Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.1 LAccepted-AOC HATIA ROAD DANGALPARA DISTT DUMKA JHARKHAND PIN 814101 | DUMKA | DUMKA | JHARKHAND | 814101 | L1 | Accepted-AOC Due to L1 | |
| 2 | L2₹23.5 L+₹1.3 L (5.76%)Rejected-Finance PO BUD BUD DIST BURDWAN WEST BENGAL PIN 713 403 | BUD BUD | BURDWAN | WEST BENGAL | 713403 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹23.7 L+₹1.5 L (6.52%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹24.2 L+₹1.9 L (8.52%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹28.7 L+₹6.4 L (28.7%)Rejected-Finance ANURAGPUR PO PANAGARH BAZAR DIST BURDWAN WEST BENGAL 713 148 | PANAGARH BAZAR | BURDWAN | WEST BENGAL | 713148 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
28 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Panagarh
GE AF PANAGARH MES AF STATION PANAGARH PO BIRUDIAH WEST BENGAL 713148
REPAIR TO RIGID PAVEMENTS, JOINT FILLING, CRACK, DTGM BOARDS AND CERTAIN MISC WORKS FOR AIRFIELD AREA AT AIRFORCE STN ARJAN SINGH UNDER GE (AF) PANAGARH
2023_MES_600367_1
8712/e8
Open Tender
Civil Works - Roads
Item Rate
180 days
AF STATION PANAGARH
please refer tender documents
7 documents required · 7 mandatory
₹500
GE AF PANAGARH
₹60,000
Yes
19 Jul 2023
2 Jun 2023
30 Jun 2023
2 Jun 2023
28 Jun 2023
16 Jun 2023
Amount
Cutting and Raking out old sealing compound including damaged filler board and back up rod from the old existing expansion joints of size 25 to 35 mm wide including cleaning the joints portion throughly to ensure dust free using compressed air by air blower and filled pre moulded compressible synthetic filler board as per manufacturer instruction and provision of closed cell, medium density, crossed linked polythene foam back up rod of 30 mm dia or more, over pre moulded compressive filler board, priming vertical top surface and 15 mm filled with polyurethyne / polysulphide base sealant (complying with BS 5212, BS 4254 and EN 41875-2003, with min MAF +30% with 10 years performance guarantee) and finishing the joints properly leaving 3 mm gap from top surface of concrete, applying masking tape on edges of joint to prevent accidental spillage of sealant to give neat finish to sealant and removing the masking tape after filling of sealant all as per the directions of the manufacturer, complete all as directed by Engr-in-charge. (Note : Polyurethane Sealant should be filled by Sealant filler Gun only).
Cutting and Raking out old sealing compound including damaged back up rod from the old existing expansion joints of size 25 to 30 mm wide and 15 mm (average) deep , including cleaning the joints portion throughly to ensure dust free using compressed air by air blower and filling the existing joints with polyurethane based sealent (complying with latest IRC-57-2006 with 10 year warranty) over polythene foam back up rod of 30 mm dia after applying a coat of primer to vertical surfaces of concrete which are in the contract with the compound and finishing the joints properly leaving 3 mm gap from top surface of concrete, applying masking tape on edges of joint to prevent accidental spillage of sealant and removing the masking tape after filling of sealant all as per the directions of the manufacturer, complete all as directed by Engr-in-charge. (Note : Polyurethane Sealant should be filled by Sealant filler Gun only).
Cutting and Raking out old sealing compound including damaged back up rod from the old existing joints of size 08 to12 mm wide and 15 mm (average) deep including cleaning the joints portion throughly to ensure dust free using compressed air by air blower and filling the existing joints with polyurethane based sealent (complying with latest IRC-57-2006 with 10 years warranty ) over polythene foam back up rod of 30 mm dia after applying a coat of primer to vertical surfaces of concrete which are in the contract with the compound and finishing the joints properly leaving 3 mm gap from top surface of concrete, applying masking tape on edges of joint to prevent accidental spillage of sealant and removing the masking tape after filling of sealant all as per the directions of the manufacturer, complete all as directed by Engr-in-charge. (Note : Polyurethane Sealant should be filled by Sealant filler Gun only).
M & L for broken spalled edges of joints, tiny pot holes etc of existing concrete slab by cutting/forming, square/recangular grooves of size 10 to 30 mm wide and 20 to 30 mm deep with mechnical cutter wider towards bottom to form key with the existing quality concrete, cleaning & dusting the grooves using compressed air to remove all dust and dirt by air blower and repairing with elastomeric concrete after application of specified primer and removal of rubbish to distance exceeding 250mtr and not exceeding 500mtr and depositing complete as in repair all specified and directed by Engineer-in-Charge.
M & L for concrete slab or pot/pin holes n.exc 1Sqcm, surface making to rectangular section removing all those forign materials and disposing the same to a distance n.exc 500 mtr and cleaning the surface using compressed air by air blower and repairing with priming and filling elastomeric concrete. All work shall be carried out as per manufacture instruction, completeas as in repair all as specified and directed by Engr-in-charge.
M & L for preparation of old bituminious / black top surface by brushing with wire brushes for removing cake, mud/loose perticales etc. sweeping with broom and by compressed air blower and applying evenly Polymer Modified Emulsion (PME) @ 5kg per 10 sqm complete all as specified and directed by Engineer-in-charge.
Providing services for hiring of 01 No BACKHOE LOADER not less than 0.55 cum GP shovel of loader performance (including 01 driver, 01 No helper, necessary fuel, oil and lubricant etc) with Hour Run including licenced driver, helper, POL, lubricants etc.for levelling of undulation portion and lifting of cable duct and drain covers around the Runway/Taxi track and link roads of Runway within Air Force Station Panagarh complete all as specified and as directed by Engineer-in-charge as and when required basis. (NOTE : Reporting duty place is Runway site of Air Force Rampurhat There will be no dead hours. The hours age for the purpose of "hours of duty" shall be reckoned from the point of reporting for duty to the point of T&P released. No hours will be allowed to drivers for lunch/breakfast/dinner/garaging or for drawn of petrol/diesel etc).
M & L for moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering compacting with 8-12 ton power roller to compact upto 98% modified proctor density complete all as specified and directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick, stone or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.
M&L for PCC type C1 (1:3:6), (using 20 mm graded stone aggregates) as in coping etc including formwork complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness (below or above the ground level ) and disposing of rubbish materials where directed complete all as specified and directed.
M&L for 150mm thick PCC (1:2:4), type B-2 (using 40mm graded stone aggregates) as in hardstanding laid in panels finshed fair and even complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided and disposing materials where directed complete all as specified.
Separating, scraping and cleaning of reinforcement (Demolition of concrete measured and paid separetely) complete all as specified and directed.
M&L for providing pre-cast cement concrete landing slabs, cover slabs (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete (1:2:4) type B-1 using 20mm grading stone aggregate and setting in cement morter (1:6) with necessary form work complete all as specified and directed. (Reinforcement shall be measured and paid separetely)
M&L for mild steel TMT bars of Fe 500D of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
ROY ENTERPRISE
BABY ENGINEERING ELECTRICAL MECHANICAL STORES
CLASSIC CONSTRUCTION AND SUPPLIERS
UNIQUE ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .