REPAIR MAINT OF STEEL TUBULAR POLE STAY ASSEMBLE AND EARTHING UNDER AGE I DARJEELING

Amount

Excavation in Trenches, not exc. 1.50 Metre wide and not exc 1.50 Metre in depth for any type of foundation/cable trench and getting out in Soft/Loose Soil, complete all as specified and as directed.

Excavation in Trenches, not exc. 1.50 Metre wide and exc 1.50 Metre in depth but not exc. 3.0m for any type of foundation/cable trench and getting out in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

M&L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be measured and paid for.

Supply & laying locally available, well burnt Sub-class ‘B’ Bricks/ Fly Ash bricks of size 250x125x75mm (± 8% tolerance), laying perpandicular to UG Cable laid in trenches over Sand Cushion as Cable Protection, complete all as specified and as directed.

Dismantling unserviceable Steel Tubular Poles of any description and any size including demolition of Cement Concrete (as/if required) and made good disturbed Ground, complete all as specified and as directed. NOTE: Unserviceable Poles will be dismantled at Ground Level and disturbed ground will made good as directed for which Earthwork, demolition of Cement Concrete, etc. will not be measured and paid separately.

Taking down/out unserviceable UG Cables of any Cross Sectional Area and Connections and joints including Pipes, Bricks, etc of any description laying in trenches or fixing with Walls/Poles, segreating serviceable Bricks/Precast covers, Pipes, Cables etc, and keep in safe custody for reuse, complete all as specified and as directed. NOTE: Earthwork will be measured and paid under appropriate Items.

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-22 (8.50 Metre long), Single Swan Neck type (Arm length 1.0M) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying two coats of Black Bituminous Paint Internally and Externally from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Painting over a coat of Red Oxide Primer (Externally from Top of Coping) including writing MES Pole No. with Synthetic Enamel Paint (First Grade/quality), complete all as specified and as directed. NOTE: Earthwork, Cement Concrete, etc. will be measured and paid under approprite Items. MAKE:- CALCUTTA POLES/ JINDAL/ NATIONAL TUBES

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-22 (8.50 Metre long), Double Swan Neck type (Both side Arm length 1.0M) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying two coats of Black Bituminous Paint Internally and Externally from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Painting over a coat of Red Oxide Primer (Externally from Top of Coping) including writing MES Pole No. with Synthetic Enamel Paint (First Grade/quality), complete all as specified and as directed. NOTE: Earthwork, Cement Concrete, etc. will be measured and paid under approprite Items. MAKE:- CALCUTTA POLES/ JINDAL/ NATIONAL TUBES

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (8.50 Metre long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying two coats of Black Bituminous Paint Internally and Externally from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Painting over a coat of Red Oxide Primer (Externally from Top of Coping) including writing MES Pole No. with Synthetic Enamel Paint (First Grade/quality), complete all as specified and as directed. NOTE: Earthwork, Cement Concrete, etc. will be measured and paid under approprite Items. MAKE:- CALCUTTA POLES/ JINDAL/ NATIONAL TUBES

Supply & laying of LT XLPE Cable, sheathed PVC insulated, screened, PVC bedded, Galvanised Steel Strip or Wire armoured, Electic Power Cable (heavy duty) with Aluminium Conductor, 1100 Volts grade, cross-sectional area 10 Sqmm 4.0 Core, laid in Pipe/ Ducts/ Trenches/ under Floor/ under Road including and Testing, complete all as specified and as directed. NOTE : Earthworks, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items. MAKE:- KEI/POLYCAB/ HAVELLS/ FINOLEX/RR KABEL

S&F in-repair of Galvanised Iron Pipe (ISI Marked) 25mm bore (dia) ‘light grade’ for protection of UG Cable, laid under Floors or Road Crossing, fixing to Pole with and including Mild Steel Clamps, Nuts, Bolts, etc., complete all as specified and as directed.

M&L for cutting existing road/hard standing not exc 50x45cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well rammaing watering finished suraface of depth not less than 12 cm from top using PCC 1:3:6, type C-2 (using 40mm graded aggregate); including removal of surplus soil complete all as specified and as directed.

M&L for Cement Concrete 1:4:8, type D-2 (40mm graded aggregate) as in foundation filling and mass concrete, etc. and finishing the Concrete surfaces Fair and Even including necessary Formwork required at Site(s), complete all as specified and as directed.

M&L Cement Concrete 1:3:6, type C-2 (40mm graded aggregate) as in Foundation of Poles, Stays, etc. including Formwork (as/if required) complete all as specified and as directed.

M&L Cement Concrete 1:2:4, type B-1 (20mm graded aggregate) as in Coping of Poles, etc. and finishing the Concrete surfaces Fair and Even including necessary Formwork required at Site(s), complete all as specified and as directed.

M&L for Rendering or Bedding Layer 10mm thick in Cement Mortar 1:3 on Walls, etc. for fixing Tiles as Skirtings, Dados, etc, complete all as specified and as directed.

M&L Glazed Ceramic Tiles 300x200x7mm thick in Vertical Surface i.e. Dado, Skirting, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.

M&L for Multistandarded Copper Conductor cable of 3 Core 1.5 Sq mm size drawn through steel tubular poles for interconnection of cable looping box to street light Fitting, Post Top Lantern & etc including taking down old unserviceable cable complete all as specified and as directed. Make :- Polycab/Plaza/Havells/KEI

S&F in-repair of Pole Box/Junction Box of size 205 X 255 X 112mm (LxBxH) made out of Polycarbonate material totally enclosed, dust and vermin proof, door pasted with rubber gasket, water tight IP 66/67 protection single leaf shutter in front having proper locking arrangements, including provision of suitable connector for single phase connections loop in and out 10 to 16 Sqmm 2.0 Core aluminium armoured cable branch out 1.5 Sqmm single core copper PC insulated cable and MCB SP 06 amps- 01 No and mounted on security light pole with suitable clamps (GI Flat iron of 25x3mm), nuts, bolts, complete all as specified and directed. Cat No.: DK 2500 G of make Hensel or quivalent of make Sintex.

M&L for taking down existing defective Security/ Street Light Fitting of any Watt/Make from pole, repairing the same by opening Cover, re-wiring the Light Fitting with 3.0 core 1.5 Sq mm Copper Conductor Cable, multi-stranded, cleaning and checking unserviceability, refixing Light Fitting in Original Position after repaired and connecting up, complete all as specified and as directed. NOTE:– 3.0 core 1.5 Sq mm Copper Conductor Cable, multi-stranded wherever required will be measured and paid under appropriate Item(s).

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 Street light fitting luminaire with high power LEDs as light source and electronic driver of capacity 70 watts with pre wired and lens embedded PC cover having Top opening seperate driver compartment and necessary mounting arrangements, including taking down old unserviceable light fitting, complete all as specified and as directed. CAT No.- ENDURACITYLINERNEOSL70WLED757PASYBOTG of Make HAVELLS or equivalent of make BAJAJ/PHILLIPS/CROMPTON GREAVES

Material and Labour for earthing complete with galvanized steel pipe electrode 40 mm bore (dia) (Medium Grade), 2.50m long, buried directly and preferably vertically in ground with top edge of plate not less than 1.25 meter below normal ground level, connected with earthing lead of 4mm dia galvanised steel earth wire all as shown in electrical plate No 4 of SSR Pt I to the earthing test point, including necessary excavation/boring in sot loose soil and disposal of soil to a distance not exceeding 50 mtr and necessary testing on completion, complete all as specified and as directed.

Janata Enterprises

HIRA SINGH

RAI CONSTRUCTION

Darjeeling Enterprises