Shifting of 33KV, 11KV and LT line due to Road Widening work from Komtalpeta-Muniguda-Tumbiguda (SH 5) from location Therubali Square to Maudiguda in the Dist. of Rayagada.

WPB 160x152 (30.44KG/Mtr.),13 mtr- with base plate 300x300x12

33KV F clamp

33KV V cross arm(22Kg),GI

GI Back Clamp for V cross arm(33KV)(1.7 kg each)

Disc insulator(B&S)90 KN polymer

HW fitting(B&S) 90 KN,4 bolt

34 KV pin insulator polymer

100x50x6mm GI channel for straight Cross arm 1.8mtr(1.5Mtr+0.3Mtr)(Cut point pole- 4Nos)

HT Stay Set complete

7/10 SWG GI Stay wire , Grade-2

Stay Insulator

HT Stay Clamp (1.9 Kg / Pair)

Earthing Coil

6SWG GI Wire for earthing

148 mm sq. AAA Conductor

PG clamp for 148 mm² AAA conductor

GI Nuts & Bolts of Assorted size

GI Barbed wire (Anti climbing device@3Kg. Per support)

Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (4x0.59x0.510)

Danger Board

Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 1 no's = (1x0.59x0.510)

Sundries (Pole Numbering, Zebra Paintinig, Binding wire etc)

WPB 160x152 (30.44KG/Mtr.),13 mtr- with base plate 300x300x12

Disc insulator(B&S)90 KN polymer

HW fitting(B&S) 90 KN,4 bolt

34 KV pin insulator polymer

HT Stay Set complete

7/10 SWG GI Stay wire , Grade-2

Stay Insulator

HT Stay Clamp (1.9 Kg / Pair)

Sundrise (Pole Numbering, Zebra Painting and other accessories etc)

13 Mtr long 160X152mm WPB pole(30.44KG/MTR)(395.72KG)GI

Earthing of support (coil type)

6SWG GI Wire for Earthing

Top Pressure Channel 100x50x6 mm 3.5 mtr long 2Nos for top channel (@9.2kg/mtr) (Galvanized)

AB Switch mounting MS Channel (100x50x6)mm 3.5 mtr long 2 Nos (@9.2kg/mtr)(Galvanized)

MS Channel 75x50x6 mm 3.5 mtr long 2Nos for bracing at DPs @6.8 Kg/mtr(Galvanized)

MS Angel 50x50x6mm 4.5mtr long 2Nos for cross bracing of DPs @4.5Kg/mtr(Galvanized)

AB Switch (33 KV, 400A, 3-Pole, 50 Hz)

33KV Disc Insulator (B & S) 90KN Polymer

Hard Ware Fitting (B & S) 90 KN, 3 bolt

HT stay set complete

HT Stay insulator

HT Stay Clamp(1.9 Kg/Pair)

7/8 SWG G.I. Stay wire , Grade-2

40mm nominal bore G.I. pipe (medium guage ) earthing device with 3 mtr long

G.I. Flat (25x6) mm @ 1.2 Kg/Mtr

Red Oxide Paint

Aluminium Paint

Black Paint

G.I. barbed wire @3KG Per Pole

Danger Plate

GI Nuts & Bolts of Assorted size

Sundries (Aluminium binding, tap ,etc)

11 Mtr long 160X152mm WPB pole

Earthing of support (coil type)

No.8 GI Wire (dia 4.6mm) 0.131Kg / Mtr 2Mtr for connecting pole with coil earthing

Top Pressure Channel 100x50x6 mm 2.8 mtr long 2Nos for top channel (@9.2kg/mtr) (Galvanized)

MS Channel 75x40x6 mm 2.8 mtr long 2Nos for bracing at DPs @6.8 Kg/mtr(Galvanized)

MS Angel 50x50x6mm 3.5mtr long 2Nos for cross bracing of DPs @4.5Kg/mtr (Galvanized)

11KV Disc Insulator (B & S) 45KN Polymer

Hard Ware Fitting (B & S) 45 KN, 3 bolt

Fish Plate 50X8 mm., 3.14kg/Mtr., each 0.280 mtr. Length

HT stay set complete

HT Stay insulator

HT Stay Clamp(1.9 Kg/Pair)

7/8 SWG G.I. Stay wire , Grade-2

Black Paint

G.I. barbed wire @3KG Per Pole

Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (4x0.59x0.510)

Danger Plate

Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 1 no's = (1x0.59x0.510)

GI Nuts & Bolts of Assorted size

1C x 300 mm² 11KV XLPE Cable(Armoured),A2XFY (70X4)

Heat shrinkable jointing kit for 1Cx300 mm² 11KV XLPE Cable(outdoor type)

Clamp for pipe

Lightning Arrester(12 KV,10 KA) Station Class

GI pipe Earthing 40mm dia mediun gauge 2.5mtr long

25X3 mm GI Flat, 0.6Kg/Mtr, 15 Mtr per earthing

Sundries

11 Mtr long 160X152mm WPB pole

11KV F Clamp 2.9 kg each

11KV V Cross arm (10.2 Kg each)

G.I. Back clamp for V cross arm (11 KV) 0.85 each)

Disc Insulator (T&C) 45KN Polymer

Hardware (T&C) 45 KN

11 KV Pin Insulator Polymer

100x50x6mm GI channel for straight Cross arm 1.2Mtr &0.3Mtr (9.2Kg/Mtr)

HT Stay Set complete

7/10 SWG GI Stay wire , Grade-2

Stay Insulator

HT Stay Clamp (1.9 Kg / Pair)

Earthing Coil

6SWG GI Wire for earthing

80 mm sq. AAA Conductor

PG clamp for 80 mm² AAA conductor

GI Nuts & Bolts of Assorted size

GI Barbed wire (Anti climbing device@3Kg. Per support)

Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (4x0.59x0.510)

Danger Board

Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 1 no's = (1x0.59x0.510)

Sundries (Pole Numbering, Zebra Paintinig, Binding wire etc)

Stay concreting in ratio 1:2:4 (0.5x0.5x0.8)mtr .

Concreting of poles in ratio 1:1.5:3 (500mmX500mmX1800mm) = 0.44Cu.mtr

Concreting of poles in ratio 1:1.5:3 (500mmX500mmX1800mm) = 0.62Cu.mtr

Couping of poles in ratio 1:1.5:3 (500X500X475)= 0.11875 Cu mtr

Material for earthing including masonary work for earth pit, and cement plate cover including salt, Charcoal etc.

Dismantling of 11/13 Mtr. Joist/WPB Pole- 150X150 mm/ 160X160 mm (Serviceable Pole) after digging the pit and taking out the pole, transportation and stacking the pole at a proper place in safe position within 10km /site store and refilling the pit with loose earth and ramming including removal and disposal of malba at proper location as per instruction of EIC.

Dismantling of ACSR/AAAC 80/100 mm2 from overhead line, recoiling, loading, transportation, unloading and staking at a proper place in safe position/site store

Dismantling of Steel Structure ( Angle/ Channel/ Flat) and Nuts and Bolt including loading, transportation, unloading and staking of dismantled material at a proper place in safe position/BA site store

Supply & Laying of PIPE HDPE 110MM DIA PN8 , PE 80 through HDD method .Scope of work also includes making Trenchless ducts with 110 mm Dia HDPE pipe casing using HDD machine including supply of HDPE pipe as per IS 4984

Supply & Laying/Mounting and fixing of HDPE Pipe -110 mm Dia ( PN-8,Grade PE-80)and sealing of the same for LT/HT Cables. Scope also includes providing and laying all required consumable etc. for collar fixing and sealing of Pipe. (Excavation is excluded)

Supply and Installation of cable Route marker including transportation from site/tent, excavation, refilling, disposing of malba, flooding with water, ramming/compacting of foundation as per standard specifications and drawing.

Excavation of cable trench length (3 mtr W X 3 mtr D) by providing all necessary tool, Manpower, pump etc suitable for HT & LT Cable laying. Scope also includes supply of neccessry barricades at the excavation site.

Provide all necessary Manpower, Tool, Tackles, Barricades, Dewatering pump, Gunny bags,Compressor for excavation (3 mtr W X 3 mtr D) in Hard Surface.

Back fill the cable excvation site with same earth (3 mtr W X 3 mtr D). Scope also includes provide of necessary Tools,Machinery & Manpower for the activity.

Supply all materials required for backfilling and has to carry out the job of backfilling with sand, as per DISCOM Standards

PCC (1:3:6(M-10 Grade)) below trench (Length 2800 mm, width 2800mm, thickness 75mm throughout)

Brick work Both Sides(2.8 mtr. L X 0.19 mtr W X 0.5 mtr D) with F.P.S. bricks of class designation 75mm in Cement mortar 1:4 (1 Cement : 4 Coarse sand) as per standard specifcation. Scope includes supply of all material

15 mm cement plaster, All Sides (2.83+0.21 mtr. L X 0.5 mtr W) on the rough side of single brick wall of mix -1:4 (1 Cement : 4 Fine sand (50 % fine :50% coarse)) as per standard specification. Scope includes supply of all material.

Supply and erection of material for RCC partition slab 800mmx250mmx75mm (M-25 grade)- 12 Nos. with supply of all civil material (Cement, Sand & 10 to 12mm stone aggregate), with 8mm dia R/f cutting & bending etc. N:B:. Salvage Value @8% to be deducted from the contractor's bill.

Please Enable Macros to View BoQ information