HR Dept. Office

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of Office for HR Department over the Existing Building, BIOM, Kirandul Complex

Tender Enquiry No.: Works-Kirandul/HR Dept. Office/2812/2026/53 Dt: 24/08/2026

MSTC Ref. No.: NMDC/Kirandul/Works/9/26-27/ET/336

Name of the Bidder

Sl. NO DESCRIPTION / PRICE QUOTED FOR AMOUNT

1 Total Quoted Amount Schedule - A i/c GST

2 Total Quoted Amount Schedule - B i/c GST

3 Total Quoted Amount Schedule - C i/c GST

4 Total Quoted Amount Schedule - D i/c GST

5 Total Quoted Amount Schedule - E i/c GST

6 Total Quoted Amount Schedule - F i/c GST

7 Total Quoted Amount Schedule - G i/c GST

8 Total Quoted Amount Schedule - H i/c GST

9 TOTAL QUOTED AMOUNT INCLUDING GST

1. Free Issue Material: NIL

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of Office for HR Department over the Existing Building, BIOM, Kirandul Complex

Tender Enquiry No.: Works-Kirandul/HR Dept. Office/2812/2026/53 Dt: 24/08/2026

MSTC Ref. No.: NMDC/Kirandul/Works/9/26-27/ET/336

Name of the Bidder

Sl. NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT

SCHEDULE - A Demolishing Work

1 Demolishing cement concrete manually/by mechanical means including disposal of mateial within 50 metres leads as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) Cum. 11.28

2 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead to specified location as per direction of Engineer - in- charge. Cum. 5.45

3 Demolishing brick work/ C.C Solid Block Masoury manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead to specified location as per direction of Engineer-in-charge. nominal size). Cum. 37.04

4 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead to specified location as per direction of Engineer-in-charge. : Of area beyond 3 sq. metres Nos 1

5 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. Sqm. 345

A Total from Sl. No. (1 to 5)

B Add GST @ 18%

C Total Quoted Amount including GST (Schedule - A)

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of Office for HR Department over the Existing Building, BIOM, Kirandul Complex

Tender Enquiry No.: Works-Kirandul/HR Dept. Office/2812/2026/53 Dt: 24/08/2026

MSTC Ref. No.: NMDC/Kirandul/Works/9/26-27/ET/336

Name of the Bidder

Sl. NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT

SCHEDULE - B CIVIL WORKS

1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. All kinds of soil. Cum 100

2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. Cum 60

3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). Cum. 1.5

4 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20 mm nominal size) Cum. 1

5 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) Cum. 36.5

6 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). Cum. 262

7 Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete Sqm 35

8 Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts Sqm. 440

9 Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm. 1074

10 Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform Sqm. 1165

11 Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral-staircases Sqm. 85

12 Centering and shuttering including strutting, propping etc. and removal of form for : Weather shade, Chajjas, corbels etc., including edges Sqm. 60

13 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 29950

14 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. Cum 157.5

15 Carriage of material by Mechanical Transportation including loading, unloading and stacking or levelling complete as directed by Engineer-in-charge. P 16

a Earth, Lead up to 1.0. Km Cum 1.75

b Earth, Lead up to 2.0. Kms Cum 0.38

c Earth, Lead up to 3.0. Kms Cum 0.38

16 Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry with 200 mm thick with Grade-I AAC blocks of density 551 to 650 kg/ cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately). Cum 136

17 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) Sqm 616

18 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) Sqm 759

19 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) Sqm 1345

20 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) Sqm 132

21 Providing Gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase Meter 100

22 Providing and fixing with glass of 12 mm thick toughened glass with SS 304 side connector, top patch, bottom patch with desired patterns/words acid-etched on the glass and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes and cuts etc. and fixing required door fittings and accessories viz. CP Brass long Handles (32x450), glass to glass center lock, door bottom lock etc. as directed by Engineer-in charge. (All Fittings and accessories shall be of the make: Dormakaba, Enox, Ozone, Icon) Sqm 59

23 Providing and fixing with glass of 12 mm thick toughened glass with SS 304 L-side connector and top and bottom connectors with desired patterns/words acid-etched on the glass and making necessary holes and cuts etc. as directed by Engineer-in charge. (All Fittings and accessories shall be of the make: Dormakaba, Enox, Ozone, Icon) Cost also including the SS Door Stopper with Rubber Bumper, floor mounted soft catcher. Sqm 286

24 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with Rawl plugs screws etc. Kg 1095

25 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, door frames jambs, sill etc. with necessary holes for fittings and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm Sqm 166

26 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work. Meter 852

27 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Make: Century, Black Cobra, SNG, Kit Ply Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 125 mm Meter 52

28 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and shall be paid separately). Make: Century, Black Cobra, SNG, Kit Ply. 30 mm thick Sqm 3

29 Providing and fixing ISI marked flush door shutter conforming to IS: 2202 (Part-I), block board core construction with 1st class hard wood frame, finished with 1.0 mm thick high pressure laminate on both sides and on all edges of the shutter, including cost of approved adhesive, pressing and fixing complete as per direction of Engineer-in-Charge. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 18

30 Providing and fixing factory made uPVC white colour sliding glazed window upto 2.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. Sqm 48

31 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion. Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Kg 4

32 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 2

33 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) Sqm 48

34 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With beading for uPVC windows Sqm 45

35 Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete Each 11

36 Providing and fixing bright finished brass handles with screws etc. complete: 125mm Each 10

37 Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300 x 16 x 5 mm Each 10

38 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm Each 10

39 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Sqm 5

40 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Including Glass partition Support @ Ceiling. Hot finished welded type tubes Kg 2243

41 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Kg 240

42 Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide × 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia × 50 mm long with 6 mm dia bolts, the other flange of cleat fixed to the angle hangers of 25 × 10 × 0.50 mm of required length with nuts and bolts of required size, and the other end of angle hanger fixed with intermediate G.I. channels 45 × 15 × 0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm shall be fixed at 450 mm centre to centre in a direction perpendicular to G.I. intermediate channels with connecting clips made out of 2.64 mm dia × 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 × 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in three layers covering up to 150 mm on both sides of joint and two coats of primer suitable for the board, all as per manufacturer’s specification, and also including the cost of making openings for light fittings, grills, diffusers, and cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer-in-Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I):2011 (Board with BIS certification marks) Sqm 269

43 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’. Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity Sqm 580

44 Providing and fixing at all height of 5 mm thick PVC False Ceiling with factory made PVC rigid foam sheet, Color as specified per specied by EIC, including providing and fixing of frame work made of 25x25x0.4 mm thick all round suitability fixed to wall with the help of dash fastner and hanger frame (600x 600 c/c) made GI slotted Tee having powder coading on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64 mm G.I. wire anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffuser, cut out made with frame of perimeter channels suitabily fixed at all complete as per direction of EIC Sqm 49

45 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile size upto 1.28 sqm Sqm 734

46 Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Sqm 60

47 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, includingpointing in white cement mixed with pigment of matching shade complete. Sqm 248

48 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Sqm 1375

49 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Sqm 120

50 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats Sqm 885

51 Finishing walls with Acrylic Smooth exterior paint of required shade. New work (Two or more coat applied 1.67 ltr/10 sqm over and including priming coat of exterior primer applied 0.90 litre /10 Sqm 759

52 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) Cum 39

53 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron) Kg 1763

54 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design."Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc."The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till thehanding over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. Sqm 282

55 Supply of Stainless Steel letters with weather proof MRF coating, box type to be made in 1 mm thick sheet with side walling box type of grade 304, height of each letter of size 250-450 mm (approx.) and with computerized graphicsfonts including cutting sheet, making box type letters and soldering nuts for fixing box type letters etc., complete as directed by Engineer-in-charge. Each 50

56 Fixing of Stainless Steel letters with weather proof MRF coating, box type to be made in 1 mm thick sheet with side walling box type of grade 304, height of each letter of size 250-460 mm (approx.) and with computerized graphics fonts including cutting sheet, making box type letters and soldering nuts for fixing box type letters etc., complete as directed by Engineer-in-charge. Each 50

57 Suplying and fixing of 12mm thick BWP plywood confirming to IS specfication for existing wall surface as directed by Engineer -incharge. Sqm 391

58 Providing & Fixing decorative high pressure laminated sheet of 1 mm thick plain / wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S, inch ding cost of adhesive of approved quality. Sqm 196

59 Providing and fixing WPC/ Charcoal fluted wall panels, min. 150mm wide x 23mm thick or as per the architectural design. The installation is to be done complete with necessary fixing clips, screws, adhesives, sealants and all required accessories. The work includes cutting and jointing at corners and edges, surface preparation, and finishing of all exposed edges with matching WPC corner beads and end profiles. The finished work must adhere to the design intent shown in the architectural drawings and manufacturer's installation guidelines, leaving a clean, level, and secure finish. Sqm 36

60 Supply and fixing 6 mm thick toughened (tempered) glass on Aluminium frame work for exterior cladding of building including glazing weatherseal silicone sealant for fixing etc all complete. Beforfe fixing, the toughened glass panels are to be cleaned thoroughly to enhance bonding. Further, the galzing silicone sealant is applied to the designated areas of frame/ opr the glass panels. After that the glass panels need to be set in to the frame work. The rate also includes providing glazing weatherseal silicone sealant, necessary M S pipe scaffolding/staging for execution of glazing cladding for G+2 storey building and removal of same after completion of work. (Aluminium frame work shall be paid separately) Sqm 42

61 Supply and fixing of interior premium Louvers of required thickness with variable size on plywood paneling including all necessary fixing accessories ezyCR8 spray, fevicol etc all complete as per architectural drawings and instructions of Engineer-in-chrage. The rate is inclusive of cost of Louvers, transportation, adhesives and labour charges as per the instruction of EIC and architectural requirement Sqm 196

62 Supplying and Fixing frosted film of high quality materils resistant to scratches & fading with thickness 240 micron on toughened glass doors/pertitions etc as per provided design including cleaning and prepration of glass surface, all required tools and tackles for fixing etc Sqm 259

63 Providing and fixing 6mm thick Suede Finish (Greenlam Clads, NewMika, Rehau, Exidec, Trespa, Fundermax) Exterior Grade High Pressure Compact Laminates having 1300mm x 3050mm board size made out of urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers along with UV protection film on both side finish surfaces. With a Density of >1350 kg/m3, Anti- graffiti properties and Resistant to - climatic shock, UV light, Grey Scale contrast (1500 hours of exposure-rating-4). Sqm 48

64 Providing and fixing bright finished SS pipe pull handles with screws etc. complete: 300 mm Make DORMA/ENOX/Hettich or equivalent Each 64

A Total from Sl. No. (1 to 64)

B Add GST @ 18%

C Total Quoted Amount including GST (Schedule - B)

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of Office for HR Department over the Existing Building, BIOM, Kirandul Complex

Tender Enquiry No.: Works-Kirandul/HR Dept. Office/2812/2026/53 Dt: 24/08/2026

MSTC Ref. No.: NMDC/Kirandul/Works/9/26-27/ET/336

Name of the Bidder

Sl. NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT

SCHEDULE - C Sanitary and Water Supply

1 Providing and fixing white vitreous china extended wall mounting water closet of approved shape including soft close seat cover of make Jaguar Cat No. VGS-WHT-81953 or Parryware Cat No.C0289 white rimless closet with soft close UF seat cover for EWC or Hindware Cat No.92092 - Starwhite or equivalent make with MRP not less than Rs.14000.00; including providing & fixing concealed flushing cistern with all fitting, nuts, bolts and gasket etc complete including mounting frame and drain pipe connection of make Jaguar Cat No.JCS-WHT-2400S or Parryware chrome Linea push plates round Cat No. E8220A1 or Hindware Conealo flusg plates zest or equivalent make with MRP not less than RS.1400.00; all complete as per directions of Engineer- in-charge. Each 8

2 Providing and fixing Health faucet for water closet with 8 mm dia 1.2-1.5 mtr long flexible tube and wall hook fixed to wall with rawl plugs and screws including all accessories complete of make Jaguar Cat No.ALD573 or Parryware Cat No.T9961A1 or HIndware Cat No.F160059 or equivalent make with MRP not less than Rs.1210.00; all complete as per direction of Engineer In-Charge. Each 8

3 Providing and fixing Table top wash basin of make Jaguar Cat No. Opal-OPS-WHT-15901N or Parryware Cat No. Inslim 410-C041K or Hindware Monalisa Cat No.10069 starwhite or equivalent with MRP not less than Rs. 6040.00; with CI brackets for supporting counter; 15 mm tall pillar taps with aerator of make Jaguar Cat No.ARI-39021 or Parryware Cat No. G3164A1 or Hindware Cat No.T9911A1 or Hindware Cat No.F860010 or equivalent make of MRP not less than Rs.360.00 including painting of fittings and brackets, cutting and making good the walls/ granite wherever required. All complete as per directions of Engineer- In charge. Each 10

4 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge (Make: Toto, Roca, Jaquar, Kohler). Each 6

5 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. Each 10

6 Providing and fixing Plantex Aluminium Frame Bathroom Mirror of size 600x4500 mm (24"x18") for wall mounted in Washroom of shade Brushed Black/Gold including all accessories for fitting. Rate includes for Suppling and Fixing charges, tools and accessories required for fixing. Each 8

7 Providing and fixing 600 mm long glass shelf with edges round off, supported on angle frame with C.P. brass brackets and guard rail complete of make Jaquar CAT No. AQN7771 or Parryware cat no. T6009A1 or equivalent make with MRP not less than Rs 1820; fixed with 40 mm long screws, rawl plugs etc., complete. Each 8

8 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore Each 14

9 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15mm nominal bore Each 8

10 Providing and fixing 15 mm dia CP Brass 2 way bib cock with CP cast brass wall flange complete. Make Jaquar CON-041F or MARC cat no.MSQ 2170 or equivalent. Each 8

11 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 6

12 Providing and fixing SS towel rail 600 mm long complete with brackets fixed to wooden cleats with screws with concealed fittings arrangement of approved quality of make Jaquar Cat No.AQN7711 or Parryware Cat No.T6401A1 or Hindware Cat No. F870012 or equivalent make with MRP not less than Rs.1550.00; all complete as per directions of Engineer-Incharge. Wash basins Each 6

13 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work. 25 mm dia nominal bore Metre 50

14 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall. 15 mm dia nominal bore Metre 50

15 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm dia nominal bore Each 6

16 Providing and fixing unplasticised Rigid PVC pipe soil, waste and vent pipes conforming to IS:13592, Type - B. or as approved by engineer in charge. The pipes includes all fitting/accessories such as bends, junctions neat rest sanitary beds, terminal guards, collars, holder bat clamps, clean out plugs and jointing and sealing etc. complete as per the satisfaction of engineer in charge (For payment purpose only length of pipe to be measured). 110 mm diameter Metre 100

17 Providing and fixing unplasticised Rigid PVC pipe soil, waste and vent pipes conforming to IS:13592, Type - B. or as approved by engineer in charge. The pipes includes all fitting/accessories such as bends, junctions neat rest sanitary beds, terminal guards, collars, holder bat clamps, clean out plugs and jointing and sealing etc. complete as per the satisfaction of engineer in charge (For payment purpose only length of pipe to be measured) 75 mm dia. Metre 48

18 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100 x 100 mm size P-type with Sewer bricks confirming to IS: 4885 Each 1

19 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diamerer Metre 50

20 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore Each 2

21 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore Each 1

22 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Per Litre 2000

A Total from Sl. No. (1 to 22)

B Add GST @ 18%

C Total Quoted Amount including GST (Schedule - C)

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of Office for HR Department over the Existing Building, BIOM, Kirandul Complex

Tender Enquiry No.: Works-Kirandul/HR Dept. Office/2812/2026/53 Dt: 24/08/2026

MSTC Ref. No.: NMDC/Kirandul/Works/9/26-27/ET/336

Name of the Bidder

Sl. NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT

SCHEDULE - D ELECTRICAL WORKS

1 Wiring for light point / fan point/ exhaust fan point / call bell point with 1.5 sq.mm. FRLS / FR PVC insulated copper conductor single core cable in Surface/ Recessed (concealed) medium class PVC conduit/ casing caping, with modular switch, modular plate, suitable GI box, including ceiling rose as required and earthing the point with with 1.5 sq.mm. FRLS / FR PVC insulated copper conductor single core cable etc as required. Extra Points for future use shall be terminated on suitable Ceiling Rose. (Rates shall be same for short, medium and long points). Nos 402

2 Supply and fixing in the same board modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5/6A switch and 3pin 5/6 A socket outlet. Nos 44

3 Supplying and fixing 1 or 2 Module (75mmX75mm) size/ modules, GI box alongwith modular base & cover plate for modular switches in recess/surface etc. as required Nos 10

4 Supplying and fixing 3 Module (100mmX75mm) size/ modules, GI box alongwith modular base & cover plate for modular switches in recess/surface etc. as required for Raw power Nos 80

5 Supplying and fixing 6 Module (200mmX75mm) size/ modules, GI box alongwith modular base & cover plate for modular switches in recess/surface etc. as required for UPS power Nos 80

6 Supplying and fixing 8 Module (125mmX125mm) size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required Nos 10

7 Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

7.1 5/6A Switch Nos 380

7.2 15/16A Switch Nos 44

7.3 3Pin 5/6A socket outlet Nos 380

7.4 6Pin 15/16A socket outlet Nos 44

7.5 Bell Push 2 Module with indicator Nos 16

8 Wiring for circuit /submain/light/power plug wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in Surface/ Recessed including suitable size, medium class B PVC conduit/casing caping as reqired.

8.1 2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire. (For Light Circuit) Mtrs 1350

8.2 2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire. (For Separate Board circuit) Mtrs 1650

8.3 2 x 4 Sq.mm + 1 x 4 Sq.mm earth wire. (For Power circuit) Mtrs 1150

8.4 2 X 6 Sq. mm + 1 X 6 Sq. mm. earth wire. (For main DB distribution) Mtrs 850

8.5 4 x 6 Sq.mm + 2 x 6 Sq.mm earth wire. (For DB distribution) Mtrs 410

8.6 4 x 10 Sq.mm + 2 x 6 Sq.mm earth wire. (For 3phase distribution) Mtrs 490

8.7 4 x 16 Sq.mm + 2 x 6 Sq.mm earth wire. (For Main DB) Mtrs 150

9 Supplying and fixing of 25 mm size of medium class PVC conduit along with all accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (For Earth GI wire, telephone and ethernet cable etc.) Mtrs 750

10 Supplying and drawing of 2 Pair, 0.5 Sq. mm. FRLS / FR PVC insulated annealed copper conductor, Unarmoured telephone cable in the existing concealed (Recessed) Steel / PVC conduct As required. Mtrs 650

11 Supply and fixing Modular telephone (RJ11) socket outlet on the existing modular switch box / cover plate including connections etc. as required. Nos 32

12 Supply and fixing of 100 pair telephone Junction box (Tag Block) made of 1.5 mm thick sheet steel drip proof with locking arrangement properly painted including Krone Module . Nos 1

13 Supply and fixing of 50 pair telephone Junction box (Tag Block) made of 1.5 mm thick sheet steel drip proof with locking arrangement properly painted including Krone module . Nos 1

14 Supplying and fixing Modular type call bell/ buzzer (2 Module) suitable for single phase, 230 V, complete as required. Nos 16

15 Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16A modular socket outlet and 15/16A modular switch, connection etc. as required. Nos 24

16 Installation, testing and commissioning of wall bracket/Ceiling Fitting of all sizes and shapes containing upto two GSL / CFL / LED lampfitting / LED spot light/4Feet LED batten light fitting complete with all accessories including connections by providing the required length of wire.etc. as required. Nos 380

17 Supply, fabricating, and Installing, the street / Flood Light light Bracket for fixing Street Light fittings / Flood Light Fitting / Blinkers / Post Top Lantern as per the shape given by the Engineer Incharge, it should be made with 1 meter lenghth 40 mm diameter, GI medium class pipe, 4 No. 16 mm nuts and bolts, 2 No. GI flat of 3 mm thick and 200 mm length, 40 mm width, for fixing the bracket to the wall / pole, complete with all accessories including connections etc. as required. Nos 10

18 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed/surface medium class PVC conduit, 2way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Nos 6

19 Installation testing and commissioning of ceiling fan, including wiring the downrod of standard length (Up to 60 cm) with 1.5 Sq. mm. FRLS PVC insulated, copper conductor, single core cable etc as required with fixing of anchor fastener. Nos 5

20 Supplying energy efficient 300 mm sweep wall mounted fan decorative type as per latest BEE standards with double ball bearing including all accessories , blades etc. as required but without fan regulator as per make list. Nos 16

21 Providing and fixing circular/ hexagonal g.i. box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick g.i. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the g.i. box by means of 3.3 mm dia round headed screws, one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. Nos 5

22 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required Nos 5

23 Supplying and fixing 25 A rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning complete etc. as required. Nos 26

24 Supplying and fixing 40 A rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning complete etc. as required. Nos 37

25 Supplying and fixing following rating Four pole 240 / 415 V AC 'C' curve, 10 KA Breaking Capacity (MCB) miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc as required.

26 Supplying and fixing 5A to 32A rating single pole 240 / 415 V 'C' curve, 10 KA Breaking Capacity miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc as required. Nos 112

27 Supplying and fixing 5A to 32A rating Double pole 240 / 415 V 'C' curve, 10 KA Breaking Capacity miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc as required. Nos 12

28 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. complete as required. (But without MCB/RCCB/Isolator)

0.0 8 way (2+8) , Double door Nos 4

29 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. complete as required. (But without MCB/RCCB/Isolator)

0.0 6 way (4 + 18), Double door Nos 4

0.9 8 way (4 + 24), Double door Nos 12

30 Supply, fixing & testing of 200 Amp 415 V AC, Four Pole wall/Surface and pole mounted Junction Box/Tap off Box (Bus bar Junction box) including Copper Bus bar having support insulator of 1.1 KV voltage grade for indoor installation, suitable for terminating upto 150 SQMM cable, with Powder coated CRCA Metallic sheet steel enclosure (minimum 1.6 mm thick sheet) & rubber gasket on door. with conduit knockouts having sufficient space for different cable sizes connections, weather resistant, dust & water proof, having suitable back mount frames, Colour: Grey, Make: Havells, L&T, ABB, BCH, Indoasian, Legrand, Nos 2

31 Earthing with GI. Earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure made up of red bricks and with cover plate having locking arrangement and watering pipe of 2.7 meter long, with GI wire of 6 SWG from the plate till the funel etc. with charcoal/ coke and salt complete as required. The firm has to test the earth pit value and record the value on the earth pit cover with paint in black background and yellow letters. Nos 5

32 Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble & nut, bolt ,washer etc. as required. Mtrs 140

33 Supply of approved make/model energy efficient ISI mark exhaust fan 200 mm sweep, 230V AC supply 50 HZ single phase as complete with all standard accessories such as motor, blades & louvers, brackets , rubber cushion etc. complete as required, minimum 1300 rpm, plastic blade with automatic shutters but without regulator for toilets. Nos 10

34 Supply of approved make/model energy efficient ISI mark exhaust fan 300 mm sweep, 230V AC supply 50 HZ single phase as complete with all standard accessories such as motor, blades & louvers, brackets , rubber cushion etc. complete as required, minimum 1350 rpm, metal blades with automatic shutters but without regulator for toilets. Nos 4

35 Installation of exhaust fan upto 450mm sweep in the existing opening, including making good the damage, connections, testing commissioning complete etc. as required. Nos 14

36 Supplying and fixing of Air Conditioner DB: Supplying & fixing 20A double pole 2 module switch indicator (for AC indoor units), along with 2 module GI Box equivalent in the preferred standard make. Nos 20

37 Spplying surface/recess mounted round shape (18-24)W LED downlighter with minimum 1125 lumen, 6500K suitable for operation on 230V 50Hz single phase AC Supply with electronic driver and 2KV surge protector and all accessories complete for ceiling/wall/surface etc, as required. CRCA Powder coated white housing, High Efficiency Translucence (HET) diffuser of polycarbonate, LED confirming to LM80 AND Lumen output to LM 79 and should also produce the certificate. Type test certificate report should be produced valid BIS certificate should be produced. Nos 120

38 Supply of Recess mounted LED Light Fitting type Square shape LED DOWNLIGHTER (300X300) MM, i.e..1' X 1') (18-24) WATTAGE. 200 - 250 V, AC, 50 HZ, The Luminair shall be capable of producing 120 LUX for each Watt. Secondary lence should be provided On the LED. CRCA powder coated white housing,, High efficiency Translucence (HET) diffuser of polycarbonate, The Inbuilt driver shall have Surge protection of 3KV minimum and Over current / overload protection. LED COLOUR : 6500K WHITE COLOUR LED Conforming to LM 80 AND LUMEN output TO LM 79 AND should also produce the Certificate. Type test report should be produced. Valid BIS certificate should be produced. MAKE: BAJAJ / PHILIPS / GE / CROMTON / HAVELLS / SURYA / WIPPRO / SYSKA / OSRAM / HALONIX Nos 54

39 Supply of Recess mounted LED Light Fitting LED Panel light of Size (600X600) MM, i.e., (2'X2') (34-36) Wattage. 200-250 V, AC, 50Hz. The Luminair shall be Capable of producing 100-120 Lux for each watt. Seconday lence should be provided on the LED. CRCA powder coated white housing, High Efficiency translucence (HET) diffuser of polycarbonate, The Inbuilt driver shall have Surge protection of 3KV Minimum and Over current /overload protection. LED Colour:6500K white colour LED conforming to LM80 AND Lumen Output to LM79 and should also produce the certificate. Type test Report should be produce. Valid BIS certificate should BE produced. Make: Bajaj/Wippro/GE/Crompton/Havells/ Nos 32

40 Supply of minimum of 3-Watt Premium LED Spotlight/Wardrob lights, Colour Temperature Warm White (2700 to 3000K) and had a lighting angle of 60 degree to deliver the best decorative lighting. The light is made of high-quality material uased for home décor articles kitchen shelves, cabinet and wardrobe etc. Minimum one year complete warranty modern design spotlight comes with high quality LM 80 tested LED wide voltage range & high voltage protection: Spotlight has a eide voltage range of 150-300 VAC & High voltage protection up to 400VAC, surge protection up to 3KV protection the device from fluctuations for long lasting performance easy installation. flush and recess mounted with spring loaded suspension and for false ceiling. Approx cut out size 25mm to 50mm. Finish type polished materil metal polycarboante black body, glass made up of high qulaity materil (Exact LED light colour may be decided by EIC during site execution time) complete as required Nos 120

41 LED Rope /strip light with connector equilent to philips mini marathon LED Rope light with connection, pack of 20 meter (20M=One set ), IP 65 Water proof strip/rope light with 400 lumen/meter, warm white (2700K to 3000K) with superior light output, Robust material, including driver, silicon material, for indoor & outdoor applications, power source corded electric, warranty minimum 1 year on the product, approx 72 LED/meter with 400 lumens /meter and approx. power consumption of 6 W/Meter. (Exact LED light colour may be decided during final execution time) complete as required. Set 8

42 Supply of approved make wall/celling mounted 4-Feet LED batten, fixture with minimum 1800 lumen, 6500K, suitable for operation on 230V 50HZ, single phase AC, supply with electronic driver and 2KV surge protector and all accessories complete for ceiling/wall/surface etc. as required. LED conforming to LM 80and 80 Lumne output to LM 79 and ahould also produce the certificate. type test report should be produced valid BIS cerificate should be produced. Nos 10

43 Supply of Flood light Lumn. (90-120)Watt light LED Luminaire / Fitting, Outdoor Application, IP 66 CLASS Protection. Luminaire to be provided with mounting brackets suitab;e for tower / pole mounting. The Luminair shall be capable of producing of 20 Lux for each watt. Secondary lence should be provided on the LED. The luminaire shall be suitable for working on 230 V, AC 50 HZ & Complete with driver. The inbuilt driver shall have surge and over current / Overload protection. LED COLOUR : YELLOW COLOUR LED Conforming to LM80 and output to LM 79 and should also produce the Certificate. Type test report should be produced, Valid BIS Certificate should be produced. Nos 6

44 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of above 35 sq. mm and upto 185 sq. mm size direct in ground including excavation,sand cushioning, protective covering and refilling the trench etc as required. (Minimum 800 mm Depth) Mtrs 50

45 Supply, Installation, Testing & Commissioning of 30 KVA on-line (including with external isolation transformer) Pure Sine wave, IGBT technology 30 KVA Active power, based (Rectifier & Inverter), true on-line double conversion, PF>0.99 fully DSP controlled type UPS system (3- Phase, input - 3 Phase, Output /1 Phase out) with remote status display panel with interface cables as per the Technical Specifications attached. Including Transient Voltage Surge Suppressor (TVSS) in input & output including all safety features and self protection as per latest IS. UPS with battery bank (12V/150AH/32 Nos SMF/VRLA Battery) Supporting rack structure for battery bank, Minimum 1 hours of power backup on full load 100% with external isolation transformer including lightning and surge protection, Including supply of metallic battery stand/rack having good strength adn insulating pad on the bottom with all necessary connecting betery Leads, Battery terminals and lugs and required cables of suitable sizes etc. Warranty on UPS-Minimum 3 Years of comprehensive warranty and minimum three years of battery warranty UPS shall have as per the technical specifications. including any other item required for the completeness of the UPS full functionality of system. Battery of 150AH SMF/VRLA Type 32 Nos (minimum 57600 AH) UPS shall have minimum 3 Years Warranty or more as provided by OEM (Witchever is higher) Nos 1

46 Installation, testing and commissioning of Rope/Strip LED light including all required accessories and related works etc. Mtrs 160

47 Supplying and fixing 0.6 Mtr high, Copper Air Terminal (Multispike Lightning Arrester) Rod for lightning protection along with all accessories complete as required Set 4

48 Providing and fixing GI strip 25 mm x 6 mm thick on parapet or surface of wall for lightning conductor along with clamping, jointing other accessories etc. as required. (for horizontal run & vertical run) Mtrs 130

49 SITC of 10Watt LED two way (top&bottom) wall washer lights (LED) Crystal Corridor, Facades & Landscapes Aisle Creative Decoration, Colour Temperature Warm White (2700 to 3000K) The light is made of high-quality material uased for home décor articles kitchen shelves, cabinet and wardrobe etc. Minimum one year complete warranty modern design spotlight comes with high quality LM 80 tested LED wide voltage range & high voltage protectioncolour will be decided by EIC during execution (Warmwhite, Blue, Green and Pink etc complete all required accessories & related work etc. Make: Halonix/Wipro/ Bajaj/Phillips/GE/CG/Havells/HPL/Syska. Nos 20

50 SITC of 2Watt of LED Cabinet spotlight Garnet Integrated Compact Design Ceiling Spot Light for Cabinets & Wardrobes Cabinet Spotlight Warm White (2700K or 3000K) (2W Cabinet Spotlight) including all required accessories etc. Make:Wipro/Philips/Bajaj/GE/Crompton/Havells/Halonix/Syska Nos 20

51 Design, Supplying, Installation, Testing and Commissioning of cubical type 630 Amp LT Panel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with ten tanks) suitable with busbar interconnection with suitable size of solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section, entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates. (Required termination spreader link along with phase barrier in the MCCB shall be provided for termination of power cables upto 3.5C x 300 Sq mm size and wherever required). INCOMER FEEDER: 630 Amps, TP&N, ACB, 36 kA, manually operated type with O/L, S/C, E/F microprocesser based release.- 01 No. Multifunction Meter - 01 No.;CBCT with ELR-01 No.;630/5A Current Transformer, CL-1.0, 10VA - 01 No.;Digital Voltmeter with Selector Switch, 01 No. (0-500V);Digital Ammeter with Selector Switch, 01 No. (0-630A);6A, 4P, MCB- 01 No.;R-Y-B, ON, OFF & Trip LED indication lamp; OUTGOING FEEDERS; 200Amp 6Nos 4P, MCCB, 36 kA, 100Amp 1No, 63Amp 3 Nos MCCB controlled and 63Amp 1 No with timer setting 4P, manually operated type with O/L, S/C & E/F CT-400/5A, CL-1.0, and space for 01 no. three phase, single source, electronic smart energy meter shall be provided. BUS BAR; 630A, TP&N, SC rating shall be 35 kA for 1 sec, High Elecrolytic grade Aluminium Bus Bar (E91-E). as required as per detail technical specifications. Nos 1

A Total from Sl. No. (1 to 51)

B Add GST @ 18%

C Total Quoted Amount including GST (Schedule - D)

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of Office for HR Department over the Existing Building, BIOM, Kirandul Complex

Tender Enquiry No.: Works-Kirandul/HR Dept. Office/2812/2026/53 Dt: 24/08/2026

MSTC Ref. No.: NMDC/Kirandul/Works/9/26-27/ET/336

Name of the Bidder

Sl. NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT

SCHEDULE - E Fire Detection and Alarm System

1 Supplying, installation, testing & commissioning of intelligent addressable photothermal detector (is the combination of Smoke and Heat detector) complete with mounting base complete as required Make : IAS Morley, Siemens, Bosch, Honeywell, PYROX, Ravel Nos 56

2 Supplying, installation, testing & commissioning of addressable fire control module complete as required. Make : IAS Morley, Siemens, Bosch, Honeywell, PYROX, Ravel Nos 4

3 Supplying, installation, testing & commissioning of addressable manual call point complete as required. Make : IAS Morley, Siemens, Bosch, Honeywell, PYROX, Ravel Nos 4

4 Supplying, installation, testing & commissioning of Short Circuit / fault isolator complete with base as required. Make : IAS Morley, Siemens, Bosch, Honeywell, PYROX, Ravel Nos 4

5 Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required. Make : IAS Morley, Siemens, Bosch, Honeywell, PYROX, Ravel Nos 4

6 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. Mtrs 650

7 Supplying and drawing Single pair, 2-core, 1.5 sqmm, speaker cable, Fire Retardant (FRLS) PVC insulated copper conductor for fire alarming system in the existing surface / recessed in existing steel conduit including connections and interconnections etc. as required. Complete in all respects. Make : IAS Morley, Siemens, Bosch, Honeywell, PYROX, Ravel Mtrs 80

8 Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. Make : Jindal, SAIL Mtrs 50

9 Supplying and fixing of 25 mm dia steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. Make : Jindal, SAIL Mtrs 650

A Total from Sl. No. (1 to 9)

B Add GST @ 18%

C Total Quoted Amount including GST (Schedule - E)

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of Office for HR Department over the Existing Building, BIOM, Kirandul Complex

Tender Enquiry No.: Works-Kirandul/HR Dept. Office/2812/2026/53 Dt: 24/08/2026

MSTC Ref. No.: NMDC/Kirandul/Works/9/26-27/ET/336

Name of the Bidder

Sl. NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT

SCHEDULE - F IT and Networking

1 Supply of 24 Port Managed PoE Gigabit Switch with Minimum 4 SFP Port Active Component Nos 4

2 5 MP Dome Camera with 20M IR Active Component Nos 7

3 16 channel NVR with 8 TB HDD Active Component Nos 1

4 Supply of 9 U Network Rack complete with Power Distribution Unit, Cable Manager , Cooling FAN, Minimum depth 500 mm Passive Component Nos 2

5 Supply of Single Mode, Duplex Fiber Optic Patch Panels, Rack Mountable 12port Fully loaded with LC connector” Passive Component Nos 4

6 Supply & Installation of CAT 6.o Certified I/O Boxes with bristish style Face Plates Passive Component Nos 90

7 Supply of minimum 23 AWG Copper (CAT 6.0 certified) Ethernet Cable Finolex/Dlink/Molex/Compscope/Legrand Passive Component Box 12

8 Supply of Single Mode SFP Module Active Component Nos 8

9 Supply & Installation of CAT6.0 Certified Jack Panel Passive Component Nos 5

10 Supply of LC LC Duplex Patch Cord Passive Component Nos 8

11 Supply of Cat6.0 certified 1 M Patchcord Finolex/Dlink/Molex/Compscope/Legrand Passive Component Nos 90

12 Splicing & Jointing of OFC Cable including all accessaries as required (Services) Nos 4

13 Supply & Laying of 25mm Casing capping /PVC Pipe for CAT 6.0 cable Laying including all accessaries as required (Services) Mtrs 540

14 Supply & Laying of 40/50 mm Casing capping /PVC Pipe for CAT 6.0 cable Laying above false ceiling including all accessaries as required (Services) Mtrs 540

15 Erection & Commissioning Charges including all accessaries as required (Services) Lump Sum 1

A Total from Sl. No. (1 to 15)

B Add GST @ 18%

C Total Quoted Amount including GST (Schedule - F)

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of Office for HR Department over the Existing Building, BIOM, Kirandul Complex

Tender Enquiry No.: Works-Kirandul/HR Dept. Office/2812/2026/53 Dt: 24/08/2026

MSTC Ref. No.: NMDC/Kirandul/Works/9/26-27/ET/336

Name of the Bidder

Sl. NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levies but Excluding GST AMOUNT

SCHEDULE - G Machine Room less Elevator

1 Supplying, installation & testing of 13 PAX LIFT MCB Distribution Board with horizontal type double door , three pole and neutral, sheet steel, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar including interconnections with powder painted including earthing etc. as required including MCB/RCCB having following specifications; (FOR 13 PAX LIFT). Detailed specification & required quantity as mentioned below. Set 1

1.1 Supplying, installation & testing of 13 PAX LIFT MCB Distribution Board with horizontal type double door , three pole and neutral, sheet steel, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar including interconnections with powder painted including earthing etc. as required including MCB/RCCB having following specifications; (FOR 13 PAX LIFT). Detailed specification & required quantity as mentioned below. EA

1.2 Supplying and fixing of 40A, 415 V, Four Pole (TPN), miniature circuit breaker (MCB), 10 kA, "C" curve suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required. EA

1.3 Supplying and fixing of 40A, 415 V, Four Pole (TPN), miniature circuit breaker (MCB), 10 kA, "C" curve suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required. EA

1.4 Supplying and fixing 25 A four pole, 415 volts RCCB/ELCB, having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. EA

1.5 Supplying and fixing 40 A four pole, 415 volts RCCB/ELCB, having a sensitivity current 300 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. EA

2 Supplying and fixing of 7W/9W, Bulk head LED bulb suitable for operation on 230 volt, 50 Hz, Single Phase AC supply including LED buld & fixtures (for lift shaft) Nos 5

3 Lift - 13 -Passenger Lift, (S+3), Design, Manufacture, Supplying, installation, testing and commissioning of 13 Nos Passenger lift, including liasioning charges to obtain approval from Statutory body for installation, without machine room/Machine room less lift for Transit guest house Building having contract speed of 1 to 1.5 MPS serving G+3 floors in the lift shaft as per scope of work and technical specifications.; Speed: 1.50 MPS; Floors: Ground + 3 Floors (3 Floors);Travel: 12 Meters (approx.);Stops & Openings: 4 Stops & 4 Opening; Shaft Dimension: As per manufacture; Controller: AC Variable Voltage & Variable Frequency Drive; Automatic Rescue Device Complete with Dry Maintenance Free Batteries as required; Nos 1

Operation: Microprocessor based single automatic push button/ simplex collective selective with/ without attendant; Power: 415 V, 3 Phase, 50 Hz, 4 wires system; Type of Doors; Car: Power operated, Centre opening horizontal sliding stainless steel scratch proof (moon rock finish) Car Panel and cowls in painted finish with Rear Side Glass Panel.; Landing doors : Stainless Steel Scratch proof hair line finish; A hand rail not less than 600 mm long at 900 mm above floor level to be fixed adjacent to control panel in the lift car.; Voice announcement system in the car to announce the position. Scaffolding arrangement, I-beam required size by OEM/No of hooks arrangement in slab and other OEM requirements to be provided by Civil contractor not in scope of LIft manufacture. Electrical License from Electrical safety department in civil contractor scope. Technical specification attached as Annexure-IV. NOTE: The contractor shall prepare and submit all required drawings for the civil foundation, lift pit/well, lift shaft walls, and all other associated civil works necessary for the installation of the lift/elevator. The excavation, PCC, RCC, reinforcement, shuttering/formwork, and other related civil items shall be executed for installation of Lift shall be measured and paid separately under the respective items of the Schedule of Quantities (BOQ).

A Total from Sl. No. (1 to 3)

B Add GST @ 18%

C Total Quoted Amount including GST (Schedule - G)

(A Government of India Enterprise)

NMDC WORKS - KIRANDUL

BIOM Kirandul Complex

Name of Work : Construction of Office for HR Department over the Existing Building, BIOM, Kirandul Complex

Tender Enquiry No.: Works-Kirandul/HR Dept. Office/2812/2026/53 Dt: 24/08/2026

MSTC Ref. No.: NMDC/Kirandul/Works/9/26-27/ET/336

Name of the Bidder

Sl. NO DESCRIPTION OF ITEM UNIT QUANTITY RATE (Rs) Inclusive of all taxes and duties, levise but Excluding GST AMOUNT

SCHEDULE - H VRF/VRV-Air Conditioning System

1 Supply of Variable Refrigerant Volume / Variable Refrigerant Flow, 40 HP outdoor units suitable for the environment friendly regrigeratnt - R410A. However, not more 12HP X 2NOS of outdoor units can be lined up to have 24 HP capacity. Energy saving combination shall be adopted to line up the outdoor units. (Outdoor unit may have Single / Multiple Compressors to meet the specified COP as per AHRI and IEERnot less than 6.5) FOR SECOUND FLOOR Nos 1

2 Supply of Variable Refrigerant Volume / Variable Refrigerant Flow, 40 HP outdoor units suitable for the environment friendly regrigeratnt - R410A. However, not more 18HP X 2NOS of outdoor units can be lined up to have 36 HP capacity. Energy saving combination shall be adopted to line up the outdoor units. (Outdoor unit may have Single / Multiple Compressors to meet the specified COP as per AHRI not less than 3.1 and IEER not less than 6.5) FOR THIRD FLOOR Nos 1

3 Supply Installation Testing & Commissioning of 4 WAY CASATTE AC 1 TR Nos 2

4 Supply Installation Testing & Commissioning of 4 WAY CASSATTE AC 1.6 TR Nos 5

5 Supply Installation Testing & Commissioning of 4 WAY CASSATTE AC 2.0TR Nos 2

6 Supply Installation Testing & Commissioning of 4 WAY CASSATTE AC 2.4 TR Nos 7

7 Supply Installation Testing & Commissioning of 4 WAY CASSATTE AC 4 TR Nos 4

8 CORDELESS REMOTE Nos 20

9 Lifting of Outdoor Units from Ground/Basement Floor to 2nd and 3rd Floor (as the case may be), installation, testing & commissioning of them Set 1

10 Supply & installation of Refrigerant 'Y' Joints / Separation Pipes required for distribution of refrigeratnt in copper piping etc., complete for Suction Line & Liquid Line as per design, for indoor units & outdoor units Set 20

11 Supply & Installation of High Density Copper Regrigerant Piping including supports, clamps etc., and including bends, coupling, Tees and necessary fitting for R410A applications Hard drawn Copper Dia - 1 3/8 (34.9 mm) Rmt 125

12 Supply & Installation of High Density Copper Regrigerant Piping including supports, clamps etc., and including bends, coupling, Tees and necessary fitting for R410A applications Hard drawn Copper Dia - 1 1/8 (28.58 mm) Rmt 90

13 Supply & Installation of High Density Copper Regrigerant Piping including supports, clamps etc., and including bends, coupling, Tees and necessary fitting for R410A applications Hard drawn Copper Dia - 7/8 (22.23 mm) Rmt 45

14 Supply & Installation of High Density Copper Regrigerant Piping including supports, clamps etc., and including bends, coupling, Tees and necessary fitting for R410A applications Soft drawn copper Dia - 5/8 (15.8 mm) Rmt 270

15 Supply & Installation of High Density Copper Regrigerant Piping including supports, clamps etc., and including bends, coupling, Tees and necessary fitting for R410A applications Soft drawn copper Dia - 3/8 (9.5 mm) Rmt 300

16 Supply & Installation of High Density Copper Regrigerant Piping including supports, clamps etc., and including bends, coupling, Tees and necessary fitting for R410A applications Soft drawn copper Dia - 1/4 (6.4 mm) Rmt 225

17 Supply & Installation of High Density Copper Regrigerant Piping including supports, clamps etc., and including bends, coupling, Tees and necessary fitting for R410A applications Soft drawn copper Dia - 3/4 Rmt 90

18 Supply & Installation of High Density Copper Regrigerant Piping including supports, clamps etc., and including bends, coupling, Tees and necessary fitting for R410A applications Soft drawn copper Dia - 1/2 Rmt 250

19 Supply & installation of Nitrile Rubber tubing for Copper pipe, duly insulated with closed cell elastomeric Nitrile insulation of specified thickness (19mm / 13mm), including supports, clamps, bends, couplings, Tees and necessary fittings for R 410A applications: Dia - 1/2 Rmt 250

20 Supply & installation of Nitrile Rubber tubing for Copper pipe, duly insulated with closed cell elastomeric Nitrile insulation of specified thickness (19mm / 13mm), including supports, clamps, bends, couplings, Tees and necessary fittings for R 410A applications: Dia - 3/4 Rmt 180

21 Supply and installation of Communication Cable of size 1.0 to 1.5 sqmm shielded, between Indoor Units & Outdoor Units using 25mm PVC conduit, elbows / junction boxes complete as required. Rmt 450

22 Supply and installation of Incoming electrical starter panel for 40 HP system, provided with voltage scanner (suitable for 3 ph - 4 wire voltage monitoring and display, Phase failure, unbalance, Phase sequence, under voltage, over voltage, Auto / manual Reset, adjustable unbalance trip setting, Adjustable under / over voltage settings, adjustable trip delay. RS232 communication port, True RMS values. Digital Voltmeter Schneider EM 6100 or its equivalent. Digital Ammeter (L&T intelligent panel meter, quasar model or its equivalent), Indiaction lamps for R,Y,B phase, Bus-bar having 200A, 4P MCCB at incoming and 3 nos. of 63A or suitable rated, 4P MCBs at outgoing L&T/Siemens Contactors Set 2

23 Pressure testing with nitrogen gas, Vaccumising including all consumables for the 40 HP system Set 1

24 Additional Gas charge for the 40 HP system with R410 gas on connecting outdoor units to the concerned indoor units Set 1

25 Supply & installation of 40mm / 32mm PVC pipe of 2 mm thick with 6mm thick nitrile rubber insulation for condensate drain Rmt 115

26 Supply and Fixing of GI cable Tray (300 mm x 50 mm) joined with connectors, suspended from the ceiling with bolts & nuts etc as required. Rmt 100

27 Civil Openings & Core Cutting for taking out drain pipes from each indoor units, if required Nos 10

28 Supply & installation of Touch Panel controller Set 2

29 Comprehensive Annual Maintenance Charges for 01 year after warranty period of one year from date of commissioning as per technical specification enclosed. LS 1

30 Supply and Laying of 4X 10 Sqmm Copper Armoured cable for supply of power panel to out door units Rmt 90

A Total from Sl. No. (1 to 30)

B Add GST @ 18%

C Total Quoted Amount including GST (Schedule - H)