Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹24.0 L+₹1.0 L (4.51%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹28.5 L+₹5.5 L (23.8%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | Rejected-Technical | - | Rejected-Technical Requisite documents not submitted |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
28 Oct 2020, 6:00 pmClosed
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
REPAIR MAINT AND REPLACEMENT OF CI GI PIPE LINES WITH CONNECTED FITTINGS AND FIXTURES OF OTM MD ACCN FOR OFFRS AND JCO OR AND ALLIED WORKS AT SI LINES UNDER GE BHOPAL
2020_MES_382714_1
8720/E8
Open Tender
Pipe Laying Works
Item Rate
274 days
BHOPAL
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
Yes
GE BHOPAL
₹60,000
Yes
12 Dec 2020
1 Oct 2020
30 Oct 2020
1 Oct 2020
28 Oct 2020
15 Oct 2020
Amount
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, for laying/taking out CI/GI pip lines, valves, etc and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, for laying/taking out CI/GI pip lines, valves, etc and getting out in hard/dense soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.
Removing excavated materials (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M&L for Providing cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in filling the cut road or making pillars etc for supporting pipe in trenches complete all as specified and directed.
Taking up / down existing, cast iron pipe lines / water mains of any description / grade and in position including fittings, accessories and fixtures etc existing in between pipe line, by taking out and opening any type of joints (Tyton /Gasket / Lead joints) complete all as specified and directed by the Engineer-in-Charge for following bore of pipes:- NOTE : (i) While taking out of water main existing lead shall be recovered by burning out joints carefully from the existing joints of the water mains which shall be sold to the contractor under schedule of credit (ii) Old CI pipe / fittings retrieved in serviceable condition from taking down shall be reused in the work as approved by the Engineer-in-Charge.
80mm bore
100 mm bore
150 mm bore
Laying only in trenches, spigot and socketed cast iron pipes of any description / grade and in any position, as obtained from taking up or down, after making necessary addition / alterations and properly cleaning the pipes internally and externally, drawing out foregin material/rust, etc for the following sizes complete all as specified and directed :- NOTE:- (i) Earth work, Joints and CI specials/ fittings of the pipes shall be measured and paid for separately under appropriate item of BOQ/Schedule `A'. (ii) Old CI pipe / fittings retrieved in serviceable condition from taking down shall be reused in the work after proper cleaning(externally & internally) .
80mm bore
100 mm bore
150 mm bore
Supply & laying in trenches ductile iron pipe with push on joint class K-7 conforming to IS 8329 (centrifugally cast spun ductile iron pressure with spigot end with cement mortar linening inside) in any length for 80 mm bore pipe including jointing and testing complete all as specified and directed.
Supply & laying in trenches ductile iron pipe with push on joint class K-7 conforming to IS 8329 (centrifugally cast spun ductile iron pressure with spigot end with cement mortar linening inside) in any length for 100 mm bore pipe including jointing and testing complete all as specified and directed.
Supply & laying in trenches ductile iron pipe with push on joint class K-9 conforming to IS 8329 (centrifugally cast spun ductile iron pressure with spigot end with cement mortar linening inside) in any length for 150 mm bore pipe including jointing and testing complete all as specified and directed.
Cutting CI/DI pipes in position for insertion of new tees, branches, etc for the following sizes complete all as specified and directed :-
80mm bore
100 mm bore
150 mm bore
S&F cast iron bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, ‘Y’ junction, double branch, cross (all sockets or socket & spigot or flanged) collars, caps and plugs for spigot socketed pipes upto 150mm bore complete all as specified and directed. [MAKE:-ELECTROSTEEL / KAPILANSH / NECO / KEJRIWAL as approved by GE]
M&L for making a pair of flanges in any existing pipeline of following bore pipes including making threads on both ends of pipes and on other end of flanges with complete joints including fibre /neoprene rubber gasket,nuts,bolts washer etc for the following sizes complete all as specified and directed :-
80mm bore
100 mm bore
150 mm bore
M&L for push on flexible rubber gasket (Tyton) joint suitable for ductile iron pressure pipes for water mains and pipe fittings with spigot and socketed ends for the following sizes complete all as specified and directed :-
80mm bore
100 mm bore
150 mm bore
M&L for making joint with rubber or fibre board gasket for the following sizes complete all as specified and directed :-
80mm bore
100 mm bore
150 mm bore
M&L for run lead joint for spigot and socketed end CI/DI/GI pipe & fittings including necessary excavation, returning refilling complete for the following sizes complete all as specified and directed :-
80mm bore
100 mm bore
150 mm bore
Taking out old unserviceable Sluice valve and Supply, installation, fixing, jointing and testing, of approved quality cast iron flanged sluice valve of class 1.6 PN, long body, ISI marked (IS-14846) with stainless steel spindle and hand wheel including nuts, bolts, rubber gasket, etc complete of following size:- [MAKE:- KIRLOSKAR / LEADER / L&T as approved by GE]
80mm bore
100 mm bore
150 mm bore
Taking out sluice valve top cover, spindle and broken / unsv check nut (gutka); removal to workshop & refixing of sluice valve parts after servicing / maintenance /grinding / cleaning / threading / greasing work to sluice valve parts, including replacment of gland packing, rubber sheet, nuts, bolts, spindle, check nut and washer, etc as required; and reassembling the sluice valve and testing complete all as specified and directed of following size:- NOTE :- Replacement of the spindle shall be measured and paid for separately.
80mm bore
100 mm bore
150 mm bore
M&L for replacement of brasss spindle PN 1.0 with check nut of existing type & size, including grinding , threading , machning of gun metal gate complete complete all as specified and directed of following size:-
80mm bore
100 mm bore
150 mm bore
M&L for Brick work with sub class ‘B’ bricks (Modular), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 including demolition of old brickwork where ever required complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for cocking of run lead joint for spigot and socketed pipes and fittings including reqired necessary excavation, returning &filling complete all as specified and directed for following size:-
80mm bore
100 mm bore
150 mm bore
Drilling and tapping cast iron water mains (in position) by turning off water for branch connections of the internal dia 15mm GI pipe complete all as specified and directed.
Drilling and tapping cast iron water mains (in position) by turning off water for branch connections of the internal dia 20mm GI pipe complete all as specified and directed.
Taking up or down steel tubing and connections from trenches / walls / floors / ceilings, etc including cleaning (tubings only and not connections) for refixing for the following sizes complete all as specified and directed :-
100 mm bore
80 mm bore
50 mm bore
40mm bore
25mm bore
20mm bore
15mm bore
Refixing old steel tubing with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) for the following sizes complete all as specified and directed :-
100 mm bore
80 mm bore
50 mm bore
40mm bore
25mm bore
20mm bore
15mm bore
S&F Steel water tubes, medium grade, ISI marked, galvanised with all fittings, fixed to walls and ceiling or laid in floors/trenches for the following sizes complete all as specified and directed :- [MAKE:-TATA / JINDAL / PRAKASH / SWASTIK as approved by GE]
80 mm bore
50 mm bore
40mm bore
25mm bore
20mm bore
15mm bore
S&F PVC float valve high pressure of PTMT with epoxy coated aluminium rod & hight density plastic ball complete screwed for iron pipe or brass furred and fixed with fittings such as (socket, nipple, union) etc for iron pipe for the following bores including taking out old unserviceable valve complete all as specified and directed:- [MAKE:-Prayag as approved by GE]
20 mm bore
25 mm bore
S&F Rotational moulded (three layered), polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes including taking down old tank any type complete all as specified and directed. [MAKE:-SINTEX / POLYWELL / ROTAX/ JS POLYPLAST / POLYCON as approved by GE]
S&F Rotational moulded (three layered), ISI marked polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position including connecting up pipes including taking down old tank complete all as specified and directed. [MAKE:-SINTEX / POLYWELL / ROTAX/ JS POLYPLAST / POLYCON as approved by GE]
Disconnecting existing water tanks of capacity upto & including 500 litres, setting aside (or lowering if required) for repairs including making it leak proof using M-Seal or other approved products, replacemnt of barrel nipple, cleaning, etc and hoisting, if required, reconnecting and refixing in position (cleaning, repairing etc to be measured separately) complete all as specified and directed. NOTE: Tanks which can not be repaired shall be sold to contractor under schedule of credit.
Disconnecting existing water tanks of capacity above 500 litres and upto 1000 ltrs, setting aside (or lowering if required) for repairs including making it leak proof using M-Seal or other approved products, replacemnt of barrel nipple, cleaning, etc and hoisting, if required, reconnecting and refixing in position (cleaning, repairing etc to be measured separately) complete all as specified and directed. NOTE: Tanks which can not be repaired shall be sold to contractor under schedule of credit.
Fixing only Rotational moulded, polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes including taking down old tank any type and depositing to MES store complete all as specified and directed. [Water tank shall be issued under Schedule ' B' free for fixing"]
Fixing only Rotational moulded, polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position including connecting up pipes including taking down old tank any type and depositing to MES store complete all as specified and directed. [Water tank shall be issued under Schedule ' B' free for fixing"]
S&F in replacement PVC Tank Lid (Cover) for tank of 500 Ltr capacity including locking arrangement with pad lock of Godrej size 50 mm (steel) comlete all as specified and directed.
S&F in replacement PVC Tank Lid (Cover) for tank of 1000 Ltr capacity including locking arrangement with pad lock of Godrej size 50 mm (steel) comlete all as specified and directed.
S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe for the following bores including taking out old unserviceable valve complete all as specified and directed :- [MAKE:-SANT / LEADER / RAMCO / ZOLOTO as approved by GE]
50 mm bore
40 mm bore
25 mm bore
20 mm bore
15 mm bore
M&L for MS Clamp connection of thickness minimum 6mm suitable for 100 to 250 mm dia CI pipe complete all as specified and directed.
M&L for repair to joint leakage of 15/20/25/40/50 /80 & 100 mm bore pipe line including supply and fixing new GI fitings (ISI marked) and other accessories as required at site complete including excavation and earth work complete all as specified and directed :-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
100 mm bore
Cleaning and removing all scale and dirt, using bleaching powder, etc from water tanks and from mouth of circulating pipes, etc of capacity not exceeding 500 litres complete all as specified and directed.
Cleaning and removing all scale and dirt, using bleaching powder, etc from water tanks and from mouth of circulating pipes, etc of capacityabove 500 litres upto 1000 ltrs complete all as specified and directed. Note (FOR BOQ Serial Item Nos. 40.01 & 40.02):- (i) Any damage to to tank during cleaning process shall be the sole responsibility of the contractor and he will have to get it reapired/replced without any extra cost to the department. (ii) The outlet of tank shall be blocked using cotton waste before cleaning of the tank to avoid blockage of outlet pipes. (iii) All care shall be taken by the contractor to avoid blockage of pipes after cleaning of tank, air lock of pipes, etc if any shall be removed immediately. (iv) Users signature shall be obtained for each tank cleaned.
S&F cast iron non return (Reflux) valve with flanged ends Non Return with GM working parts IS - 5312 heavy duty, drilled for bolts, including necessary rubber gasket joint complete with nuts and bolts for the following sizes including taking down the old unserviceable valves complete all as specified and directed :- [MAKE:-SANT / LEADER / RAMCO / ZOLOTO / AARKO PIPE GRAM UDYOG as approved by GE]
150 mm bore
100 mm bore
80 mm bore
Dismantling Old valve pit complete with deteriorated MS cover and Construction of brick massonry valve pit chamber of inner dimension 100x100x100 cms suitable for sluice valves upto 100mm size, with PCC 1:4:8 type D-2 for foundation, brick work in cm 1:6 rendering 1:4, 15mm plastering, coping in PCC 1:2:4 type B-1, incl necessary earth work, including MS sheet cover of thickness 3.15mm on 50x50x6.0 mm angle iron framework including two coats of synthetic enamelled paint over a coat of red oxide primer with making provision of locking arrangement, complete all as specified and directed
Ditto as per item No 42.00 above but of size 50x50x50 cm suitable for valves upto 50 mm dia, complete all as specified and directed.
S&F Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in Cast Iron Water supply mains of size 150 mm dia.complete all as specified and directed. [MAKE:-SANT / LEADER / RAMCO / ZOLOTO / AARKO PIPE GRAM UDYOG as approved by GE]
Deduct Schedule of credit (calculation will be done off line) Rs. 297655.00
Neelam Traders
RAJPATI CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .