Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.4 LAccepted-AOC RAM SHIV COLONY GALI NO 2 NAIKA CHATNAG ROAD JHUNSI PRAYAGRAJ UP 211019 | PRAYAGRAJ | UTTAR PRADESH | 211019 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹9.2 L+₹26,190 (2.94%)Rejected-Finance HYDERABAD TELANGANA 500076 INDIA UDYAM TS 02 0009467 | MEDCHAL MALKAJGIRI | TELANGANA | 500076 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹9.2 L+₹31,142.50 (3.50%)Rejected-Finance CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹11.2 L+₹2.3 L (25.3%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹11.4 L+₹2.5 L (27.9%)Rejected-Finance ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | VISAKHAPATANAM | ANDHRA PRADESH | 530001 | L5 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | POWER TECH ENGINEERS L2 | TARA ENTERPRISES L1 | Jai Maa Electrical Works L3 | GS Engineers L5 | M/s A.S. ENGINEERS L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Maintenance & servicing of DG set of any make, type, model as per set norms of the original manufacturer set and by the authorised rep of the company after unscrewing nut, bolts, screws etc. for servicing, maintenance, tigthtening, adjustment & cleaning of all moving and stationary parts of DG set, complete and segregating the parts for repair/ refixing/ replacing of capacity 10KVA , complete all as specified and directed.
Make of DG sets :- Kirloskar/Crompton Greaves/Ruston/Ashok Leyland
Note: The quoted rate includes the following:
(a) Taking down of unserviceable parts.
(b) Any minor repair, replacement of minor parts such as screws, gasket, nuts, bolts, washers, cleaning & greasing etc. of DG set parts.
(c) Defective parts/ engine oil to be replaced will be measured & paid separately under supply only item. (Item No 7 to item No 39 as apended below). | 1 | Each job | 3,000 ₹3,000 | 1,000 ₹1,000 Lowest | 1,200 ₹1,200 | 1,000 ₹1,000 Lowest | 2,000 ₹2,000 |
| 2.00 | All as per Serial Item No. 1 here-in-before but capacity 35 KVA | 2 | Each job | 4,000 ₹8,000 | 1,000 ₹2,000 Lowest | 1,300 ₹2,600 | 2,000 ₹4,000 | 3,000 ₹6,000 |
| 3.00 | All as per Serial Item No. 1 here-in-before but capacity 63 KVA | 2 | Each job | 6,000 ₹12,000 | 1,500 ₹3,000 Lowest | 1,500 ₹3,000 Lowest | 2,500 ₹5,000 | 2,800 ₹5,600 |
| 4.00 | All as per Serial Item No. 1 here-in-before but capacity 75KVA | 2 | Each job | 8,000 ₹16,000 | 1,500 ₹3,000 Lowest | 1,900 ₹3,800 | 3,000 ₹6,000 | 2,500 ₹5,000 |
| 5.00 | All as per Serial Item No. 1 here-in-before but capacity 82.5KVA | 1 | Each job | 9,000 ₹9,000 | 1,500 ₹1,500 Lowest | 2,000 ₹2,000 | 3,000 ₹3,000 | 2,000 ₹2,000 |
| 6.00 | All as per Serial Item No. 1 here-in-before but capacity 400KVA | 1 | Each job | 10,000 ₹10,000 | 2,500 ₹2,500 | 4,500 ₹4,500 | 5,000 ₹5,000 | 2,000 ₹2,000 Lowest |
| 7.00 | Primary fuel filter element for DG set capacity 10KVA | 1 | Each | 350 ₹350 | 300 ₹300 Lowest | 300 ₹300 Lowest | 500 ₹500 | 450 ₹450 |
| 8.00 | Primary fuel filter element for DG set capacity 35KVA | 2 | Each | 350 ₹700 | 300 ₹600 Lowest | 400 ₹800 | 1,200 ₹2,400 | 500 ₹1,000 |
| 9.00 | Primary fuel filter element for DG set capacity 63KVA | 2 | Each | 350 ₹700 | 300 ₹600 Lowest | 400 ₹800 | 1,200 ₹2,400 | 600 ₹1,200 |
| 10.00 | Primary fuel filter element for DG set capacity 75KVA | 2 | Each | 350 ₹700 | 300 ₹600 Lowest | 500 ₹1,000 | 1,200 ₹2,400 | 680 ₹1,360 |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
11 Jul 2025, 6:00 pmClosed
AGE (I) Highground
AGE (I) Highground Chandigarh
REPAIR TO DG SETS, AMF PANELS, STP AND CONNECTED WORKS AT AIR FORCE STATION HIGHGROUND UNDER AGE (I) HIGHGROUND CHANDIGARH
2025_MES_714335_1
AGE (I)/HG CHD/T-07/2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
AGE (I) Highground Chandigarh
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) Highground
₹30,000
Yes
10 Sept 2025
13 Jun 2025
18 Jul 2025
13 Jun 2025
11 Jul 2025
27 Jun 2025
Amount
Maintenance & servicing of DG set of any make, type, model as per set norms of the original manufacturer set and by the authorised rep of the company after unscrewing nut, bolts, screws etc. for servicing, maintenance, tigthtening, adjustment & cleaning of all moving and stationary parts of DG set, complete and segregating the parts for repair/ refixing/ replacing of capacity 10KVA , complete all as specified and directed. Make of DG sets :- Kirloskar/Crompton Greaves/Ruston/Ashok Leyland Note: The quoted rate includes the following: (a) Taking down of unserviceable parts. (b) Any minor repair, replacement of minor parts such as screws, gasket, nuts, bolts, washers, cleaning & greasing etc. of DG set parts. (c) Defective parts/ engine oil to be replaced will be measured & paid separately under supply only item. (Item No 7 to item No 39 as apended below).
All as per Serial Item No. 1 here-in-before but capacity 35 KVA
All as per Serial Item No. 1 here-in-before but capacity 63 KVA
All as per Serial Item No. 1 here-in-before but capacity 75KVA
All as per Serial Item No. 1 here-in-before but capacity 82.5KVA
All as per Serial Item No. 1 here-in-before but capacity 400KVA
Primary fuel filter element for DG set capacity 10KVA
Primary fuel filter element for DG set capacity 35KVA
Primary fuel filter element for DG set capacity 63KVA
Primary fuel filter element for DG set capacity 75KVA
Primary fuel filter element for DG set capacity 82.5KVA
Primary fuel filter element for DG set capacity 400KVA
Secondry fuel filter element for DG set capacity 10KVA
Secondry fuel filter element for DG set capacity 35KVA
Secondry fuel filter element for DG set capacity 63KVA
Secondry fuel filter element for DG set capacity 75KVA
Secondry fuel filter element for DG set capacity 82.5KVA
Secondry fuel filter element for DG set capacity 400KVA
Air filter element for DG set capacity 10KVA
Air filter element for DG set capacity 35KVA
Air filter element for DG set capacity 63KVA
Air filter element for DG set capacity 75KVA
Air filter element for DG set capacity 82.5KVA
Air filter element for DG set capacity 400KVA
Oil filter element for DG set capacity 10KVA
Oil filter element for DG set capacity 35KVA
Oil filter element for DG set capacity 63KVA
Oil filter element for DG set capacity 75KVA
Oil filter element for DG set capacity 82.5KVA
Oil filter element for DG set capacity 400KVA
Fuel line complete for DG set capacity 10KVA
Fuel line complete for DG set capacity 35KVA
Fuel line complete for DG set capacity 63KVA
Fuel line complete for DG set capacity 75KVA
Fuel line complete for DG set capacity 82.5KVA
Fuel line complete for DG set capacity 400KVA
Water hose pipe set complete for DG set capacity 40KVA
Water hose pipe set complete for DG set capacity 63 to 82.5KVA
Water hose pipe set complete for DG set capacity 400KVA
Material and labour for taking out radiator and repairing/brazing to make it leakage free, cleaning and re-fixing the radiator including testing for DG set capacity 10KVA to 82.5 KVA, complete all as specified and directed.
