Improvement to Lokaseva Bhavan, Bhubaneswar such as Construction of Prefabricated Annex Office Building for C.M Block at 3rd floor Roof top of RD Department, for the year-2025-26.

Picking out old damaed Terraced from Roof top including removing the debris away from the work site within 50m lead etc complete...as per the direction of Engineer in Charge

Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead etc complete. as per the direction of Engineer in Charge..

Fly Ash Brick masonary in cement mortar (1:6) in (S/S). including, watering, curing,cost of al materials and labour T&P etc complete.

Fly Ash Brick masonary in cement mortar (1:6) in (S/S). including, watering, curing,cost of al materials and labour T&P etc complete.

R.C.C. work in C.C.(1:1½:3)using 12mm size HGCB chips complete including cost of all materials and labour as per direction of the Engineer-in-Charge.

lintel

Providing M.S. Reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge including cost of all labour and materials etc complete.

C.C. work in C.C. (1:1½:3 )using 12mm size HGCB chips complete including cost of all materials and labour as per direction of the Engineer-in-Charge.

Supplying fitting and fixing of fabricating, assembling, hoisting, erecting and placing in position M. S built up Section/ Tubularstructure(M.S Round, Square or Rectangular Hollow tube)Trusses etc welded & bolted with special shaped with washer including cost, conveyance and taxes of all materials required for the work etc complete as directed by the Engineer-in-Charge.

Providing fitting and fixing of 18 mm thick Everest Multipro Cement Fiber board of sizes (4',0"x8,0") over base M.S Jally placed @ 600mm C/C by means of screews including all cost conveyance labour T & P etc complete. in all respect as per the direction of the Engineer in-Charge.

Providing fitting & fixing of BIRLA AEROCO 3000x600x75 mmPanel with GP Sheet C-Channel of size GP-75x40x4.80 mm of the panel as Horizontal member placed at top & bottom including cost of all materials, labours & T&P etc. complete.

Providing & fixing of double skinned partition with Aluminium section 9210 as Horizontal and vertical member placed @500mm c/c covered with 12mm thick WPVC Board (One side Covering) (with out any Pasting) with cost of all materials , labours & T&P etc. complete.

Supplying, fitting and fixing of Vitrified tile (Plain)) of sizes 600 mm x 600 mm in all floors and threads with an application of PMC adhessive bed of required thickness and filling the joints with white cement and approved pigments including all cost conveyance labour T&p etc complete.e.

Supplying and fixing of Precoated Galvanized iron profile sheet semi gloss of 1000 mm width & total coated thickness 0,50 mm with insulation in roof drilling hole in wind ties including fixing of ridges valley, wind ties etc. complete including cost of sheet & fittings etc complete..

supplying and fixing of 13 mm thick Aero Comfort sheet of0,5x13 XLPE ALUPET, AZ150 W 1060 WITH GUARD FILM Pasted under Colour profile sheet roofing with application of adhesive including cost of all labour and materials etc complete.

Supplying, fitting and fixing 110 mm dia P.V.C Rain water pipe of approved quallity from Roof top to down end including cost of all fittings and bends required for the work including cost of all labour and materials etc complete.

Providing fitting and fixing of UPVC (Unplasticised poly vinyle chloride) windows with 5mm clear float glass with two track L.G.profile as per approved specification including all cost conveyance labour T&P etc. complete.

Providing fitting and fixing of Single track white U.P.V.C.(Unplasticised poly vinyle chloride) as fixed Vent's with 6 mm thick toughen glass both side clear over Elite 67 series with as per approved specifications including the cost of all materials, necessary locking arrangements with all fittings including cost of all materials etc complete

Providing fitting and fixing of UPVC (Unplasticised poly vinyle chloride) Door /windows with 5mm clear float glass with two track L.G.profile as per approved specification including allcost conveyance labour T&P

Providing fitting & fixing of Roller blinds to the window as per approved design by using 50mm dia C.P handle with blind luck tilting cord, Nylon cord chain PC runner & providing approved etc including all cost conveyance labour T & P etc. complete as per the direction of Engineer in Charge.

Supplying fitting and fixing of Flush door shuter with 32mmBlock board & both side covered with 4mm thick veneer Sonear African Teak with melamine polish ,and fixing of Door closer, Mortise luck of Godrej make including all cost convevance labour T&P etc complete.,

Providing & fixing of 8 mm thick plain glass panes as per approved design with wooden beading including moulding polishing and drilling holes etc. including cost of all materials , labours &conveyance etc. complete.

Providing, fitting fixing of false celling with Hilux Range Acoustic Tile of Calcium silicate board of Size (595×595x8) mm (Round hole Perforated) with main runner, cross tee, wall angle with fine fissured RH-99 board on 4 walls to be fixed by means of steel screw PVC plug & the grid 2'-0" x 2'-0" suspended from ceilling etc complete with all material & all labour T&P etc

Providing, fitting, fixing up false ceiling of approved design and drawing in all floors with G.l Section on 4 walls to be fixed by means of steel screw and PVC plug and the G.l. grid 2'-0" x2'-0" to be suspended from ceiling by using Wallon Louvers of (2700 x 240) mm of 2799 Series (Treelam) including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.

Providing, fitting & fixing of premoulded decorative corner beading of Model No. C- 443 of GYPSUM INDIA LTD. having cross section demension 112 X 80MM & fixing the same etc complete.

Providing fitting and fixing of Cub-Board/File cabinet made up with 19mm BWR block board frame and both side covered with ,4mm veneers of approved shade Century golden cedere. The File Cabinet finished with D/L door system. The veener surface finished with two coats of melamine polish .The File Cabinet finished with all fittings & fixtures including all cost conveyance labour T&p etc complete.

Supplying, fitting and fixing of Computer table with 19mm BWR Block board and pested with both sides with 4mm thick veneers of approved shade to all exposed sides Back with 9mm BWR ply with side drawer and cup board with all fitting and fixtures of godrej make including tralee channel including cost of all materials and labour and all inside pested with 4mm thick veneer etc. & installed at site etc. complete.

Providing fitting and fixing of Foot Rest made up with 19mm block board & cover with 1mm thick Sunmica including all cost conveyance labour T&P etc complete.

Providing Cement based putty punning to walls including cost convayance and taxes of all materials and cost of all labour (T&P) etc. complete.

Providing Plastic painting two coat to interior wall surface with any approved shade of Plastic emulsion paint over a coat of primer in all heights including all cost conveyance labour T & P etc as per the direction of Engineer in charge

Wall painting 2 coats with Weather coat paints of approved shade over a coat of wall priming on wall surface to give an even shade including cost of brushes and putty including cost of paint scrapping, cleaning rubbing, scaffolding etc. in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.

Providing Red Oxcide Priming to M.S Iron works with including cost convayance and taxes of all materials etc. complete

Labour charges for removing old records, furniture and resetting the same after completion of work with all' labour & (T & P)required for the work etc. complete as per the direction of Engineer in Charge

ELECTRICAL WORKS

Recessed/ Surface wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic FRLS PVC conduit (Make:- precision) with 5Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on modular Metal box with modular base & cover of suitable size , MS box with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Anchor / Havells / V Guard )

Group-A L.P-15 F.P- C.B.P-

Group-B L.P-15 F.P- C.B.P-

Group-C L.P-15 F.P-04 C.B.P-03

Recessed/ Surface wiring to submain in 2 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic FRLS PVC conduit (make- Precision) along with 1 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire V-guard/ Havells/ Anchor )

Recessed/ Surface wiring to submain in 2 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic FRLS PVC conduit (make- Precision) along with 1 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire V-guard/ Havells/ Anchor )

Recessed/ Surface wiring to submain in 4 x 6 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic FRLS PVC conduit (make- Precision) along with 2 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire V-guard/ Havells/ Anchor )

Supply and fixing of superior type Ding Dong call bell / buzzer of ISI marked, conforming to IS-2268/ 1994 (Make-Cona/ Anchor or equivalent).

Ding dong call bell/ Buzzer with 4" x 6" MS board and cover.

Remorte Call bell with battery

Supply and fixing of 0.5Amp to 32A rating 240 V "C" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand / L&T/ ABB or equivalent).

6Amp rating to 32Amp (SP)MCB

32Amp rating (DP) MCB

Supply and Fixing of following rating 4 pole 415 V MCB of "C"in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required. (Make-HPL/ Havells/ Legrand / L&T/ ABB or equivalent).

40Amp 4Pole MCB

Supply and fixing of different type of light fittings.

Supply and Fixing of 15/ 16 watt recess LED cicular light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton or equivalent). as per the direction of Engineer-in-charge.

Supply and Fixing of 13watt LED mirror Light. (Make- Havells/ Phillips/ Bajaj/ Crompton or equivalent).

Supply and fixing of following fan.

Exhaust fan 9"/10" size with making hole of required size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton/ or equivalent). as per the direction of Engineer-in-charge.

Wall mounted fan 16" size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton/ Polycab or equivalent). as per the direction of Engineer-in-charge.

Supply of PVC armored cables ISI marked.(Make- Glowstar/ Polycab/ Nicco/ KEI as per letter No.309 19.01.2011 of SEEC (R&B) Odisha

25sq.mm 3 1/2 core

35sq.mm 3 1/2 core

Cable laying

Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm upto 400sqmm direct in ground in the existing RCCTrench /HUME/STONEWARE/METAL pipe as required.

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches including all connection. (Make-Great white/ Legrand / ABB/ Roma/ Havells/ HPL/ Cona or equivalent).

S/F of Multipurpose board consisting 2nos. 6Amp plug and switch with all connections. (Modular type) (Make-Great white/ Legrand / ABB/ Roma/ Havells/ HPL/ Cona or equivalent).

Supply and fixing of Modular switch, Socket, T.V Socket and Telephone socket etc. (Make-Great white/ Legrand / ABB/ Roma/ Havells/ HPL/ Cona or equivalent).

6Amp socket( Modular type)

16Amp switch (Modular type )

16Amp socket.(Modular type )

32Amp Modular DP switch

Supply and fixing of Modular metal box of following size (nominal size) on surface/Recess with suitable size of Modular cover in front including cutting the wall and making good the same in cases of recessed conduit as required (Modular box + cover+ fixing + Labour cess) (Make-Great white/ Legrand / ABB/ L&T/ Roma/ Havells/ HPL/ Cona or equivalent).

4 Modulee

S/F of multipurpose board Modular 6A 3nos. Switch and 3nos. Socket and 1no. Switch and socket 15A on Modular board and cover. (Make-Great white/ Legrand / ABB/ Roma/ Havells/ HPL/ Cona or equivalent).

Supply and Laying of 2.5sqmm 3core PVC insulated round flexible copper cable. (make - Polycab/ kEI/ Gloster)

Supply and Laying of 4sqmm 3core PVC insulated round flexible copper cable. (make - Polycab/ kEI/ Gloster)

Supply and Laying of 32mm dia HDPE pipe. (Make- Supreme/ Astral/ Sudhakar)

S/F of 6way TPN DB box. (Make- L&T/ Legrand/ ABB)

Supply and Fixing of 2nos. 6Amp switch and 3 nos 6Amp Socket Fixed on Modular G.I. Box with Cover including all accessories and connections. (Modular type) (Make-Great white/ Legrand / ABB/ Roma/ Havells/ HPL/ Cona or equivalent).

Supply and Laying of 25mm size PVC pipe. (Make-Sudhakar/ Astral/ Precesion)

Supply , Installation, Testing, commissioning and charging of 100Amp indoor wallmounting Panel box. (size:- 34"x 32" x 10") For E.I. Incoming;- (i) 100Amp 4pole (36KA) MCCB with spreader terminal and rotary handle.- 1set (Make- L&T/ Legrand/ ABB) (ii)Copper Bus-bar, MF meter & CT coil. Outgoing:- (i) 63Amp 4pole MCB -4 nos (Make- L&T/ Legrand/ ABB) (ii) 32Amp DP MCB -2 nos (Make- L&T/ Legrand/ ABB)

Supply , Installation, Testing, commissioning and charging of 63Amp indoor wallmounting Panel box. (size:- 30"x 30" x 10"). For A.C. machines Incoming;-

(i) 163Amp 4pole (36KA) MCCB with spreader terminal and rotary handle.- 1set (Make- L&T/ Legrand/ ABB) (ii)Copper Bus-bar, MF meter & CT coil. Outgoing:- (i) 32Amp DP MCB -6 nos (Make- L&T/ Legrand/ ABB)

Supply of 2 ton split type A.C. machine . (Make- Carrier/ Voltas/ Hitachi)

Installatoin charges for split A.C. machine.

S/F of Extra copper pipe.

S/F of Drainage Pipe.