCCB from LT panel including disconnection of incoming and outgoing electric connections and S&F DPX 63 Thermal magnetic release MCCB 4pole 415 Volts, of rating 63 Amp, 25KA and connecting with existing system commissioning & testing complete all as specified and directed. Make :- Legrand /Schneider/havells/C&S

Dismantaling of old cracked/unserviceable PCC poles/struts any type and size.

M&L in replecement Steel tubular swaged pole 9.00 m long type 410 SP-31 (Appx wt 147 Kg) with cast iron or MS base plate, finial taper plug, bolts, nuts & screws conforming to IS-2713 (Part I to III) of 1980 comprising of following:- (a). Excavation in post holes in any type of soil not exceeding 0.5 cum each, getting out, returning filling in and well ramming earth in layers not exceeding 25 cm watering and disposal of surplus soil to a distance not exceeding 50 m and making good surface. (b) PCC M-7.5 grade (Nominal mix) using 40 mm graded stone aggregate in base (0.90m x 0.60m x 0.15m height)in foundation filling as lean concrete. (c) PCC M-10 grade (Nominal mix) using 40 mm graded stone aggregate in foundation filling (0.60m x 0.60m x 1.5m height). (d) PCC M-15 grade (Nominal mix) using 20 mm graded stone aggregate as in coping (0.45m x 0.60m 0.45m height). (e) M&L for applying two coats of aluminum paint over a coat of red oxide primer and making alternate colour bands of black & yellow colours in 30 cm width upto a height of 1.5 mtr from pole coping with synthetic enamelled paint complete.

M&L for GI stay assembly set comprising of 14 mm dia 400 mm iron stay bow, 2150 mm long stay rod 16 mm dia stay plate 300 mm x 300 mm x 6 mm thimble, GI stay wire 7/8 SWG of required length, MS clamp, porcelain loop insulator of size 90 x 140 mm with hole clearance 25.5 mm, excavation (0.60 m x 0.90 m x 1.2 m), PCC M-10 grade (Nominal mix) using 40 mm graded stone aggregate in foundation (0.6 m x 0.9 m x 0.6 m), returning filling & disposal of earth to a distance not exceeding 50m complete.

Dismantling / taking down old unserviceable pin/loop/shackle type insulator any type / size.

Supply & fixing pin type porcelain vitreous insulator 100 mm height and 65 mm dia for 1100 Volts grade including galvanised mild steel spindle, one nut and two washers complete all as specified.

Supply and fixing shackle type insulator porcelain vitreous white,brown and green of size 75 mm heaight and 90 mm dia incl galvanised MS straps 31x3 mm size ,washers,insulator bolt 12 mm dia and nut for working pressure 1100 Volts grade complete all as specified.

Dismantling of old unserviceble Aluminium conductor off sizes from existing over head lines complete all as specified and directed by Engr-in-Charge.

Material and labour for ACSR conductors including stretching conductors of existing size and type for over head LT poles including binding at site to insulator with suitable size of binding wire etc complete all as directed.

Taking out existing binding wire from insulators of loose overhead conductors including earth wire of LT lines and restreching ACSR conductor to required sag up to the satisfaction of Engr-in-charge including re-binding the conductor with new aluminium binding wire, jumpering of any type of conductor, re-connecting of service connections, street light connections complete all as directed for following number of conductors in LT line. Note :- Necessary T&P like Ladder, rope, pulling machine, vehicle etc shall be arranged by the contractor.

Sapn of two ACSR conductor

Sapn of four ACSR conductor

Sapn of five ACSR conductor

Dismantling unserviceable any size of cross arms and anti climbing devices from pole /structures. complete all as specified and directed.

M&L for work confirming to Fe-410-O or Fe-310-O as in cross arms, support, bracings, stiffeners, clamps channels fabricated from structural steel including nuts, bolts and washers welding, bending cold or hot drilling holes for bolts in any shape or size all as directed including two coats of aluminium paint over a coating of red oxide primer all as directed by Engr-In-Charge.

M&L for scraping, scretching, cleaning the old paint, preparation of the surface for repainting. Painting LT Pole 09 Mtr long steel tubular pole with two coats of aluminium paint and writing pole Nos. including applying one coat of cement base paint on PCC muff all as directed by Engr-in-Charge.

M&L for scraping, scretching, cleaning the old paint, preparation of the surface for repainting. Painting LT 9 Mtr long PCC pole in Black & White strip 30 Cm a part alternaterly up to 1.5Mtr height from ground level with synthetic enmel paint, writing pole Nos. & applying one coat of cement base paint on PCC muff & remaining portion of the pole all as directed by Engr-in-Charge.

Cutting & trimming tree branches upto 100 mm girth of any location around existing HT/LT OH lines giving clearance of 1.5 m on all sides complete. Note :- Trimming of tree branches irrespective in numbers in each tree shall be measured as one unit.

Cutting wild grass, bushes, creaper, unwanted vegetation from inside / surrounding of E/M installations, near transformers, pole structures etc including cutting creapers from barbed / cattle fencing of the installations as when directed and removing of unwanted material from installation compound and depositing where directed. Note :- The item shall be operated maximum two times in entire period of contract in the same installations. Area measured separately each time.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws complete.

M&L for framed work as in MS sheet section, hinges, angle iron etc complete confirming to Fe-410-O or Fe 310-0 all as directed.

Supply and fixing in replacement PVC LT Line separator 2 Way to maintain distance with in over head line conductors made of polypropylene composite moulded or bolted type complete all as directed at site.

All as per item No 32 here in before but of 4 way.

M&L for laying GI Tubing light grade 40 mm dia for cable potection galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including removing the rusted old one complete all as directed.

M&L for laying GI Tubing light grade 50 mm dia for cable potection galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including removing the rusted old one complete all as directed.

M&L for laying GI Tubing light grade 80 mm dia for cable potection galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including removing the rusted old one complete all as directed.

M&L for laying HDPE pipe of pressure rating 6 Kgf/cm2 laid in trenches,/ floors or along walls/ceilings etc of size 40 mm dia all as directed.

M&L for laying HDPE pipe of pressure rating 6 Kgf/cm2 laid in trenches,/ floors or along walls/ceilings etc of size 50 mm dia all as directed.

Supply and fixing in replacement LED post top lantern with opal diffuser capacity 30 watt including fixing/ grouting on PCC platform of suitable size and taking down existing unserviceable one complete all as directed at site. Make :- C&S Cat Part No.LTGL30-24x1HPLED or equivalent in PHILIPS/Crompton.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm 2 core nominal cross section in service connections.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm 4 core nominal cross section in service connections.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sqmm 2 core nominal cross section in service connections.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sqmm 4 core nominal cross section in service connections.

Material and labour for earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI strip of size 32x6 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 40 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit), PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in earth pit including 40mm thick RCC cover with reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal mix) in pit with 40mm thick RCC cover in M-15 grade in (Nominal mix) using 40 mm graded stone aggregate in cover reinforced with 6 mm dia 100mm c/c bar both way, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.

Material and labour for glow sign boards for E/M installtions made up of retroreflective material (blue colour) fixed on stainless sheet of size 1.5 mtr x 1.0 x 3 mm including mounting arrangement with stainless steel pipe of 20 mm for board beadings and 40 mm size for vertical erection of length 2.5 mtrs including connected civil work like digging foundations, PCC etc required for vertical erection of sign board and writing the letters on sign board in white all as directed.

Material and labour for stand for fire buckets for 04 buckets duly painted in red colour complete all as directed. Make :- Hira. Cat part No-39861 or equivalent make given under list of make.

Material and labour for steel fire bucket for fire point duly painted in red colour outside complete all as directed. Make :- Hira. Cat part No-35711 or equivalent make given under list of make.

Material and labour for dry chemical powder fire extinguisher capacity 9 kg complete all as directed. Make :- Hira. Cat part No-35743 or equivalent make given under list of make.

Ms Kamal Kant Agarwal

M/s Singh Engineering Corporation

MS. BK BROTHERS AND CO