All as per item No. 40 here-in-before but DG set capacity 400KVA complete all as specified and directed.
Supply only lubricant oil (Engine oil) SAE30 complete all as specified and directed.
Supply, install, connecting and testing in replacement maintenance free batteries, 12 Volts, 130AH, complete all as specified and directed.
Supply, install, connecting and testing in replacement maintenance free batteries, 12 Volts, 92AH, complete all as specified and directed.
Supply, install, connecting and testing in replacement maintenance free batteries, 12 Volts, 180 AH complete all as specified and directed.
Supply and fix, battery lead not less than 1.5 metre long, made out of 50 Sqmm copper cable with terminal of brass with marking (+)/(-) and fixing in position and testing, including taking down and removal, complete all as specified and directed.
Supply and filling, coolant in radiators of DG sets as per DG set manufacturer's recommendations at different locations, brought at site in sealed packets, complete all as specified and directed.
Maintenance, repair, servicing and calibration of automatic mains failure panel, DC & 415/440 volt AC supply operated system by locating faults and replacement of unserviceable parts and components for DG set 10KVA to 400KVA and testing on completion , complete all as specified and directed. Make of DG sets:- Kirloskar/Crompton Greaves/Ruston/Ashok Leyland Note: The quoted rate includes the following: (a) Taking down of unserviceable parts. (b) Any minor repair, replacement of minor parts such as screws, gasket, nuts, bolts, washers, cleaning & greasing etc. of DG set parts. (c) Defective parts/ engine oil to be replaced will be measured & paid separately under supply only
Repair of faulty worn out control wiring DC/AC for engine starting and off, with adequate and suitable size copper conductor wire, connected with proper copper lugs & terminals through protection pipe/casing, complete all as specified and directed.
Repair of worn out/faulty internal wiring of controls and timers, indicating/measuring instruments through various control fuses and relays with suitable and adequate size of copper conductor wire, connected with suitable copper lugs and terminals, complete all as specified and directed.
Material & Labour for replacing the unserviciable AVR of DG sets up to the capacity of upto 63 KVA and testing complete all as specified and directed.
Material & Labour for replacing the unserviciable AVR of DG sets up to the capacity of 75 to 82.5 KVA and testing complete all as specified and directed.
Material and Labour for replacing the unserviciable AVR of DG set of capacity of 400 KVA and testing complete all as specified and directed.
Material and Labour for repairing battery charging dynoma including replacing worn out/unserviciable spares of the capacity of 400 KVA all as specified and directed.
Material and Labour for repairing self starfer including replacing worn out/unserviciable spares up to the capacity of 35 KVA to 82.5 KVA all as specified and directed.
Material and Labour for repairing self starfer including replacing worn out/unserviciable spares up to the capacity of 63 KVA to 82.5 KVA all as specified and directed.
Material and Labour for repairing self starter including replacing worn out/unserviciable spares of capacity of 400 KVA all as specified and directed.
Supply and fix in repair Power contractor 3 pole 130 Amps 415 volts operating coil , complete all as specified and directed. Make-L&T MCX-23 OR EQUIVALENT AS IN APPX 'B'.
Supply and fix in repair power contractor 3 pole 200 Amps 415 volts operating coil , complete all as specified and directed. Make: L&T OR EQUIVALENT AS IN APPX 'B'.
Supply and fix in repair power contractor 3 pole 500 Amps 415 volts operating , complete all as specified and directed. Make-L&T MCX-44 OR EQUIVALENT AS IN APPX 'B'.
Supply and fix in repair power contractor 3 pole 63Amps 415 volts operating , complete all as specified and directed. Make: L&T OR EQUIVALENT AS IN APPX 'B'.
Material & Labour for replacing the unserviciable Volatge monitoring relay of AMF panel of DG sets up to the capacity of 63KVA and testing complete all as specified and directed.
Material and Labour for replacing the unserviciable Volatge monitoring relay of AMF panel of DG sets up to the capacity of 75 to 82.5KVA and testing complete all as specified and directed.
Opening of engine of DG set 400 KVA of any make, type, model as per set norms of the original manufacturer set and by the authorised rep of the company after unscrewing nut, bolts, screws etc for repair and replacing unserviceable parts and refixing the engine after making it fully functional complete all as specified and directed. Note- Defective parts of engine to be replaced will be measured & paid separately under supply only items (from item No 65 to item No 76 as apended below).
Supply only liner cylinder of engine.
Supply only piston ring set of engine.
Supply only piston assembly
Supply only liner O ring set of engine.
Supply only head gasket of engine.
Supply only complete gasket set of engine.
Supply only connecting rod bearing top and bottom
Supply only main bearing (top and bottom)
Supply only Connecting rod
Supply only oil seal set
Supply only valve set
Supply only valve guide
Opening of engine of DG set upto the capacity of 82.5 KVA of any make, type, model as per set norms of the original manufacturer set and by the authorised rep of the company after unscrewing nut, bolts, screws etc for repair and replacing unserviceable parts and refixing the engine after making it fully functional complete all as specified and directed. Note- Defective parts of engine to be replaced will be measured & paid separately under supply only items (from item No 77 to item no 87 as apended below).
Supply only liner of engine.
Supply only piston ring set of engine.
Supply only piston assembly
Supply only liner O ring set of engine.
Supply only head gasket of engine.
Supply only complete gasket set of engine.
Supply only Le bearing
Supply only M bearing
Supply only Connecting rod
Supply only oil seal set
Supply only valve set
Repairing/Caliberating actuator of DG set upto 63 Kva capacity complete all as specified and directed.
Repairing/Caliberating actuator of DG set 75 to 82.5 Kva capacity complete all as specified and directed.
Calibearation of of DG set controller of capacity upto 400 kva complete all as specified and directed.
Supply and fixing in replacement lubricant oil pump for DG sets suitable upto to the capacity upto 75 KVA including diamantling and refixing the accessories of prime mover all as specified and directed.
Supply and fixing in replacement lubricant oil pump for DG sets suitable upto to the capacity upto 82.5 KVA including diamantling and refixing the accessories of prime mover all as specified and directed.
Supply and fixing Water pump for DG sets suitable upto to the capacity upto 82.5 KVA including diamantling and refixing the accessories of prime mover all as specified and directed.
Supply and fixing Water pump for DG sets suitable upto to the capacity of 400 KVA including diamantling and refixing the accessories of prime mover all as specified and directed.
Supply and Fixing in replacement MCCB 400 Amps , 415 Volts, 35/36 KA ,4 POLE, overload adjustable type including complete connection complete all as specified and directed.
Supply and Fixing in replacement MCCB 350 Amps , 415 Volts, 35/36 KA ,4 POLE, overload adjustable type including complete connection complete all as specified and directed.
Supply and Fixing in replacement MCCB 250 Amps , 415 Volts, 35/36 KA ,4 POLE, overload adjustable type including complete connection complete all as specified and directed.
Supply and Fixing in replacement MCCB 160 Amps , 415 Volts, 16/18 KA ,4 POLE, overload adjustable type including complete connection complete all as specified and directed.
Supply and Fixing in replacement MCCB 63 Amps , 415 Volts, 16/18 KA ,4 POLE, overload adjustable type including complete connection complete all as specified and directed.
Supply and fix in replacement of fully automatic battery charger suitable for 12V/24V battery upto the capacity of 180AH having Ammeter and charge cut option with suitable leads complete all as specified and directed.
Material & Labour for cleaning of diesel tank of DG set of any capacity upto 400KVA including replacement of worn out pipe line and measuring scale and fixing in original position and make it leak proof with necessary clamps complete all as specified and directed.
Taking out FIP from DG set, of cap upto 82.5kva transportation to authorised service centre for repair /maintenance and refixing to DG set including replacement of necessary spare parts such as Plunzers, governer kit with pin , Nozzels , Head ball guide kit, Head sheet , Rock rod, Rollar bearing , oil seal, piston & rings pin, jain kit and sleeves complete all as directed and specified.
Taking out FIP from DG set, of cap upto 400kva transportation to authorised service centre for repair /maintenance and refixing to DG set including replacement of necessary spare parts such as Plunzers, governer kit with pin , Nozzels , Head ball guide kit, Head sheet , Rock rod, Rollar bearing , oil seal, piston & rings pin, jain kit and sleeves complete all as directed and specified.
Material and Labour for shifting heavy items as dg sets/excavation/ cleaning areas/cleaning site by providing crane/hydra/excavators including crane or hydra required at site complete all as specified and directed.
Taking out of alternator upto 82.5 kva KVA DG set of of any make at site 3 phase 415 volts 50 Hz from the existing position after disconnecting all electrical cable earthing and transportation to workshop,dismantling the alternator and rewinding the same with existing guage super enamelled copper wire of approved make varnishing the same and heating properly in heat chamber, re-assembling the alternator after replacement of ball bearing rusted nut and bolts and install the same to the existing position and apply 2 coat of synthetic enamel paints after successfully repairs and testing complete as specified and directed. Note:- (i) Contractor will provide labour, machinery , tools, crane, transportion required.(ii) All parts will be measured and paid separately under relevant items as apended in item No 107 to item No 118 below (iii) Fixing charges of parts/spares are incl in quoted rates.
Material for rewinding Copper wire for stator/field of existing gauge .
Supply only 'F' class insulation paper
Supply only 10 No size insulation sheet
Supply only Glass paper
Supply only Cotton tape
Supply only Varnish
Supply only main connection wire 50 sqmm copper single core
Supply only Copper thimble
Supply only Sleeve 'F' class
Supply only Ball bearing 6310
Supply only field insulation 'F' class
Supply only suitable diode assembly
Material and Labour for dismantling of Exhaust pipe of silencer, cleaning of silencer to remove carbon deposit inside exhaust pipe and refixing including replacement of worn out rubber gasket packing and nut,bolts including replacement of asbestos rope 20mm complete all as specified and as directed.
Material and Labour for spray painting to Panels, Enclosure of DG sets, fire stand post duct plates etc at DG installations with two coats of synthetic enamel paint of approved colour after making the suface free from oil/grease/rust and applying a coat of red oxide primer complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep in loose/soft soil and getting out for underground cable/erection of poles, stays , trench etc complete all as specified and as directed.
Material and Labour for sand cushioning for cable with river washed sand and punning to provide required cover as per SSR part I complete all as specified and as directed.
Supplying and laying bricks common burnt clay sub class 'B' old size for cable protection complete all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick layers complete all as specified and as directed.
Removal of excavated material not exceeding 50 metre away and depositing where directed at a level not exceeding 1.5 metre above from starting point complete all as specified and as directed.
Supply and laying, connecting and testing XLPE underground cable insulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 50 sqmm 3.5 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc complete all as specified and directed. Note: (i) Earth work, removing, returning filling and pipe will be measured and paid separately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments , machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.
Description all as per Item Ser No 126.0 here in before but for 3.5 core 70 Sqmm complete all as specified and directed.
Material and Labour for opening of underground sludge sump of size 5.00x 3.00 x 10.00 metre depth of capacity 480 KLD, removal of settled sludge, cleaning the sewage from walls / ceiling etc. to the entire satisfaction of Engineer-in-Charge complete as specified and directed.
Material and Labour for cleaning of grit chamber of size 1.00 x 18.00 x 0.50 metre depth, removal of settled sludge, cleaning the sewage from walls/ ceiling etc. for the entire satisfaction of Engineer-in-Charge complete all as specified and directed.
Material and Labour for opening of underground secondary clarifier ditch 8.00 metre dia x 3.75 metre depth, removal of settled sludge, cleaning the sewage from walls/ ceiling etc.to the entire satisfaction of Engineer-in-Charge complete all as specified and directed.
Material and Labour for opening of underground oxidation ditch 36mx6mx2.5mtr depth, removal of settled sludge, cleaning the Sewage from walls/ ceiling etc. complete all as specified and as directed by the Engineer-in-Charge complete all as specified and directed.
Material and Labour for opening of underground return sludge tank of size 1.50 m dia x 5.00 m depth, removal of settled sludge, cleaning the sewage from walls/ ceiling etc. complete all as specified and as directed.
Removal of sludge from dry bed of size 10x5x1.50mtr depth, removal of settled sludge, cleaning the sewage from walls/ ceiling etc. , complete all as specified and as directed.
Material and Labour for opening of underground sump of size 5.00 m dia x 12.00 m depth, at sewage booster installation, removal of settled sludge, cleaning the sewage from walls/ ceiling etc. complete all as specified and as directed.
Taking down carefully electrically operated clarifier mechanism with complete accessories form ditch 8m dia and 5 mtr depth and repair/replacement of damaged periphery MS strip (rail) of size 150mm wide 6mm thick and 34 mtr length and re assemble the complete accessories of the mechanism such as aerator cylindrical rotor of capacity 480 KLD x 300 RPM, etc including turning balancing and alignment of mechanism made fully functionable by replacement of unserviceable item carbon brushes of motor bearing of clarifier, in CM (1:4) cement plaster 15mm thick to periphery where required including assembling completed all as specified and directed.
Collection of the water sample from the STP duly sealed by the Engineer- in - Charge, carrying to the PHE UT Chandigarh/ Govt lab for testing, depositing it and collecting the test report from the lab & deposited with the department complete all as specified and directed.
Taking out self priming non clog submersible motor/pump set after removal of electrical connections, disconnecting suction/ delivery pipeline connection, from sewage well upto 6m depth and transportation to workshop for repair & vice versa. Refixing after carrying out repair /rewinding of submersible pump set electrically driven by 3 phase 415 volts capacity 7.5 HP complete all as specified and directed. NOTE:- Repair / spare parts shall be measured & paid for separately under supply only from item No 138 to 143.
Rewinding of non clog motor 5 HP.
Repairing to rotor shaft,welding,turning for proper bearing size.
Supply only Bush of existing size
Supply only ball bearing of existing size
Supply only Carb seal set
Supply only packing sheet, "O" ring, water seal etc
Material and labour for disconnecting the 3 phase electric motor from the sewage area, dismantling the motor, taking out the burnt winding of stator of motor, removal of burnt insulation material from the slots, cleaning the stator slots and preparation for rewinding the same. Material and labour for winding the stator of motor 2HP with proper insulated copper wire of standard size and superior quality as per the existing turns & gauge including all insulating materials , sleeves , cotton tapes etc and incl varnishing ,drying etc to get the proper RPM and torque refitting the motor at original position , making all electrical connections complete all as specified and directed.
Material and labour for relacement of old butterfly valve 65mm complete all as specified and directed.
Dismantling of existing activated carbon filter with pipes and all accessories for repair and reinstall the same after repair.The repair includes the repair of the following;- (a) Frontal Pipe Manifold, ECMS 2 ½” Size complete. (b) Internal Distributors inlet & outlet Prefabricated ECMS Pipes 3” size complete. (c) Repair & Epoxy Painting of Main Shell complete (d) Removal of old Media & Dismantling of existing ACF (e) New Activated Carbon Filter Media complete. (f) Refilling & Startup complete.
Supply and laying GI pipe medium grade 80mm dia with all fittings laid in trenches/fixed along with walls or laid under floors, complete all as specified and directed. Note :- Excavation & earthwork shall be measured and paid separately.
Note: The total amount shall subject to adjustment of credit of Rs 47366.00 for old Materials as per Schedule of Credit
POWER TECH ENGINEERS (BID ID -3339989)
Jai Maa Electrical Works (BID ID -3355251)
M/s A.S. ENGINEERS (BID ID -3341073)
GS Engineers (BID ID -3355443)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .