Urgent replacement of 12.5HP 9.33 KW Monoblock Pumps Panel board and Construction of new foundation at Curtorim market VP Curtorim in Curtorim Constituency

Supplying, Installation, Testing and Commissioning of 12.5 HP/9.3 K.W Monoblock booster pumps of model KDT-1372+ of Kirloskar or equivalent make, 3 phase 415V, 2900 rpm, suction/delivery pipe of 65mm x 65mm, discharge 25.20 c.um/h /7.0 LPS, head range 34 to 72 meter.

Construction of new foundation for installation of new 12.5 HP Monoblock booster pump as per the standard base frame provided to pump. The foundation to be provided as per the space availability and site condition work involves dismantling/demolition of existing pump and foundation, excavation, rubble packing, P.C.C, centering shuttering, plan concrete (1:1.5:3), any structural frame work, etc. accessories required to install new pumps on the foundation such as packing, nut bolts, foundation anchor fastener etc. the work to be carried out as per the direction of Engineer In Charge.

Supply, Installation, Testing and Commissioning of indoor type LT main panel board suitable for 12.5 HP motor pump sets with all accessories like Star/delta starter, suitable provision for three phase departmental energy meter and sealing arrangement. The panel made up of 16/14 SWD CR sheet fabricated panel duly power coated in Siemens grey shade and mounted on suitable size MS angle frame and installed on the floor firmly using cement concrete or anchor fastener nut bolts etc. a) 40 Amps 3P MCB for Incomer. 1.0 No b) 32 A 3P MCB for Starter. 2.0 No c) 25 Amps 3P Contactors. 6.0 No d) 9-15 Amps Over Load Relay. 2.0 No e) Timer for Star/Delta. 2.0 No f) Volt meter Digital with VSS. 1.0 No g) Ammeter Digital with ASS. 1.0 No h) CTs for Ammeter. 3.0 No i) RYB Indicator set. 3.0 No j) ON/OFF Indicator set. 2.0 No k) ON/OFF Push button set. 2.0 No l) 5 KVAR Capacitor. 2.0 No m) 16 Amps MCB for Capacitor. 2.0 No n) 18 Amps 3P contactor for Capacitor. 2.0 No o) Dry run protection. 2.0 No p) Selector Switch. 1.0 No

Providing and installation of diaphragm mechanical pressure gauge of 50mm dia dial size on to suction and delivery pipeline with all suitable fixtures. All as directed by the Engineer in charge.

Supplying at store or site of work including freight transit insurance carting loading unloading stacking etc. Ductile Iron double flanged manually operated Sluice valve generally confirming to IS 14846-2000 non rising spindle type (soft seated) resilient seated with Body Bonnet of Ductile Iron of grade GGG40 or SG 400/12 400/15 500/7 or equivalent grade as per IS 3896 part 2-1985 and subsequent revisions Wedge fully rubber lined with food grade EPDM( WRAS approved) and seals of NBR spindle stem SS/AISI 410 and having glandless operation. The valve should be vacuum tight 100% leak proof with face to face dimensions as per IS14846-2000 or BS 5163-89 or DIN 3202-F4. The valves shuld be coated with electrostatic Powder/ Epoxy Coating on both inside and outsideminimum 250 microns thickness of blue color RAL5017/5005 suitable for drinking water and shall have pocket less body passage. The flanges shall be Drilled as per IS: 1538 with latest amendments. The valve shall be supplied with Hand Wheel for operation (by-pass and gear arrangements for sizes above 400mm dia) and relevant Test & Guarantee certificates. TYPE P.N. 1.6 (Class A);Nominal Diameter in mm;50

Supplying at store or site of work including freight transit insurance carting loading unloading stacking etc. Ductile Iron double flanged manually operated Sluice valve generally confirming to IS 14846-2000 non rising spindle type (soft seated) resilient seated with Body Bonnet of Ductile Iron of grade GGG40 or SG 400/12 400/15 500/7 or equivalent grade as per IS 3896 part 2-1985 and subsequent revisions Wedge fully rubber lined with food grade EPDM( WRAS approved) and seals of NBR spindle stem SS/AISI 410 and having glandless operation. The valve should be vacuum tight 100% leak proof with face to face dimensions as per IS14846-2000 or BS 5163-89 or DIN 3202-F4. The valves shuld be coated with electrostatic Powder/ Epoxy Coating on both inside and outsideminimum 250 microns thickness of blue color RAL5017/5005 suitable for drinking water and shall have pocket less body passage. The flanges shall be Drilled as per IS: 1538 with latest amendments. The valve shall be supplied with Hand Wheel for operation (by-pass and gear arrangements for sizes above 400mm dia) and relevant Test & Guarantee certificates. TYPE P.N. 1.6 (Class A);Nominal Diameter in mm;100

Supplying at store or site of work including railway freight carting loading unloading stacking etc. Cast Iron double flanged single door swing non-return valve generally conforming to IS:5312 part-I having body door cover in graded cast iron to IS:210 Gr. FG 200 body Ring in leaded tin bronze IS 318 GR LTB2 and door ring in natural rubber & bearing block of leaded tin bronze to IS:318 Gr. LTB 2 ( 350 mm & above ) hinge pin of stainless steel AISI 410 Flanges drilled to IS:1538 Table 4 & 6 TYPE P.N. 1.6 (Class A);Dia in mm;50

Construction of masonry chamber 90 x 90 x100 cm inside in 40kg/sq. cm laterite masonary in neatly dressed stones complete with 23 cms wall thickness and in cement mortar 1:4 ( 1 cement : 4 coarse sand) for sluice valve of sizes 100 mm 120 mm 150 mm and 200mm dia with necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing . (rate is inclusive of rate earthwork excavation cost of surface cover and all other materials and labour and as per details below);with M.S. sheet cover with 6 mm thick M.S. plate and frame of Angle iron 5050x6mm in 120 mm thick RCC slab cover in cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone ballast 20 mm nominal size)

Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming V edge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete;With 10 mm -12 mm thick plate;Tees bends reducers

Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming V edge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS:3589-1991 including freight etc. complete;With 25 mm thick Plate;Flanges