ROHTAK TOWN CONSTRUCTION ...

Amount

Provision for providing and fixing flow meter with electronic display on delivery pipe inside pump chamber complete in all respect.

PANEL BOARD FOR MOTORS: Supply, erection, testing and commissioning of wall mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron frame work and completely powder coated of suitable size deep having following items for 1 Non clog Submersible Pumping a) Main switch suitable ampere 1 No. (LandT Siemens, ABB) b) CT 100/3 = 1 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, star delta 1 No (LandT Siemens, ABB) f) VSS 1 No. and ASS 1 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) 60 HP power Motor

`RAW WATER PUMP: Supplying, erection, testing and commissioning of Horizontal motor pumping set for Raw water having head as per the indicated requirements of discharge in LPM and power capacity in BHP as per IS marked ` 3800 LPM X 40 M X 60 BHP

WTP: Design and construction of 3.00 MLD capacity automated PLC controlled based with SCADA System water treatment plant including interconnecting DI pipe from raw water pump to inlet box of WTP, CWT and Suction Well for CW , inlet channel, Alum dozing, Flash mixing, Clari floculator, filter box, over head Reservoir for back wash including pump sets and electric control panel, waste water tank including pump sets and electric control panel, DI pipes, DI specials, manhole covers, air scour equipment, chemical house including chlorination equipment and all other civil / mechanical / electric installations complete in all respects as per DNIT (Sluice valves of make IVC/VAG) 3.00 MLD CAPACITY

PANEL BOARD FOR MOTORS: Supply, erection, testing and commissioning of wall mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron frame work and completely powder coated of suitable size deep having following items for 1 Non clog Submersible Pumping a) Main switch suitable ampere 1 No. (LandT Siemens, ABB) b) CT 100/3 = 1 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, star delta 1 No (LandT Siemens, ABB) f) VSS 1 No. and ASS 1 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) 105 HP power Motor

HT CABLE: Supply erection testing of standard make XLPE 3 core galvanized steel trip armored HT / 11 KV grade ISI marked cable with aluminum Conductor in ground covered with sand and brick in trenches complete in all respect . 35 Sqmm

HT CABLE: Supply erection testing of standard make XLPE 3 core galvanized steel trip armored HT / 11 KV grade ISI marked cable with aluminum Conductor in ground covered with sand and brick in trenchs complete in all respect . 95 Sqmm

`COPPER WIRE: Supply, erection, testing and commissioning of IS marked 3 core copper wire for various motors with underground system in PVC and flexible pipes with accessories like thimbles etc. complete in all respective. ` 70 Sqmm

`COPPER WIRE: Supply, erection, testing and commissioning of IS marked 3 core copper wire for various motors with underground system in PVC and flexible pipes with accessories like thimbles etc. complete in all respective. ` 50 Sqmm

`COPPER WIRE: Supply, erection, testing and commissioning of IS marked 3 core copper wire for various motors with underground system in PVC and flexible pipes with accessories like thimbles etc. complete in all respective. ` 25 Sqmm

`CLEAR WATER PUMP: Supplying, erection, testing and commissioning of Horizontal motor pumping set for Clear water having head as per the indicated requirements of discharge in LPM and power capacity in BHP as per IS marked ` 5600 LPM X 45 M X 105 BHP

H.T. METERING PANEL: Supply, erection, testing and commissioning of 11KV Indoor H.T Metering Panel complete with suitable CTs, PTs and 3 phase, 4 wire Digital Electronic KWH Meter with accuracy class of 0.5 as per requirement and approval of DHBVN, consisting of the Cubical Panel Box of minimum size 700mm x700mm x1500mm free standing, floor mounting type made out of 14 SWG CRCA sheet steel powder coated with epoxy coated channel iron base frame

Supply erection testing of reputed make LED light 100 watt with fittings and accessories complete in all repect. Supply and Laying of 10 sqmm aluminium cable 3.5 core underground cable 0.75 metre below ground level covered without sand and bricks including excavation and refilling of trenches complete in all respect

LED: Supply erection testing of reputed make LED light 100 wats with fittings and accessories complete in all repects.

MECHANICAL JOINTS: Supply, fixing and testing of Mechanical Joints PN 1.6 alongwith ruber gaskit and galvanized nuts / bolts complete in all respect. 200 mm i/d

MECHANICAL JOINTS: Supply, fixing and testing of Mechanical Joints PN 1.6 alongwith ruber gaskit and galvanized nuts / bolts complete in all respect. 250 mm i/d

MECHANICAL JOINTS: Supply, fixing and testing of Mechanical Joints PN 1.6 alongwith ruber gaskit and galvanized nuts / bolts complete in all respect. 300 mm i/d

`RAW WATER PUMP: Supplying, erection, testing and commissioning of Horizontal motor pumping set for Raw water having head as per the indicated requirements of discharge in LPM and power capacity in BHP as per IS marked ` 2300 LPM X 12 M X 12.50 BHP

Operation and Maintenance for complete scope of work covered under this contract as per OandM schedule mentioned in the DNIT during defect liability period of 1 year (Operation only) after successful trial run of 3 month complete in all respect.

Operation and Maintenance for complete scope of work covered under this contract as per OandM schedule mentioned in the DNIT during 1st. Year after completion of defect liability period of 1 year complete in all respect.

Operation and Maintenance for complete scope of work covered under this contract as per OandM schedule mentioned in the DNIT during 2nd. Year complete in all respect.

Operation and Maintenance for complete scope of work covered under this contract as per OandM schedule mentioned in the DNIT during 3rd. Year complete in all respect.

Operation and Maintenance for complete scope of work covered under this contract as per OandM schedule mentioned in the DNIT during 4th. Year complete in all respect.

Operation and Maintenance for complete scope of work covered under this contract as per OandM schedule mentioned in the DNIT during 5th. Year complete in all respect.

Bidder Name

Amount

Lalit Kumar(GSTN-06ALGPB5309Q1ZY)

Kulbir Singh Contractor(GSTN-06ATZPS6352H1ZW)

SUBHASH MALIK CONTRACTOR(GSTN-06ANZPS3487P1ZL)

Jaiveer Singh Contractor(GSTN-06ATQPS8420H1Z8)

kapil engineering company(GSTN-NA)

Mukesh Rathee contractor(GSTN-NA)

Kulbir Singh Contractor

Jaiveer Singh Contractor

Lalit Kumar

SUBHASH MALIK CONTRACTOR

Mukesh Rathee contractor

kapil engineering company

SUBHASH MALIK CONTRACTOR

Kulbir Singh Contractor

Mukesh Rathee contractor

Jaiveer Singh Contractor