Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹4.9 Cr
EMD Value
₹4.9 L
Closing Date
20 Jun 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Package No. GAJ-001-NHM(C) Construction of Day Care Building at different locations under National Health Mission in the Gajapati district of Odisha
NBCC/ODISHA/ZO/NHM/NIT/23-24/049
NBCC/ODISHA/ZO/NHM/NIT/23-24/049
Open Tender-Domestic
Civil Works General
Gajapati, Odisha
₹11,800
₹4.9 L
20 Jun 2023
9 Jun 2023
20 Jun 2023
20 Jun 2023
23 Jun 2023
Head Description of Item Unit Qnty. Rate Amount
Construction of Day care PHC Building at
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift and
stacking the soil upto a lead of 100 metre and
3 1 including dewatering, removing slush, shoring Cum 284.96 235.53 67,115.69
and strutting (as required), complete as per
specification and as directed by the Engineer-
Filling in foundation trenches and plinth, with
excavated earth including laying the earth in
layers not exceeding 23.5 cm thick ramming &
4 2 watering with all leads & lifts including cost of Cum 190.92 130.86 24,984.17
all labour,T&P completed as directed by the
Engineer-in-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
5 3 consolidating and dressing, labours, tools, Cum 163.92 811.13 1,32,958.32
taxes etc. all complete as per the specification
and direction of Engineer-In-Charge.
Diluting and injecting chemical emulsion (to be
supplied free of cost at site of work) for PRE
CONSTRUCTIONAL Anti-termite treatment and
creating a continuous chemical barrier under
and all-round the column pits, wall trenches,
basement excavation, top perimeter of
6 4 building, expansion joints, over the top Sqm 318.15 162.84 51,807.55
surface of consolidated earth on which apron
is to be laid, surroundings of pipes and
conduits etc. complete as per specifications
(plinth area of the building at ground floor
only shall be measured for payment).
Providing and laying plain cement concrete
1:3:6 (1 cement : 3 sand : 6 stone agregate
7 5 40mm nominal size) as levelling course in Cum 26.54 6526.23 1,73,206.04
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement: 2 sand: 4 stone aggregate
12mm nominal size) as levelling course in
8 6 foundation and plinth etc. including Cum 27.61 8474.41 2,33,978.35
tempering, curring, shuttering etc.complete all
depth and height.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
First class Fly ash Brick masonry using bricks
of size 25 cm. x 12 cm. x 8 cm. having
crushing strength not less than 75 kg. Per.
Sqr. Cm. in cement mortar of mix( 1:6) with
ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in water
before use in Foundation & Plinth including
9 7 splays cutting, circular moulding, corbelling, Cum 23.39 5434.37 1,27,086.19
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-Charge.
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in water
before use in Superstructure including splays
10 8 cutting, circular moulding, corbelling, 0 0.00 0.00 0.00
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge
Half brick work with Fly Ash brick masonry in
cement mortar (1:4) in super structure
having a crushing strength of not less than 75
kg./sqcm with dimensional tolerance ± 2%
including splays cutting circular moulding
chamfering and corbelling and similar such
type of works with all necessary projections
13 11 watering and curing after immersing the bricks 0 0.00 0.00 0.00
in water at least for six hours before use
including cost, conveyance, royalties and
taxes of all materials with all labour,labour
cess and T & P required for the work complete
in all respect as per direction of Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-20 grade as
per approved designs and drawings having a
minimum compressive strength (in work test)
200 Kg. / Square cm. in 15 cm. cubes at 28
days after mixing and test conducted in
accordance with I.S. 516 using 12 mm. to 20
mm. size black hard crushed broken granite
stone chips and screened and washed sharp
sand for mortar of approved quality from
approved quarry, washed and cleaned (
20mm. size chips not to exceeds 25 % ) to be
mixed in concrete mixture with Portland slag
cement (PSC) including hoisting, lowering,
laying and compaction concrete by using
15 13 vibrators, watering and curing for 28 days, 0 0.00 0.00 0.00
centering and shuttering then after
dismantling and removing debris from the
work site and finishing the exposed surface
smooth providing grooves or beads wherever
necessary including cost, conveyance, loading,
unloading, royalties and taxes of all materials
and cost of all labours, sundries, T & P
required of the work etc. complete in all
respect as directed by the Engineer-in-Charge.
But excluding cost and conveyance of M.S.
rods or Tor steel and binding wires and labour
charges for straightening, cutting, bending
etc. of M.S. rods or tor steel tying the grills
and placing in proper position.
18 16 b) Column up to plinth Cum 5.85 14310.33 83,715.89
20 18 f) Column above plinth Cum 11.29 14310.33 1,61,618.18
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL (VIZAG)
make including bending, binding, welding and
joining if necessary and tying the grills and
placing in position as required for R.C.C. Work
and for providing fan hooks as required,
hoisting, lowering, laying including cost,
conveyances, taxes of M.S. Rod or tor steel
and binding wires of 18 to 20 gauge and
30 28 labour required for the work for bending, 0 0.00 0.00 0.00
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight of
B.I.S. for M.S. Rods or tor steel only. Wastage
if any, including weight of binding wire will not
be considered for measurement) etc. complete
as per specification & direction of Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
33 31 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
36 34 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
39 37 cement mortar of mix 1:4 (1 cement : 4 0 0.00 0.00 0.00
coarse sand) including necessary scaffolding,
curing etc. all complete at all floors and all
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4
42 40 course sand) and filling joints with slurry 0 0.00 0.00 0.00
including cost of all materials, labour T&P etc.
required for the work all complete incl. rubbing
as per direction of the Engineer-in-charge.
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.10 Sqm & up to 0.4 sqm
(10mm. thick) of approved make in dadoes
laid on 12 mm thick cement mortar (1:3)
44 42 (1 cement : 3 course sand) and filling joints 0 0.00 0.00 0.00
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of the
Engineer-in-charge.
Supplying, fitting & fixing of 8-10 mm thick &
size of 600x600 mm vertified floor tile of
matt finish with veilcraft (VC/FT ) shield(
Scratch free/stain free) with water absorption
limit between 0.08% to 3% and conforming
to IS : 15622:2006 (Group B Ib). laid on 20
46 44 mm thick cement mortar (1:4) (1 cement : 4 0 0.00 0.00 0.00
course sand) and filling joints with white
cement of approved quality including cost of
all materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge (for New Work only )
Supplying, fitting & fixing of 8-10 mm thick
and size of 600x600 mm vertified wall tile of
in dadoes, skirting and risers of steps of laid
on 12 mm thick cement mortar (1:3) (1
cement : 3 course sand) jointed with slurry
48 46 mixed with pigment to match the shades of 0 0.00 0.00 0.00
the tiles etc. complete including cost of all
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing seasoned sal wood work
in frames at any locations including doors,
windows,cupboard, clerestory and other
50 48 frames fixing in position including cost of 0 0.00 0.00 0.00
hinges, M.S. flat (30mm x 6mm) hold fasts
lugs or dash fasteners of required dia and
length as per drawing / specification, at all
floors and all heights.
Factory made 30mm/32mm flush door shutter
(Laminates both side of frame) with all labour,
52 50 iron fittings, and wooden hinged cleats etc 0 0.00 0.00 0.00
fitted and fixed complete in all respect.
Providing & fixing of Factory fabricated
WINPLUS® Aluminium Door Systems - For
sliding windows, made from 6063 alloy and T-
6 tempered aluminium profile, in approved
shade of hybrid /purepolyster surface coating
(50-60micron Powder Coat), mechanically
mitred & jointed with casted / aluminium
extruded corner cleats along with Sliding
window Flush Lock, Bearing Rollers ,
Siliconised Weather strip and 5mm ET 125
toughened glassas infill shall be fitted into
Shutter using siliconised microwave treated
EPDM gaskets excluding taxes of all materials
and cost of all labours required for the work
etc. complete in all respect as desired by the
Engineer in charge. Note - conveyance, T&P
and scaffolding are not included herein.
Providing and fixing factory made 2 track 2
panel KOMMERLING uPVC white colour sliding
window comprising of uPVC multi-chambered
frame having section Frame 58mm x 49mm,
Window sash: 37mm x 61mm, made out of
lead free green profiles with corners fusion
welded, fully reinforced with Galvanized steel
1.5/2.0 mm. The windows profile should fulfill
the requirements of Viny 2010. The physical
properties of the profiles like Vicat softening
temperature, density, tensile strength,
hardness, weatherability, impact strength and
Modulus of Elasticity should be tested in
accordance with ASTM/DIN-ISO standards and
56 54 the thermal conductivity as per IS standards. 0 0.00 0.00 0.00
The window comprising of uPVC extruded
glazing beads of appropriate dimension, EPDM
gasket, G.I fasteners 100 x 8 mm size for
fixing frame to finished wall, plastic packers,
plastic caps and necessary stainless steel
screws etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled
with weather proof silicon sealant over backer
rod of required size. The sash will be fitted
with 5mm clear glass ( float ).complete in all
respect as per specification and direction of
the Engineer in Charge. etc. complete
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and Fixing of M.S. Grills, M.S.Doors,
M.S. Gate etc including cost,conveyance of all
59 57 materials,priming,and labour for fitting fixing 0 0.00 0.00 0.00
etc.complete as per the instruction of Engineer-
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall surface
of approved make and shade including sand
papering, applying putty wherever necessary
62 60 & cost of scaffolding, staging charges with 0 0.00 0.00 0.00
cost, conveyance, taxes of all materials, cost
of all labour,labour cess T&P etc. complete as
per the direction of the Engineer-in-charge.
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
65 63 papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to receive
painting in walls, at all heights with staging
68 66 wherever necessary with cost, conveyance, 0 0.00 0.00 0.00
taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for the
work complete in all respect as per the
direction of the Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside surface
of walls finished with Acrylic Wall putty (water
based) of make (Birla / JK) and finished
smooth & even surface to receive painting
using roller to the final coat including cost of
71 69 scaffolding staging charges with cost, 0 0.00 0.00 0.00
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc.
complete for all floors as per specification &
direction of the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
Painting two coats with approved Enamel Paint
74 72 on wood work over a coat of Wood Primer in 0 0.00 0.00 0.00
Painting two coats with approved Enamel Paint
on Steel work in Ground Floor
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
78 76 Terrace floor Sqm 4.01 173.22 694.63
Supplying, fitting and fixing of Stainless steel
of 304 grade in hand ralling using 50mm dia
of 2mm thick circular pipe with Balustrade of
size 32mm X 32mm X 2mm @ 0.90mtr. C/C
and stainless square pipe bracing of size
79 77 32mm X 32mm X 2mm in 3 rows in stair case 0 0.00 0.00 0.00
as per approved design and specification,
buffing, polishing etc with cost, conveyance,
taxes, all materials, labour, T&P etc. required
for the complete in all respect.
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift and
stacking the soil upto a lead of 100 metre and
82 80 including dewatering, removing slush, shoring Cum 44.00 235.53 10,363.23
and strutting (as required), complete as per
specification and as directed by the Engineer-
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
83 81 exceeding 15cm in depth: consolidating each Cum 29.48 130.86 3,857.81
deposited layer by ramming and watering
complete (lead upto 100m) as directed by the
Engineer-In-charge.
Supplying of filling sand in foundation and
over areas including watering,ramming,
84 82 consolidating and dressing, labours, tools, Cum 22.00 811.13 17,844.90
taxes etc., all complete as per the specification
and direction of Engineer-In-charge.
Providing and laying plain cement concrete
1:4:8 (1 cement: 4 sand: 8 stone agregate
40mm nominal size) as levelling course in
85 83 foundation and plinth etc. including Cum 16.50 5897.88 97,314.95
tempering, curring ,shuttering etc.complete all
depth and height.
Providing and laying 80 mm thick factory
made cement concrete interlocking paver
block of M-35 grade made by block making
machine with storng vibratory compaction of
86 84 approved size, design & shape, laid in required Sqm 110.00 864.94 95,143.40
colour and pattern over and including 75mm
thick sand filling.as per drawing, specification
and direction of Engineer-In-charge.
Construction of cement concrete kerb with top
and bottom width 115 and 165 mm
respectively, 250 mm high in M 20 grade PCC
on M-10 grade foundation 150mm thick,
foundation having 50mm projection beyond
kerb stone, kerb stone laid with kerb laying
machine, foundation concrete laid manually,
all complete as per clause 408
Providing & Painting with synthetic enamel
paint of approved brand and manufacture to
88 86 give an even shade as per the instruction of Sqm 90.00 168.98 15,207.84
Engineer-In-Charge at all floors and all heights
including all material & labour complete.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Surface dressing of the ground including
removing Vegetation and making up
90 88 undulations and in-equalities not exceeding 15 Sqm 150.00 28.08 4,212.60
cms in depth/ height including disposal of
rubbish lead upto 50m
Supplying and stacking of good earth at site
91 89 including royalty and carriage upto 5 km lead Cum 75.00 608.41 45,630.60
Supplying and stacking sludge at site including
92 90 royalty and carriage upto 5 km lead complete. Cum 30.00 346.92 10,407.60
Uprooting weeds from the trenched area after
10 to 15 days of its flooding with water
including disposal of uprooted vegetation,
93 91 breaking clods and fine dressing the ground Sqm 45.00 5.78 260.19
including all materials and labour complete as
per direction of Engineer-In-Charge.
Providing and laying Neelgiri/Mexican grass
turf with earth 50mm to 60mm thickness of
existing ground prepared with proper level and
ramming with tools wooden (Dhurmos) and
than rolling the surface with light roller make
94 92 the surface smoothen and light waterning with Sqm 105.00 252.99 26,564.16
sprinkler and maintenance
for 30 days or more till the grass establish
properly, as per direction of officer-in-charge.
Providing & laying Selection no. 1 grass turf
with earth 50mm to 60mm thickness of
existing ground prepared with proper level and
ramming with required tools wooden and than
95 93 rolling the surface with light roller make the Sqm 45.00 103.25 4,646.25
surface smoothen and light watering the same
maintenance for 30 days or more till the grass
establish properly,as per direction of officer in
Provision of plantation all around the campus
with suitable Plants and Shurbs where
required including all material and labour
97 95 devil back bone shurbs Nos 15.00 59.00 885.00
98 96 Alpinia sanderae(10'' dia) Nos 15.00 106.20 1,593.00
99 97 Anthurium andreanum(10'' dia) Nos 15.00 106.20 1,593.00
100 98 Caladium bicolor(6'' dia) Nos 15.00 59.00 885.00
101 99 Calathea bella Nos 15.00 59.00 885.00
Provision of plantation all around the campus
with suitable tress where required including
all material and labour charge.
103 101 Araucaria bidwillii Nos 20.00 177.00 3,540.00
104 102 Cinnamomum camphora Nos 18.00 118.00 2,124.00
105 103 Cryptomeria japonica Nos 17.00 177.00 3,009.00
106 104 Cupressus sempervirens Nos 15.00 177.00 2,655.00
107 105 Filicium decipiens Nos 15.00 118.00 1,770.00
108 106 Murraya exotica Nos 15.00 118.00 1,770.00
Plantation of Trees, Shrubs, and Hedge at site
i/c watering and removal of unsaverieable
110 108 material’s as per direction of officer in charge Nos 190.00 7.55 1,435.04
(excluding cost of plant & water)
111 109 Sub-Total of Civil Works 0 0.00 0.00 75,46,722.27
112 0 Plumbing Works 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials , labour, T&P and fixing
rotational moulded polyethylene cylindrical
vertical water storage tanks conforming to
IS:12701/1996 including cutting holes through
the tank and fixing mild steel tubes and
fittings and providing extra sockets and jam
nuts, fixing ball valve etc. including hoisting
upto a height of 5 metres above ground level
and placing the tank to the required position
and providing 5.40 mtr. lengthx0.25 mtr width
KB brickwork in cement mortar (1:6) of
0.46m height in staging and 0.13mtr thick
circular protection wall of 0.46mtr height to
113 1 support the tank,12mm thick cement plaster 0 0.00 0.00 0.00
in cement mortar (1:6) over brick work, RCC
slab of size 1.60mX1.60m and 0.10m thick
,RCC beam of 0.25mx0.30m and 3.40m
average length in cement concrete (1:2:4)
using 12mm size crusher broken hard black
granite chips and required steel reinforcement
including centering and
shuttering,watering,curing ,cost of all
materials,conveyance of all materials to
worksite , payment of royalty, all taxes etc.all
complete as per approved drawing , P.H.
specification and direction of Engineer-in-
2000 liters capacity PVC water storage
supplying all materials, labour, T&P and
cutting holes through existing brick work
including making good the damages in cement
mortar (1:4) for taking G.I. Pipes and fittings/
115 3 P.V.C. pipes and fittings including watering, Each 12.00 57.35 688.18
curing, cost & conveyance of all materials to
worksite, payment of royality, taxes etc. all
complete as per direction of Engineer-in-
Supplying all materials , labour, T&P and
cutting holes in RCC floors and roofs upto
19cm thick for passing P.V.C pipes and G.I
116 4 fittings etc. , and repairing the holes after Each 6.00 193.28 1,159.70
insertion of pipe etc. with cement concrete
(1:2:4) including finishing complete so as to
make it leak-proof as per P.H. specification
and direction of Engineer-in-charge
Supplying all materials, labour, T&P and
cutting grooves in pucca floors and walls for
taking G.I./P.V.C. pipes and making good the
117 5 damages including watering , curing , cost & Mtr 35.00 221.96 7,768.53
conveyance of all materials to worksite,
payment of royality, taxes etc all complete as
per direction of the Engineer-in-charge.
Supplying all materials , labour, T&P and
cutting holes through existing brick or laterite
118 6 masonry wall for taking U-PVC pipes and Each 12.00 222.90 2,674.82
fittings including making good the damages
etc. all complete as per P.H. specification and
direction of Engineer-in-charge
Supplying all materials , labour, T&P and
cutting of RCC chajja for taking HCI or U-PVC
pipe and fittings including making good the
119 7 damages etc. all complete as per P.H. Each 10.00 137.82 1,378.24
specification and direction of Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials labour T&P filling sand
120 8 in lavatories well watered and rammed 0 0.00 0.00 0.00
including lead of materials to work site.
Supplying all materials, labour, T&P and
providing cement concrete ( 1:2:4 ) with
12mm size crusher broken hard black granite
122 10 chips including watering, curing,cost of all 0 0.00 0.00 0.00
materials, conveyance of all materials to work
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge
Supplying all materials, labour, T&P and
providing and fixing ceramic tiles in floors,
treads or steps and landing on 25mm thick
bed of cement mortar (1:1) ( 1 cement : 1
sand ) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
site , payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge ( ceramic floor
tiles of premium grade having thickness 7mm
to 8mm conforming to IS 13755 of size
30cmx30cm Kajaria/Jhonson/Orient make to
be pre-approved by the Engineer-in-charge )
Kajaria/Somany/Johnson tile
126 14 Ground floor Washrooms Sqm 16.78 1495.77 25,098.99
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:4) on
brick work including watering,curing,cost of all
127 15 materials, conveyance of all materials to 0 0.00 0.00 0.00
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Ground floor - (Qnty same as Wall Tiles in
Supplying all materials, labour, T&P and
providing and fixing porcelain glazed tiles in
dado skirting on 12mm thick cement plaster
(1:3) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
129 17 site , payment of royalty, all taxes etc all 0 0.00 0.00 0.00
complete as per P.W.D specification and
direction of Engineer-in-charge( ceramic wall
tiles of premium grade having thickness
6.5mm to 6.7mm conforming to IS 13753 of
size 30cmx45cm Kajaria/Jhonson/Orient make
to be pre-approved by the Engineer-in-charge
Kajaria/Somany/Johnson tile
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and laying
in trenches (to level or slope) unplasticized
P.V.C. pipe conforming to IS 4985/2000 of the
following out side dia for class- 3 (0.60mpa )
including jointing with supply of approved
solvent cement by non-heat application
132 20 method/as per manufacture's specification, 0 0.00 0.00 0.00
provoding and laying in trench cement
concrete (1:4:8) with 40mm size hard granite
metal in the type C-1 standard bedding
surrounding or encasing including concrete for
bedding and curing etc all complete as per
P.H. specification and direction of the Engineer
Supplying all materials ,labour ,T&P and
constructing Inspection Chamber of inside
size 760mmx760mmx460mm with cement
concrete (1:3:6) using 40mm size crusher
broken hard black granite metal on bed , KB
brick work in cement mortar (1:6) in
foundation and plinth, moulding and shaping
the channel inside and benching with cement
concrete (1:2:4) using 12mm size crusher
broken hard black granite chips, 12mm thick
135 23 cement plaster (1:3) with cement punning to 0 0.00 0.00 0.00
inside, cement flush pointing (1:3) to outside,
R.C.C cover slab (1:2:4) using 12mm size
crusher broken hard black granite chips with
R.C.C man hole cover, earth work in
excavation in all kinds of soil and refilling the
cavity around the chamber including
watering,curing,cost of all materials,
conveyance of all materials to worksite,
payment of royalty,all taxes etc.all complete
as per approved drawing, P.H specification
and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia
Supplying all materials labor T&P and
constructing MH chamber of sizes earth work
in excavation in all kinds of soil CC(1:1:8) with
black granite chips size 46mm brick work with
K.B. brick having crossing strength not less
than 75 Kg /CM2 to 90 Kg/CM2s in
CM(1:6)12mm C.P(1:8) inside MH chamber
over benching with cement slush pointing
(1:3)outside the MH chamber providing
painting MS or CI step iron RCC(roof of slab
with CC(1:2:4)with black granite chips size
12mm bending binding tying the grills placing
of the reinforcement providing RCC color of
required size refilling the cavity around the MH
chamber with excavated earth including
channeling the bed of MH etc all complete as
per PH specification.
MH size 0.91m x 0.91 m with 0.45 m (18” dia
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials labour T&P and
constructing 1.40m dia x 2.00 m deep soak
way pit with dry brick having crossing strength
not less than 75Kg/CM2 to 99Kg/CM2 in
CM(1:6) for the remaining 0.4572mm height
of wall at top CC(1:3)inside and outside inside
fill with dry brick khoa size 38mm ,CM thick
139 27 RCC perforated slab to a height of 1.9012m Each 1.00 23755.05 23,755.05
from bottom covered by means of 50mmthick
RCC wall cover in pieces filled with iron plugs
including earth work in excavation refilling of
cavity around the pit and painting the iron
works complete as per PHD design and
specification including carriage of all materials
Supplying all materials ,labour ,T&P and
constructing gully trap chamber of inside size
250mmx250mm with 8cm thick RCC precast
cover slab in cement concrete (1:2:4) mix
using 12mm size crusher broken HG chips,
foundation concrete (1:4:8) using 40mm size
crusher broken HG metal on bed and around
trap, KB brick work in cement mortar (1:6) in
foundation and plinth and inside 12mm thick
cement plastering (1:3) finished with a
floating coat of neat cement including fixing
100mmx100mm size HCI gully trap,
150mmX150mm size CI grating etc.all
complete as per drawing, specification and
direction of Engineer-in-charge
141 29 1 no 30 Users Septic tank 0 0.00 0.00 0.00
Earth work in excavation of foundation in all
kinds of soil within 50m initial lead and 1.5m
initial lift including rough dressing & breaking
142 30 clods to maximum 5cm to 7cm and laying in cum 12.82 254.75 3,265.90
layers not exceeding 0.30m in depth and as
per direction of the Engineer-in-Charge.
Extra lifts of 1.50 mtr or part thereof over the
initial lift of 1.5 mtr in all kinds of
embankments and road works and ordinary
earthwork in general.
Supplying all materials, labour, T&P and
providing cement concrete (1:3:6) with 4cm
size hard granite metal including watering,
144 32 curing, conveyance of all materials to cum 0.68 6298.96 4,283.29
worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing cement concrete (1:2:4) with 12m
size hard broken granite chips including
145 33 watering, curing, conveyance of all materials cum 1.56 8225.19 12,831.30
to worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing cement concrete (1:1½:3) with
12mm size crusher broken hard black granite
chips for RCC works including hoisting, laying,
146 34 watering, curing,cost of all materials, cum 0.61 9358.46 5,708.66
conveyance of all materials to worksite,
payment of royalty,all taxes etc. all complete
as per PWD specification and direction of the
Engineer in charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing steel reinforcement of Fe-415 /Fe-
500 grade for RCC work including
cutting,bending,binding and tying the grills
147 35 and placing in position including cost of Qntl 0.49 10438.63 5,114.93
binding wire 18 to 20 gauge,cost of steel,
conveyance of all materials to worksite,
payment of royalty,all taxes etc all complete
as per PWD specification and direction of the
Engineer-in-charge.
Supplying all materials, labour, T&P and
providing rigid & smooth centering and
shuttering for RCC works including false work
148 36 and dismantling them after casting including 0 0.00 0.00 0.00
conveyance of all materials to worksite,
payment of royalty, taxes etc. all complete as
per specification and direction of the Engineer-
RCC floor, roof slab chhaja up to 4.430 m
Supplying all materials.labour.T&P and
providing brick work in foundation and plinth
with KB bricks having curshing strength not
less than 75 kg/sqcm with dimensional
tolerance+ 8% in cement mortar ( 1:3 )
150 38 including watering,curing,cost of all cum 5.76 6113.11 35,211.50
materials,conveyance of all materials to
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer in charge.
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:3) on
brick work including watering,curing,cost of all
151 39 materials, conveyance of all materials to sqm 39.30 222.31 8,736.86
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
providing cement punning including watering,
curing, conveyance of all materials to
152 40 worksite, payment of royalty, taxes etc all sqm 16.17 42.48 686.90
complete as per specification and direction of
the Engineer in charge
Supplying all materials labour T&P and fitting
and fixing 12mm dia MS/CI step iron including
153 41 supply of necessary CC(1:2:4) for fixing etc. Each 5.00 314.12 1,570.58
complete as per PH specification.
Supplying all materials, labour T&P for
providing fitting & fixing 100mm x 100mm SW
Tee in wall including filling the recess with
cement concrete (1:2:4) with 12mm size HG
154 42 chips all complete including watering curing Each 2.00 461.50 923.00
conveyance of all materials to work site
payment of royalty all complete as per
specification and direction of Engineer in
Supplying all materials labor T&P filling sand in
foundation and plinth with well watered and
rammed etc all complete as per direction of
Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
PVC pipes conforming to ASTM-D-1785/89 of
156 44 the following nominal bore, tube fittings and 0 0.00 0.00 0.00
clamps including making the wall good. ceiling
and floor, testing all complete as per
specification and direction of the Engineer in
charge.(Oriplast/Supreme/Finolex)
157 45 20mm dia PVC ASTM pipe (sch-80) Mtrs. 30.00 161.66 4,849.80
158 46 25mm dia PVC ASTM pipe (sch-80) Mtrs. 60.00 221.96 13,317.48
159 47 32mm dia PVC ASTM pipe (sch-80) Mtrs. 50.00 291.70 14,584.80
160 48 40mm dia PVC ASTM pipe (sch-80) Mtrs. 40.00 383.50 15,340.00
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes conforming to
IS:15778, having thermal stability for hot &
cold water supply, including all CPVC plain &
161 49 brass threaded fittings including fixing the pipe 0 0.00 0.00 0.00
with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC
solvent cement and testing of joints complete
as per direction of Engineer-in-Charge
Supplying all materials, labour T&P and fitting
and fixing brass/CP fittings of the following
nominal bore with supply of all joiniting
163 51 materials including cost & conveyance of all 0 0.00 0.00 0.00
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Con-CHR-
053KN Jaquar make)
15mm dia CP two in one bib cock (Con-CHR-
041KN Jaquar make)
15mm dia CP Bib cock (Con-CHR-047KN
15mm dia CP Long Body Bib cock (Con-CHR-
107KN Jaquar make)
15 mm dia CP Bib cock Elbow Action (Plaza
20mm dia CP concealed stop cock(Plaza Make)
25mm dia brass full way valve (Shakti make)
32mm dia brass full way valve (Shakti make)
40mm dia brass full way valve (Shakti make)
15mm dia CP Health faucet (Con-ALD-MCH-
573 Jaquar make)
174 62 15mm CP Extension piece Each 33.00 69.97 2,309.14
176 64 15mm size C.P. flange Each 33.00 47.55 1,569.28
Supplying all materials, labour, T&P and fitting
and fixing U-PVC SWR soil waste ventilating
pipes and fittings of the following outside
diameter conforming to ISI No 13592/1992 to
walls with nails, bobbins and wooden plugs or
laying in trenches including jointing with
177 65 supply of approved rubber lubricant by non- 0 0.00 0.00 0.00
heat application method/as per manufacturer's
specification, testing, earthwork in excavation
in all kinds of soil and refilling of trenches ,
cost & conveyance of all materials to worksite,
payment of taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
110mm U-PVC SWR Pipe (Supreme/Ashirvad)
110mm U-PVC ‘P’ Trap(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC door bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Door tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC offset without ear(Ori
Plast/Finolex/Supreme Make)
100mm U-PVC Cowl(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC S/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC D/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Socket(Ori
Plast/Finolex/Supreme Make)
Supplying all materials, labour, T&P and fixing
vitreous china water closet, squatting pan
(Indian type W.C pan/Orissa pattern squatting
pan) duly embedded in cement concrete
(1:5:10) using 4cm size hard granite metal
including fixing a pair of vitreous china
250mm x 130mm x30mm footrest, fixing
100mm dia HCI 'p' or 's' trap (with/without
50mm dia horn) for water colset squatting pan
including jointing the trap with pan in cement
mortar (1:1) cutting the floor and mending
good the damages , cost & conveyance of all
materials to worksite, payment of royality ,
taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
580mm size Orissa pan
(Hindware/Parryware/Neycer make)
Supplying all materials, labour, T&P and fixing
the following vitreous china Wash Down Water
Closet(European type W.C. pan)with integral
'p' or 's' trap to the floor with wooden plug and
chromium plated pedestal screws including
191 79 jointing the trap with soil pipe in cement 0 0.00 0.00 0.00
mortar (1:1) fixing plastic seat and cover for
wash down water closet with chromium plated
brass hinges and rubber buffers including
polishing , cost & conveyance of all materials
to worksite, payment of royality, taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
European water closet with 's' trap
plain(Hindware/Parryware/Neycer make)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour T&P and and
fixing 12.50 liters/10 liters capacity low level
flushing cistern with a pair of cast iron or M.S.
brackets complete with fittings such as
siphonic arrangements 15mm nominal size
brass/pvc ball valve with polythene float CP
brass handle,unions and couplings for
connection with inlet, outlet and overflow
pipes, 32mm dia CP long flush bend, 15mm
dia pvc inlet connection pipe including cutting
holes and making good the same and
connecting the flush bend with cistern and
closet and connceting the inlet pipe with
suupply main , cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm.
194 82 Dia CP long flush bend ( Slimline-white- Each 5.00 1853.07 9,265.36
Parryware make )
Supplying all materials, labour T&P and fixing
wash basins with hole for pillar taps with cast
iron or M.S.brackets painted white including
cutting holes in walls and making good the
damages with supply of wooden plugs, screws
and cement etc, fixing pedestal for wash basin
recessed at the back for the reception of pipes
and fittings, fixing PVC waste pipe of 32mm
nominal diameter for wash basin including
195 83 brass check nut complete, fixing pillar taps 0 0.00 0.00 0.00
capstan head screw down high pressure
lettered 'Hot' and 'Cold' with long screws,
shanks and back nuts of 15mm dia nominal
bore, fixing 15mm dia PVC inlet connection
pipe and making connection with pillar cocks
and supply mains for wash basin, fixing 32mm
dia CP brass waste, cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as perP.H specification and
direction of the Engineer-in-charge
550mmx400mm W.H.basin
(Hindware/Parryware/Neycer make)with
196 84 15mm dia C.P.pillar cock (Jaquar make) with Each 6.00 6245.27 37,471.61
Supplying all materials, labour, T&P for fitting
& fixing Kitchen sink of all standard sizes with
197 85 a pair of bracket, C.P. waste, trap & P.V.C. Each 3.00 5843.48 17,530.43
waste pipe & painting brackets including
supply of cement concrete & mortar etc. all
complete. 24” x 18” x 10” sink
Supplying all materials, labour, T&P and fixing
standard sized CP towel rail complete with CP
198 86 brass brackets fixed to wooden plugs with CP 0 0.00 0.00 0.00
screws as per specification and direction of the
Engineer in charge
199 87 25mmx600mm long CP towel rail Each 5.00 827.65 4,138.26
Supplying all materials, labour, T&P and fixing
standard sized glass-shelf with CP brass
brackets and guard rail complete fixed to
201 89 wooden plugs with CP screws as per 0 0.00 0.00 0.00
specification and direction of Engineer in
202 90 600mmx125mm plate glass shelf Each 6.00 711.89 4,271.36
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing
mirror of superior glass mounted on
203 91 6mm.thick A.C. sheet or ply wood sheet and 0 0.00 0.00 0.00
fixed to wooden plugs with CP screws and
washers complete as per specification and
direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled
Supplying all materials, labour, T&P and fixing
CP soap holder complete with CP brass
205 93 brackets fixed to wooden plugs with CP screws 0 0.00 0.00 0.00
as per specification and direction of the
Engineer in charge
206 94 CP soap holder Each 8.00 212.05 1,696.37
Supplying all materials labor T&P & Fitting &
fixing CP shower with rim with supply of red
207 95 lead and yarn nail complete as per direction of 0 0.00 0.00 0.00
Engineer in charge.
Providing fitting, fixing of Aluminium door with
anodized AL. door section of 9202 as vertical
member,9201 as top and 9200 as middle
bottom member with frame section No. 9221
209 97 and tapered clip no. 4660 and the frame to be Sqm 9.45 6065.64 57,320.27
completed by means of jointing angle No.
1855 Including all Cost of Labour. T&P hire
charges of drilling machine. labour charges
etc. complete. 53 x 1.625
Fitting & fixing of Aquagurad Cooler Cum
210 98 Purifier for drinking water privision. 0 0.00 0.00 0.00
211 99 Cost of Aquaguard Cooler - Cum Purifier Each 1.00 57230.00 57,230.00
Construction of 1nos production wells
including scientific source finding
through consolidated and unconsolidated
212 100 rock with down the hammer drilling rig 0 0.00 0.00 0.00
or combination rig with PVC pipe and
installation of submersible pump set with
Labour for drilling a perfectly vertical bore hole
of specified dia for a specified depth below
ground level through consolidated and
unconsolidated rock with down the hole
hammer drilling rig or combination rig as
required to suit the site condition as per the
direction of the Engineer in charge including
use of own rig with its accessories, tools and
plant and consumables etc for lowering of
200mm/150mm dia G.I/P.V.C/M.S casing
pipes for housing fitted with socket and with or
without well screen as per the necessity for
soft, medium, hard and boulder formation
(G.I/ P.V.C/ M.S casing pipes if required to
prevent collapse of overburden is to be
provided by the contractor including lowering
and withdrawing after completion of the tube
well), 200mm dia to 400mm dia in overburden
portion including packing of gravel supplied by
the contractor for 400mm dia bore only
214 102 Drilling of 200mm dia bore 0 0.00 0.00 0.00
217 105 Drilling of 150mm dia bore 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Lowering the following size of G.I/P.V.C/M.S
housing pipes with or without slotted pipes as
per the necessity from ground level up to
45.00m depth and fitted and fixed up in
perfectly vertical position including cutting and
219 107 threading of pipes and slotted pipes and 0 0.00 0.00 0.00
supplying and fixing all jointing materials,
tools and plant etc all complete and keeping
the top of casing pipe threaded including
plugging tube wells to prevent entry of foreign
220 108 Lowering of 200mm dia P.V.C casing pipes 0 0.00 0.00 0.00
Supplying polyvinyl chloride pipes as per ASTM-
D-1785-89 having threads in accordance with
DIN 2999 part-1/DIN-42225 part-II
specification length of pipe (laying length) will
be 3 mtrs. The pipes shall be supplied with
both external and threaded with free socket.
The pipe having external thread at one end i.e
female and or belled end. The female end
having internal thread is to be belled in order
to accept the male end while jointing pipes
with a bore threading shall be provided with a
greave at the roof of the male thread
accomodate flexible PVC/Rubber 'O' ring to
make the joint water tight colour of the pipe
shall be blue. The name of the manufacture
along with batch No class of pipe shall be
stranded legibly of each pipe length.
Supplying all materials, labour, T&P and
providing and providing sanitary sealing by
cement concrete grouting of annular space
around GI/PVC/MS housing pipe upto 5m
below ground level (as per drawing) to plug
the bore hole excluding cost of cement all
225 113 complete as per direction of the Engineer in Each 1.00 931.96 931.96
charge. Minimum one metre of casing pipe to
be inserted in the bore into the rock at the
bottom to ensure sanitary sealing (excluding
cost of cement which will be supplied directly
by the department)
Cleaning and developing the tube well with
supply of compressor worked till clear and
226 114 adequate discharge is obtained from the tube 0 0.00 0.00 0.00
well including supply and use of all necessary
equipment and labour as per direction of the
Engineer in charge
Supplying all materials, equipment, labour &
conducting reconnaissance survey, integrated
Hydrological and Geophysical (Electrical
Resistivity Method) survey & selection of
228 116 potential source for exploration of Ground 0 0.00 0.00 0.00
Water including selection and recommendation
of site for drilling wells in selected locations in
any part of Orissa under the following
Geological formation:
Rocky terrain with boulder formation for 300m depth
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing, fitting and fixing submersible pump
with squirrel cage induction type submersible
type submersible electric motor to run on 3
phase/1 phase line voltage ranging from 320
volt to 450 volt conforming to IS: 8034/89
with following specifications with suitable
control panel, jointing with GI/PVC/HDPE
pipes, electrification, testing, commissioning,
trial running, conveyance of all materials to
worksite, payment of taxes etc all complete as
per specification and direction of the Engineer
in charge (Texmo/Crompton Greaves/Kirloskar
1 H.P. Single phase/ three phase 3 stage
head renge of 20 to 35 mtr with discharge
231 119 capasity 145 to 110 L.P.M With outlet dia 25 Each 1.00 19749.90 19,749.90
mm (keeping 100% standby)
232 120 DOL Control panel Each 1.00 4490.49 4,490.49
233 121 40mm dia steel short piece Each 1.00 179.71 179.71
235 123 50mm size CI bracket Pair 1.00 107.73 107.73
237 125 20mm dia rigid UPVC pipes Mtr 30.00 8.14 244.26
238 126 Steel rope with cover Mtr 30.00 31.51 945.18
239 127 Labour charges for lowering including transportation
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
HDPE pipes and pipe fittings conforming to IS:
4984/2000 (10kgf/sqcm) of the following
240 128 nominal bore with clamps and jointing by 0 0.00 0.00 0.00
Fusion welding method including testing,
making good the wall, ceiling and floor all
complete as per specification and direction of
the Engineer in charge
241 129 32mm HDPE pipes (Finolex/Supreme make) mtr 91.20 117.76 10,739.61
242 130 Sub-Total of Plumbing Works 0 0.00 0.00 12,98,000.73
243 0 Electrical Works 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Point wiring in Recessed wirring to light point/
fan point/ exhaust fan point/ call bell point
with 1.5 sq.mm FRLSH/LSZH PVC insulated
copper conductor of ISI marked
Finolex/Anchor/Polycab/HAVELLS or
equievalant reputed make A catagory ISI
marked as approved as approved 20 mm dia
PVC flexible non metallic conduit FRLS type
ISI marked Make-AKG/Anchor/Kinjal or
equievalant reputed make A catagory ISI
marked as approved with 6A modular type((
falme retradant type)) switch ISI marked
Make-Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
244 1 make & model A catagory ISI marked as 0 0.00 0.00 0.00
approved, and ceiling rose ISI marked
Make-Schneider(Zencelo)/legrand( myrius)
/Panasonic (Equievalant model) or equievalant
reputed make & model A catagory ISI marked
as approved of modular type G.I box with
metallic cover plate (both side) falme
retradant type) Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved, of suitable size, modular box with
1.5 sq. Mm FRLS PVC insulated single core
multistandard copper conductor as earth wire
including all accessories and connection as per
direction of Engineer -in -Charge. CATAGORY
Group control of point in Recessed wirring to
light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked
Finolex/Anchor/Polycab/HAVELLS or
equievalant reputed make A catagory ISI
marked as approved as approved 20 mm dia
PVC flexible non metallic conduit FRLS type
ISI marked Make-AKG/Anchor/Kinjal or
equievalant reputed make A catagory ISI
marked as approved with 6A modular type((
falme retradant type)) switch ISI marked
Make-Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
248 5 make & model A catagory ISI marked as Nos 12.00 1200.06 14,400.72
approved, and ceiling rose ISI marked
Make-Schneider(Zencelo)/legrand( myrius)
/Panasonic (Equievalant model) or equievalant
reputed make & model A catagory ISI marked
as approved of modular type G.I box with
metallic cover plate (both side) falme
retradant type) Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved, of suitable size, modular box with
1.5 sq. Mm FRLS PVC insulated single core
multistandard copper conductor as earth wire
including all accessories and connection as per
direction of Engineer -in -Charge. CATAGORY
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying ,fixing of 6A Plug on the same
board in existing switch board with complete
fitting by 01 no of 6A switch & socket
(modular type)( ( falme retradant type)) &
other required accessories of ISI marked as
approved as per direction of Engg. -in -
Charge. Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
reputed make & model A catagory ISI marked
as approved, complete suitable for for
HOSTEL.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( ( falme
retradant type)) with suitable size modular
box & cover( falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
250 7 make & model ISI marked as approved , Nos 14.00 597.08 8,359.12
complete suitable for Residence.(Maximum 02
nos point in one circuit).All the switches &
sockets should be warrantied for a period of
10 years against manufacturing defects
against which ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying,fixing of 1x16A Plug on the
separate board with complete fitting by 01 no
of 16A switch & socket(modular type)( falme
retradant type)) with suitable size modular
box & cover( falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge.. Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision)or equievalant
reputed make A catagory ISI marked as
approved, (For equipement power)All the
switches & sockets should be warrantied for a
replacement period of 10 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Receass wiring for circuit/submain wiring with
the following mentioned size PVC FRLSH/LSZH
insulated, copper conductor, single core cable
(Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE)
or equievalant reputed make A catagory ISI
marked as approved, in recessed PVC conduit
Heavy duty FRLS of mentioned size
(AKG/Anchor/Kinjal or equievalant ISI
marked as approved) as required as per
direction of Engg.-in-Charge. Ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free after sales service within warranty
period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
253 10 sq. mm copper wire for earth continuty Mtr 100.00 153.40 15,340.00
conductor. In 20 mm dia non metallic heavy
duty flexible conduit (LDB to LSB/LIGHT
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
254 11 conductor in 20 mm dia non metallic heavy Mtr 211.00 169.92 35,853.12
duty flexible conduit.(BDB to LSB/LIGHT
CKT/5A PLUG/INVERTER POINT TO EACH
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core
255 12 2.5 sq. mm copper wire for earth continuty Mtr 155.00 307.98 47,736.90
conductor .in 25 mm dia non metallic heavy
duty flexible conduit(LDB to LSB/5A SOCKET)
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
duty flexible conduit .(PDB to PSB/ GAYSER
POINT/AC POINT/ROOM LIGHT CONTROL TO
CORRIDOOR POINT/DG PANEL ESSENTIAL
LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
257 14 conductor in 32 mm dia non metallic heavy Mtr 25.00 287.92 7,198.00
duty flexible conduit.(PDB to PSB/GAYSER.
POINT/AC POINT/DG PANEL ACCL TO EACH
QTR ESSENTIAL LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core 2.5
258 15 sq. mm copper wire for earth continuty Mtr 16.00 226.56 3,624.96
conductor in 25 mm dia non metallic heavy
duty flexible conduit .(LFDB TO LBDB)
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic heavy
duty flexible conduit.(LFDB TO LBDB/power
unit/point) (4X6+2X2.5)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core 4
sq. mm copper wire for earth continuty
conductorin 32 mm dia non metallic heavy
duty flexible conduit .(LFDB TO FLOOR PANEL
TO TPN BDB light ) (4X10+2X4)
Supplying and fixing 20 amps, 240 volts, SPN,
industrial type socket outlet, with 2 pole and
earth metal enclosed plug top along with 32
amps. C-series, SP MCB, in sheet steel
enclosure, on surface or in recess, with
chained metal cover for the socket outlet, and
complete with connections, testing and
commissioning etc. as required as per
direction of Engg.-in-Charge.. . Make-
Legrand/Schneider/Siemens/panasonic or
equievalant reputed make & model A catagory
ISI marked as approved,All the Components
should be warrantied for a replacement period
of 5 years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying and fixing following size/ modules,
GI box along with modular base & metallic
cover plate (both side) plate for modular
switches in recess etc as required as per
direction of Engg.-in-Charge. MAKE-
Legrand/Siemens/Anchor/Panasonic/
Schneider or equievalant reputed make &
262 19 model A catagory ISI marked as approved .All 0 0.00 0.00 0.00
the Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI marked
along with accessories in surface/recess
including cutting the wall and making good the
same in case of recessed conduit as required
as per direction of Engg.-in-Charge .MAKE
KINJAL/ AKG/Anchor or equievalant reputed
make A catagory ISI marked as approved
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply and fixing modular type indicator on
the existing switch box/cover . Equievalant
higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved as required
as per direction of Engg.-in-Charge.All the
Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying and installation of AC starter
Modular type, Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved coil voltage-
415 Volt A.C. & O/L range of 9-14A range on
mod Box of suitable size including modular
270 27 coveras required as per direction of Engg.-in- Nos 5.00 724.52 3,622.60
Charge .All the Components should be
warrantied for a replacement period of 5 years
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Supply and fixing CALL bell (Ding dong type)
/Buzzer on the existing switch box/cover.
Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved .as required
as per direction of Engg.-in-Charge.All the
Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
S/F of Bakelite angle holder/batten holder
(make-Anchor/Havells/Panasonic or
equievalant reputed make A catagory ISI
marked as approved )of ISI marked
conforming to IS-1258/1987 in place of ceiling
rose as per direction of Engg.-in-Charge .All
272 29 the Components should be warrantied for a each 12.00 70.80 849.60
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of Blanking plate(modular
type)( falme retradant type)) in existing
switch box(anti bactorial & falme retradant
type) including supplying of all required
accessories of ISI marked as approved as per
direction of engg-in-charge..Make-
Schneider(Zencelo)/legrand( Arteor)
273 30 /Panasonic (vision), complete suitable for IPH Nos 12.00 49.56 594.72
standard hospital.It should be warrantied for
a period of 10 years against manufacturing
defects against which ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
274 31 Sub-Head II (Light fitting Fixture & Fan) 0 0.00 0.00 0.00
Supplying, installation, of exhaust fan of
heavy duty 300 mm sweep (Make-
Equievalant higher model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha/Hal
onix or equievalant reputed make & model A
catagory ISI marked as approved ) of
exhaust fan in the existing wall, including
fixing & conntection as required as per
direction of Engg.-in-Charge. Replacement
Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1400 mm sweep white/milky
colour ceiling fan Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha/Hal
onix or equievalant reputed make & model A
276 33 catagory ISI marked as approved ) including Nos 8.00 2374.16 18,993.28
wiring the down rod of standard length (upto
30 cm) with 1.5 sq mm PVC insulated, copper
conductor, single core cable etc. as
required.(With fan Regulator) as required as
per direction of Engg.-in-Charge.Replacement
Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1200 mm sweep white/milky
colour ceiling fan Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha
/Halonix or equievalant reputed make & model
277 34 A catagory ISI marked as approved ) Nos 15.00 2361.18 35,417.70
including wiring the down rod of standard
length (upto 30 cm) with 1.5 sq mm PVC
insulated, copper conductor, single core cable
etc. as required as per direction of Engg.-in-
Charge,Replacement Warranty will be 5
years.. .(With fan Regulator)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
surface mounted square shape 18 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting
distribution with wattage not more than 20
watt and lumen output of 1500 lumens, , CRI
not less than 80,CCT of 6000 degree K,THD
less than 10%, with electronic driver, internal
surge protection of 2.5 KV , L70 B50: 30000
hrs (2 yrs warranty) and all other accessories
suitable for operation on 220 V to 240 V
supply as required as per direction of Engg.-in-
Charge. ( Make : (Make: wipro LD80-171-60-
XX-SM or similar model of LT/Trilux
/Philips/Panasonic/HALONIX or equievalant
reputed make & model A catagory ISI marked
as approved).The luminaire should be
Replacement Warranty will be 5 years
SITC of energy efficient LED tube light fittings
with decorative alluminium batten and LED
tube light having power rating not more than
20 watt and lumen output not less than 2200
lumen complete with electronic driver and all
other accessories with diffuser having 5 years
warranty i/c connection etc as required as
per direction of Engg.-in-Charge. ( (Make:
wipro LL20-221 --or similar model of
LT/Trilux /Philips/Panasonic/HALONIX or
equievalantreputed make & model A catagory
ISI marked as approved.). The luminaire
should be Replacement Warranty will be 5
SITC of Sleek LED 10-12 watt mirror light
fitting with extruded polycarbonate
housing,High optically efficient diffuser,above
wash basin complete with all accessoriesetc.
directly on wall, including connection with 1.5
sq. mm FRLS PVC insulated, copper conductor,
single core cable and earthing etc. as required
as per direction of Engg.-in-Charge.
( Make : WIPRO Model No:LL20-111-XXX-60-
NE or similar model of
PHILIPS/Panasonic/HALONIX or equievalant
reputed make & model A catagory ISI marked
as approved. )The luminaire should be
Replacement Warranty will be 5 years
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white
powder coated ,pressure die-cast Al housing
,with high transmititivity,non-yellowing PMMA
diffuser, with wattage not more than 20 watt
and lumen output not less than 2600 Lumen (
120 lumens/watt ) of size240 x240 x 40 mm ,
,CRI not less than 80,CCT of 5700-6500
degree K,THD less than 10%, with Non
integrated isolated driver (protects the output
/secondary side from any disturbance on the
281 38 input / primary side ensuring safe operation), Nos 21.00 2357.64 49,510.44
all other accessories , life : 50,000 burning
hours (5 years warranty) , Internal surge
protection of 3 KV suitable for operation on
230 V, 50 Hz supply as required as per
direction of Engg.-in-Charge. (Make: wipro
LDB1-171-XXX-60-SM or similar model of
LT/Trilux /Philips/Panasonic/HALONIX or
equievalant reputed make & model A catagory
ISI marked as approved.) The luminaire
should be Replacement Warranty will be 5
Supplying, installation, testing and
commssioning of 400 mm sweep wall fan
Make-Equievalant higher model with 3 star
Havells/almonard/Anchor/Panasonic/Usha/Hal
282 39 onix or equievalant reputed make & model A Nos 2.00 2542.90 5,085.80
catagory ISI marked as approved ) including
wiring with 1.5 sq mm PVC insulated, copper
conductor, single core cable etc. as required
as required as per direction of Engg.-in-
Charge.Replacement Warranty will be 5 years.
Supplying and fixing extra conduit down rod of
20 cm length G.I. pipe 15 mm dia, heavy
gauge including painting etc. as requiredas
283 40 required as per direction of Engg.-in-Charge . Nos 25.00 37.76 944.00
(Note : More than 5 cm length shall be
rounded to the nearest 10 cm and 5 cm or less
shall be ignored)of ISI mark as approved.
284 41 BDBS,DB,AC DB,FLOOR PANELS,MCBS 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of following mentioned
way, three pole/single pole and neutral, sheet
steel,double door MCB distribution board, 415
volts/240 volts shall be as per IEC 61439-
3,integrated door earthing system offering
additional safety to the user,High quality
polyurethane Gasket,the box and cover shall
be fabricated to withstand IK09,the DB should
be properly pre-treated with 7 tank process
and duly powder coated, phosphatized with
powder coated finish, on surface/recess,
complete with terminal blocks,with suitable
size FR PVC insulated copper conducter up to
terminal blocks, tinned copper busbar, neutral
busbar, earth bar, din bar. Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/ Schneider-
Acti 9/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
as approved. as per direction of Engg.-in-
Charge. The Distribution boards should be
Replacement Warranty will be 5 years
4 Way(8+12) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting with
100A Copper Bus Bar for each phase, with
286 43 neutral Bus bar, Earth Bar & Cable ties for Nos 2.00 2553.52 5,107.04
cable management, prefitted masking sheet,
IP43-IK09 with metal door(FOR LIGHT,POWER
INDOOR,3-PH,POWER LOAD) Warranty on DB
Supply and fixing of 12 way DD single pole
and neutral sheet steel MCB distribution board
250V on surface/recess complete with tinned
copper bus bar, neutral bus bar, earth bar, din
bar, detachable gland plate, interconnections,
phosphatized and powder painted including
earthing etc. as required (but with out MCB/
RCCB/ Isolator) (ALL LIGHT WITH
CORRIDOOR/COMMON AREA,EM LIGHT,UPS
LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
door)(only each EM. CONNECTION UPS LOAD)
Supplying and fixing 20 amps rating, 240
volts, C series, Double poles MCB of Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
289 46 as approved in the existing MCB DB complete Nos 1.00 395.30 395.30
with connections as per direction of Engg.-in-
Charge. The MCB should be Replacement
Warranty will be 5 years .MCB should have the
fault indication system in different colour for
ON, OFF & TRIP condition or Mid trip position
for Trip conditions for easier identification of
fault.Warranty on MCB is 5 years.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 6 amps to 32 amps
rating, 240 volts, C series, single poles MCB of
Make-LEGRAND-Ekinox3 DB/ Siemens-
Betaguard/ Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
290 47 as approved. the existing MCB DB complete Nos 36.00 155.76 5,607.36
with connections as per direction of Engg.-in-
Charge. The MCB should be Replacement
Warranty will be 5 years.MCB should have the
fault indication system in different colour for
ON, OFF & TRIP condition or Mid trip position
for Trip conditions for easier identification of
fault.Warranty on MCB is 5 years.
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABBor equievalant reputed
291 48 make & model A catagory ISI marked as Nos 2.00 1990.66 3,981.32
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
292 49 make & model A catagory ISI marked as Nos 1.00 2270.32 2,270.32
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5
Supplying and fixing 63Amps TPN 415 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
293 50 approved in the existing MCB DB in the Nos 2.00 3114.02 6,228.04
existing MCB DB complete with connections as
per direction of Engg.-in-Charge.(for power
BDB & AC ODU, 8 way TPN BDB IC).The RCCB
should be Replacement Warranty will be 5
294 51 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C of materials and installation of pipe
earth electrode made out of 50mm dia class B
G.I. pipe of 3.0 metre long with arrangements
for fitting/ termination of G.I. flat / wire with
G. I. nut bolts & washers including cost of
burnt wood charcoal, salt, foreign soil, water
295 52 pouring arrangements, brick masonary Nos 3.00 3701.66 11,104.98
enclosure on top with removable RCC cover
complete with labour for excavation of pit in
all kinds of soil & rock as required and as per
direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Providing and fixing 4 mm dia copper wire on
296 53 surface or in recess for loop earthing as Mtr 33.00 112.10 3,699.30
required.as per direction of Engg.-in-Charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
CABLING AND END TERMINATION MAIN
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
299 56 following size cables as per direction of Engg.- 0 0.00 0.00 0.00
in-Charge. Ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free after
sales service within warranty period for
acceptance of materials
4core x 16 sq mm (MDB TO FDBL/FDBU
4 core x 4 sq mm (for small power/LIGHT TO
302 59 3.5core x 35 sq mm (To power MDB) Mtr 73.00 257.72 18,813.84
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in the
304 61 trench in one horizental formation including Mtr 20.00 151.04 3,020.80
excavation ,sand coushing protection covering
and refilling the trench etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
305 62 exceeding 25 SQ. MM direct in ground in the Mtr 30.00 48.38 1,451.40
EXISTING PIPE etc as required as per direction
of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
306 63 25 SQ. MM but not exceeding 400 SQ. MM Mtr 22.00 66.08 1,453.76
direct in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM in open duct etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
308 65 25 SQ. MM in open duct 400 SQ. MM direct in Mtr 8.00 53.10 424.80
ground in the EXISTING PIPE etc as required
as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
309 66 exceeding 25 SQ. MM in surface with shaddle Mtr 3.00 94.40 283.20
and screw etc as required as per direction of
Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
310 67 exceeding 120 SQ. MM From 25 SQ. MM in Mtr 2.00 149.86 299.72
surface with shaddle and screw etc as required
as per direction of Engg.-in -charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
311 68 exceeding 400 SQ. MM From 120 SQ. MM in Mtr 2.00 152.22 304.44
surface with shaddle and screw etc as required
as per direction of Engg.-in -charge.
Supplying and making end termination with
brass compression gland and aluminium lugs
for following mentioned size cable.as per
direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia G.I.
pipe (medium class) in ground complete with
G.I fitting incl. trenching(75 mm depth)and
refilling as per direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground complete
with fitting incl. trenching(75 mm depth)and
refilling as per direction of Engg.-in-Charge.
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by
2mm CRCA steel sheet duly derusted & pented
by simens gray powder cote paint is designed
320 77 as G.A drawing as per direction of Engg.-in- Set 1.00 59067.26 59,067.26
Charge. Warrentee period of replacement of
panel & accessories must be 5 years &
compelete test certificate must be submitted
along with panel board including component
In commer Main- 01 number of 125(80-125)
Amps 4P MCCB with Rom & sprader link,25 Ka
& 01 nos of 63A 4P O/L changeover switch for
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=100%Ics)with shunt trip.with
axulary for BMS
Busbar- 04 numbers of 200Amps Electrolytic
copper busbar duly sleeved by color coaded
PVC sleeve & supported by suitable size DMC
Busbar DG - 04 numbers of 60 Amps
Electrolytic copper busbar duly sleeved by
color coaded PVC sleeve & supported by
suitable size DMC insulator.
Out going- (i) 63A 4P MCB 2 NOS FOR
POWER BDB GF,1f(Legrand/Schneider make)
Out going- (ii) 02 nos 32A 4P MCB LIGHT
BDB AC IDU BDB/LIGHT
BDB,LIFT,WATER,solar,ups(Legrand/Schneider
Out going- (iii) 01 no 32A 2P MCB LIGHT
BDB AC IDU BDB/LIGHT
BDB,LIFT,WATER,solar,ups(Legrand/Schneider
Instrument- (i)3 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of digital type multifunction meter
328 85 with CT for voltage,current,frequency,PF,THD 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of Legrand -
Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved
.The Load bearing capacity of the Cable Trays
should be minimum of 104.8Kg/meter at the
span of 1.5Meter as per UL
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , FLOOR RACE WAY WITH JUNCTION
with internal dimensions of size 54mm(H) x
200mm(W), of Legrand - Cablofil make or
equievalant reputed make ISI marked as
approved .The Load bearing capacity of the
Cable Trays should be minimum of
104.8Kg/meter at the span of 1.5Meter as per
UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required.
EXTERNAL ESTIMATE OF SUBSTATION(AS PER
TATA POWER CHARGES)
Supplying & installation of 100x116 mm RS
Joist, 9 mtr long x 2 nosx23 Kg=414 Kg
Supplying & installation of Pressure Channel
Long( 9.2 K.g. per mtr.)x2 Nos
Supplying & installation of S/S DP bressing
334 91 chhanel 75 x 40 x 6mm MS channel each 2.8 K.g. 12.00 148.68 1,784.16
mtr. Long( 6.8 K.g. per mtr.)x2 Nos
Supplying & installation of AB Swith & HG
335 92 Fuse, Mounting Channel 75x40x6 -2.8 K.g. 12.00 148.68 1,784.16
mtr.long, 4 nos.(6.8K.g. per mtr.)
Supplying & installation of Cantilever chhanel
336 93 for supporting AB Switch arm, 75x40x6-1 mtr. K.g. 8.00 148.68 1,189.44
Long, 2 nos.(6.8 K.g. per mtr.)
Contilever chhanel for supporting HG Fuse 50
nos.)4.5K.g. per mtr.
Supplying & installation of Angle for
Cantilever arrrangement for AB Switch & HG
Fuse 50 x 50 x 6 -2 mtr .each 2 nos.(4.5 K.g.
Supplying & installation of S/S DP bressing
Angle 50 x 50 x 6 mm - 2.8 mtr. Long 2
nos.(4.5 K.g. per mtr.) with side angel ( Total
Supplying & installation of Angle for mounting
340 97 LT distribution Box 50 x 50 x 6 mm MS Angel - K.g. 12.00 148.68 1,784.16
2.5 mtrs.each Long 2 nos.( 4.5 K.g. per mtr.)
Supplying & installation of 11KV AB Switch 3
Pole (100 Amp.)
Supplying & installation of 11KV HG Fuse 3
Pole (100 Amp.)
Supplying & installation of 11 KV L.A. 12KV-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying & installation of+B7 H.T.stay set (
Supplying & installation of H.T. Stay Insulator
Supplying & installation of H.T. Stay clamp
(1.95 K.g./ Pair )
Supplying & installation of 7/10 SWG Stay
Supplying & installation of of materials and
installation of pipe earth electrode made out of
50mm dia class B G.I. pipe of 3.0 metre long
with arrangements for fitting/ termination of
G.I. flat / wire with G. I. nut bolts & washers
including cost of burnt wood charcoal, salt,
foreign soil, water pouring arrangements,
brick masonary enclosure on top with
removable RCC cover complete with labour for
excavation of pit in all kinds of soil & rock as
required and as per direction of Engineer-in-
349 106 Supplying & installation of No.6 GI Wire K.g. 5.00 211.22 1,056.10
Supplying & installation of 40x6mm GI Flat for
Fixing of stay set with 0.5Cum cement
concret foundation 1:3:6 size
metal with all labour and material except stay
set , stay wire , stay insulator .
Concreting of support C.C - 1:4:8 using 40mm
BHG metal size - 5'x2'x2' = 20CFT =
Padding 900x600x150mm = 0.081
Couping of support section 15''x15'' ( 3.9Cft)
height 2'-6' ( 1' - 6'' above G.L & 1' - 0' below
G.L ) in C.C 1:2:4 using 12mm BHG metal &
curing for 5 days
Supplying & installation of Materials for
Machinery work for Earth Pit,Charcoal, Salt
etc including construction of earthing chamber
(Size: 2"x2") and RCC slab cover
Supplying and Laying of HT cable on existing
3cx10 sq. mm XLPE cable.,11kv ,1 run For 25
Supplying and making out door end
termination with cast resin compound
aluminium lugs and other jointing materials
for 3cx10 sq.mm size of PVC insulated
armoured and PVC sheathed aluminium
conductor cable of 11 KV grade as required.
Supplying & installation of 25x6mm copper Z
358 115 clamp for TFR LT 4nos x0.8kg each for Kg 5.00 1465.56 7,327.80
connection of LT cable
359 116 Supplying & installation of Red Oxide paint Ltr 3.00 148.68 446.04
All. Paint for painting of pole & transformer.
Black Paint for painting of angle & channel.
Supplying & installation ,fixing of Ms Nut , Bolt
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply & Installation of Out Door type
Transformer ONAN type with Copper winding
having 25 continuous KVA rating, 11 KV / 415
Volts 3 Phase 50 Hz Vector Group DY-11,
Transformer shall operate without injurious
heating at the rated KVA at any voltage within
+/- 10% of the rated voltage of that particular
tap.Transformer shall be provided with ON
Load Tap Changer arrangement in steps of
Conservator, Silica jail breather having
connecting terminals on HV side suitable for
bare condcutor conenction, Cable End Box on
medium voltage side suitable for 1.1 KV 3.5
Core UG Cable, on Double Pole Strucutre or
Brick / CC / RCC Platforms with all fittings,
accessories, fill with flitered Transformer Oil
including testing & commissioning etc.
complete as required.
Supplying & installation of 100x116mm RS
Joist 4mtr longx23kg for resting of LT cable
Providing and fixing 25mm x 5 mm G.I strip
365 122 on surface or in recess for connections etc. as Mtr 12.00 211.22 2,534.64
Sundries for survey , PVC tape, Ampire
366 123 tape,Danger Board, small size nut & Bolt LS 1.00 3682.78 3,682.78
preparation of drawing cable socket etc
367 124 Sub-Total of Electrical Works 0 0.00 0.00 9,91,921.23
368 0 Firefighting Works 0 0.00 0.00 0.00
369 1 EXTINGUISHER SYSTEM 0 0.00 0.00 0.00
Portable Fire Extinguisher System Supplying,
installation, testing and commissioning of CO2
type Fire Extinguisher 4.5 kg capacity
confirming to IS: 2878 made from ISI marked
seamless cylinder confirming to IS: 7285,
370 2 fitted with ISI marked controlled valve Nos 3.00 12302.68 36,908.04
confirming to IS: 3224, high pressure 1mtr
discharge hose & horn complete with initial
gas charged with carrying handle & wall
mounting bracket as per direction of Engineer-
371 3 FIRE SIGNAGES SYSTEM 0 0.00 0.00 0.00
Providing and installing in position the
following type of sign boards made out of
372 4 3mm thick "Opaque" PVC foam board with 0 0.00 0.00 0.00
computer cut, PVC non-reflective self adhesive
vinyle painted foam board, complete with
mirror fasteners.
Providing and fixing the signages "Fire Exit,
Fire Exit Arrow Down,Fire Exit Arrow Left,Fire
Exit Arrow Right" of 1.5in height letters in
373 5 white with green back ground.The size of the Nos 5.00 1080.88 5,404.40
board shall be 25cm x 15 cm and shall be
fixed at the height of 2 mts
374 6 Sub-Total of Firefighting Works 0 0.00 0.00 42,312.44
Sub-Total for Construction of Day care
PHC Building at Loba
Construction of Day care PHC Building at
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift and
stacking the soil upto a lead of 100 metre and
378 2 including dewatering, removing slush, shoring Cum 284.96 235.53 67,115.69
and strutting (as required), complete as per
specification and as directed by the Engineer-
Filling in foundation trenches and plinth, with
excavated earth including laying the earth in
layers not exceeding 23.5 cm thick ramming &
379 3 watering with all leads & lifts including cost of Cum 190.92 130.86 24,984.17
all labour,T&P completed as directed by the
Engineer-in-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
380 4 consolidating and dressing, labours, tools, Cum 163.92 811.13 1,32,958.32
taxes etc. all complete as per the specification
and direction of Engineer-In-Charge.
Diluting and injecting chemical emulsion (to be
supplied free of cost at site of work) for PRE
CONSTRUCTIONAL Anti-termite treatment and
creating a continuous chemical barrier under
and all-round the column pits, wall trenches,
basement excavation, top perimeter of
381 5 building, expansion joints, over the top Sqm 318.15 162.84 51,807.55
surface of consolidated earth on which apron
is to be laid, surroundings of pipes and
conduits etc. complete as per specifications
(plinth area of the building at ground floor
only shall be measured for payment).
Providing and laying plain cement concrete
1:3:6 (1 cement : 3 sand : 6 stone agregate
382 6 40mm nominal size) as levelling course in Cum 26.54 6526.23 1,73,206.04
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement: 2 sand: 4 stone aggregate
12mm nominal size) as levelling course in
383 7 foundation and plinth etc. including Cum 27.61 8474.41 2,33,978.35
tempering, curring, shuttering etc.complete all
depth and height.
First class Fly ash Brick masonry using bricks
of size 25 cm. x 12 cm. x 8 cm. having
crushing strength not less than 75 kg. Per.
Sqr. Cm. in cement mortar of mix( 1:6) with
ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in water
before use in Foundation & Plinth including
384 8 splays cutting, circular moulding, corbelling, Cum 23.39 5434.37 1,27,086.19
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-Charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in water
before use in Superstructure including splays
385 9 cutting, circular moulding, corbelling, 0 0.00 0.00 0.00
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge
Half brick work with Fly Ash brick masonry in
cement mortar (1:4) in super structure
having a crushing strength of not less than 75
kg./sqcm with dimensional tolerance ± 2%
including splays cutting circular moulding
chamfering and corbelling and similar such
type of works with all necessary projections
388 12 watering and curing after immersing the bricks 0 0.00 0.00 0.00
in water at least for six hours before use
including cost, conveyance, royalties and
taxes of all materials with all labour,labour
cess and T & P required for the work complete
in all respect as per direction of Engineer-in-
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-20 grade as
per approved designs and drawings having a
minimum compressive strength (in work test)
200 Kg. / Square cm. in 15 cm. cubes at 28
days after mixing and test conducted in
accordance with I.S. 516 using 12 mm. to 20
mm. size black hard crushed broken granite
stone chips and screened and washed sharp
sand for mortar of approved quality from
approved quarry, washed and cleaned (
20mm. size chips not to exceeds 25 % ) to be
mixed in concrete mixture with Portland slag
cement (PSC) including hoisting, lowering,
laying and compaction concrete by using
390 14 vibrators, watering and curing for 28 days, 0 0.00 0.00 0.00
centering and shuttering then after
dismantling and removing debris from the
work site and finishing the exposed surface
smooth providing grooves or beads wherever
necessary including cost, conveyance, loading,
unloading, royalties and taxes of all materials
and cost of all labours, sundries, T & P
required of the work etc. complete in all
respect as directed by the Engineer-in-Charge.
But excluding cost and conveyance of M.S.
rods or Tor steel and binding wires and labour
charges for straightening, cutting, bending
etc. of M.S. rods or tor steel tying the grills
and placing in proper position.
393 17 b) Column up to plinth Cum 5.85 14310.33 83,715.89
395 19 f) Column above plinth Cum 11.29 14310.33 1,61,618.18
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL (VIZAG)
make including bending, binding, welding and
joining if necessary and tying the grills and
placing in position as required for R.C.C. Work
and for providing fan hooks as required,
hoisting, lowering, laying including cost,
conveyances, taxes of M.S. Rod or tor steel
and binding wires of 18 to 20 gauge and
405 29 labour required for the work for bending, 0 0.00 0.00 0.00
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight of
B.I.S. for M.S. Rods or tor steel only. Wastage
if any, including weight of binding wire will not
be considered for measurement) etc. complete
as per specification & direction of Engineer-in-
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
408 32 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
411 35 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
414 38 cement mortar of mix 1:4 (1 cement : 4 0 0.00 0.00 0.00
coarse sand) including necessary scaffolding,
curing etc. all complete at all floors and all
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4
417 41 course sand) and filling joints with slurry 0 0.00 0.00 0.00
including cost of all materials, labour T&P etc.
required for the work all complete incl. rubbing
as per direction of the Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.10 Sqm & up to 0.4 sqm
(10mm. thick) of approved make in dadoes
laid on 12 mm thick cement mortar (1:3)
419 43 (1 cement : 3 course sand) and filling joints 0 0.00 0.00 0.00
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of the
Engineer-in-charge.
Supplying, fitting & fixing of 8-10 mm thick &
size of 600x600 mm vertified floor tile of
matt finish with veilcraft (VC/FT ) shield(
Scratch free/stain free) with water absorption
limit between 0.08% to 3% and conforming
to IS : 15622:2006 (Group B Ib). laid on 20
421 45 mm thick cement mortar (1:4) (1 cement : 4 0 0.00 0.00 0.00
course sand) and filling joints with white
cement of approved quality including cost of
all materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge (for New Work only )
Supplying, fitting & fixing of 8-10 mm thick
and size of 600x600 mm vertified wall tile of
in dadoes, skirting and risers of steps of laid
on 12 mm thick cement mortar (1:3) (1
cement : 3 course sand) jointed with slurry
423 47 mixed with pigment to match the shades of 0 0.00 0.00 0.00
the tiles etc. complete including cost of all
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge.
Providing and fixing seasoned sal wood work
in frames at any locations including doors,
windows,cupboard, clerestory and other
425 49 frames fixing in position including cost of 0 0.00 0.00 0.00
hinges, M.S. flat (30mm x 6mm) hold fasts
lugs or dash fasteners of required dia and
length as per drawing / specification, at all
floors and all heights.
Factory made 30mm/32mm flush door shutter
(Laminates both side of frame) with all labour,
427 51 iron fittings, and wooden hinged cleats etc 0 0.00 0.00 0.00
fitted and fixed complete in all respect.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing & fixing of Factory fabricated
WINPLUS® Aluminium Door Systems - For
sliding windows, made from 6063 alloy and T-
6 tempered aluminium profile, in approved
shade of hybrid /purepolyster surface coating
(50-60micron Powder Coat), mechanically
mitred & jointed with casted / aluminium
extruded corner cleats along with Sliding
window Flush Lock, Bearing Rollers ,
Siliconised Weather strip and 5mm ET 125
toughened glassas infill shall be fitted into
Shutter using siliconised microwave treated
EPDM gaskets excluding taxes of all materials
and cost of all labours required for the work
etc. complete in all respect as desired by the
Engineer in charge. Note - conveyance, T&P
and scaffolding are not included herein.
Providing and fixing factory made 2 track 2
panel KOMMERLING uPVC white colour sliding
window comprising of uPVC multi-chambered
frame having section Frame 58mm x 49mm,
Window sash: 37mm x 61mm, made out of
lead free green profiles with corners fusion
welded, fully reinforced with Galvanized steel
1.5/2.0 mm. The windows profile should fulfill
the requirements of Viny 2010. The physical
properties of the profiles like Vicat softening
temperature, density, tensile strength,
hardness, weatherability, impact strength and
Modulus of Elasticity should be tested in
accordance with ASTM/DIN-ISO standards and
431 55 the thermal conductivity as per IS standards. 0 0.00 0.00 0.00
The window comprising of uPVC extruded
glazing beads of appropriate dimension, EPDM
gasket, G.I fasteners 100 x 8 mm size for
fixing frame to finished wall, plastic packers,
plastic caps and necessary stainless steel
screws etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled
with weather proof silicon sealant over backer
rod of required size. The sash will be fitted
with 5mm clear glass ( float ).complete in all
respect as per specification and direction of
the Engineer in Charge. etc. complete
Supplying and Fixing of M.S. Grills, M.S.Doors,
M.S. Gate etc including cost,conveyance of all
434 58 materials,priming,and labour for fitting fixing 0 0.00 0.00 0.00
etc.complete as per the instruction of Engineer-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall surface
of approved make and shade including sand
papering, applying putty wherever necessary
437 61 & cost of scaffolding, staging charges with 0 0.00 0.00 0.00
cost, conveyance, taxes of all materials, cost
of all labour,labour cess T&P etc. complete as
per the direction of the Engineer-in-charge.
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
440 64 papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to receive
painting in walls, at all heights with staging
443 67 wherever necessary with cost, conveyance, 0 0.00 0.00 0.00
taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for the
work complete in all respect as per the
direction of the Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside surface
of walls finished with Acrylic Wall putty (water
based) of make (Birla / JK) and finished
smooth & even surface to receive painting
using roller to the final coat including cost of
446 70 scaffolding staging charges with cost, 0 0.00 0.00 0.00
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc.
complete for all floors as per specification &
direction of the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
Painting two coats with approved Enamel Paint
449 73 on wood work over a coat of Wood Primer in 0 0.00 0.00 0.00
Painting two coats with approved Enamel Paint
on Steel work in Ground Floor
453 77 Terrace floor Sqm 4.01 173.22 694.63
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting and fixing of Stainless steel
of 304 grade in hand ralling using 50mm dia
of 2mm thick circular pipe with Balustrade of
size 32mm X 32mm X 2mm @ 0.90mtr. C/C
and stainless square pipe bracing of size
454 78 32mm X 32mm X 2mm in 3 rows in stair case 0 0.00 0.00 0.00
as per approved design and specification,
buffing, polishing etc with cost, conveyance,
taxes, all materials, labour, T&P etc. required
for the complete in all respect.
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift and
stacking the soil upto a lead of 100 metre and
457 81 including dewatering, removing slush, shoring Cum 64.00 235.53 15,073.79
and strutting (as required), complete as per
specification and as directed by the Engineer-
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
458 82 exceeding 15cm in depth: consolidating each Cum 42.88 130.86 5,611.36
deposited layer by ramming and watering
complete (lead upto 100m) as directed by the
Engineer-In-charge.
Supplying of filling sand in foundation and
over areas including watering,ramming,
459 83 consolidating and dressing, labours, tools, Cum 32.00 811.13 25,956.22
taxes etc., all complete as per the specification
and direction of Engineer-In-charge.
Providing and laying plain cement concrete
1:4:8 (1 cement: 4 sand: 8 stone agregate
40mm nominal size) as levelling course in
460 84 foundation and plinth etc. including Cum 24.00 5897.88 1,41,549.02
tempering, curring ,shuttering etc.complete all
depth and height.
Providing and laying 80 mm thick factory
made cement concrete interlocking paver
block of M-35 grade made by block making
machine with storng vibratory compaction of
461 85 approved size, design & shape, laid in required Sqm 160.00 864.94 1,38,390.40
colour and pattern over and including 75mm
thick sand filling.as per drawing, specification
and direction of Engineer-In-charge.
Construction of cement concrete kerb with top
and bottom width 115 and 165 mm
respectively, 250 mm high in M 20 grade PCC
on M-10 grade foundation 150mm thick,
foundation having 50mm projection beyond
kerb stone, kerb stone laid with kerb laying
machine, foundation concrete laid manually,
all complete as per clause 408
Providing & Painting with synthetic enamel
paint of approved brand and manufacture to
463 87 give an even shade as per the instruction of Sqm 72.00 168.98 12,166.27
Engineer-In-Charge at all floors and all heights
including all material & labour complete.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Surface dressing of the ground including
removing Vegetation and making up
465 89 undulations and in-equalities not exceeding 15 Sqm 30.00 28.08 842.52
cms in depth/ height including disposal of
rubbish lead upto 50m
Supplying and stacking of good earth at site
466 90 including royalty and carriage upto 5 km lead Cum 15.00 608.41 9,126.12
Supplying and stacking sludge at site including
467 91 royalty and carriage upto 5 km lead complete. Cum 6.00 346.92 2,081.52
Uprooting weeds from the trenched area after
10 to 15 days of its flooding with water
including disposal of uprooted vegetation,
468 92 breaking clods and fine dressing the ground Sqm 9.00 5.78 52.04
including all materials and labour complete as
per direction of Engineer-In-Charge.
Providing and laying Neelgiri/Mexican grass
turf with earth 50mm to 60mm thickness of
existing ground prepared with proper level and
ramming with tools wooden (Dhurmos) and
than rolling the surface with light roller make
469 93 the surface smoothen and light waterning with Sqm 21.00 252.99 5,312.83
sprinkler and maintenance
for 30 days or more till the grass establish
properly, as per direction of officer-in-charge.
Providing & laying Selection no. 1 grass turf
with earth 50mm to 60mm thickness of
existing ground prepared with proper level and
ramming with required tools wooden and than
470 94 rolling the surface with light roller make the Sqm 9.00 103.25 929.25
surface smoothen and light watering the same
maintenance for 30 days or more till the grass
establish properly,as per direction of officer in
Provision of plantation all around the campus
with suitable Plants and Shurbs where
required including all material and labour
472 96 devil back bone shurbs Nos 4.00 59.00 236.00
473 97 Alpinia sanderae(10'' dia) Nos 4.00 106.20 424.80
474 98 Anthurium andreanum(10'' dia) Nos 4.00 106.20 424.80
475 99 Caladium bicolor(6'' dia) Nos 3.00 59.00 177.00
476 100 Calathea bella Nos 4.00 59.00 236.00
Provision of plantation all around the campus
with suitable tress where required including
all material and labour charge.
478 102 Araucaria bidwillii Nos 2.00 177.00 354.00
479 103 Cinnamomum camphora Nos 2.00 118.00 236.00
480 104 Cryptomeria japonica Nos 4.00 177.00 708.00
481 105 Cupressus sempervirens Nos 4.00 177.00 708.00
482 106 Filicium decipiens Nos 4.00 118.00 472.00
483 107 Murraya exotica Nos 4.00 118.00 472.00
Plantation of Trees, Shrubs, and Hedge at site
i/c watering and removal of unsaverieable
485 109 material’s as per direction of officer in charge Nos 44.00 7.55 332.32
(excluding cost of plant & water)
486 110 Sub-Total of Civil Works 0 0.00 0.00 75,46,058.47
487 0 Plumbing Works 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials , labour, T&P and fixing
rotational moulded polyethylene cylindrical
vertical water storage tanks conforming to
IS:12701/1996 including cutting holes through
the tank and fixing mild steel tubes and
fittings and providing extra sockets and jam
nuts, fixing ball valve etc. including hoisting
upto a height of 5 metres above ground level
and placing the tank to the required position
and providing 5.40 mtr. lengthx0.25 mtr width
KB brickwork in cement mortar (1:6) of
0.46m height in staging and 0.13mtr thick
circular protection wall of 0.46mtr height to
488 1 support the tank,12mm thick cement plaster 0 0.00 0.00 0.00
in cement mortar (1:6) over brick work, RCC
slab of size 1.60mX1.60m and 0.10m thick
,RCC beam of 0.25mx0.30m and 3.40m
average length in cement concrete (1:2:4)
using 12mm size crusher broken hard black
granite chips and required steel reinforcement
including centering and
shuttering,watering,curing ,cost of all
materials,conveyance of all materials to
worksite , payment of royalty, all taxes etc.all
complete as per approved drawing , P.H.
specification and direction of Engineer-in-
2000 liters capacity PVC water storage
supplying all materials, labour, T&P and
cutting holes through existing brick work
including making good the damages in cement
mortar (1:4) for taking G.I. Pipes and fittings/
490 3 P.V.C. pipes and fittings including watering, Each 12.00 57.35 688.18
curing, cost & conveyance of all materials to
worksite, payment of royality, taxes etc. all
complete as per direction of Engineer-in-
Supplying all materials , labour, T&P and
cutting holes in RCC floors and roofs upto
19cm thick for passing P.V.C pipes and G.I
491 4 fittings etc. , and repairing the holes after Each 6.00 193.28 1,159.70
insertion of pipe etc. with cement concrete
(1:2:4) including finishing complete so as to
make it leak-proof as per P.H. specification
and direction of Engineer-in-charge
Supplying all materials, labour, T&P and
cutting grooves in pucca floors and walls for
taking G.I./P.V.C. pipes and making good the
492 5 damages including watering , curing , cost & Mtr 35.00 221.96 7,768.53
conveyance of all materials to worksite,
payment of royality, taxes etc all complete as
per direction of the Engineer-in-charge.
Supplying all materials , labour, T&P and
cutting holes through existing brick or laterite
493 6 masonry wall for taking U-PVC pipes and Each 12.00 222.90 2,674.82
fittings including making good the damages
etc. all complete as per P.H. specification and
direction of Engineer-in-charge
Supplying all materials , labour, T&P and
cutting of RCC chajja for taking HCI or U-PVC
pipe and fittings including making good the
494 7 damages etc. all complete as per P.H. Each 10.00 137.82 1,378.24
specification and direction of Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials labour T&P filling sand
495 8 in lavatories well watered and rammed 0 0.00 0.00 0.00
including lead of materials to work site.
Supplying all materials, labour, T&P and
providing cement concrete ( 1:2:4 ) with
12mm size crusher broken hard black granite
497 10 chips including watering, curing,cost of all 0 0.00 0.00 0.00
materials, conveyance of all materials to work
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge
Supplying all materials, labour, T&P and
providing and fixing ceramic tiles in floors,
treads or steps and landing on 25mm thick
bed of cement mortar (1:1) ( 1 cement : 1
sand ) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
site , payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge ( ceramic floor
tiles of premium grade having thickness 7mm
to 8mm conforming to IS 13755 of size
30cmx30cm Kajaria/Jhonson/Orient make to
be pre-approved by the Engineer-in-charge )
Kajaria/Somany/Johnson tile
501 14 Ground floor Washrooms Sqm 16.78 1495.77 25,098.99
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:4) on
brick work including watering,curing,cost of all
502 15 materials, conveyance of all materials to 0 0.00 0.00 0.00
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Ground floor - (Qnty same as Wall Tiles in
Supplying all materials, labour, T&P and
providing and fixing porcelain glazed tiles in
dado skirting on 12mm thick cement plaster
(1:3) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
504 17 site , payment of royalty, all taxes etc all 0 0.00 0.00 0.00
complete as per P.W.D specification and
direction of Engineer-in-charge( ceramic wall
tiles of premium grade having thickness
6.5mm to 6.7mm conforming to IS 13753 of
size 30cmx45cm Kajaria/Jhonson/Orient make
to be pre-approved by the Engineer-in-charge
Kajaria/Somany/Johnson tile
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and laying
in trenches (to level or slope) unplasticized
P.V.C. pipe conforming to IS 4985/2000 of the
following out side dia for class- 3 (0.60mpa )
including jointing with supply of approved
solvent cement by non-heat application
507 20 method/as per manufacture's specification, 0 0.00 0.00 0.00
provoding and laying in trench cement
concrete (1:4:8) with 40mm size hard granite
metal in the type C-1 standard bedding
surrounding or encasing including concrete for
bedding and curing etc all complete as per
P.H. specification and direction of the Engineer
Supplying all materials ,labour ,T&P and
constructing Inspection Chamber of inside
size 760mmx760mmx460mm with cement
concrete (1:3:6) using 40mm size crusher
broken hard black granite metal on bed , KB
brick work in cement mortar (1:6) in
foundation and plinth, moulding and shaping
the channel inside and benching with cement
concrete (1:2:4) using 12mm size crusher
broken hard black granite chips, 12mm thick
510 23 cement plaster (1:3) with cement punning to 0 0.00 0.00 0.00
inside, cement flush pointing (1:3) to outside,
R.C.C cover slab (1:2:4) using 12mm size
crusher broken hard black granite chips with
R.C.C man hole cover, earth work in
excavation in all kinds of soil and refilling the
cavity around the chamber including
watering,curing,cost of all materials,
conveyance of all materials to worksite,
payment of royalty,all taxes etc.all complete
as per approved drawing, P.H specification
and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia
Supplying all materials labor T&P and
constructing MH chamber of sizes earth work
in excavation in all kinds of soil CC(1:1:8) with
black granite chips size 46mm brick work with
K.B. brick having crossing strength not less
than 75 Kg /CM2 to 90 Kg/CM2s in
CM(1:6)12mm C.P(1:8) inside MH chamber
over benching with cement slush pointing
(1:3)outside the MH chamber providing
painting MS or CI step iron RCC(roof of slab
with CC(1:2:4)with black granite chips size
12mm bending binding tying the grills placing
of the reinforcement providing RCC color of
required size refilling the cavity around the MH
chamber with excavated earth including
channeling the bed of MH etc all complete as
per PH specification.
MH size 0.91m x 0.91 m with 0.45 m (18” dia
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials labour T&P and
constructing 1.40m dia x 2.00 m deep soak
way pit with dry brick having crossing strength
not less than 75Kg/CM2 to 99Kg/CM2 in
CM(1:6) for the remaining 0.4572mm height
of wall at top CC(1:3)inside and outside inside
fill with dry brick khoa size 38mm ,CM thick
514 27 RCC perforated slab to a height of 1.9012m Each 1.00 23755.05 23,755.05
from bottom covered by means of 50mmthick
RCC wall cover in pieces filled with iron plugs
including earth work in excavation refilling of
cavity around the pit and painting the iron
works complete as per PHD design and
specification including carriage of all materials
Supplying all materials ,labour ,T&P and
constructing gully trap chamber of inside size
250mmx250mm with 8cm thick RCC precast
cover slab in cement concrete (1:2:4) mix
using 12mm size crusher broken HG chips,
foundation concrete (1:4:8) using 40mm size
crusher broken HG metal on bed and around
trap, KB brick work in cement mortar (1:6) in
foundation and plinth and inside 12mm thick
cement plastering (1:3) finished with a
floating coat of neat cement including fixing
100mmx100mm size HCI gully trap,
150mmX150mm size CI grating etc.all
complete as per drawing, specification and
direction of Engineer-in-charge
516 29 1 no 30 Users Septic tank 0 0.00 0.00 0.00
Earth work in excavation of foundation in all
kinds of soil within 50m initial lead and 1.5m
initial lift including rough dressing & breaking
517 30 clods to maximum 5cm to 7cm and laying in cum 12.82 254.75 3,265.90
layers not exceeding 0.30m in depth and as
per direction of the Engineer-in-Charge.
Extra lifts of 1.50 mtr or part thereof over the
initial lift of 1.5 mtr in all kinds of
embankments and road works and ordinary
earthwork in general.
Supplying all materials, labour, T&P and
providing cement concrete (1:3:6) with 4cm
size hard granite metal including watering,
519 32 curing, conveyance of all materials to cum 0.68 6298.96 4,283.29
worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing cement concrete (1:2:4) with 12m
size hard broken granite chips including
520 33 watering, curing, conveyance of all materials cum 1.56 8225.19 12,831.30
to worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing cement concrete (1:1½:3) with
12mm size crusher broken hard black granite
chips for RCC works including hoisting, laying,
521 34 watering, curing,cost of all materials, cum 0.61 9358.46 5,708.66
conveyance of all materials to worksite,
payment of royalty,all taxes etc. all complete
as per PWD specification and direction of the
Engineer in charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing steel reinforcement of Fe-415 /Fe-
500 grade for RCC work including
cutting,bending,binding and tying the grills
522 35 and placing in position including cost of Qntl 0.49 10438.63 5,114.93
binding wire 18 to 20 gauge,cost of steel,
conveyance of all materials to worksite,
payment of royalty,all taxes etc all complete
as per PWD specification and direction of the
Engineer-in-charge.
Supplying all materials, labour, T&P and
providing rigid & smooth centering and
shuttering for RCC works including false work
523 36 and dismantling them after casting including 0 0.00 0.00 0.00
conveyance of all materials to worksite,
payment of royalty, taxes etc. all complete as
per specification and direction of the Engineer-
RCC floor, roof slab chhaja up to 4.430 m
Supplying all materials.labour.T&P and
providing brick work in foundation and plinth
with KB bricks having curshing strength not
less than 75 kg/sqcm with dimensional
tolerance+ 8% in cement mortar ( 1:3 )
525 38 including watering,curing,cost of all cum 5.76 6113.11 35,211.50
materials,conveyance of all materials to
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer in charge.
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:3) on
brick work including watering,curing,cost of all
526 39 materials, conveyance of all materials to sqm 39.30 222.31 8,736.86
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
providing cement punning including watering,
curing, conveyance of all materials to
527 40 worksite, payment of royalty, taxes etc all sqm 16.17 42.48 686.90
complete as per specification and direction of
the Engineer in charge
Supplying all materials labour T&P and fitting
and fixing 12mm dia MS/CI step iron including
528 41 supply of necessary CC(1:2:4) for fixing etc. Each 5.00 314.12 1,570.58
complete as per PH specification.
Supplying all materials, labour T&P for
providing fitting & fixing 100mm x 100mm SW
Tee in wall including filling the recess with
cement concrete (1:2:4) with 12mm size HG
529 42 chips all complete including watering curing Each 2.00 461.50 923.00
conveyance of all materials to work site
payment of royalty all complete as per
specification and direction of Engineer in
Supplying all materials labor T&P filling sand in
foundation and plinth with well watered and
rammed etc all complete as per direction of
Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
PVC pipes conforming to ASTM-D-1785/89 of
531 44 the following nominal bore, tube fittings and 0 0.00 0.00 0.00
clamps including making the wall good. ceiling
and floor, testing all complete as per
specification and direction of the Engineer in
charge.(Oriplast/Supreme/Finolex)
532 45 20mm dia PVC ASTM pipe (sch-80) Mtrs. 30.00 161.66 4,849.80
533 46 25mm dia PVC ASTM pipe (sch-80) Mtrs. 60.00 221.96 13,317.48
534 47 32mm dia PVC ASTM pipe (sch-80) Mtrs. 50.00 291.70 14,584.80
535 48 40mm dia PVC ASTM pipe (sch-80) Mtrs. 40.00 383.50 15,340.00
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes conforming to
IS:15778, having thermal stability for hot &
cold water supply, including all CPVC plain &
536 49 brass threaded fittings including fixing the pipe 0 0.00 0.00 0.00
with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC
solvent cement and testing of joints complete
as per direction of Engineer-in-Charge
Supplying all materials, labour T&P and fitting
and fixing brass/CP fittings of the following
nominal bore with supply of all joiniting
538 51 materials including cost & conveyance of all 0 0.00 0.00 0.00
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Con-CHR-
053KN Jaquar make)
15mm dia CP two in one bib cock (Con-CHR-
041KN Jaquar make)
15mm dia CP Bib cock (Con-CHR-047KN
15mm dia CP Long Body Bib cock (Con-CHR-
107KN Jaquar make)
15 mm dia CP Bib cock Elbow Action (Plaza
20mm dia CP concealed stop cock(Plaza Make)
25mm dia brass full way valve (Shakti make)
32mm dia brass full way valve (Shakti make)
40mm dia brass full way valve (Shakti make)
15mm dia CP Health faucet (Con-ALD-MCH-
573 Jaquar make)
549 62 15mm CP Extension piece Each 33.00 69.97 2,309.14
551 64 15mm size C.P. flange Each 33.00 47.55 1,569.28
Supplying all materials, labour, T&P and fitting
and fixing U-PVC SWR soil waste ventilating
pipes and fittings of the following outside
diameter conforming to ISI No 13592/1992 to
walls with nails, bobbins and wooden plugs or
laying in trenches including jointing with
552 65 supply of approved rubber lubricant by non- 0 0.00 0.00 0.00
heat application method/as per manufacturer's
specification, testing, earthwork in excavation
in all kinds of soil and refilling of trenches ,
cost & conveyance of all materials to worksite,
payment of taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
110mm U-PVC SWR Pipe (Supreme/Ashirvad)
110mm U-PVC ‘P’ Trap(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC door bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Door tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC offset without ear(Ori
Plast/Finolex/Supreme Make)
100mm U-PVC Cowl(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC S/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC D/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Socket(Ori
Plast/Finolex/Supreme Make)
Supplying all materials, labour, T&P and fixing
vitreous china water closet, squatting pan
(Indian type W.C pan/Orissa pattern squatting
pan) duly embedded in cement concrete
(1:5:10) using 4cm size hard granite metal
including fixing a pair of vitreous china
250mm x 130mm x30mm footrest, fixing
100mm dia HCI 'p' or 's' trap (with/without
50mm dia horn) for water colset squatting pan
including jointing the trap with pan in cement
mortar (1:1) cutting the floor and mending
good the damages , cost & conveyance of all
materials to worksite, payment of royality ,
taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
580mm size Orissa pan
(Hindware/Parryware/Neycer make)
Supplying all materials, labour, T&P and fixing
the following vitreous china Wash Down Water
Closet(European type W.C. pan)with integral
'p' or 's' trap to the floor with wooden plug and
chromium plated pedestal screws including
566 79 jointing the trap with soil pipe in cement 0 0.00 0.00 0.00
mortar (1:1) fixing plastic seat and cover for
wash down water closet with chromium plated
brass hinges and rubber buffers including
polishing , cost & conveyance of all materials
to worksite, payment of royality, taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
European water closet with 's' trap
plain(Hindware/Parryware/Neycer make)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour T&P and and
fixing 12.50 liters/10 liters capacity low level
flushing cistern with a pair of cast iron or M.S.
brackets complete with fittings such as
siphonic arrangements 15mm nominal size
brass/pvc ball valve with polythene float CP
brass handle,unions and couplings for
connection with inlet, outlet and overflow
pipes, 32mm dia CP long flush bend, 15mm
dia pvc inlet connection pipe including cutting
holes and making good the same and
connecting the flush bend with cistern and
closet and connceting the inlet pipe with
suupply main , cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm.
569 82 Dia CP long flush bend ( Slimline-white- Each 5.00 1853.07 9,265.36
Parryware make )
Supplying all materials, labour T&P and fixing
wash basins with hole for pillar taps with cast
iron or M.S.brackets painted white including
cutting holes in walls and making good the
damages with supply of wooden plugs, screws
and cement etc, fixing pedestal for wash basin
recessed at the back for the reception of pipes
and fittings, fixing PVC waste pipe of 32mm
nominal diameter for wash basin including
570 83 brass check nut complete, fixing pillar taps 0 0.00 0.00 0.00
capstan head screw down high pressure
lettered 'Hot' and 'Cold' with long screws,
shanks and back nuts of 15mm dia nominal
bore, fixing 15mm dia PVC inlet connection
pipe and making connection with pillar cocks
and supply mains for wash basin, fixing 32mm
dia CP brass waste, cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as perP.H specification and
direction of the Engineer-in-charge
550mmx400mm W.H.basin
(Hindware/Parryware/Neycer make)with
571 84 15mm dia C.P.pillar cock (Jaquar make) with Each 6.00 6245.27 37,471.61
Supplying all materials, labour, T&P for fitting
& fixing Kitchen sink of all standard sizes with
572 85 a pair of bracket, C.P. waste, trap & P.V.C. Each 3.00 5843.48 17,530.43
waste pipe & painting brackets including
supply of cement concrete & mortar etc. all
complete. 24” x 18” x 10” sink
Supplying all materials, labour, T&P and fixing
standard sized CP towel rail complete with CP
573 86 brass brackets fixed to wooden plugs with CP 0 0.00 0.00 0.00
screws as per specification and direction of the
Engineer in charge
574 87 25mmx600mm long CP towel rail Each 5.00 827.65 4,138.26
Supplying all materials, labour, T&P and fixing
standard sized glass-shelf with CP brass
brackets and guard rail complete fixed to
576 89 wooden plugs with CP screws as per 0 0.00 0.00 0.00
specification and direction of Engineer in
577 90 600mmx125mm plate glass shelf Each 6.00 711.89 4,271.36
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing
mirror of superior glass mounted on
578 91 6mm.thick A.C. sheet or ply wood sheet and 0 0.00 0.00 0.00
fixed to wooden plugs with CP screws and
washers complete as per specification and
direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled
Supplying all materials, labour, T&P and fixing
CP soap holder complete with CP brass
580 93 brackets fixed to wooden plugs with CP screws 0 0.00 0.00 0.00
as per specification and direction of the
Engineer in charge
581 94 CP soap holder Each 8.00 212.05 1,696.37
Supplying all materials labor T&P & Fitting &
fixing CP shower with rim with supply of red
582 95 lead and yarn nail complete as per direction of 0 0.00 0.00 0.00
Engineer in charge.
Providing fitting, fixing of Aluminium door with
anodized AL. door section of 9202 as vertical
member,9201 as top and 9200 as middle
bottom member with frame section No. 9221
584 97 and tapered clip no. 4660 and the frame to be Sqm 9.45 6065.64 57,320.27
completed by means of jointing angle No.
1855 Including all Cost of Labour. T&P hire
charges of drilling machine. labour charges
etc. complete. 53 x 1.625
Fitting & fixing of Aquagurad Cooler Cum
585 98 Purifier for drinking water privision. 0 0.00 0.00 0.00
586 99 Cost of Aquaguard Cooler - Cum Purifier Each 1.00 57230.00 57,230.00
Construction of 1nos production wells
including scientific source finding
through consolidated and unconsolidated
587 100 rock with down the hammer drilling rig 0 0.00 0.00 0.00
or combination rig with PVC pipe and
installation of submersible pump set with
Labour for drilling a perfectly vertical bore hole
of specified dia for a specified depth below
ground level through consolidated and
unconsolidated rock with down the hole
hammer drilling rig or combination rig as
required to suit the site condition as per the
direction of the Engineer in charge including
use of own rig with its accessories, tools and
plant and consumables etc for lowering of
200mm/150mm dia G.I/P.V.C/M.S casing
pipes for housing fitted with socket and with or
without well screen as per the necessity for
soft, medium, hard and boulder formation
(G.I/ P.V.C/ M.S casing pipes if required to
prevent collapse of overburden is to be
provided by the contractor including lowering
and withdrawing after completion of the tube
well), 200mm dia to 400mm dia in overburden
portion including packing of gravel supplied by
the contractor for 400mm dia bore only
589 102 Drilling of 200mm dia bore 0 0.00 0.00 0.00
592 105 Drilling of 150mm dia bore 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Lowering the following size of G.I/P.V.C/M.S
housing pipes with or without slotted pipes as
per the necessity from ground level up to
45.00m depth and fitted and fixed up in
perfectly vertical position including cutting and
594 107 threading of pipes and slotted pipes and 0 0.00 0.00 0.00
supplying and fixing all jointing materials,
tools and plant etc all complete and keeping
the top of casing pipe threaded including
plugging tube wells to prevent entry of foreign
595 108 Lowering of 200mm dia P.V.C casing pipes 0 0.00 0.00 0.00
Supplying polyvinyl chloride pipes as per ASTM-
D-1785-89 having threads in accordance with
DIN 2999 part-1/DIN-42225 part-II
specification length of pipe (laying length) will
be 3 mtrs. The pipes shall be supplied with
both external and threaded with free socket.
The pipe having external thread at one end i.e
female and or belled end. The female end
having internal thread is to be belled in order
to accept the male end while jointing pipes
with a bore threading shall be provided with a
greave at the roof of the male thread
accomodate flexible PVC/Rubber 'O' ring to
make the joint water tight colour of the pipe
shall be blue. The name of the manufacture
along with batch No class of pipe shall be
stranded legibly of each pipe length.
Supplying all materials, labour, T&P and
providing and providing sanitary sealing by
cement concrete grouting of annular space
around GI/PVC/MS housing pipe upto 5m
below ground level (as per drawing) to plug
the bore hole excluding cost of cement all
600 113 complete as per direction of the Engineer in Each 1.00 931.96 931.96
charge. Minimum one metre of casing pipe to
be inserted in the bore into the rock at the
bottom to ensure sanitary sealing (excluding
cost of cement which will be supplied directly
by the department)
Cleaning and developing the tube well with
supply of compressor worked till clear and
601 114 adequate discharge is obtained from the tube 0 0.00 0.00 0.00
well including supply and use of all necessary
equipment and labour as per direction of the
Engineer in charge
Supplying all materials, equipment, labour &
conducting reconnaissance survey, integrated
Hydrological and Geophysical (Electrical
Resistivity Method) survey & selection of
603 116 potential source for exploration of Ground 0 0.00 0.00 0.00
Water including selection and recommendation
of site for drilling wells in selected locations in
any part of Orissa under the following
Geological formation:
Rocky terrain with boulder formation for 300m depth
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing, fitting and fixing submersible pump
with squirrel cage induction type submersible
type submersible electric motor to run on 3
phase/1 phase line voltage ranging from 320
volt to 450 volt conforming to IS: 8034/89
with following specifications with suitable
control panel, jointing with GI/PVC/HDPE
pipes, electrification, testing, commissioning,
trial running, conveyance of all materials to
worksite, payment of taxes etc all complete as
per specification and direction of the Engineer
in charge (Texmo/Crompton Greaves/Kirloskar
1 H.P. Single phase/ three phase 3 stage
head renge of 20 to 35 mtr with discharge
606 119 capasity 145 to 110 L.P.M With outlet dia 25 Each 1.00 19749.90 19,749.90
mm (keeping 100% standby)
607 120 DOL Control panel Each 1.00 4490.49 4,490.49
608 121 40mm dia steel short piece Each 1.00 179.71 179.71
610 123 50mm size CI bracket Pair 1.00 107.73 107.73
612 125 20mm dia rigid UPVC pipes Mtr 30.00 8.14 244.26
613 126 Steel rope with cover Mtr 30.00 31.51 945.18
614 127 Labour charges for lowering including transportation
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
HDPE pipes and pipe fittings conforming to IS:
4984/2000 (10kgf/sqcm) of the following
615 128 nominal bore with clamps and jointing by 0 0.00 0.00 0.00
Fusion welding method including testing,
making good the wall, ceiling and floor all
complete as per specification and direction of
the Engineer in charge
616 129 32mm HDPE pipes (Finolex/Supreme make) mtr 91.20 117.76 10,739.61
617 130 Sub-Total of Plumbing Works 0 0.00 0.00 12,98,000.73
618 0 Electrical Works 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Point wiring in Recessed wirring to light point/
fan point/ exhaust fan point/ call bell point
with 1.5 sq.mm FRLSH/LSZH PVC insulated
copper conductor of ISI marked
Finolex/Anchor/Polycab/HAVELLS or
equievalant reputed make A catagory ISI
marked as approved as approved 20 mm dia
PVC flexible non metallic conduit FRLS type
ISI marked Make-AKG/Anchor/Kinjal or
equievalant reputed make A catagory ISI
marked as approved with 6A modular type((
falme retradant type)) switch ISI marked
Make-Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
619 1 make & model A catagory ISI marked as 0 0.00 0.00 0.00
approved, and ceiling rose ISI marked
Make-Schneider(Zencelo)/legrand( myrius)
/Panasonic (Equievalant model) or equievalant
reputed make & model A catagory ISI marked
as approved of modular type G.I box with
metallic cover plate (both side) falme
retradant type) Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved, of suitable size, modular box with
1.5 sq. Mm FRLS PVC insulated single core
multistandard copper conductor as earth wire
including all accessories and connection as per
direction of Engineer -in -Charge. CATAGORY
Group control of point in Recessed wirring to
light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked
Finolex/Anchor/Polycab/HAVELLS or
equievalant reputed make A catagory ISI
marked as approved as approved 20 mm dia
PVC flexible non metallic conduit FRLS type
ISI marked Make-AKG/Anchor/Kinjal or
equievalant reputed make A catagory ISI
marked as approved with 6A modular type((
falme retradant type)) switch ISI marked
Make-Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
623 5 make & model A catagory ISI marked as Nos 12.00 1200.06 14,400.72
approved, and ceiling rose ISI marked
Make-Schneider(Zencelo)/legrand( myrius)
/Panasonic (Equievalant model) or equievalant
reputed make & model A catagory ISI marked
as approved of modular type G.I box with
metallic cover plate (both side) falme
retradant type) Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved, of suitable size, modular box with
1.5 sq. Mm FRLS PVC insulated single core
multistandard copper conductor as earth wire
including all accessories and connection as per
direction of Engineer -in -Charge. CATAGORY
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying ,fixing of 6A Plug on the same
board in existing switch board with complete
fitting by 01 no of 6A switch & socket
(modular type)( ( falme retradant type)) &
other required accessories of ISI marked as
approved as per direction of Engg. -in -
Charge. Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
reputed make & model A catagory ISI marked
as approved, complete suitable for for
HOSTEL.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( ( falme
retradant type)) with suitable size modular
box & cover( falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
625 7 make & model ISI marked as approved , Nos 14.00 597.08 8,359.12
complete suitable for Residence.(Maximum 02
nos point in one circuit).All the switches &
sockets should be warrantied for a period of
10 years against manufacturing defects
against which ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying,fixing of 1x16A Plug on the
separate board with complete fitting by 01 no
of 16A switch & socket(modular type)( falme
retradant type)) with suitable size modular
box & cover( falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge.. Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision)or equievalant
reputed make A catagory ISI marked as
approved, (For equipement power)All the
switches & sockets should be warrantied for a
replacement period of 10 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Receass wiring for circuit/submain wiring with
the following mentioned size PVC FRLSH/LSZH
insulated, copper conductor, single core cable
(Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE)
or equievalant reputed make A catagory ISI
marked as approved, in recessed PVC conduit
Heavy duty FRLS of mentioned size
(AKG/Anchor/Kinjal or equievalant ISI
marked as approved) as required as per
direction of Engg.-in-Charge. Ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free after sales service within warranty
period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
628 10 sq. mm copper wire for earth continuty Mtr 100.00 153.40 15,340.00
conductor. In 20 mm dia non metallic heavy
duty flexible conduit (LDB to LSB/LIGHT
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
629 11 conductor in 20 mm dia non metallic heavy Mtr 211.00 169.92 35,853.12
duty flexible conduit.(BDB to LSB/LIGHT
CKT/5A PLUG/INVERTER POINT TO EACH
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core
630 12 2.5 sq. mm copper wire for earth continuty Mtr 155.00 307.98 47,736.90
conductor .in 25 mm dia non metallic heavy
duty flexible conduit(LDB to LSB/5A SOCKET)
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
duty flexible conduit .(PDB to PSB/ GAYSER
POINT/AC POINT/ROOM LIGHT CONTROL TO
CORRIDOOR POINT/DG PANEL ESSENTIAL
LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
632 14 conductor in 32 mm dia non metallic heavy Mtr 25.00 287.92 7,198.00
duty flexible conduit.(PDB to PSB/GAYSER.
POINT/AC POINT/DG PANEL ACCL TO EACH
QTR ESSENTIAL LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core 2.5
633 15 sq. mm copper wire for earth continuty Mtr 16.00 226.56 3,624.96
conductor in 25 mm dia non metallic heavy
duty flexible conduit .(LFDB TO LBDB)
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic heavy
duty flexible conduit.(LFDB TO LBDB/power
unit/point) (4X6+2X2.5)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core 4
sq. mm copper wire for earth continuty
conductorin 32 mm dia non metallic heavy
duty flexible conduit .(LFDB TO FLOOR PANEL
TO TPN BDB light ) (4X10+2X4)
Supplying and fixing 20 amps, 240 volts, SPN,
industrial type socket outlet, with 2 pole and
earth metal enclosed plug top along with 32
amps. C-series, SP MCB, in sheet steel
enclosure, on surface or in recess, with
chained metal cover for the socket outlet, and
complete with connections, testing and
commissioning etc. as required as per
direction of Engg.-in-Charge.. . Make-
Legrand/Schneider/Siemens/panasonic or
equievalant reputed make & model A catagory
ISI marked as approved,All the Components
should be warrantied for a replacement period
of 5 years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying and fixing following size/ modules,
GI box along with modular base & metallic
cover plate (both side) plate for modular
switches in recess etc as required as per
direction of Engg.-in-Charge. MAKE-
Legrand/Siemens/Anchor/Panasonic/
Schneider or equievalant reputed make &
637 19 model A catagory ISI marked as approved .All 0 0.00 0.00 0.00
the Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI marked
along with accessories in surface/recess
including cutting the wall and making good the
same in case of recessed conduit as required
as per direction of Engg.-in-Charge .MAKE
KINJAL/ AKG/Anchor or equievalant reputed
make A catagory ISI marked as approved
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply and fixing modular type indicator on
the existing switch box/cover . Equievalant
higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved as required
as per direction of Engg.-in-Charge.All the
Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying and installation of AC starter
Modular type, Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved coil voltage-
415 Volt A.C. & O/L range of 9-14A range on
mod Box of suitable size including modular
645 27 coveras required as per direction of Engg.-in- Nos 5.00 724.52 3,622.60
Charge .All the Components should be
warrantied for a replacement period of 5 years
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Supply and fixing CALL bell (Ding dong type)
/Buzzer on the existing switch box/cover.
Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved .as required
as per direction of Engg.-in-Charge.All the
Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
S/F of Bakelite angle holder/batten holder
(make-Anchor/Havells/Panasonic or
equievalant reputed make A catagory ISI
marked as approved )of ISI marked
conforming to IS-1258/1987 in place of ceiling
rose as per direction of Engg.-in-Charge .All
647 29 the Components should be warrantied for a each 12.00 70.80 849.60
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of Blanking plate(modular
type)( falme retradant type)) in existing
switch box(anti bactorial & falme retradant
type) including supplying of all required
accessories of ISI marked as approved as per
direction of engg-in-charge..Make-
Schneider(Zencelo)/legrand( Arteor)
648 30 /Panasonic (vision), complete suitable for IPH Nos 12.00 49.56 594.72
standard hospital.It should be warrantied for
a period of 10 years against manufacturing
defects against which ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
649 31 Sub-Head II (Light fitting Fixture & Fan) 0 0.00 0.00 0.00
Supplying, installation, of exhaust fan of
heavy duty 300 mm sweep (Make-
Equievalant higher model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha/Hal
onix or equievalant reputed make & model A
catagory ISI marked as approved ) of
exhaust fan in the existing wall, including
fixing & conntection as required as per
direction of Engg.-in-Charge. Replacement
Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1400 mm sweep white/milky
colour ceiling fan Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha/Hal
onix or equievalant reputed make & model A
651 33 catagory ISI marked as approved ) including Nos 8.00 2374.16 18,993.28
wiring the down rod of standard length (upto
30 cm) with 1.5 sq mm PVC insulated, copper
conductor, single core cable etc. as
required.(With fan Regulator) as required as
per direction of Engg.-in-Charge.Replacement
Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1200 mm sweep white/milky
colour ceiling fan Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha
/Halonix or equievalant reputed make & model
652 34 A catagory ISI marked as approved ) Nos 15.00 2361.18 35,417.70
including wiring the down rod of standard
length (upto 30 cm) with 1.5 sq mm PVC
insulated, copper conductor, single core cable
etc. as required as per direction of Engg.-in-
Charge,Replacement Warranty will be 5
years.. .(With fan Regulator)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
surface mounted square shape 18 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting
distribution with wattage not more than 20
watt and lumen output of 1500 lumens, , CRI
not less than 80,CCT of 6000 degree K,THD
less than 10%, with electronic driver, internal
surge protection of 2.5 KV , L70 B50: 30000
hrs (2 yrs warranty) and all other accessories
suitable for operation on 220 V to 240 V
supply as required as per direction of Engg.-in-
Charge. ( Make : (Make: wipro LD80-171-60-
XX-SM or similar model of LT/Trilux
/Philips/Panasonic/HALONIX or equievalant
reputed make & model A catagory ISI marked
as approved).The luminaire should be
Replacement Warranty will be 5 years
SITC of energy efficient LED tube light fittings
with decorative alluminium batten and LED
tube light having power rating not more than
20 watt and lumen output not less than 2200
lumen complete with electronic driver and all
other accessories with diffuser having 5 years
warranty i/c connection etc as required as
per direction of Engg.-in-Charge. ( (Make:
wipro LL20-221 --or similar model of
LT/Trilux /Philips/Panasonic/HALONIX or
equievalantreputed make & model A catagory
ISI marked as approved.). The luminaire
should be Replacement Warranty will be 5
SITC of Sleek LED 10-12 watt mirror light
fitting with extruded polycarbonate
housing,High optically efficient diffuser,above
wash basin complete with all accessoriesetc.
directly on wall, including connection with 1.5
sq. mm FRLS PVC insulated, copper conductor,
single core cable and earthing etc. as required
as per direction of Engg.-in-Charge.
( Make : WIPRO Model No:LL20-111-XXX-60-
NE or similar model of
PHILIPS/Panasonic/HALONIX or equievalant
reputed make & model A catagory ISI marked
as approved. )The luminaire should be
Replacement Warranty will be 5 years
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white
powder coated ,pressure die-cast Al housing
,with high transmititivity,non-yellowing PMMA
diffuser, with wattage not more than 20 watt
and lumen output not less than 2600 Lumen (
120 lumens/watt ) of size240 x240 x 40 mm ,
,CRI not less than 80,CCT of 5700-6500
degree K,THD less than 10%, with Non
integrated isolated driver (protects the output
/secondary side from any disturbance on the
656 38 input / primary side ensuring safe operation), Nos 21.00 2357.64 49,510.44
all other accessories , life : 50,000 burning
hours (5 years warranty) , Internal surge
protection of 3 KV suitable for operation on
230 V, 50 Hz supply as required as per
direction of Engg.-in-Charge. (Make: wipro
LDB1-171-XXX-60-SM or similar model of
LT/Trilux /Philips/Panasonic/HALONIX or
equievalant reputed make & model A catagory
ISI marked as approved.) The luminaire
should be Replacement Warranty will be 5
Supplying, installation, testing and
commssioning of 400 mm sweep wall fan
Make-Equievalant higher model with 3 star
Havells/almonard/Anchor/Panasonic/Usha/Hal
657 39 onix or equievalant reputed make & model A Nos 2.00 2542.90 5,085.80
catagory ISI marked as approved ) including
wiring with 1.5 sq mm PVC insulated, copper
conductor, single core cable etc. as required
as required as per direction of Engg.-in-
Charge.Replacement Warranty will be 5 years.
Supplying and fixing extra conduit down rod of
20 cm length G.I. pipe 15 mm dia, heavy
gauge including painting etc. as requiredas
658 40 required as per direction of Engg.-in-Charge . Nos 25.00 37.76 944.00
(Note : More than 5 cm length shall be
rounded to the nearest 10 cm and 5 cm or less
shall be ignored)of ISI mark as approved.
659 41 BDBS,DB,AC DB,FLOOR PANELS,MCBS 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of following mentioned
way, three pole/single pole and neutral, sheet
steel,double door MCB distribution board, 415
volts/240 volts shall be as per IEC 61439-
3,integrated door earthing system offering
additional safety to the user,High quality
polyurethane Gasket,the box and cover shall
be fabricated to withstand IK09,the DB should
be properly pre-treated with 7 tank process
and duly powder coated, phosphatized with
powder coated finish, on surface/recess,
complete with terminal blocks,with suitable
size FR PVC insulated copper conducter up to
terminal blocks, tinned copper busbar, neutral
busbar, earth bar, din bar. Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/ Schneider-
Acti 9/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
as approved. as per direction of Engg.-in-
Charge. The Distribution boards should be
Replacement Warranty will be 5 years
4 Way(8+12) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting with
100A Copper Bus Bar for each phase, with
661 43 neutral Bus bar, Earth Bar & Cable ties for Nos 2.00 2553.52 5,107.04
cable management, prefitted masking sheet,
IP43-IK09 with metal door(FOR LIGHT,POWER
INDOOR,3-PH,POWER LOAD) Warranty on DB
Supply and fixing of 12 way DD single pole
and neutral sheet steel MCB distribution board
250V on surface/recess complete with tinned
copper bus bar, neutral bus bar, earth bar, din
bar, detachable gland plate, interconnections,
phosphatized and powder painted including
earthing etc. as required (but with out MCB/
RCCB/ Isolator) (ALL LIGHT WITH
CORRIDOOR/COMMON AREA,EM LIGHT,UPS
LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
door)(only each EM. CONNECTION UPS LOAD)
Supplying and fixing 20 amps rating, 240
volts, C series, Double poles MCB of Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
664 46 as approved in the existing MCB DB complete Nos 1.00 395.30 395.30
with connections as per direction of Engg.-in-
Charge. The MCB should be Replacement
Warranty will be 5 years .MCB should have the
fault indication system in different colour for
ON, OFF & TRIP condition or Mid trip position
for Trip conditions for easier identification of
fault.Warranty on MCB is 5 years.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 6 amps to 32 amps
rating, 240 volts, C series, single poles MCB of
Make-LEGRAND-Ekinox3 DB/ Siemens-
Betaguard/ Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
665 47 as approved. the existing MCB DB complete Nos 36.00 155.76 5,607.36
with connections as per direction of Engg.-in-
Charge. The MCB should be Replacement
Warranty will be 5 years.MCB should have the
fault indication system in different colour for
ON, OFF & TRIP condition or Mid trip position
for Trip conditions for easier identification of
fault.Warranty on MCB is 5 years.
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABBor equievalant reputed
666 48 make & model A catagory ISI marked as Nos 2.00 1990.66 3,981.32
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
667 49 make & model A catagory ISI marked as Nos 1.00 2270.32 2,270.32
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5
Supplying and fixing 63Amps TPN 415 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
668 50 approved in the existing MCB DB in the Nos 2.00 3114.02 6,228.04
existing MCB DB complete with connections as
per direction of Engg.-in-Charge.(for power
BDB & AC ODU, 8 way TPN BDB IC).The RCCB
should be Replacement Warranty will be 5
669 51 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C of materials and installation of pipe
earth electrode made out of 50mm dia class B
G.I. pipe of 3.0 metre long with arrangements
for fitting/ termination of G.I. flat / wire with
G. I. nut bolts & washers including cost of
burnt wood charcoal, salt, foreign soil, water
670 52 pouring arrangements, brick masonary Nos 3.00 3701.66 11,104.98
enclosure on top with removable RCC cover
complete with labour for excavation of pit in
all kinds of soil & rock as required and as per
direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Providing and fixing 4 mm dia copper wire on
671 53 surface or in recess for loop earthing as Mtr 33.00 112.10 3,699.30
required.as per direction of Engg.-in-Charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
CABLING AND END TERMINATION MAIN
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
674 56 following size cables as per direction of Engg.- 0 0.00 0.00 0.00
in-Charge. Ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free after
sales service within warranty period for
acceptance of materials
4core x 16 sq mm (MDB TO FDBL/FDBU
4 core x 4 sq mm (for small power/LIGHT TO
677 59 3.5core x 35 sq mm (To power MDB) Mtr 73.00 257.72 18,813.84
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in the
679 61 trench in one horizental formation including Mtr 20.00 151.04 3,020.80
excavation ,sand coushing protection covering
and refilling the trench etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
680 62 exceeding 25 SQ. MM direct in ground in the Mtr 30.00 48.38 1,451.40
EXISTING PIPE etc as required as per direction
of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
681 63 25 SQ. MM but not exceeding 400 SQ. MM Mtr 22.00 66.08 1,453.76
direct in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM in open duct etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
683 65 25 SQ. MM in open duct 400 SQ. MM direct in Mtr 8.00 53.10 424.80
ground in the EXISTING PIPE etc as required
as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
684 66 exceeding 25 SQ. MM in surface with shaddle Mtr 3.00 94.40 283.20
and screw etc as required as per direction of
Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
685 67 exceeding 120 SQ. MM From 25 SQ. MM in Mtr 2.00 149.86 299.72
surface with shaddle and screw etc as required
as per direction of Engg.-in -charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
686 68 exceeding 400 SQ. MM From 120 SQ. MM in Mtr 2.00 152.22 304.44
surface with shaddle and screw etc as required
as per direction of Engg.-in -charge.
Supplying and making end termination with
brass compression gland and aluminium lugs
for following mentioned size cable.as per
direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia G.I.
pipe (medium class) in ground complete with
G.I fitting incl. trenching(75 mm depth)and
refilling as per direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground complete
with fitting incl. trenching(75 mm depth)and
refilling as per direction of Engg.-in-Charge.
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by
2mm CRCA steel sheet duly derusted & pented
by simens gray powder cote paint is designed
695 77 as G.A drawing as per direction of Engg.-in- Set 1.00 59067.26 59,067.26
Charge. Warrentee period of replacement of
panel & accessories must be 5 years &
compelete test certificate must be submitted
along with panel board including component
In commer Main- 01 number of 125(80-125)
Amps 4P MCCB with Rom & sprader link,25 Ka
& 01 nos of 63A 4P O/L changeover switch for
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=100%Ics)with shunt trip.with
axulary for BMS
Busbar- 04 numbers of 200Amps Electrolytic
copper busbar duly sleeved by color coaded
PVC sleeve & supported by suitable size DMC
Busbar DG - 04 numbers of 60 Amps
Electrolytic copper busbar duly sleeved by
color coaded PVC sleeve & supported by
suitable size DMC insulator.
Out going- (i) 63A 4P MCB 2 NOS FOR
POWER BDB GF,1f(Legrand/Schneider make)
Out going- (ii) 02 nos 32A 4P MCB LIGHT
BDB AC IDU BDB/LIGHT
BDB,LIFT,WATER,solar,ups(Legrand/Schneider
Out going- (iii) 01 no 32A 2P MCB LIGHT
BDB AC IDU BDB/LIGHT
BDB,LIFT,WATER,solar,ups(Legrand/Schneider
Instrument- (i)3 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of digital type multifunction meter
703 85 with CT for voltage,current,frequency,PF,THD 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of Legrand -
Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved
.The Load bearing capacity of the Cable Trays
should be minimum of 104.8Kg/meter at the
span of 1.5Meter as per UL
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , FLOOR RACE WAY WITH JUNCTION
with internal dimensions of size 54mm(H) x
200mm(W), of Legrand - Cablofil make or
equievalant reputed make ISI marked as
approved .The Load bearing capacity of the
Cable Trays should be minimum of
104.8Kg/meter at the span of 1.5Meter as per
UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required.
EXTERNAL ESTIMATE OF SUBSTATION(AS PER
TATA POWER CHARGES)
Supplying & installation of 100x116 mm RS
Joist, 9 mtr long x 2 nosx23 Kg=414 Kg
Supplying & installation of Pressure Channel
Long( 9.2 K.g. per mtr.)x2 Nos
Supplying & installation of S/S DP bressing
709 91 chhanel 75 x 40 x 6mm MS channel each 2.8 K.g. 12.00 148.68 1,784.16
mtr. Long( 6.8 K.g. per mtr.)x2 Nos
Supplying & installation of AB Swith & HG
710 92 Fuse, Mounting Channel 75x40x6 -2.8 K.g. 12.00 148.68 1,784.16
mtr.long, 4 nos.(6.8K.g. per mtr.)
Supplying & installation of Cantilever chhanel
711 93 for supporting AB Switch arm, 75x40x6-1 mtr. K.g. 8.00 148.68 1,189.44
Long, 2 nos.(6.8 K.g. per mtr.)
Contilever chhanel for supporting HG Fuse 50
nos.)4.5K.g. per mtr.
Supplying & installation of Angle for
Cantilever arrrangement for AB Switch & HG
Fuse 50 x 50 x 6 -2 mtr .each 2 nos.(4.5 K.g.
Supplying & installation of S/S DP bressing
Angle 50 x 50 x 6 mm - 2.8 mtr. Long 2
nos.(4.5 K.g. per mtr.) with side angel ( Total
Supplying & installation of Angle for mounting
715 97 LT distribution Box 50 x 50 x 6 mm MS Angel - K.g. 12.00 148.68 1,784.16
2.5 mtrs.each Long 2 nos.( 4.5 K.g. per mtr.)
Supplying & installation of 11KV AB Switch 3
Pole (100 Amp.)
Supplying & installation of 11KV HG Fuse 3
Pole (100 Amp.)
Supplying & installation of 11 KV L.A. 12KV-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying & installation of+B7 H.T.stay set (
Supplying & installation of H.T. Stay Insulator
Supplying & installation of H.T. Stay clamp
(1.95 K.g./ Pair )
Supplying & installation of 7/10 SWG Stay
Supplying & installation of of materials and
installation of pipe earth electrode made out of
50mm dia class B G.I. pipe of 3.0 metre long
with arrangements for fitting/ termination of
G.I. flat / wire with G. I. nut bolts & washers
including cost of burnt wood charcoal, salt,
foreign soil, water pouring arrangements,
brick masonary enclosure on top with
removable RCC cover complete with labour for
excavation of pit in all kinds of soil & rock as
required and as per direction of Engineer-in-
724 106 Supplying & installation of No.6 GI Wire K.g. 5.00 211.22 1,056.10
Supplying & installation of 40x6mm GI Flat for
Fixing of stay set with 0.5Cum cement
concret foundation 1:3:6 size
metal with all labour and material except stay
set , stay wire , stay insulator .
Concreting of support C.C - 1:4:8 using 40mm
BHG metal size - 5'x2'x2' = 20CFT =
Padding 900x600x150mm = 0.081
Couping of support section 15''x15'' ( 3.9Cft)
height 2'-6' ( 1' - 6'' above G.L & 1' - 0' below
G.L ) in C.C 1:2:4 using 12mm BHG metal &
curing for 5 days
Supplying & installation of Materials for
Machinery work for Earth Pit,Charcoal, Salt
etc including construction of earthing chamber
(Size: 2"x2") and RCC slab cover
Supplying and Laying of HT cable on existing
3cx10 sq. mm XLPE cable.,11kv ,1 run For 25
Supplying and making out door end
termination with cast resin compound
aluminium lugs and other jointing materials
for 3cx10 sq.mm size of PVC insulated
armoured and PVC sheathed aluminium
conductor cable of 11 KV grade as required.
Supplying & installation of 25x6mm copper Z
733 115 clamp for TFR LT 4nos x0.8kg each for Kg 5.00 1465.56 7,327.80
connection of LT cable
734 116 Supplying & installation of Red Oxide paint Ltr 3.00 148.68 446.04
All. Paint for painting of pole & transformer.
Black Paint for painting of angle & channel.
Supplying & installation ,fixing of Ms Nut , Bolt
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply & Installation of Out Door type
Transformer ONAN type with Copper winding
having 25 continuous KVA rating, 11 KV / 415
Volts 3 Phase 50 Hz Vector Group DY-11,
Transformer shall operate without injurious
heating at the rated KVA at any voltage within
+/- 10% of the rated voltage of that particular
tap.Transformer shall be provided with ON
Load Tap Changer arrangement in steps of
Conservator, Silica jail breather having
connecting terminals on HV side suitable for
bare condcutor conenction, Cable End Box on
medium voltage side suitable for 1.1 KV 3.5
Core UG Cable, on Double Pole Strucutre or
Brick / CC / RCC Platforms with all fittings,
accessories, fill with flitered Transformer Oil
including testing & commissioning etc.
complete as required.
Supplying & installation of 100x116mm RS
Joist 4mtr longx23kg for resting of LT cable
Providing and fixing 25mm x 5 mm G.I strip
740 122 on surface or in recess for connections etc. as Mtr 12.00 211.22 2,534.64
Sundries for survey , PVC tape, Ampire
741 123 tape,Danger Board, small size nut & Bolt LS 1.00 3682.78 3,682.78
preparation of drawing cable socket etc
742 124 Sub-Total of Electrical Works 0 0.00 0.00 9,91,921.23
743 0 Firefighting Works 0 0.00 0.00 0.00
744 1 EXTINGUISHER SYSTEM 0 0.00 0.00 0.00
Portable Fire Extinguisher System Supplying,
installation, testing and commissioning of CO2
type Fire Extinguisher 4.5 kg capacity
confirming to IS: 2878 made from ISI marked
seamless cylinder confirming to IS: 7285,
745 2 fitted with ISI marked controlled valve Nos 3.00 12302.68 36,908.04
confirming to IS: 3224, high pressure 1mtr
discharge hose & horn complete with initial
gas charged with carrying handle & wall
mounting bracket as per direction of Engineer-
746 3 FIRE SIGNAGES SYSTEM 0 0.00 0.00 0.00
Providing and installing in position the
following type of sign boards made out of
747 4 3mm thick "Opaque" PVC foam board with 0 0.00 0.00 0.00
computer cut, PVC non-reflective self adhesive
vinyle painted foam board, complete with
mirror fasteners.
Providing and fixing the signages "Fire Exit,
Fire Exit Arrow Down,Fire Exit Arrow Left,Fire
Exit Arrow Right" of 1.5in height letters in
748 5 white with green back ground.The size of the Nos 5.00 1080.88 5,404.40
board shall be 25cm x 15 cm and shall be
fixed at the height of 2 mts
749 6 Sub-Total of Firefighting Works 0 0.00 0.00 42,312.44
Sub-Total for Construction of Day care
PHC Building at Namanagada
Construction of Day care PHC Building at
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift and
stacking the soil upto a lead of 100 metre and
753 2 including dewatering, removing slush, shoring Cum 284.96 235.53 67,115.69
and strutting (as required), complete as per
specification and as directed by the Engineer-
Filling in foundation trenches and plinth, with
excavated earth including laying the earth in
layers not exceeding 23.5 cm thick ramming &
754 3 watering with all leads & lifts including cost of Cum 190.92 130.86 24,984.17
all labour,T&P completed as directed by the
Engineer-in-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
755 4 consolidating and dressing, labours, tools, Cum 163.92 811.13 1,32,958.32
taxes etc. all complete as per the specification
and direction of Engineer-In-Charge.
Diluting and injecting chemical emulsion (to be
supplied free of cost at site of work) for PRE
CONSTRUCTIONAL Anti-termite treatment and
creating a continuous chemical barrier under
and all-round the column pits, wall trenches,
basement excavation, top perimeter of
756 5 building, expansion joints, over the top Sqm 318.15 162.84 51,807.55
surface of consolidated earth on which apron
is to be laid, surroundings of pipes and
conduits etc. complete as per specifications
(plinth area of the building at ground floor
only shall be measured for payment).
Providing and laying plain cement concrete
1:3:6 (1 cement : 3 sand : 6 stone agregate
757 6 40mm nominal size) as levelling course in Cum 26.54 6526.23 1,73,206.04
floor and plinth including tempering, curring,
shuttering etc. complete all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement: 2 sand: 4 stone aggregate
12mm nominal size) as levelling course in
758 7 foundation and plinth etc. including Cum 27.61 8474.41 2,33,978.35
tempering, curring, shuttering etc.complete all
depth and height.
First class Fly ash Brick masonry using bricks
of size 25 cm. x 12 cm. x 8 cm. having
crushing strength not less than 75 kg. Per.
Sqr. Cm. in cement mortar of mix( 1:6) with
ordinary Portland slag cement(PSC) and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in water
before use in Foundation & Plinth including
759 8 splays cutting, circular moulding, corbelling, Cum 23.39 5434.37 1,27,086.19
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-Charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not less
than 75 kg. Per Sqr. Cm. in cement mortar of
mix (1:6) with approved grade cement and
screened & washed sand for mortar after
immersing the bricks for 6 (Six) hours in water
before use in Superstructure including splays
760 9 cutting, circular moulding, corbelling, 0 0.00 0.00 0.00
chamfering and similar such type of works,
watering and curing etc. including cost,
conveyance, loading, unloading, royalties and
taxes of all materials, cost of all labour,
scaffolding, sundries, T&P required for the
works etc. complete in all respect as directed
by the Engineer-in-charge
Half brick work with Fly Ash brick masonry in
cement mortar (1:4) in super structure
having a crushing strength of not less than 75
kg./sqcm with dimensional tolerance ± 2%
including splays cutting circular moulding
chamfering and corbelling and similar such
type of works with all necessary projections
763 12 watering and curing after immersing the bricks 0 0.00 0.00 0.00
in water at least for six hours before use
including cost, conveyance, royalties and
taxes of all materials with all labour,labour
cess and T & P required for the work complete
in all respect as per direction of Engineer-in-
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-20 grade as
per approved designs and drawings having a
minimum compressive strength (in work test)
200 Kg. / Square cm. in 15 cm. cubes at 28
days after mixing and test conducted in
accordance with I.S. 516 using 12 mm. to 20
mm. size black hard crushed broken granite
stone chips and screened and washed sharp
sand for mortar of approved quality from
approved quarry, washed and cleaned (
20mm. size chips not to exceeds 25 % ) to be
mixed in concrete mixture with Portland slag
cement (PSC) including hoisting, lowering,
laying and compaction concrete by using
765 14 vibrators, watering and curing for 28 days, 0 0.00 0.00 0.00
centering and shuttering then after
dismantling and removing debris from the
work site and finishing the exposed surface
smooth providing grooves or beads wherever
necessary including cost, conveyance, loading,
unloading, royalties and taxes of all materials
and cost of all labours, sundries, T & P
required of the work etc. complete in all
respect as directed by the Engineer-in-Charge.
But excluding cost and conveyance of M.S.
rods or Tor steel and binding wires and labour
charges for straightening, cutting, bending
etc. of M.S. rods or tor steel tying the grills
and placing in proper position.
768 17 b) Column up to plinth Cum 5.85 14310.33 83,715.89
770 19 f) Column above plinth Cum 11.29 14310.33 1,61,618.18
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Cutting, straightening coiled or bent up M.S.
Rod or tor steel of SAIL/ TATA / RINL (VIZAG)
make including bending, binding, welding and
joining if necessary and tying the grills and
placing in position as required for R.C.C. Work
and for providing fan hooks as required,
hoisting, lowering, laying including cost,
conveyances, taxes of M.S. Rod or tor steel
and binding wires of 18 to 20 gauge and
780 29 labour required for the work for bending, 0 0.00 0.00 0.00
binding and tying the grills in all floors (Linear
measurement will be taken and quantity will
be calculated basing on the standard weight of
B.I.S. for M.S. Rods or tor steel only. Wastage
if any, including weight of binding wire will not
be considered for measurement) etc. complete
as per specification & direction of Engineer-in-
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:6 (1
783 32 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
16mm cement plaster to inside of brick
surfaces with cement mortar of mix 1:6 (1
786 35 cement : 6 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
6 mm cement plaster on RCC surfaces at
ceiling/slab soffit and other locations with
789 38 cement mortar of mix 1:4 (1 cement : 4 0 0.00 0.00 0.00
coarse sand) including necessary scaffolding,
curing etc. all complete at all floors and all
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm thick
cement mortar (1:4) (1 cement : 4
792 41 course sand) and filling joints with slurry 0 0.00 0.00 0.00
including cost of all materials, labour T&P etc.
required for the work all complete incl. rubbing
as per direction of the Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.10 Sqm & up to 0.4 sqm
(10mm. thick) of approved make in dadoes
laid on 12 mm thick cement mortar (1:3)
794 43 (1 cement : 3 course sand) and filling joints 0 0.00 0.00 0.00
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of the
Engineer-in-charge.
Supplying, fitting & fixing of 8-10 mm thick &
size of 600x600 mm vertified floor tile of
matt finish with veilcraft (VC/FT ) shield(
Scratch free/stain free) with water absorption
limit between 0.08% to 3% and conforming
to IS : 15622:2006 (Group B Ib). laid on 20
796 45 mm thick cement mortar (1:4) (1 cement : 4 0 0.00 0.00 0.00
course sand) and filling joints with white
cement of approved quality including cost of
all materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge (for New Work only )
Supplying, fitting & fixing of 8-10 mm thick
and size of 600x600 mm vertified wall tile of
in dadoes, skirting and risers of steps of laid
on 12 mm thick cement mortar (1:3) (1
cement : 3 course sand) jointed with slurry
798 47 mixed with pigment to match the shades of 0 0.00 0.00 0.00
the tiles etc. complete including cost of all
materials, labour T&P etc. required for the
work all complete as per direction of the
Engineer-in-charge.
Providing and fixing seasoned sal wood work
in frames at any locations including doors,
windows,cupboard, clerestory and other
800 49 frames fixing in position including cost of 0 0.00 0.00 0.00
hinges, M.S. flat (30mm x 6mm) hold fasts
lugs or dash fasteners of required dia and
length as per drawing / specification, at all
floors and all heights.
Factory made 30mm/32mm flush door shutter
(Laminates both side of frame) with all labour,
802 51 iron fittings, and wooden hinged cleats etc 0 0.00 0.00 0.00
fitted and fixed complete in all respect.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing & fixing of Factory fabricated
WINPLUS® Aluminium Door Systems - For
sliding windows, made from 6063 alloy and T-
6 tempered aluminium profile, in approved
shade of hybrid /purepolyster surface coating
(50-60micron Powder Coat), mechanically
mitred & jointed with casted / aluminium
extruded corner cleats along with Sliding
window Flush Lock, Bearing Rollers ,
Siliconised Weather strip and 5mm ET 125
toughened glassas infill shall be fitted into
Shutter using siliconised microwave treated
EPDM gaskets excluding taxes of all materials
and cost of all labours required for the work
etc. complete in all respect as desired by the
Engineer in charge. Note - conveyance, T&P
and scaffolding are not included herein.
Providing and fixing factory made 2 track 2
panel KOMMERLING uPVC white colour sliding
window comprising of uPVC multi-chambered
frame having section Frame 58mm x 49mm,
Window sash: 37mm x 61mm, made out of
lead free green profiles with corners fusion
welded, fully reinforced with Galvanized steel
1.5/2.0 mm. The windows profile should fulfill
the requirements of Viny 2010. The physical
properties of the profiles like Vicat softening
temperature, density, tensile strength,
hardness, weatherability, impact strength and
Modulus of Elasticity should be tested in
accordance with ASTM/DIN-ISO standards and
806 55 the thermal conductivity as per IS standards. 0 0.00 0.00 0.00
The window comprising of uPVC extruded
glazing beads of appropriate dimension, EPDM
gasket, G.I fasteners 100 x 8 mm size for
fixing frame to finished wall, plastic packers,
plastic caps and necessary stainless steel
screws etc. After fixing frame the gap between
frame and adjacent finished wall shall be filled
with weather proof silicon sealant over backer
rod of required size. The sash will be fitted
with 5mm clear glass ( float ).complete in all
respect as per specification and direction of
the Engineer in Charge. etc. complete
Supplying and Fixing of M.S. Grills, M.S.Doors,
M.S. Gate etc including cost,conveyance of all
809 58 materials,priming,and labour for fitting fixing 0 0.00 0.00 0.00
etc.complete as per the instruction of Engineer-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall surface
of approved make and shade including sand
papering, applying putty wherever necessary
812 61 & cost of scaffolding, staging charges with 0 0.00 0.00 0.00
cost, conveyance, taxes of all materials, cost
of all labour,labour cess T&P etc. complete as
per the direction of the Engineer-in-charge.
Painting two coats with approved anti-fungal
weather seal paints (ISI) of approved colour,
shade on wall surface over a coat of wall
primer(ISI) water bound including sand
815 64 papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete as
per specification & direction of Engineer-in-
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to receive
painting in walls, at all heights with staging
818 67 wherever necessary with cost, conveyance, 0 0.00 0.00 0.00
taxes of all materials, cost of all
labour,labourcess, all T&P etc. required for the
work complete in all respect as per the
direction of the Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside surface
of walls finished with Acrylic Wall putty (water
based) of make (Birla / JK) and finished
smooth & even surface to receive painting
using roller to the final coat including cost of
821 70 scaffolding staging charges with cost, 0 0.00 0.00 0.00
conveyances, taxes of all materials, cost of
labour, T&P required for the work etc.
complete for all floors as per specification &
direction of the Engineer-in-charge.
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
Painting two coats with approved Enamel Paint
824 73 on wood work over a coat of Wood Primer in 0 0.00 0.00 0.00
Painting two coats with approved Enamel Paint
on Steel work in Ground Floor
828 77 Terrace floor Sqm 4.01 173.22 694.63
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting and fixing of Stainless steel
of 304 grade in hand ralling using 50mm dia
of 2mm thick circular pipe with Balustrade of
size 32mm X 32mm X 2mm @ 0.90mtr. C/C
and stainless square pipe bracing of size
829 78 32mm X 32mm X 2mm in 3 rows in stair case 0 0.00 0.00 0.00
as per approved design and specification,
buffing, polishing etc with cost, conveyance,
taxes, all materials, labour, T&P etc. required
for the complete in all respect.
Earthwork in excavation in hard soil for site
leveling, foundation, pits, trenches and other
civil works upto and including 1.5metre lift and
stacking the soil upto a lead of 100 metre and
832 81 including dewatering, removing slush, shoring Cum 44.00 235.53 10,363.23
and strutting (as required), complete as per
specification and as directed by the Engineer-
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
833 82 exceeding 15cm in depth: consolidating each Cum 29.48 130.86 3,857.81
deposited layer by ramming and watering
complete (lead upto 100m) as directed by the
Engineer-In-charge.
Supplying of filling sand in foundation and
over areas including watering,ramming,
834 83 consolidating and dressing, labours, tools, Cum 22.00 811.13 17,844.90
taxes etc., all complete as per the specification
and direction of Engineer-In-charge.
Providing and laying plain cement concrete
1:4:8 (1 cement: 4 sand: 8 stone agregate
40mm nominal size) as levelling course in
835 84 foundation and plinth etc. including Cum 16.50 5897.88 97,314.95
tempering, curring ,shuttering etc.complete all
depth and height.
Providing and laying 80 mm thick factory
made cement concrete interlocking paver
block of M-35 grade made by block making
machine with storng vibratory compaction of
836 85 approved size, design & shape, laid in required Sqm 110.00 864.94 95,143.40
colour and pattern over and including 75mm
thick sand filling.as per drawing, specification
and direction of Engineer-In-charge.
Construction of cement concrete kerb with top
and bottom width 115 and 165 mm
respectively, 250 mm high in M 20 grade PCC
on M-10 grade foundation 150mm thick,
foundation having 50mm projection beyond
kerb stone, kerb stone laid with kerb laying
machine, foundation concrete laid manually,
all complete as per clause 408
Providing & Painting with synthetic enamel
paint of approved brand and manufacture to
838 87 give an even shade as per the instruction of Sqm 90.00 168.98 15,207.84
Engineer-In-Charge at all floors and all heights
including all material & labour complete.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Surface dressing of the ground including
removing Vegetation and making up
840 89 undulations and in-equalities not exceeding 15 Sqm 150.00 28.08 4,212.60
cms in depth/ height including disposal of
rubbish lead upto 50m
Supplying and stacking of good earth at site
841 90 including royalty and carriage upto 5 km lead Cum 75.00 608.41 45,630.60
Supplying and stacking sludge at site including
842 91 royalty and carriage upto 5 km lead complete. Cum 30.00 346.92 10,407.60
Uprooting weeds from the trenched area after
10 to 15 days of its flooding with water
including disposal of uprooted vegetation,
843 92 breaking clods and fine dressing the ground Sqm 45.00 5.78 260.19
including all materials and labour complete as
per direction of Engineer-In-Charge.
Providing and laying Neelgiri/Mexican grass
turf with earth 50mm to 60mm thickness of
existing ground prepared with proper level and
ramming with tools wooden (Dhurmos) and
than rolling the surface with light roller make
844 93 the surface smoothen and light waterning with Sqm 105.00 252.99 26,564.16
sprinkler and maintenance
for 30 days or more till the grass establish
properly, as per direction of officer-in-charge.
Providing & laying Selection no. 1 grass turf
with earth 50mm to 60mm thickness of
existing ground prepared with proper level and
ramming with required tools wooden and than
845 94 rolling the surface with light roller make the Sqm 45.00 103.25 4,646.25
surface smoothen and light watering the same
maintenance for 30 days or more till the grass
establish properly,as per direction of officer in
Provision of plantation all around the campus
with suitable Plants and Shurbs where
required including all material and labour
847 96 devil back bone shurbs Nos 15.00 59.00 885.00
848 97 Alpinia sanderae(10'' dia) Nos 15.00 106.20 1,593.00
849 98 Anthurium andreanum(10'' dia) Nos 15.00 106.20 1,593.00
850 99 Caladium bicolor(6'' dia) Nos 16.00 59.00 944.00
851 100 Calathea bella Nos 15.00 59.00 885.00
Provision of plantation all around the campus
with suitable tress where required including
all material and labour charge.
853 102 Araucaria bidwillii Nos 12.00 177.00 2,124.00
854 103 Cinnamomum camphora Nos 13.00 118.00 1,534.00
855 104 Cryptomeria japonica Nos 12.00 177.00 2,124.00
856 105 Cupressus sempervirens Nos 12.00 177.00 2,124.00
857 106 Filicium decipiens Nos 15.00 118.00 1,770.00
858 107 Murraya exotica Nos 15.00 118.00 1,770.00
Plantation of Trees, Shrubs, and Hedge at site
i/c watering and removal of unsaverieable
860 109 material’s as per direction of officer in charge Nos 167.00 7.55 1,261.32
(excluding cost of plant & water)
861 110 Sub-Total of Civil Works 0 0.00 0.00 75,43,185.56
862 0 Plumbing Works 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials , labour, T&P and fixing
rotational moulded polyethylene cylindrical
vertical water storage tanks conforming to
IS:12701/1996 including cutting holes through
the tank and fixing mild steel tubes and
fittings and providing extra sockets and jam
nuts, fixing ball valve etc. including hoisting
upto a height of 5 metres above ground level
and placing the tank to the required position
and providing 5.40 mtr. lengthx0.25 mtr width
KB brickwork in cement mortar (1:6) of
0.46m height in staging and 0.13mtr thick
circular protection wall of 0.46mtr height to
863 1 support the tank,12mm thick cement plaster 0 0.00 0.00 0.00
in cement mortar (1:6) over brick work, RCC
slab of size 1.60mX1.60m and 0.10m thick
,RCC beam of 0.25mx0.30m and 3.40m
average length in cement concrete (1:2:4)
using 12mm size crusher broken hard black
granite chips and required steel reinforcement
including centering and
shuttering,watering,curing ,cost of all
materials,conveyance of all materials to
worksite , payment of royalty, all taxes etc.all
complete as per approved drawing , P.H.
specification and direction of Engineer-in-
2000 liters capacity PVC water storage
supplying all materials, labour, T&P and
cutting holes through existing brick work
including making good the damages in cement
mortar (1:4) for taking G.I. Pipes and fittings/
865 3 P.V.C. pipes and fittings including watering, Each 12.00 57.35 688.18
curing, cost & conveyance of all materials to
worksite, payment of royality, taxes etc. all
complete as per direction of Engineer-in-
Supplying all materials , labour, T&P and
cutting holes in RCC floors and roofs upto
19cm thick for passing P.V.C pipes and G.I
866 4 fittings etc. , and repairing the holes after Each 6.00 193.28 1,159.70
insertion of pipe etc. with cement concrete
(1:2:4) including finishing complete so as to
make it leak-proof as per P.H. specification
and direction of Engineer-in-charge
Supplying all materials, labour, T&P and
cutting grooves in pucca floors and walls for
taking G.I./P.V.C. pipes and making good the
867 5 damages including watering , curing , cost & Mtr 35.00 221.96 7,768.53
conveyance of all materials to worksite,
payment of royality, taxes etc all complete as
per direction of the Engineer-in-charge.
Supplying all materials , labour, T&P and
cutting holes through existing brick or laterite
868 6 masonry wall for taking U-PVC pipes and Each 12.00 222.90 2,674.82
fittings including making good the damages
etc. all complete as per P.H. specification and
direction of Engineer-in-charge
Supplying all materials , labour, T&P and
cutting of RCC chajja for taking HCI or U-PVC
pipe and fittings including making good the
869 7 damages etc. all complete as per P.H. Each 10.00 137.82 1,378.24
specification and direction of Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials labour T&P filling sand
870 8 in lavatories well watered and rammed 0 0.00 0.00 0.00
including lead of materials to work site.
Supplying all materials, labour, T&P and
providing cement concrete ( 1:2:4 ) with
12mm size crusher broken hard black granite
872 10 chips including watering, curing,cost of all 0 0.00 0.00 0.00
materials, conveyance of all materials to work
site with payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge
Supplying all materials, labour, T&P and
providing and fixing ceramic tiles in floors,
treads or steps and landing on 25mm thick
bed of cement mortar (1:1) ( 1 cement : 1
sand ) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
site , payment of royalty, all taxes etc all
complete as per P.W.D specification and
direction of Engineer-in-charge ( ceramic floor
tiles of premium grade having thickness 7mm
to 8mm conforming to IS 13755 of size
30cmx30cm Kajaria/Jhonson/Orient make to
be pre-approved by the Engineer-in-charge )
Kajaria/Somany/Johnson tile
876 14 Ground floor Washrooms Sqm 16.78 1495.77 25,098.99
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:4) on
brick work including watering,curing,cost of all
877 15 materials, conveyance of all materials to 0 0.00 0.00 0.00
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Ground floor - (Qnty same as Wall Tiles in
Supplying all materials, labour, T&P and
providing and fixing porcelain glazed tiles in
dado skirting on 12mm thick cement plaster
(1:3) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles
including watering, curing,cost of all
materials, conveyance of all materials to work
879 17 site , payment of royalty, all taxes etc all 0 0.00 0.00 0.00
complete as per P.W.D specification and
direction of Engineer-in-charge( ceramic wall
tiles of premium grade having thickness
6.5mm to 6.7mm conforming to IS 13753 of
size 30cmx45cm Kajaria/Jhonson/Orient make
to be pre-approved by the Engineer-in-charge
Kajaria/Somany/Johnson tile
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and laying
in trenches (to level or slope) unplasticized
P.V.C. pipe conforming to IS 4985/2000 of the
following out side dia for class- 3 (0.60mpa )
including jointing with supply of approved
solvent cement by non-heat application
882 20 method/as per manufacture's specification, 0 0.00 0.00 0.00
provoding and laying in trench cement
concrete (1:4:8) with 40mm size hard granite
metal in the type C-1 standard bedding
surrounding or encasing including concrete for
bedding and curing etc all complete as per
P.H. specification and direction of the Engineer
Supplying all materials ,labour ,T&P and
constructing Inspection Chamber of inside
size 760mmx760mmx460mm with cement
concrete (1:3:6) using 40mm size crusher
broken hard black granite metal on bed , KB
brick work in cement mortar (1:6) in
foundation and plinth, moulding and shaping
the channel inside and benching with cement
concrete (1:2:4) using 12mm size crusher
broken hard black granite chips, 12mm thick
885 23 cement plaster (1:3) with cement punning to 0 0.00 0.00 0.00
inside, cement flush pointing (1:3) to outside,
R.C.C cover slab (1:2:4) using 12mm size
crusher broken hard black granite chips with
R.C.C man hole cover, earth work in
excavation in all kinds of soil and refilling the
cavity around the chamber including
watering,curing,cost of all materials,
conveyance of all materials to worksite,
payment of royalty,all taxes etc.all complete
as per approved drawing, P.H specification
and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia
Supplying all materials labor T&P and
constructing MH chamber of sizes earth work
in excavation in all kinds of soil CC(1:1:8) with
black granite chips size 46mm brick work with
K.B. brick having crossing strength not less
than 75 Kg /CM2 to 90 Kg/CM2s in
CM(1:6)12mm C.P(1:8) inside MH chamber
over benching with cement slush pointing
(1:3)outside the MH chamber providing
painting MS or CI step iron RCC(roof of slab
with CC(1:2:4)with black granite chips size
12mm bending binding tying the grills placing
of the reinforcement providing RCC color of
required size refilling the cavity around the MH
chamber with excavated earth including
channeling the bed of MH etc all complete as
per PH specification.
MH size 0.91m x 0.91 m with 0.45 m (18” dia
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials labour T&P and
constructing 1.40m dia x 2.00 m deep soak
way pit with dry brick having crossing strength
not less than 75Kg/CM2 to 99Kg/CM2 in
CM(1:6) for the remaining 0.4572mm height
of wall at top CC(1:3)inside and outside inside
fill with dry brick khoa size 38mm ,CM thick
889 27 RCC perforated slab to a height of 1.9012m Each 1.00 23755.05 23,755.05
from bottom covered by means of 50mmthick
RCC wall cover in pieces filled with iron plugs
including earth work in excavation refilling of
cavity around the pit and painting the iron
works complete as per PHD design and
specification including carriage of all materials
Supplying all materials ,labour ,T&P and
constructing gully trap chamber of inside size
250mmx250mm with 8cm thick RCC precast
cover slab in cement concrete (1:2:4) mix
using 12mm size crusher broken HG chips,
foundation concrete (1:4:8) using 40mm size
crusher broken HG metal on bed and around
trap, KB brick work in cement mortar (1:6) in
foundation and plinth and inside 12mm thick
cement plastering (1:3) finished with a
floating coat of neat cement including fixing
100mmx100mm size HCI gully trap,
150mmX150mm size CI grating etc.all
complete as per drawing, specification and
direction of Engineer-in-charge
891 29 1 no 30 Users Septic tank 0 0.00 0.00 0.00
Earth work in excavation of foundation in all
kinds of soil within 50m initial lead and 1.5m
initial lift including rough dressing & breaking
892 30 clods to maximum 5cm to 7cm and laying in cum 12.82 254.75 3,265.90
layers not exceeding 0.30m in depth and as
per direction of the Engineer-in-Charge.
Extra lifts of 1.50 mtr or part thereof over the
initial lift of 1.5 mtr in all kinds of
embankments and road works and ordinary
earthwork in general.
Supplying all materials, labour, T&P and
providing cement concrete (1:3:6) with 4cm
size hard granite metal including watering,
894 32 curing, conveyance of all materials to cum 0.68 6298.96 4,283.29
worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing cement concrete (1:2:4) with 12m
size hard broken granite chips including
895 33 watering, curing, conveyance of all materials cum 1.56 8225.19 12,831.30
to worksite, payment of royalty, taxes etc all
complete as per specification and direction of
the Engineer in charge
Supplying all materials, labour, T&P and
providing cement concrete (1:1½:3) with
12mm size crusher broken hard black granite
chips for RCC works including hoisting, laying,
896 34 watering, curing,cost of all materials, cum 0.61 9358.46 5,708.66
conveyance of all materials to worksite,
payment of royalty,all taxes etc. all complete
as per PWD specification and direction of the
Engineer in charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing steel reinforcement of Fe-415 /Fe-
500 grade for RCC work including
cutting,bending,binding and tying the grills
897 35 and placing in position including cost of Qntl 0.49 10438.63 5,114.93
binding wire 18 to 20 gauge,cost of steel,
conveyance of all materials to worksite,
payment of royalty,all taxes etc all complete
as per PWD specification and direction of the
Engineer-in-charge.
Supplying all materials, labour, T&P and
providing rigid & smooth centering and
shuttering for RCC works including false work
898 36 and dismantling them after casting including 0 0.00 0.00 0.00
conveyance of all materials to worksite,
payment of royalty, taxes etc. all complete as
per specification and direction of the Engineer-
RCC floor, roof slab chhaja up to 4.430 m
Supplying all materials.labour.T&P and
providing brick work in foundation and plinth
with KB bricks having curshing strength not
less than 75 kg/sqcm with dimensional
tolerance+ 8% in cement mortar ( 1:3 )
900 38 including watering,curing,cost of all cum 5.76 6113.11 35,211.50
materials,conveyance of all materials to
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer in charge.
Supplying all materials,labour,T&P and
providing 12mm thick cement plaster(1:3) on
brick work including watering,curing,cost of all
901 39 materials, conveyance of all materials to sqm 39.30 222.31 8,736.86
worksite,payment of royalty,all taxes etc.all
complete as per PWD specification and
direction of the Engineer-in-charge.
Supplying all materials, labour, T&P and
providing cement punning including watering,
curing, conveyance of all materials to
902 40 worksite, payment of royalty, taxes etc all sqm 16.17 42.48 686.90
complete as per specification and direction of
the Engineer in charge
Supplying all materials labour T&P and fitting
and fixing 12mm dia MS/CI step iron including
903 41 supply of necessary CC(1:2:4) for fixing etc. Each 5.00 314.12 1,570.58
complete as per PH specification.
Supplying all materials, labour T&P for
providing fitting & fixing 100mm x 100mm SW
Tee in wall including filling the recess with
cement concrete (1:2:4) with 12mm size HG
904 42 chips all complete including watering curing Each 2.00 461.50 923.00
conveyance of all materials to work site
payment of royalty all complete as per
specification and direction of Engineer in
Supplying all materials labor T&P filling sand in
foundation and plinth with well watered and
rammed etc all complete as per direction of
Engineer-in-charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
PVC pipes conforming to ASTM-D-1785/89 of
906 44 the following nominal bore, tube fittings and 0 0.00 0.00 0.00
clamps including making the wall good. ceiling
and floor, testing all complete as per
specification and direction of the Engineer in
charge.(Oriplast/Supreme/Finolex)
907 45 20mm dia PVC ASTM pipe (sch-80) Mtrs. 30.00 161.66 4,849.80
908 46 25mm dia PVC ASTM pipe (sch-80) Mtrs. 60.00 221.96 13,317.48
909 47 32mm dia PVC ASTM pipe (sch-80) Mtrs. 50.00 291.70 14,584.80
910 48 40mm dia PVC ASTM pipe (sch-80) Mtrs. 40.00 383.50 15,340.00
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes conforming to
IS:15778, having thermal stability for hot &
cold water supply, including all CPVC plain &
911 49 brass threaded fittings including fixing the pipe 0 0.00 0.00 0.00
with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC
solvent cement and testing of joints complete
as per direction of Engineer-in-Charge
Supplying all materials, labour T&P and fitting
and fixing brass/CP fittings of the following
nominal bore with supply of all joiniting
913 51 materials including cost & conveyance of all 0 0.00 0.00 0.00
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Con-CHR-
053KN Jaquar make)
15mm dia CP two in one bib cock (Con-CHR-
041KN Jaquar make)
15mm dia CP Bib cock (Con-CHR-047KN
15mm dia CP Long Body Bib cock (Con-CHR-
107KN Jaquar make)
15 mm dia CP Bib cock Elbow Action (Plaza
20mm dia CP concealed stop cock(Plaza Make)
25mm dia brass full way valve (Shakti make)
32mm dia brass full way valve (Shakti make)
40mm dia brass full way valve (Shakti make)
15mm dia CP Health faucet (Con-ALD-MCH-
573 Jaquar make)
924 62 15mm CP Extension piece Each 33.00 69.97 2,309.14
926 64 15mm size C.P. flange Each 33.00 47.55 1,569.28
Supplying all materials, labour, T&P and fitting
and fixing U-PVC SWR soil waste ventilating
pipes and fittings of the following outside
diameter conforming to ISI No 13592/1992 to
walls with nails, bobbins and wooden plugs or
laying in trenches including jointing with
927 65 supply of approved rubber lubricant by non- 0 0.00 0.00 0.00
heat application method/as per manufacturer's
specification, testing, earthwork in excavation
in all kinds of soil and refilling of trenches ,
cost & conveyance of all materials to worksite,
payment of taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
110mm U-PVC SWR Pipe (Supreme/Ashirvad)
110mm U-PVC ‘P’ Trap(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC door bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain bend(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Plain tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Door tee(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC offset without ear(Ori
Plast/Finolex/Supreme Make)
100mm U-PVC Cowl(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC S/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC D/Jn door(Ori
Plast/Finolex/Supreme Make)
110mm U-PVC Socket(Ori
Plast/Finolex/Supreme Make)
Supplying all materials, labour, T&P and fixing
vitreous china water closet, squatting pan
(Indian type W.C pan/Orissa pattern squatting
pan) duly embedded in cement concrete
(1:5:10) using 4cm size hard granite metal
including fixing a pair of vitreous china
250mm x 130mm x30mm footrest, fixing
100mm dia HCI 'p' or 's' trap (with/without
50mm dia horn) for water colset squatting pan
including jointing the trap with pan in cement
mortar (1:1) cutting the floor and mending
good the damages , cost & conveyance of all
materials to worksite, payment of royality ,
taxes etc. all complete as per P.H
specification and direction of the Engineer-in-
580mm size Orissa pan
(Hindware/Parryware/Neycer make)
Supplying all materials, labour, T&P and fixing
the following vitreous china Wash Down Water
Closet(European type W.C. pan)with integral
'p' or 's' trap to the floor with wooden plug and
chromium plated pedestal screws including
941 79 jointing the trap with soil pipe in cement 0 0.00 0.00 0.00
mortar (1:1) fixing plastic seat and cover for
wash down water closet with chromium plated
brass hinges and rubber buffers including
polishing , cost & conveyance of all materials
to worksite, payment of royality, taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
European water closet with 's' trap
plain(Hindware/Parryware/Neycer make)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour T&P and and
fixing 12.50 liters/10 liters capacity low level
flushing cistern with a pair of cast iron or M.S.
brackets complete with fittings such as
siphonic arrangements 15mm nominal size
brass/pvc ball valve with polythene float CP
brass handle,unions and couplings for
connection with inlet, outlet and overflow
pipes, 32mm dia CP long flush bend, 15mm
dia pvc inlet connection pipe including cutting
holes and making good the same and
connecting the flush bend with cistern and
closet and connceting the inlet pipe with
suupply main , cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as per P.H specification and
direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm.
944 82 Dia CP long flush bend ( Slimline-white- Each 5.00 1853.07 9,265.36
Parryware make )
Supplying all materials, labour T&P and fixing
wash basins with hole for pillar taps with cast
iron or M.S.brackets painted white including
cutting holes in walls and making good the
damages with supply of wooden plugs, screws
and cement etc, fixing pedestal for wash basin
recessed at the back for the reception of pipes
and fittings, fixing PVC waste pipe of 32mm
nominal diameter for wash basin including
945 83 brass check nut complete, fixing pillar taps 0 0.00 0.00 0.00
capstan head screw down high pressure
lettered 'Hot' and 'Cold' with long screws,
shanks and back nuts of 15mm dia nominal
bore, fixing 15mm dia PVC inlet connection
pipe and making connection with pillar cocks
and supply mains for wash basin, fixing 32mm
dia CP brass waste, cost & conveyance of all
materials to worksite, payment of taxes etc.
all complete as perP.H specification and
direction of the Engineer-in-charge
550mmx400mm W.H.basin
(Hindware/Parryware/Neycer make)with
946 84 15mm dia C.P.pillar cock (Jaquar make) with Each 6.00 6245.27 37,471.61
Supplying all materials, labour, T&P for fitting
& fixing Kitchen sink of all standard sizes with
947 85 a pair of bracket, C.P. waste, trap & P.V.C. Each 3.00 5843.48 17,530.43
waste pipe & painting brackets including
supply of cement concrete & mortar etc. all
complete. 24” x 18” x 10” sink
Supplying all materials, labour, T&P and fixing
standard sized CP towel rail complete with CP
948 86 brass brackets fixed to wooden plugs with CP 0 0.00 0.00 0.00
screws as per specification and direction of the
Engineer in charge
949 87 25mmx600mm long CP towel rail Each 5.00 827.65 4,138.26
Supplying all materials, labour, T&P and fixing
standard sized glass-shelf with CP brass
brackets and guard rail complete fixed to
951 89 wooden plugs with CP screws as per 0 0.00 0.00 0.00
specification and direction of Engineer in
952 90 600mmx125mm plate glass shelf Each 6.00 711.89 4,271.36
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing
mirror of superior glass mounted on
953 91 6mm.thick A.C. sheet or ply wood sheet and 0 0.00 0.00 0.00
fixed to wooden plugs with CP screws and
washers complete as per specification and
direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled
Supplying all materials, labour, T&P and fixing
CP soap holder complete with CP brass
955 93 brackets fixed to wooden plugs with CP screws 0 0.00 0.00 0.00
as per specification and direction of the
Engineer in charge
956 94 CP soap holder Each 8.00 212.05 1,696.37
Supplying all materials labor T&P & Fitting &
fixing CP shower with rim with supply of red
957 95 lead and yarn nail complete as per direction of 0 0.00 0.00 0.00
Engineer in charge.
Providing fitting, fixing of Aluminium door with
anodized AL. door section of 9202 as vertical
member,9201 as top and 9200 as middle
bottom member with frame section No. 9221
959 97 and tapered clip no. 4660 and the frame to be Sqm 9.45 6065.64 57,320.27
completed by means of jointing angle No.
1855 Including all Cost of Labour. T&P hire
charges of drilling machine. labour charges
etc. complete. 53 x 1.625
Fitting & fixing of Aquagurad Cooler Cum
960 98 Purifier for drinking water privision. 0 0.00 0.00 0.00
961 99 Cost of Aquaguard Cooler - Cum Purifier Each 1.00 57230.00 57,230.00
Construction of 1nos production wells
including scientific source finding
through consolidated and unconsolidated
962 100 rock with down the hammer drilling rig 0 0.00 0.00 0.00
or combination rig with PVC pipe and
installation of submersible pump set with
Labour for drilling a perfectly vertical bore hole
of specified dia for a specified depth below
ground level through consolidated and
unconsolidated rock with down the hole
hammer drilling rig or combination rig as
required to suit the site condition as per the
direction of the Engineer in charge including
use of own rig with its accessories, tools and
plant and consumables etc for lowering of
200mm/150mm dia G.I/P.V.C/M.S casing
pipes for housing fitted with socket and with or
without well screen as per the necessity for
soft, medium, hard and boulder formation
(G.I/ P.V.C/ M.S casing pipes if required to
prevent collapse of overburden is to be
provided by the contractor including lowering
and withdrawing after completion of the tube
well), 200mm dia to 400mm dia in overburden
portion including packing of gravel supplied by
the contractor for 400mm dia bore only
964 102 Drilling of 200mm dia bore 0 0.00 0.00 0.00
967 105 Drilling of 150mm dia bore 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Lowering the following size of G.I/P.V.C/M.S
housing pipes with or without slotted pipes as
per the necessity from ground level up to
45.00m depth and fitted and fixed up in
perfectly vertical position including cutting and
969 107 threading of pipes and slotted pipes and 0 0.00 0.00 0.00
supplying and fixing all jointing materials,
tools and plant etc all complete and keeping
the top of casing pipe threaded including
plugging tube wells to prevent entry of foreign
970 108 Lowering of 200mm dia P.V.C casing pipes 0 0.00 0.00 0.00
Supplying polyvinyl chloride pipes as per ASTM-
D-1785-89 having threads in accordance with
DIN 2999 part-1/DIN-42225 part-II
specification length of pipe (laying length) will
be 3 mtrs. The pipes shall be supplied with
both external and threaded with free socket.
The pipe having external thread at one end i.e
female and or belled end. The female end
having internal thread is to be belled in order
to accept the male end while jointing pipes
with a bore threading shall be provided with a
greave at the roof of the male thread
accomodate flexible PVC/Rubber 'O' ring to
make the joint water tight colour of the pipe
shall be blue. The name of the manufacture
along with batch No class of pipe shall be
stranded legibly of each pipe length.
Supplying all materials, labour, T&P and
providing and providing sanitary sealing by
cement concrete grouting of annular space
around GI/PVC/MS housing pipe upto 5m
below ground level (as per drawing) to plug
the bore hole excluding cost of cement all
975 113 complete as per direction of the Engineer in Each 1.00 931.96 931.96
charge. Minimum one metre of casing pipe to
be inserted in the bore into the rock at the
bottom to ensure sanitary sealing (excluding
cost of cement which will be supplied directly
by the department)
Cleaning and developing the tube well with
supply of compressor worked till clear and
976 114 adequate discharge is obtained from the tube 0 0.00 0.00 0.00
well including supply and use of all necessary
equipment and labour as per direction of the
Engineer in charge
Supplying all materials, equipment, labour &
conducting reconnaissance survey, integrated
Hydrological and Geophysical (Electrical
Resistivity Method) survey & selection of
978 116 potential source for exploration of Ground 0 0.00 0.00 0.00
Water including selection and recommendation
of site for drilling wells in selected locations in
any part of Orissa under the following
Geological formation:
Rocky terrain with boulder formation for 300m depth
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and
providing, fitting and fixing submersible pump
with squirrel cage induction type submersible
type submersible electric motor to run on 3
phase/1 phase line voltage ranging from 320
volt to 450 volt conforming to IS: 8034/89
with following specifications with suitable
control panel, jointing with GI/PVC/HDPE
pipes, electrification, testing, commissioning,
trial running, conveyance of all materials to
worksite, payment of taxes etc all complete as
per specification and direction of the Engineer
in charge (Texmo/Crompton Greaves/Kirloskar
1 H.P. Single phase/ three phase 3 stage
head renge of 20 to 35 mtr with discharge
981 119 capasity 145 to 110 L.P.M With outlet dia 25 Each 1.00 19749.90 19,749.90
mm (keeping 100% standby)
982 120 DOL Control panel Each 1.00 4490.49 4,490.49
983 121 40mm dia steel short piece Each 1.00 179.71 179.71
985 123 50mm size CI bracket Pair 1.00 107.73 107.73
987 125 20mm dia rigid UPVC pipes Mtr 30.00 8.14 244.26
988 126 Steel rope with cover Mtr 30.00 31.51 945.18
989 127 Labour charges for lowering including transportation
Supplying all materials, labour, T&P and
providing and fixing to wall or ceiling and floor
HDPE pipes and pipe fittings conforming to IS:
4984/2000 (10kgf/sqcm) of the following
990 128 nominal bore with clamps and jointing by 0 0.00 0.00 0.00
Fusion welding method including testing,
making good the wall, ceiling and floor all
complete as per specification and direction of
the Engineer in charge
991 129 32mm HDPE pipes (Finolex/Supreme make) mtr 91.20 117.76 10,739.61
992 130 Sub-Total of Plumbing Works 0 0.00 0.00 12,98,000.73
993 0 Electrical Works 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Point wiring in Recessed wirring to light point/
fan point/ exhaust fan point/ call bell point
with 1.5 sq.mm FRLSH/LSZH PVC insulated
copper conductor of ISI marked
Finolex/Anchor/Polycab/HAVELLS or
equievalant reputed make A catagory ISI
marked as approved as approved 20 mm dia
PVC flexible non metallic conduit FRLS type
ISI marked Make-AKG/Anchor/Kinjal or
equievalant reputed make A catagory ISI
marked as approved with 6A modular type((
falme retradant type)) switch ISI marked
Make-Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
994 1 make & model A catagory ISI marked as 0 0.00 0.00 0.00
approved, and ceiling rose ISI marked
Make-Schneider(Zencelo)/legrand( myrius)
/Panasonic (Equievalant model) or equievalant
reputed make & model A catagory ISI marked
as approved of modular type G.I box with
metallic cover plate (both side) falme
retradant type) Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved, of suitable size, modular box with
1.5 sq. Mm FRLS PVC insulated single core
multistandard copper conductor as earth wire
including all accessories and connection as per
direction of Engineer -in -Charge. CATAGORY
Group control of point in Recessed wirring to
light point/ fan point/ exhaust fan point/ call
bell point with 1.5 sq.mm FRLSH/LSZH PVC
insulated copper conductor of ISI marked
Finolex/Anchor/Polycab/HAVELLS or
equievalant reputed make A catagory ISI
marked as approved as approved 20 mm dia
PVC flexible non metallic conduit FRLS type
ISI marked Make-AKG/Anchor/Kinjal or
equievalant reputed make A catagory ISI
marked as approved with 6A modular type((
falme retradant type)) switch ISI marked
Make-Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
998 5 make & model A catagory ISI marked as Nos 12.00 1200.06 14,400.72
approved, and ceiling rose ISI marked
Make-Schneider(Zencelo)/legrand( myrius)
/Panasonic (Equievalant model) or equievalant
reputed make & model A catagory ISI marked
as approved of modular type G.I box with
metallic cover plate (both side) falme
retradant type) Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved, of suitable size, modular box with
1.5 sq. Mm FRLS PVC insulated single core
multistandard copper conductor as earth wire
including all accessories and connection as per
direction of Engineer -in -Charge. CATAGORY
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying ,fixing of 6A Plug on the same
board in existing switch board with complete
fitting by 01 no of 6A switch & socket
(modular type)( ( falme retradant type)) &
other required accessories of ISI marked as
approved as per direction of Engg. -in -
Charge. Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
reputed make & model A catagory ISI marked
as approved, complete suitable for for
HOSTEL.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( ( falme
retradant type)) with suitable size modular
box & cover( falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge..Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision) or equievalant
1000 7 make & model ISI marked as approved , Nos 14.00 597.08 8,359.12
complete suitable for Residence.(Maximum 02
nos point in one circuit).All the switches &
sockets should be warrantied for a period of
10 years against manufacturing defects
against which ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying,fixing of 1x16A Plug on the
separate board with complete fitting by 01 no
of 16A switch & socket(modular type)( falme
retradant type)) with suitable size modular
box & cover( falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of engg-
in-charge.. Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision)or equievalant
reputed make A catagory ISI marked as
approved, (For equipement power)All the
switches & sockets should be warrantied for a
replacement period of 10 years against
defects with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Receass wiring for circuit/submain wiring with
the following mentioned size PVC FRLSH/LSZH
insulated, copper conductor, single core cable
(Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE)
or equievalant reputed make A catagory ISI
marked as approved, in recessed PVC conduit
Heavy duty FRLS of mentioned size
(AKG/Anchor/Kinjal or equievalant ISI
marked as approved) as required as per
direction of Engg.-in-Charge. Ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free after sales service within warranty
period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
1003 10 sq. mm copper wire for earth continuty Mtr 100.00 153.40 15,340.00
conductor. In 20 mm dia non metallic heavy
duty flexible conduit (LDB to LSB/LIGHT
2 nos single core 2.5 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
1004 11 conductor in 20 mm dia non metallic heavy Mtr 211.00 169.92 35,853.12
duty flexible conduit.(BDB to LSB/LIGHT
CKT/5A PLUG/INVERTER POINT TO EACH
4 nos single core 2.5 sq. mm copper wire for
phase and neutral and 02 nos of single core
1005 12 2.5 sq. mm copper wire for earth continuty Mtr 155.00 307.98 47,736.90
conductor .in 25 mm dia non metallic heavy
duty flexible conduit(LDB to LSB/5A SOCKET)
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core 1.5
sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
duty flexible conduit .(PDB to PSB/ GAYSER
POINT/AC POINT/ROOM LIGHT CONTROL TO
CORRIDOOR POINT/DG PANEL ESSENTIAL
LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
1007 14 conductor in 32 mm dia non metallic heavy Mtr 25.00 287.92 7,198.00
duty flexible conduit.(PDB to PSB/GAYSER.
POINT/AC POINT/DG PANEL ACCL TO EACH
QTR ESSENTIAL LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core 2.5
1008 15 sq. mm copper wire for earth continuty Mtr 16.00 226.56 3,624.96
conductor in 25 mm dia non metallic heavy
duty flexible conduit .(LFDB TO LBDB)
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic heavy
duty flexible conduit.(LFDB TO LBDB/power
unit/point) (4X6+2X2.5)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core 4
sq. mm copper wire for earth continuty
conductorin 32 mm dia non metallic heavy
duty flexible conduit .(LFDB TO FLOOR PANEL
TO TPN BDB light ) (4X10+2X4)
Supplying and fixing 20 amps, 240 volts, SPN,
industrial type socket outlet, with 2 pole and
earth metal enclosed plug top along with 32
amps. C-series, SP MCB, in sheet steel
enclosure, on surface or in recess, with
chained metal cover for the socket outlet, and
complete with connections, testing and
commissioning etc. as required as per
direction of Engg.-in-Charge.. . Make-
Legrand/Schneider/Siemens/panasonic or
equievalant reputed make & model A catagory
ISI marked as approved,All the Components
should be warrantied for a replacement period
of 5 years against defects with ncessary test
report & Warrnaty certificate to be submitted
to the department for genuinity of product &
to avail free aftersales service within warranty
period for acceptance of materials.
Supplying and fixing following size/ modules,
GI box along with modular base & metallic
cover plate (both side) plate for modular
switches in recess etc as required as per
direction of Engg.-in-Charge. MAKE-
Legrand/Siemens/Anchor/Panasonic/
Schneider or equievalant reputed make &
1012 19 model A catagory ISI marked as approved .All 0 0.00 0.00 0.00
the Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI marked
along with accessories in surface/recess
including cutting the wall and making good the
same in case of recessed conduit as required
as per direction of Engg.-in-Charge .MAKE
KINJAL/ AKG/Anchor or equievalant reputed
make A catagory ISI marked as approved
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supply and fixing modular type indicator on
the existing switch box/cover . Equievalant
higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved as required
as per direction of Engg.-in-Charge.All the
Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying and installation of AC starter
Modular type, Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved coil voltage-
415 Volt A.C. & O/L range of 9-14A range on
mod Box of suitable size including modular
1020 27 coveras required as per direction of Engg.-in- Nos 5.00 724.52 3,622.60
Charge .All the Components should be
warrantied for a replacement period of 5 years
against defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
Supply and fixing CALL bell (Ding dong type)
/Buzzer on the existing switch box/cover.
Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasonic
make or equievalant reputed make & model A
catagory ISI marked as approved .as required
as per direction of Engg.-in-Charge.All the
Components should be warrantied for a
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
S/F of Bakelite angle holder/batten holder
(make-Anchor/Havells/Panasonic or
equievalant reputed make A catagory ISI
marked as approved )of ISI marked
conforming to IS-1258/1987 in place of ceiling
rose as per direction of Engg.-in-Charge .All
1022 29 the Components should be warrantied for a each 12.00 70.80 849.60
replacement period of 5 years against defects
with ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of Blanking plate(modular
type)( falme retradant type)) in existing
switch box(anti bactorial & falme retradant
type) including supplying of all required
accessories of ISI marked as approved as per
direction of engg-in-charge..Make-
Schneider(Zencelo)/legrand( Arteor)
1023 30 /Panasonic (vision), complete suitable for IPH Nos 12.00 49.56 594.72
standard hospital.It should be warrantied for
a period of 10 years against manufacturing
defects against which ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to avail
free aftersales service within warranty period
for acceptance of materials.
1024 31 Sub-Head II (Light fitting Fixture & Fan) 0 0.00 0.00 0.00
Supplying, installation, of exhaust fan of
heavy duty 300 mm sweep (Make-
Equievalant higher model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha/Hal
onix or equievalant reputed make & model A
catagory ISI marked as approved ) of
exhaust fan in the existing wall, including
fixing & conntection as required as per
direction of Engg.-in-Charge. Replacement
Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1400 mm sweep white/milky
colour ceiling fan Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha/Hal
onix or equievalant reputed make & model A
1026 33 catagory ISI marked as approved ) including Nos 8.00 2374.16 18,993.28
wiring the down rod of standard length (upto
30 cm) with 1.5 sq mm PVC insulated, copper
conductor, single core cable etc. as
required.(With fan Regulator) as required as
per direction of Engg.-in-Charge.Replacement
Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1200 mm sweep white/milky
colour ceiling fan Make-Equievalant higher
model with 5 star rated of
Havells/almonard/Anchor/Panasonic/Usha
/Halonix or equievalant reputed make & model
1027 34 A catagory ISI marked as approved ) Nos 15.00 2361.18 35,417.70
including wiring the down rod of standard
length (upto 30 cm) with 1.5 sq mm PVC
insulated, copper conductor, single core cable
etc. as required as per direction of Engg.-in-
Charge,Replacement Warranty will be 5
years.. .(With fan Regulator)
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
surface mounted square shape 18 W LED
luminaire of dimension of 225x 225 x 35 mm
consists of white powder coated , die-cast
Alluminium housing with high quality frosted
diffuser for glare-free uniform lighting
distribution with wattage not more than 20
watt and lumen output of 1500 lumens, , CRI
not less than 80,CCT of 6000 degree K,THD
less than 10%, with electronic driver, internal
surge protection of 2.5 KV , L70 B50: 30000
hrs (2 yrs warranty) and all other accessories
suitable for operation on 220 V to 240 V
supply as required as per direction of Engg.-in-
Charge. ( Make : (Make: wipro LD80-171-60-
XX-SM or similar model of LT/Trilux
/Philips/Panasonic/HALONIX or equievalant
reputed make & model A catagory ISI marked
as approved).The luminaire should be
Replacement Warranty will be 5 years
SITC of energy efficient LED tube light fittings
with decorative alluminium batten and LED
tube light having power rating not more than
20 watt and lumen output not less than 2200
lumen complete with electronic driver and all
other accessories with diffuser having 5 years
warranty i/c connection etc as required as
per direction of Engg.-in-Charge. ( (Make:
wipro LL20-221 --or similar model of
LT/Trilux /Philips/Panasonic/HALONIX or
equievalantreputed make & model A catagory
ISI marked as approved.). The luminaire
should be Replacement Warranty will be 5
SITC of Sleek LED 10-12 watt mirror light
fitting with extruded polycarbonate
housing,High optically efficient diffuser,above
wash basin complete with all accessoriesetc.
directly on wall, including connection with 1.5
sq. mm FRLS PVC insulated, copper conductor,
single core cable and earthing etc. as required
as per direction of Engg.-in-Charge.
( Make : WIPRO Model No:LL20-111-XXX-60-
NE or similar model of
PHILIPS/Panasonic/HALONIX or equievalant
reputed make & model A catagory ISI marked
as approved. )The luminaire should be
Replacement Warranty will be 5 years
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy efficient
recess mounted LED luminaire with white
powder coated ,pressure die-cast Al housing
,with high transmititivity,non-yellowing PMMA
diffuser, with wattage not more than 20 watt
and lumen output not less than 2600 Lumen (
120 lumens/watt ) of size240 x240 x 40 mm ,
,CRI not less than 80,CCT of 5700-6500
degree K,THD less than 10%, with Non
integrated isolated driver (protects the output
/secondary side from any disturbance on the
1031 38 input / primary side ensuring safe operation), Nos 21.00 2357.64 49,510.44
all other accessories , life : 50,000 burning
hours (5 years warranty) , Internal surge
protection of 3 KV suitable for operation on
230 V, 50 Hz supply as required as per
direction of Engg.-in-Charge. (Make: wipro
LDB1-171-XXX-60-SM or similar model of
LT/Trilux /Philips/Panasonic/HALONIX or
equievalant reputed make & model A catagory
ISI marked as approved.) The luminaire
should be Replacement Warranty will be 5
Supplying, installation, testing and
commssioning of 400 mm sweep wall fan
Make-Equievalant higher model with 3 star
Havells/almonard/Anchor/Panasonic/Usha/Hal
1032 39 onix or equievalant reputed make & model A Nos 2.00 2542.90 5,085.80
catagory ISI marked as approved ) including
wiring with 1.5 sq mm PVC insulated, copper
conductor, single core cable etc. as required
as required as per direction of Engg.-in-
Charge.Replacement Warranty will be 5 years.
Supplying and fixing extra conduit down rod of
20 cm length G.I. pipe 15 mm dia, heavy
gauge including painting etc. as requiredas
1033 40 required as per direction of Engg.-in-Charge . Nos 25.00 37.76 944.00
(Note : More than 5 cm length shall be
rounded to the nearest 10 cm and 5 cm or less
shall be ignored)of ISI mark as approved.
1034 41 BDBS,DB,AC DB,FLOOR PANELS,MCBS 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of following mentioned
way, three pole/single pole and neutral, sheet
steel,double door MCB distribution board, 415
volts/240 volts shall be as per IEC 61439-
3,integrated door earthing system offering
additional safety to the user,High quality
polyurethane Gasket,the box and cover shall
be fabricated to withstand IK09,the DB should
be properly pre-treated with 7 tank process
and duly powder coated, phosphatized with
powder coated finish, on surface/recess,
complete with terminal blocks,with suitable
size FR PVC insulated copper conducter up to
terminal blocks, tinned copper busbar, neutral
busbar, earth bar, din bar. Make-LEGRAND-
Ekinox3 DB/ Siemens-Betaguard/ Schneider-
Acti 9/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
as approved. as per direction of Engg.-in-
Charge. The Distribution boards should be
Replacement Warranty will be 5 years
4 Way(8+12) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting with
100A Copper Bus Bar for each phase, with
1036 43 neutral Bus bar, Earth Bar & Cable ties for Nos 2.00 2553.52 5,107.04
cable management, prefitted masking sheet,
IP43-IK09 with metal door(FOR LIGHT,POWER
INDOOR,3-PH,POWER LOAD) Warranty on DB
Supply and fixing of 12 way DD single pole
and neutral sheet steel MCB distribution board
250V on surface/recess complete with tinned
copper bus bar, neutral bus bar, earth bar, din
bar, detachable gland plate, interconnections,
phosphatized and powder painted including
earthing etc. as required (but with out MCB/
RCCB/ Isolator) (ALL LIGHT WITH
CORRIDOOR/COMMON AREA,EM LIGHT,UPS
LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
door)(only each EM. CONNECTION UPS LOAD)
Supplying and fixing 20 amps rating, 240
volts, C series, Double poles MCB of Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
1039 46 as approved in the existing MCB DB complete Nos 1.00 395.30 395.30
with connections as per direction of Engg.-in-
Charge. The MCB should be Replacement
Warranty will be 5 years .MCB should have the
fault indication system in different colour for
ON, OFF & TRIP condition or Mid trip position
for Trip conditions for easier identification of
fault.Warranty on MCB is 5 years.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 6 amps to 32 amps
rating, 240 volts, C series, single poles MCB of
Make-LEGRAND-Ekinox3 DB/ Siemens-
Betaguard/ Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI marked
1040 47 as approved. the existing MCB DB complete Nos 36.00 155.76 5,607.36
with connections as per direction of Engg.-in-
Charge. The MCB should be Replacement
Warranty will be 5 years.MCB should have the
fault indication system in different colour for
ON, OFF & TRIP condition or Mid trip position
for Trip conditions for easier identification of
fault.Warranty on MCB is 5 years.
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABBor equievalant reputed
1041 48 make & model A catagory ISI marked as Nos 2.00 1990.66 3,981.32
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
1042 49 make & model A catagory ISI marked as Nos 1.00 2270.32 2,270.32
approved in the existing MCB DB in the
existing MCB DB complete with connections as
per direction of Engg.-in-Charge. The RCCB
should be Replacement Warranty will be 5
Supplying and fixing 63Amps TPN 415 volts,
RCCB,300mA Make-Equievalant higher model
of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
1043 50 approved in the existing MCB DB in the Nos 2.00 3114.02 6,228.04
existing MCB DB complete with connections as
per direction of Engg.-in-Charge.(for power
BDB & AC ODU, 8 way TPN BDB IC).The RCCB
should be Replacement Warranty will be 5
1044 51 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C of materials and installation of pipe
earth electrode made out of 50mm dia class B
G.I. pipe of 3.0 metre long with arrangements
for fitting/ termination of G.I. flat / wire with
G. I. nut bolts & washers including cost of
burnt wood charcoal, salt, foreign soil, water
1045 52 pouring arrangements, brick masonary Nos 3.00 3701.66 11,104.98
enclosure on top with removable RCC cover
complete with labour for excavation of pit in
all kinds of soil & rock as required and as per
direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Providing and fixing 4 mm dia copper wire on
1046 53 surface or in recess for loop earthing as Mtr 33.00 112.10 3,699.30
required.as per direction of Engg.-in-Charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
CABLING AND END TERMINATION MAIN
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
1049 56 following size cables as per direction of Engg.- 0 0.00 0.00 0.00
in-Charge. Ncessary test report & Warrnaty
certificate to be submitted to the department
for genuinity of product & to avail free after
sales service within warranty period for
acceptance of materials
4core x 16 sq mm (MDB TO FDBL/FDBU
4 core x 4 sq mm (for small power/LIGHT TO
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in the
1054 61 trench in one horizental formation including Mtr 20.00 151.04 3,020.80
excavation ,sand coushing protection covering
and refilling the trench etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
1055 62 exceeding 25 SQ. MM direct in ground in the Mtr 30.00 48.38 1,451.40
EXISTING PIPE etc as required as per direction
of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
1056 63 25 SQ. MM but not exceeding 400 SQ. MM Mtr 22.00 66.08 1,453.76
direct in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM in open duct etc as
required as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
1058 65 25 SQ. MM in open duct 400 SQ. MM direct in Mtr 8.00 53.10 424.80
ground in the EXISTING PIPE etc as required
as per direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
1059 66 exceeding 25 SQ. MM in surface with shaddle Mtr 3.00 94.40 283.20
and screw etc as required as per direction of
Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
1060 67 exceeding 120 SQ. MM From 25 SQ. MM in Mtr 2.00 149.86 299.72
surface with shaddle and screw etc as required
as per direction of Engg.-in -charge.
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
1061 68 exceeding 400 SQ. MM From 120 SQ. MM in Mtr 2.00 152.22 304.44
surface with shaddle and screw etc as required
as per direction of Engg.-in -charge.
Supplying and making end termination with
brass compression gland and aluminium lugs
for following mentioned size cable.as per
direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia G.I.
pipe (medium class) in ground complete with
G.I fitting incl. trenching(75 mm depth)and
refilling as per direction of Engg.-in-Charge.
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground complete
with fitting incl. trenching(75 mm depth)and
refilling as per direction of Engg.-in-Charge.
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel (for
both light and power circuit) made out by
2mm CRCA steel sheet duly derusted & pented
by simens gray powder cote paint is designed
1070 77 as G.A drawing as per direction of Engg.-in- Set 1.00 59067.26 59,067.26
Charge. Warrentee period of replacement of
panel & accessories must be 5 years &
compelete test certificate must be submitted
along with panel board including component
In commer Main- 01 number of 125(80-125)
Amps 4P MCCB with Rom & sprader link,25 Ka
& 01 nos of 63A 4P O/L changeover switch for
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(Icu=100%Ics)with shunt trip.with
axulary for BMS
Busbar- 04 numbers of 200Amps Electrolytic
copper busbar duly sleeved by color coaded
PVC sleeve & supported by suitable size DMC
Busbar DG - 04 numbers of 60 Amps
Electrolytic copper busbar duly sleeved by
color coaded PVC sleeve & supported by
suitable size DMC insulator.
Out going- (i) 63A 4P MCB 2 NOS FOR
POWER BDB GF,1f(Legrand/Schneider make)
Out going- (ii) 02 nos 32A 4P MCB LIGHT
BDB AC IDU BDB/LIGHT
BDB,LIFT,WATER,solar,ups(Legrand/Schneider
Out going- (iii) 01 no 32A 2P MCB LIGHT
BDB AC IDU BDB/LIGHT
BDB,LIFT,WATER,solar,ups(Legrand/Schneider
Instrument- (i)3 numbers phase indicating
lamp with toggle switch & HRC fuse.
(ii) 01 set of digital type multifunction meter
1078 85 with CT for voltage,current,frequency,PF,THD 0 0.00 0.00 0.00
Digitally signed by Rakesh
Head Description of Item Unit Qnty. Rate Amount
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of Legrand -
Cablofil make or equievalant reputed make &
model A catogory, ISI marked as approved
.The Load bearing capacity of the Cable Trays
should be minimum of 104.8Kg/meter at the
span of 1.5Meter as per UL
specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , FLOOR RACE WAY WITH JUNCTION
with internal dimensions of size 54mm(H) x
200mm(W), of Legrand - Cablofil make or
equievalant reputed make ISI marked as
approved .The Load bearing capacity of the
Cable Trays should be minimum of
104.8Kg/meter at the span of 1.5Meter as per
UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required.
EXTERNAL ESTIMATE OF SUBSTATION(AS PER
TATA POWER CHARGES)
Supplying & installation of 100x116 mm RS
Joist, 9 mtr long x 2 nosx23 Kg=414 Kg
Supplying & installation of Pressure Channel
Long( 9.2 K.g. per mtr.)x2 Nos
Supplying & installation of S/S DP bressing
1084 91 chhanel 75 x 40 x 6mm MS channel each 2.8 K.g. 12.00 148.68 1,784.16
mtr. Long( 6.8 K.g. per mtr.)x2 Nos
Supplying & installation of AB Swith & HG
1085 92 Fuse, Mounting Channel 75x40x6 -2.8 K.g. 12.00 148.68 1,784.16
mtr.long, 4 nos.(6.8K.g. per mtr.)
Supplying & installation of Cantilever chhanel
1086 93 for supporting AB Switch arm, 75x40x6-1 mtr. K.g. 8.00 148.68 1,189.44
Long, 2 nos.(6.8 K.g. per mtr.)
Contilever chhanel for supporting HG Fuse 50
nos.)4.5K.g. per mtr.
Supplying & installation of Angle for
Cantilever arrrangement for AB Switch & HG
Fuse 50 x 50 x 6 -2 mtr .each 2 nos.(4.5 K.g.
Supplying & installation of S/S DP bressing
Angle 50 x 50 x 6 mm - 2.8 mtr. Long 2
nos.(4.5 K.g. per mtr.) with side angel ( Total
Supplying & installation of Angle for mounting
1090 97 LT distribution Box 50 x 50 x 6 mm MS Angel - K.g. 12.00 148.68 1,784.16
2.5 mtrs.each Long 2 nos.( 4.5 K.g. per mtr.)
Supplying & installation of 11KV AB Switch 3
Pole (100 Amp.)
Supplying & installation of 11KV HG Fuse 3
Pole (100 Amp.)
Supplying & installation of 11 KV L.A. 12KV-
Digitally signed by Rakesh
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC Contracting with Ammendment 4.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
BOQ GAJ 001 NHM C.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .