Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹2.6 Craccepted-finance | ₹2.6 Cr | accepted-finance |
Tender Value
₹2.5 Cr
EMD Value
₹3.8 L
Closing Date
30 Dec 2025, 10:59 pmClosed
Directorate of Municipal Administration
Package-01 Construction of Building, devopment of Roads, Drains, Park and Street light works at Ward No 02, 03, 05, 17, 19, 22 and other wards in Nanjangud CMC limits under Amrutha Nagarothhana Phase4 scheme
245499
DMA/2025-26/OW/WORK_INDENT48778/CALL-2
Open
Other Works
DMA District Urban Development Cell Mysuru
8 documents required · 8 mandatory
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactory completed, at least one similar road and drain development work of value not less than Rs.148.38 Lakhs as prime contractor
Executed in any one year (for a continuous period of 12 months) the following minimum quantities of work 1)Earthwork excavation / Embankment 2520 Cum, 2)Cement Concrete ( Plain & Reinforced) 430 Cum, 3) Steel reinforcement/ Structural Steel 33 Tonne, 4)Construction of Granular Sub base /Water Bound Macadam / Wet Mix Macadam 341 Cum 5)Asphalting ( Bituminous Concrete/ Semi Dense Bituminous Concrete/Bituminous Macadam/Dense Bituminous Macadam)-139 Cum 6)Supply, Erection and installation of Children play & Gym Equipment / similar Fabrication Works-200 Nos
Tenderer or his identified sub-contractor should have valid electrical license for executing electrical works issued by the officer not below the rank of Chief Engineer or Equivalent and executed similar electrical work totaling Rs.20.51 lakhs in any one year (i.e., 2020-21 to 2024-25)
Achieved in at least two financial years a minimum annual financial turnover (in all classes of civil engineering onstruction works only) of Rs. 593.5Lakhs
Liquid asset and or availability of credit facilities of no less than Rs 75.45 Lakhs
₹5,000
₹3.8 L
30 Dec 2025
9 Dec 2025
31 Dec 2025
22 Dec 2025
16 Dec 2025
Package-01 Construction of Building, devopment of Roads, Drains, Park and Street light works at Ward No 02, 03, 05, 17, 19, 22 and other wards in Nanjangud CMC limits under Amrutha Nagarothhana Phase4 scheme
Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not excee...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation,top ...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per...
Providing and Filling in foundation with granite / trap broken metal 100mm and down size with approved sand including hand packing, ramming, watering, including cost of all materials an...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...
Compacting Original Ground. Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with wa...
Granular Sub-Base. Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers wit...
Wet Mix Macadam (Plant mix method). Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical...
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone...
Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, ...
Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wid...
Sand Filling in Wells complete as per Drawing and Technical Specifications. Sl. No.11.36, Page No.112 of PWD SR 2023-24 of Volume 3
Filling Pot-holes and Patch Repairs with Open-Graded Premix surfacing, 20mm (using VG-30 Grade Bitumen).Removal of all failed material, trimming of completed excavation to provide firm vertical face...
Prime Coat over WMM/WBM Providing and applying primer coat with SSI grade Bitumen Emulsion on prepared surface of granual base including cleaning of road surface and spraying primer at the rate of 0...
Bituminous Macadam Grading - II for traffic lessthan20 MSA Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bit...
Dense Graded Bituminous Macadam Grading - II for traffic lessthan20 MSA Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified grading, ...
Bituminous Concrete Grading II for traffic lessthan20 MSA Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bi...
Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned w...
Semi Dense Bituminous Concrete Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bitumino...
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant ISCo...
Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. ...
Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). Si No.5.4, Page No.9 of PWD SR 2023-24 of Volume-2.
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, t...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing & fixing of 3-track x 2-panel sliding windows made out of multichambered UPVC(Matching to RAL-9016) sections and with minimumTiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer)...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately, PWD CSR 2023-2024, IN-2.18A, PN11, VOL-III, By Manual Means, Bi...
Providing and fixing M.S. grills of required pattern in frames of win- dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to ope...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concret...
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per d...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all ...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Direction and Place Identification Signs with size more than 0.9 m2 size Board.Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2012 made of high intensi...
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pain...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...
RELAX SWING is made up of A-class structure materials. The top beam is made up of 50mm NB M.S A-class pipes housing 2 bearing sockets cach containing 2 ball bearings The corner brackets are made up of...
APPLE WHIRL is made up of A-class structure materials. The center shaft is made up of 100mm NB MS pipe housing a set of ball bearing and taper bearing. The platform is made out of Aluminum antiskid pl...
DUCK SWING is made up of A-class structure materials. The Structure is made up of 32mm MSA-class pipes. The chains are of 25mm X 12mm X 5 mm. The length of the equipment is 8 The ducks seats are made ...
ROPE-CLIMBER is made up of A-class structure materials. The Structure is made up of 40mm NB MS A-class pipes The High Quality nylon rope is used. The connecting balls are LDPE. The above equipment is ...
ROPE-CLIMBER is made up of A-class structure materials. The Structure is made up of 40mm NB MS A-class pipes The High Quality nylon rope is used. The connecting balls are LDPE. The above equipment is ...
STD FRP SLIDE is made up of M.S A-class structure materials. The sliding portion is made up of Fiber reinforced plastic. The Structure in, the ladder is made up of (main footings) 25mm NB and steps of...
ARCH SEAT WHEEL is made up of A-class structure materials. The center shaft is made up of 100mm NB MS pipe housing a set of ball bearing and taper bearing. The sets are made up of recycled plamic. The...
Donald Duck Rider is made up of A-class structure materials. The riders are FIBER REINFORCED PLASTIC/ LDPE. It is Supported by heavy-duty coil spring. The above equipment is duly red-oxide and painted...
Fish Rider is made up of A-class structure materials. The riders are FIBER REINFORCED PLASTIC / LDPE. It is Supported by heavy-duty coil spring. The above equipment is duly red-oxide and painted in ma...
Horse Rider is made up of A-class structure materials. The riders are FIBER REINFORCED PLASTIC/ LDPE. It is Supported by heavy-duty coil spring. The above equipment is duly red-oxide and painted in mu...
4-SEATER SEE-SAW is made up of A-class structure materials. The main bears are made up of 65mm NB MS A- class pipes. The Structure i.e., the legs are made up of 32mm NB MS A class pipes bousing a heav...
UBBLE RIDER is made up of A-class structure materials. The Structure is made up of 40mm NB M.S A-class pipes & handle and foot rest are in 20 ram NB MS A Class pipe. Recycled plastic Seat. The above e...
Providing & Fixing Sadarahalli Granite benches with back rest using supporting piece 2 No.of size (0.60x1.20x0.05)mtrs Sadarahalli Granite to cutting to required shape and sitting slab size(1.55x0....
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting & C.I bra...
Providing and fixing white vitreous china clay, water closet orissa patterrn of size 580x440mm with integral type footrests, 100mm S or P trap,10litre low level white P.V.C flushing cistern, including...
Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with CI brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good ...
Providing and fixing wash basin with C.I brackets,15mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wall...
Providing and fixing PVC waste pipefor sink or wash basin including PVC waste fittings complete.32mm dia flexible pipe PWD SR 2023-24 I No 14.28.2.1 P No 136 Vol 2
Providing and fixing PVC waste pipefor sink or wash basin including PVC waste fittings complete.40mm dia flexible pipe PWD SR 2023-24 I No 14.28.2.2 P No 136 Vol 2
Providing and fixing mirror of superior glass(of approved quality) and of required shape and size wih plastic moulded frame of approved make and shade with 6mm thick hard board backing: ...
Providing and 600x120x5 mm glass shelf with edges round off supported on andised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws,rawl plugs etc comp...
Providing and fixing C.P. brass toilet paper holder. PWD SR 2023-24 I No 14.34.1 P No 136 Vol 2
Providing and fixing PTMT Bottle Trap for wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the center of the waste coupling,...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screw with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with t...
Providing and fixing PTMT shelf 440mm long, 124mm width and 36 mm height of approved quality and colour, weinghing not less than 300g PWD SR 2023-24 I No 14.41 P No 138 Vol 2
Providing and fixing brass bib cock of approved quality: 20 mm nominal bore PWD SR 2023-24 I No 13.2.2 P No 117Vol 2
Providing and fixing PVC waste pipefor sink or wash basin including PVC waste fittings complete. PWD SR 2023-24 I No 14.28.1 P No 136 Vol 2
Providing and fixing PVC waste pipefor sink or wash basin including PVC waste fittings complete. PWD SR 2023-24 I No 14.28.1.2 Vol 2
Providing and fixing brass stop cock of approved quality: 20 mm nominal borePWD SR 2023-24 I No 13.3.2 P No 117Vol 2
Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic float complete:20 mm nominal bore PWD SR 2023-24 I No 13.5.2 P No 117Vol 2
Providing and fixing brass ferrule with C.I mouth cover including boring and tapping the main:25mm nominal bore PWD SR 2023-24 I No 13.7.3 P No 118 Vol 2
Providing and fixing brass ferrule with C.I mouth cover including boring and tapping the main:25mm nominal bore PWD SR 2023-24 I No 13.5.3 P No 117Vol 2
Providing and fixing unplasticised PVC connection pipe with brass union:20 mm nominal bore(30cm length) PWD SR 2023-24 I No 13.8.1.2 P No 118 Vol 2
Providing and fixing C.P. brass shower rose with 15 to 20mm inlet: 150 mm diameter PWD SR 2023-24 I No 13.9.2 P No 118 Vol 2
Providing and fixing PTMT grating of approved quality and colour:circular type 125mm nominal dia PWD SR 2023-24 I No 13.22.1.2 P No 120 Vol 2
Providing and fixing PTMT soapdish holder having length of 138 mm breadth 102 mm height of 75 mm with concealed fitting arrangements, weighing not less than 106g. PWD SR 2023-24 I No 13.26 P No 121 V...
Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowerin into trenches, laying true...
Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowerin into trenches, laying true...
Supply and delivery at site special moulded variety PVC reducer as per IS:7834/1987 and fabricated as per IG124/1984 with ISI mark with its latest amendments PWD SR 2023-24 I No 10.13.6 P No 119 Vo...
Supply and delivery at site special moulded variety PVC reducer as per IS:7834/1987 and fabricated as per IG124/1984 with ISI mark with its latest amendments, 110mm dia PVC Reducer PWD SR 2023-24 I No...
Supply and delivery at site special moulded variety PVC elbows as per IS:7834/1987 and fabricated as per IG124/1984 with ISI mark with its latest amendments 75mm dia PVC elbows, PWD SR 2023-24 I No 1...
Supply and delivery at site special moulded variety PVC elbows as per IS:7834/1987 and fabricated as per IG124/1984 with ISI mark with its latest amendments 110mm dia PVC elbows PWD SR 2023-24 I No 10...
Supply and delivery at site special moulded variety PVC bend as per IS:7834/1987 and fabricated as per IG124/1984 with ISI mark with its latest amendments 75mm dia PVC bend PWD SR 2023-24 I No 10.11...
Supply and delivery at site special moulded variety PVC bend as per IS:7834/1987 and fabricated as per IG124/1984 with ISI mark with its latest amendments 110mm dia PVC bend PWD SR 2023-24 I No 10.11...
Supply and delivery at site special moulded variety PVC couplers as per IS:7834/1987 and fabricated as per IG124/1984 with ISI mark with its latest amendments 75mm dia PVC coupler PWD SR 2023-24 I No...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet an...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimension ) with modular brick of CD 75 in cement morter 1:6 bed concrete 150mm thick with 1:3:6 plastering...
Supply and delivery at site special moulded variety PVC couplers as per IS:7834/1987 and fabricated as per IG124/1984 with ISI mark with its latest amendments 110mm dia PVC coupler PWD SR 2023-24 I No...
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...
Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...
Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (PWD Electrical CSR 2023-2024, IN-3.6.9, PN-9, 32A DP Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. , 6/16A Universal Socket (PWD Electrical CSR 2023-2024, IN-3.6.10, PN-9 Vol...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supplying and Fixing........mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street...
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4" dia telescopic M. S. pipe, with 2" dia1.5m long M.S.Bracket and are welded with suitable angle, using 6mm thick M. S. sh...
Brass Cable Gland 32 mm. CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 24, IN-63.02, PN-28, VOL-6
Supplying and Fixing........mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. CSR FOR KPTCL, ESCOMs & PWD Electrical...
Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greaterthan 80. Power Input: 220-240V@ 50...
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree ...
Supplying & fixing of retrofit type - LED bulb ...... W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIgreaterthan 70%. efficacy greaterthan80 lumen per W, lifegreatert...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling /rafters / girders using 23/0.0076" twin twisted PVC insulated wires, re...
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 2024, IN-3.14.6, PN-10, VOL-6, 6A Lamp Holder
Supplying And Fixing Metal Fan Box with Round Hook. CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 24 I No 1.13 P No 4 Vol 6
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module CSR FOR KPTCL, ESCOMs & PWD Electrical 202...
Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23...
Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 24 I No 6...
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. . 32-40A 2 pole CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 24 I N...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. . 16-25 A 2 pole CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 24 I ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.CSR FOR ...
Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 24, IN-5.48, PN-21, VOL-6.
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 24 I No 5.30 P No 19 ...
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 24, IN-5.7.2, PN-15, VOL-6, 32...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The...
Guy Wire & GI Wire as per IS-2141, GI Wire 8 SWG, CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 2024, IN-8.02, PN-55, VOL-6
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975, CSR FOR...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm, CSR FOR KPTCL, ESCOMs & PWD Electrical ...
Optical Fibre Cable (OFC) and its Accessories, CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 24, IN-66.05, PN-30, VOL-6, HDPE/PLB Pipe 40/33 mm
Fabricating, supplying and erecting Swaged tubular Pole of height ...m having three sections, and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved qual...
Aluminium End Terminal (Lug), CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 2024, IN-60.01, PN-27, VOL-6. 10Sqmm
Aluminium End Terminal (Lug), CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 2024, IN-60.02, PN-27, VOL-6. 16Sqmm
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable, CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 2024, IN-35.01, PN-15, VOL-6, up to 4C x 50 Sqmm,
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. R FOR K...
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter. CSR FOR KPTCL, ESCOMs & PWD Electrical 2023 - 24, IN-5.35, PN...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-4_INDENT48778_Pkg1_Call2_Rev1.pdf
Tender Document • 2.36 MB
Download all tender documents and submit your bid