Replacement of 2 Nos. 150 Cs VT Axial Flow Pumps with 2 No 650 HP Motor HT 3.3 KV at Pump House MC-1 Of M.Garh Canal having lift 23.02 ft

Amount

Replacement of 150 Cs. existing V.T. axial flow pump having lift 23.02’ including delivery pipe & bend (MS IS 2062 Gr. Fe 410 WA) including flanges, welding, nut-bolts, siphon breaker valve as per site, erection & commissioning including any leftover item with epoxy coating paint both side as per specification approved by technical committee (Annexure-A). Including dismantling of old existing pump and shifting to store as directed.

Providing & fixing by making required size /length at site in pair of MS cross Girder (ISMB) of size 500mmx200mm for foundation of 150 CS VT Axial Flow pump including supply,fixing & welding on bottom side of ISMB through out length with MS flat of 200mmx25 mm thick. One end of ISMB shall be grouted into wall by making arrangement Of PCC block of suitable size as per weight of pump set of 150 Cs capacity and other end shall be welded with fixing of A.I. L- bracket and nut/bolts/washers etc into existing ISMB member. Including Material & Labour for applying primer coat with metal primer on new steel or iron work including preparation of surface and Material & labour for painting two coats excluding primer coat with ready mixed paint (Epoxy paint) for metallic surface in all shades on new steel or iron work. Taking down by cutting / welding the existing rusted/ old foundation girder for fixing new girder at site. MAKE: TATA/JINDAL/SAIL/VAIZAG

Providing & fixing by fabrication of pedestal frame structure vertically fixed on PCC Floor to support the M.S Bend of 150 Cs. VT Axial Flow Pump with wrought iron & mild steel (using angles, flats, square bars, tee & channels) ladders, grills, grating Frames, window guards iron doors openable or fixed stair case or parapet or any other type of railing, gates & tree guards etc. including cost of screws & welding rods or bolts & nuts complete fixed in position as per site requirement. Including Providing and fixing anchor bolt 20 mm dia N/S item 300 mm length (SS304) of suitable quantity, Providing and fixing anchor bolt 20 mm dia N/S item, 200 mm length (SS304) of suitable quantity, Appling priming coat with metal primer of approved make on new steel or iron work including preparation of surface and Painting two coats of approved make excluding priming coat with ready mixed paint (epoxy paint) for metallic surface in all shades on new steel or iron work. MAKE of Steel : TATA/JINDAL/SAIL/VAIZAG

Supply and commissioning of Induction motor 650HP suitable for 150 cs. VT Axial flow pump having lift 23.02’ HP650, KW 485, RPM 495, Voltage 3.3KV., 3 phase, 50HZ, space heater 2 no 500 Wt, Bearing SKF/FAG as per specification approved by technical committee (Annexure-B).

Credit of Old Scrap of Iron (Actual weight of old scrap will be measured by the committee)

Credit of Old Scrap of Gun Metal (Actual weight of old scrap will be measured by the committee)

Credit of Old Scrap of Copper (Actual weight of old scrap will be measured by the committee)

Credit of Old Scrap of Aluminum (Actual weight of old scrap will be measured by the committee)

Third party inspection TPIA Charges

Sahil Engg. Works