Loading
Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.5 L
Closing Date
1 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SIG/NORTH
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less ;where V= Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, asper the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information asper format-6, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s)during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Any signaling work involving outdoor work and / or addition and /or alteration in existing Indoor signaling system. OR any CLS or RI or EI or TPWS or IBS or ABS or BPAC work involving indoor and/or outdoor. Similar work to include indoor if the tendered work involves addition and / or alteration in existing indoor signaling system and outdoor if the tendered work involves outdoor work. OR Any such work involving activities as given in the name of the tendered work.
14 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own or on behalf of a partnership concern. If the tender is submitted on behalf of a partnership concern, he should submit the certified copy of partnership deed (PD) along with the tender and authorization to sign the tender documents on behalf of partnership firm. If these documents are not enclosed along with the tender documents, the tender will be treated as having been submitted by individual signing the tender documents. The tenderer whether sole proprietor, a limited company or a partnership firm if they want to act through agent or individual partners should submit along with the tender or at a later stage, a power of attorney(POA) duly stamped and authenticated by a Notary public or by Magistrate in favour of the specific person whether he or they be partners of the firm or any other person specifically authorizing him or them to submit the tender, sign the agreement ,receive money, witness measurement, sign Measurement Books, compromise, settle, relinquish any claims preferred by the firm and signed No claim certificate and refer all or any dispute to arbitration.
Tenderer should clearly state the status of firm and submit the relevant document in support of authentication, in absence of following/relevant documents the offer of tenderer is summarily rejected: (A)Self-declaration /proprietorship certificate in case of proprietor firm along with POA if any. (B) Partnership deed and power of attorney in case of partnership firm. (C)Certified copy of an extract of resolution passed by the board of directors in case of limited firm or Private Limited Company
(a) Sole Proprietorship Firm: (i)All documents in terms of Para 10 of the Tender Form (Second Sheet)of Tender document
(b) HUF: (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and 1.1.2 he has the authority, power and consent given by other members to act on behalf of HUF. (ii)All other documents in terms of Para10 of the Tender Form (Second Sheet)of Tender document
(c) Partnership Firm: (i)All documents as mentioned in para18 of the Tender Form document
(d) Company registered under Companies Act2013: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation(iii)A copy of Authorization/Power of Attorney 1.1.4 issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)All other documents in terms Para 10 of the Tender Form (Second Sheet) of Tender document
(e) LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from 1.1.5 participation intenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/ LLP or JV in which they were/ are partners/members. Concealment /wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract.(v)All other documents in terms of Para 10 of the Tender Form(Second Sheet).
(f) Registered Society & Registered Trust: (i)A copy of Certificate of Registration (ii)A copy of Memorandum of Association of Society/Trust Deed (iii)A copy of Power of Attorney in favour of 1.1.6 the individual to sign the tender documents and create liability against the Society/Trust. (iv)A copy of Rules & Regulations of the Society (v)All other documents in terms of Para 10 of the Tender Form (Second Sheet) of tender document
Information as per Para 16 of GCC Part (1)(Tender form second sheet Annex-I) related to Employment/Partnership Etc. of Retired Railway Employees and Clauses 59 (9) & 62 (1) (xv) to GCC regarding employment etc. Of retired government officers by railway contractors
Certificate of Information regarding EMPLOYMENT/PARTNERSHIP etc. of Retired Railway Employees with the tender as per the attached proforma, Format 11 of tender document
Certificate of NO RELATIVE being an employee of Western Railway as per attached Performa Format10 of Tender document
Signal & Telecom work in connection with (1)Virar - Surat - TTR(TWS+WCMS) 87 Nos. & TSEJ 56 Nos.(2) Joravasan - Surat (DN) - TRR(P) - 8.702 Tkm.(3)Virar - Joravasan - CTR(P) - 0.632 Tkm, TRR(P) - 4.146 Tkm & TSR(P) - 3.404 Tkm of Virar - Surat Section of Mumbai Division.
SG_216_2_156_WA_PH31
SG_216_2_156_WA_PH31
Open
Works - General
6 Months
Mumbai, Maharashtra
₹0
₹2.5 L
1 Jun 2026
8 May 2026
18 May 2026
132 items across 9 schedules · ₹1,23,64,624.35 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | G.I. Bonding wire soft for track circuit bonding 8 S.W.G. (4mm Dia.) or as per instructions of Engineer In-Charge. | Kg | 500.00 | 68.17 | 34,085 |
| 2 | Channel Pins MS(Galvanized) single roove, 7 mm suitable for 4mm dia bonding wire as per spec No IRS S 17 & RDSO Drg No. S-69/M. | Numbers | 1000.00 | 6.04 | 6,040 |
| 3 | RAIL TWIST ADAPTOR FOR 7.2MM drill for 19 MM WELDON or as per instructions of Engineer In- Charge. | Numbers | 4.00 | 674.96 | 2,699.84 |
| 4 | RAIL TWIST ADAPTOR FOR 13MM drill for 19 MM WELDON or as per instructions of Engineer In- Charge. | Numbers | 4.00 | 850.19 | 3,400.76 |
| 5 | RAIL TWIST ADAPTOR FOR 16MM drill for 19 MM WELDON or as per instructions of Engineer In- Charge. | Numbers | 4.00 | 1,152.86 | 4,611.44 |
| 6 | RAIL TWIST DRILL DIA 7.2MM FOR ADAPTOR 19 MM WELDON or as per instructions of Engineer In-Charge. | Numbers | 5.00 | 1,045.48 | 5,227.4 |
| 7 | RAIL TWIST DRILL DIA 13MM ADAPTOR 19 MM WELDON or as per instructions of Engineer In- Charge. | Numbers | 5.00 | 2,820.2 | 14,101 |
| 8 | RAIL TWIST DRILL DIA 16MM ADAPTOR 19 MM WELDON or as per instructions of Engineer In- Charge. | Numbers | 5.00 | 3,229.66 | 16,148.3 |
| 9 | Point insulation Complete set as per RDSO Specification IRS: S-40/84 for Switch racket, Split-Stretcher bar & Gauge tie plates (52 Kg/60Kg as per site requirement) | Numbers | 50.00 | 1,345.93 | 67,296.5 |
| 10 | SS taper pin(stud) 15mm dia/65mm long with one plain was er, one spring washer & two nuts for siemens AFTCas per drg no:DRM/SG/942. | Numbers | 200.00 | 152.03 | 30,406 |
| 11 | Supply of SS Taper pin M-6 complete with one SS locking nut, 2 washer and 2 spring washer for AFTC. | Numbers | 50.00 | 35.34 | 1,767 |
| 12 | Supply of SS Taper pin M-10 complete with one SS locking nut, 2 washer and 2 spring washer for AFTC. | Numbers | 50.00 | 64.94 | 3,247 |
| 13 | Supply of Lug for M-6 taper pin suitable for 17 sq mm wire with 2 holes. | Numbers | 50.00 | 51.57 | 2,578.5 |
| 14 | Supply of Lug for M-10 taper pin suitable for 17 sq mm wire. | Numbers | 50.00 | 51.57 | 2,578.5 |
| 15 | Maintenance Free Earth Electrode of length 3 m, including supply of 3 bags of Earth enhancement material for earthling (10 kg/bag)for each electrode & other accessories as per Drg. No. SDO/RDSO/E&B/001 and RDSO Spec No.RDSO/SPN/197/2008. This item includes the following items: (a) Copper-bonded steel electrode of 3.0 meters long& 17.2mm dia with Cu-bonding thickness of min 250 micron - 1 no. (b)Earth-enhancing compound (10Kg/Bag) - 3 No. (c)Cu-strip200 X25 X 6 mm to terminate earth rod =1no. (d) Cu-strip 300 X25 X 6 mm(MEEB) =1no. (e) Cu-strip 150 X25 X 6mm(SEEB) = 1no. (Inspection by RDSO) | Numbers | 20.00 | 10,403.08 | 2,08,061.6 |
| 16 | Disconnect Terminal Block, Screw less type, 4- wire front entry (Two in-put & Two out-put) The colour will be decided by Engineer-in-Charge. (Preferably In Blue, Red & Grey Colors in the ratio of 1:2:3) | Numbers | 1000.00 | 58.53 | 58,530 |
| 17 | Supply of End plate for above item (I) 2.5mm/0.091 in thick as per site requirement. | Numbers | 250.00 | 11.07 | 2,767.5 |
| 18 | Supply of End Stopper for above item (I) 10mm/0.0394 in width as per site requirement. | Numbers | 250.00 | 10.86 | 2,715 |
| 19 | Double Walled Corrugated (DWC) HDPE Pipe with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & anti-oxidant and non flame propagating type in 6 meters straight length and of size 120 mm outer die,& 103.5 mm inner dia. (The manufacturers, suppliers must produce valid IS license and should be certified under ISO 9000 and shall submit copy of certificate). One of the following coupling arrangements should also be supplied with each pipe as per the site requirement. | Numbers | 20.00 | 1,912.2 | 38,244 |
| 20 | Digital low current clamp meter to measure current leaks (parasitic draw down to 1 mA) and electric loads from 1mA to 100 Amp AC/DC, Voltages from 0 to 600V AC/DC, small jaw size to measure current in signalling circuit, 4 digit display. Make -Fluke, GTC/KEW, Scope or superior with better specification as mentioned with all accessories like test lead, batteries and carrying case, sample may be got approved from consignee before supply. | Numbers | 4.00 | 18,194.34 | 72,777.36 |
| 21 | Battery operated Rail core drilling machine with quick action clamping system on track along with 18 mm TCT rail core drill. Maximum core cutting capacity 36 mm, rated speed 250/450 RPM.Battery type Lion, Battery voltage 50V, battery pack capacity 4AH. Number of batteries supplied- 2 Nos with suitable charger 1 no. Special designed pressurized internal spindle cooling to give maximum life of core cutter by avoiding heating. 3 sets of 22, 13, 16, 7.2 gauze drills adapters to be provided along with the machine. Weight of the machine 18.5 kgs maximum. Make- Eibenstok, Bosch, KPT with all accessories suitable for the Railway Signalling and along with carrying case. | Numbers | 4.00 | 1,12,848.12 | 4,51,392.48 |
| 22 | Supply of copper lug 25sq mm suitable for siemens AFTC lead wire (TU), make dowels, braco or similar | Numbers | 1000.00 | 9.71 | 9,710 |
| 23 | Supply of copper lug 25sq mm,8mm dia holes suitable for siemens AFTC center connection with double holes, Make dowels, braco or similar. | Numbers | 500.00 | 117.56 | 58,780 |
| 24 | Supply of Nylon Insulation for Thick Web point machine, consist of Insulating. (1) plate - 02 Nos . as per RDSO Drg. No-S-34041(2) Nylon Insulation bush-8 Nos , as per RDSO Drg. No-(a) S-32199-04 Nos . (b) S-8813-04 Nos , (3) Nylon Insulation Washer 08 Nos, as per RDSO Drg. No. (a) S-8640/1-04 Nos . (b) S-8640- 04 Nos. 2) Through rod Insulation = 1 no Bush (RDSO Drg No. CSE-8640/1, 2 nos Washers (CSE8640/2) 3) Lock slide Insulation -2 nos Bushes (RDSO Drg No- CSE 8640/A) 4 nos Washers (RDSO Drg No. CSE-8640/1). 4) Detection slide insulation =2 nos Bushes (RDSO Drg no. 8641/A), 4 nos Washers (RDSO Drg No-8640/1). 5) SSD Insulation Rod = 1no. Plate (RDSO Drg No S325/M), 2 nos . Bushes (RDSO Drg No-T10372), 4 nos. Washers (RDSO Drg No T-10371). 6) SSD Insulation in Rail 1 no . Washer (RDSO Drg No washer : S8640) 1 no Bush (RDSO Drg No S8641/A) 7) P bracket Insulation :- Insulation Plate 01 (RH) RDSO Drg No: S3265 Insulation Plate = 01 No (LH) RDSO Drg no. S3266 , Insulation Bushes=04 nos. RDSO Drg no S23199 Insulation Washer : 04 nos . RDSO Drg no. S8640. | Set | 20.00 | 995.92 | 19,918.4 |
| Schedule total | ₹11,17,083.58 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TD156R.pdf
ATTACHMENT
TD156R.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .