PERIODICAL SERVICES, REPAIRS TO PLUMBING, SANITARY FITTINGS, INTERNAL WATER SUPPLY AND OTHER B/R WORKS AT AF STN PURNEA UNDER GE (AF) PURNEA.

Amount

M&L for preparation of old decorated plastered or un-plastered surfaced by brooming down and brushing with steel wire brush and applying one coat of white wash on walls including cornices completed all as specified and as directed.

M&L for preparation of old decorated plastered or un-plastered surfaced by brooming down and brushing with steel wire brush and applying one coat of white wash on ceiling including cornices completed all as specified and as directed.

M&L for preparation of old decorated surfaces of wall and applying one coat of oil bound distemper white or tinted on walls completed all as specified and as directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil bound distemper white or tinted on ceiling completed all as specified and as directed.

M&L for complete removal of old decorated surfaces of wall and applying two coats of oil bound distemper white or tinted on walls completed all as specified and as directed.

M&L for 3mm thick cement based wall care putty on walls completed all as specified and as directed.

M&L for preparation of old painted wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint 1st grade quality completed all as specified and as directed.

M&L for preparation of old painted steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint 1st grade quality on steel surfaces completed all as specified and as directed.

Description all as per srl item No. 8.00 here- in- above but n.exc 10cm width or girth on Steel surfaces complete all as specified and as directed.

M&L for preparation of old decorated surfaces of wall and applying one coat of cement base paint on walls complete all as specified and as directed.

M&L for preparation of old decorated plastered or un-plastered surfaced of wall and applying two coats of weather base paint (exterior emulsion) over a coat of primer complete all as specified and as directed.

Taking down cement plaster on walls, including racking out joints, hacking for key, scrubbing down with water etc. and remove rubbish from site of work complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6), finishing and smooth with out extra cement,complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or conctrete surface in cement mortar (1:4) finished even and fair without using extra cement complete all as specified and as diretced.

M&L for preparation of new plastered wall surfaces and applying of two coats of oil emulsion distemper on walls complete all as specified and as directed.

M&L for preparation of new plastered surface of wall applying of two coats of cement base paint over a coat alkali resistant primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC(1:3:6), type C-2, (using 40 mm graded stone aggregate) as in plinth protection and finished the surface even and smooth without using extra cement,complete all as specified and directed.

M&L for 100 mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base flooring.complete as specified and as diredted.

M&L for 25mm thick PCC (1:2:4) type B0 (using 12.50 mm graded crushed stone aggregate) finished even and rough in sub floor/levelling course to recieve floor finishes, complete all as specified and directed.

M&L for non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, in floors etc. over and including 15 mm thick cement mortar (1:6) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, , complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE.

M&L for coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc.over and including 15 mm thick cement mortar (1:6) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, , complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE.

Description all as per serial item No. 23.00 here-in-above but in verticle surfaces such as skirting/dado laid over and including 10 mm thick backing coat in cement mortar (1:4) on brick or concrete surface, complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE.

M&L for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x350x7mm thick quality not less than group II, straight edge, k, as on skirting , dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick backing coat in cement mortar (1:6),complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

Dismantling of Stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, aprons etc. complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with over and including screed bed or bedding layer of mortar 20mm thick in cement mortar (1:4), with and including necessary moulding full round complete all as specified and as directed.

Rounding to edges of stone slabs on edge, such as in steps, cooking platform, and other similar situation complete all as specified and directed.

Taking up or down 15 mm dia bore steel tubing and connection including cleaning for refixing or remove to store complete all as specified and directed.

Taking up or down 20 mm dia bore steel tubing and connection including cleaning for refixing or remove to store complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc, and making good, cutting not exceeding 10 cm girth, in brick walls complete all as specified and directed

S&F repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe))including trap and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified .

S&F in repairs vitreous china wash down water closet (Padestal pattern) white with P or S trap, with and including white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device with 32mm dia polyethylene flush pipe etc (excluding fixing bolts flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, of capacity 10 Litres, with and including brackets & flush pipe complete all as specified and directed.

S&F in repairs wash hand basin vitreous China, white, flat back of size (550x400)mm, cutting for and pinning ends of brackets and waste coupling of PTMT for glazed ware basin etc with long screwed shanks and fly nuts, full threaded flage end bedded in white cement with and including PVC waste pipe with waste coupling of PTMT (half or full threaded Minimum weight 32mm- 45gms) for required length complete all as specified and directed.

S&F in repairs vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms), complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm long etc complete all as specified and as directed.

S&F in repairs 15mm bib taps, fancy type, cast copper alloy, chromium plated long body, with crutch or butterfly handle, screwed down, screwed with wall flange for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs stop valves 15mm dia (concealed type), cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed with long shank and cup complete all as specified and as directed.

S&F in repair pillar tap 15 mm dia cast copper alloy, fancy tpye with capstan heads, chromium pleted screwed down, high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed, complete all as specified and as directed.

S&F in repair waste filtting (Coupling), brass chromium plated for 32mm dia glazed ware sink , basin, urinal etc .with long screwed shanks and fly nuts flazed ends bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair waste filtting (Coupling), brass chromium plated for 40mm dia glazed ware sink , basin, urinal etc .with long screwed shanks and fly nuts flazed ends bedded in red lead cement and other end complete all as specified and as directed.

S&F in repairs of tubular towel rail brass chromium plated 20mm dia D type, 600mm long between flange etc complete all as specified and as directed.

S&F in repair PVC waste pipe 32mm dia for wash basin and sink 01 mtr long complete all as specified and directed

S&F in repair PVC waste pipe for urinal/kitchen sink 38/40mm dia,complete all as specified and directed

S&F 500 litre capacity rotational moulded polyethylene water storage tank (Cylinderical vertical with close top) three layered, hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks and removing to store with and including provision of all GI inlet pipe, GI outlet pipe, GI overflow, GI drain pipe and anti mosquito cap with all fittings complete all as specified and as directed.

S&F 1000 litre capacity rotational moulded polyethylene water storage tank (Cylinderical vertical with close top) three layered, hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks and removing to store with and including provision of all GI inlet pipe, GI outlet pipe, GI overflow, GI drain pipe and anti mosquito cap with all fittings complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water tank Cover upto 1000 ltr capacity , fixed with hinging arrangement or locking arrangement including all necessary fittings complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repair Brass CP Mixer for mixing hot and cold water for WHB/Sink/wall screwed down for iron pipe and fixed, any type including all necessary fittings complete all as specified and as directed.

S&F in repair ball valves suitable for 20 mm bore dia pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic valve ball screwed for iron pipe and fixed (Minimum weight 20 mm - 210 gms) complete all as specified and as directed.

S&F in repair ball valves suitable for 25 mm bore dia pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic valve ball screwed for iron pipe and fixed (Minimum weight 25 mm - 455 gms) complete all as specified and as directed.

S&F in repairs 15mm bib taps two way, fancy type, cast copper alloy, chromium plated long body, with crutch or butterfly handle, screwed down, screwed with wall flange for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F bathroom mirror PTMT 900x750mm,complete all as specified and as directed. Make - Prayag , Cat No - 553 or equivalent make of parryware/ hindware / saint gobain.

S&F in repairs swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms) complete all as specified and as directed.

S&F in repair shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (Minimum weight 40gms) complete all as specified and as directed.

S&F in repairs cast copper alloy chromium plated flexible health faucet with 1.2 mtr long tube and clamp complete all as specified and as directed. Make - Prayag , Cat No - 451 or equivalent make of parryware/ hindware

S&F in repair sinks with drainage board made of stainless steel 1 mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 355 mm x 165 mm, complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size (915mm x 460mm) bowl size (410mm x 330mm x 160mm) complete all as specified and as directed.

S&F PVC (SWR) rain water 75 mm pipe single socketed in any length with rubber ring joint, fixed to walls with PVC clamp and all fittings including taking down old pipe, complete all as specified and as directed.

S&F PVC (SWR) rain water 110 mm pipe single socket in any length with rubber ring joint, fixed to walls with PVC clamp and all fittings including taking down old pipe, complete all as specified and as directed.

S&F PVC (SWR) Bends 75 mm dia provided with access door complete all as specified and as directed.

S&F PVC (SWR)110 mm bend bore bends with access door complete all as specified and as directed.

M/S. Suryabanshi Construction

M/s SKP CONSTRUCTION

M/S Parmod Johar

MSRAMANUJSINGHSONS

M/S. KESHAB CHANDRA GHOSH

ALAM ENTERPRISES