REPAIR TO ROOF SHEDS FALSE CEILING AND MISC REPAIRS AT OD TECH AREA INCLUDING REPAIRS TO FLOORING BRICK WORK STEEL DOOR SHUTTERS GATES AND CONNECTED REPAIR WORK AT PTMS AREA UNDER GE AVADI.

Amount

Dismantling Asbestos cement (corrugated, semi corrugated, plain etc.) sheets in roof coverings complete all as specified and as directed

M&L for 6mm thick non-asbestos fibre cement corrugated or semi corrugated sheets in roofs fixed with 'J' type hooks etc complete all as specified and as directed

All as per item No 2.00 here in before, but except material and fixing only non-asbestos fibre cement sheets obtained from item no 1 complete all as specified and as directed

M&L for non-asbestos fibre cement two piece adjustibal plain wing ridge 6mm thick with 'J' type hooks complete all as specified and as directed

Dismantling wrought iron work or mild steel of any description not otherwise provided for truss/purlin/rafter etc complete all as specified and as directed

Dismantling framed trusses nexc span of 10m completed all as specified and as directed

S&F Fe-250 as in Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed

S&F Rolled sections Fe-410W (Gde E-250) quality A as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates complete all as specified and directed

Dismantling plain /corrugated steel sheeting any gauge, any thickness in roof covering, valley gutters or wall cladding etccomplete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

Description all as per item No.10.00 but fixing only corrugated galvalume sheet obtained from Sl item No.9.00 complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed wih self tapping screws all as specified and directed

S&F 0.63mm thick Black, corrugated Galvanised Iron mild steel sheeting with two corrugation side lap,fixed with coach screws and washers, in roofs, walls etc. complete all as specified and directed

S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges,hips,valley gutters, drip and straight flashings (length and girth fixed) with grade of zinc coating 275 complete all as specified and directed

S&F 2 mm thick clear embossed/opal white polycarbonate sheet with UV stabliser having atleast 60-80% transparancy as per relevant IS including fixing side and lapse with seal cover complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparation old painted surface apply two coat of synthetic enamel paint over one coat of red oxide zinc chromium primer complete all as specified and directed

Taking down rainwater pipes (any size of pattern) including all fittings, heads, shoes, bends, swan necks etc., including cleaning or refixing or removal to store complete all as specified and directed.

S&F PVC 110 mm bore rain water pipes confirming to IS 13592 type 'B' including necessary rubber ring joints incl MS flat iron clamps of size 25mm x 3mm @ 1.2 m c/c for each pipes all as specified and directed

PVC (SWR) 110 mm bore bends any radius complete all as specified and directed.

Dismantling of ceiling board of any thickness. Including frame work complete all as specified and directed.

M&L for aluminium snap and false ceiling of panels of size 600 x 600 mm using aliminium anodised wall angle of size 25 x 25 x 1.5 mm thick fixed to walls with rawl plug and screws n exc 1.50m centre to centre and intermidiate panels using main "Tee" and cross "Tee"aluminium anodised section of size 35 x 25 x 1.50 mm and 25 x 25 x 1.50mm thick suspended with and including 2mm dia GI wire n exc 1.2 m centre to centre including PVC coated gypsum ceiling tiles of 9mm thickness any description, not otherwise, described, over 10cm width or girth complete all as specified and as directed..

Servicing of steel rolling shutters of area exc 10 Sqm but n.exc 25sqm (single opening) gear operated by rectification of minor defects, overhauling, greasing lubricant of guid rails and refixing clamps riveting including necessary repairs to the locking arrangements and replacement of worn-out spare parts such as gear/worm/interlocking lath/ball bearing in order to bring the rolling shutters to easy operation and smooth functioning complete all as specified and as directed. Note:- Cost of gear/worm/interlocking lath/ball bearing will be measured and paid as supply only under respective items complete all as specified and directed

Dismantling wrought iron or mild steelwork of any description not otherwise provided all as specified and as directed

S&F 1mm thick steel rolling shutters with/without ball bearing as specified including top cover anchoring rod hasp and staple and one shop coat of primer erected in position as indicated complete: push pull or manual type, complete all as specified and as directed

Supply only gear/worm (machine cut) including connecting mechanical device complete all as specified.

Supply only interlocking lath sections made out of cold rolled steel strips of 1.2mm thick and 75mm width complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.

M&L Brickwork with fly ash Old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

M&L Rendering 15mm thick in CM 1:6 on other than fair faces of brick work or stone masonry surfaces, even and smooth (without using extra cement) , complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper and one coat of 3mm thick wall care putty over a coat of alkali resistant primer complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L Glazed ceramic coloured tiles 350x 250x 7mm/ 450X 350X 7mm/ 450 x 300 x 7mm thick, as in vertical surfaces such as in skirting and dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick back coat in CM (1:4),complete all as specified and directed.

Taking up or down steel/uPVC water tubings and connections of 15mm bore pipe including cleaning or re-fixing or removal to store , complete all as specified and directed.

Taking up or down steel/uPVC water tubings and connections of 20mm bore pipe including cleaning or re-fixing or removal to store , complete all as specified and directed.

M&L for unplasticised PVC pipes 15mm bore of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed.

M&L for unplasticised PVC pipes 20mm bore of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed.

S&F in repairs 15mm bore stop valve/Angle cock, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed.

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe , all as specified and directed.

S&F in repairs 15mm bore fancy type longbody/swan neck Pillar taps bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified and directed

S&F in repairs 15mm bore fancy type Bib taps, cast copper alloy chromium plated with crutch or butter-fly handle screwed down, screwed for iron pipe or for brass ferrules, complete all as specified and directed.

S&F in repairs 15mm bore Bib tap standard of PTMT any colour screwed, for iron pipe (minimum wt 90gm), all as specified and directed.

S&F in repairs 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, minimum weight 90 gms, complete all as specified and directed.

S&F in repairs 15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) all as specified and directed

S&F in repairs 15mm long body Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 110gms, all as specified and directed.

S&F fixed in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142gms) complete all as specified and directed.

S&F 750 ltr capacity rotational moulded polyethylene water storage tanks (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed.

S&F in repair Lid for rotational moulded polyethylene water storage tanks (any capcity) complete all as specified and directed

Cleaning and removing all scale and dirt, etc, from tanks capacity exc 500 and n.exc 1000ltr and from mouths of circulating pipes, etc. all as specified and directed

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm,complete all as specified and directed all as specified and directed.

S&F in repairs Tubular towel rail, brass chromium plated 20mm dia D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs only brass chromium plated Health Faucet with 1mtr Flexible tube & Hook (Make Prayag or equivalent) complete all as specified and directed

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick, 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

S&F in repairs Vitreous China squatting pan of 'Orissa' pattern of size 580 x 440mm, white, with integral foot rests, complete including provision of lime concrete bedding all as specified and directed

S&F in repairs 10 ltr capacity PVC valveless symphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, complete all as specified and directed

S&F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including all joints all as specified and directed

S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, waste coupling PTMT, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified and directed

S&F in repairs Vitreous china bowl urinal flat back, of size 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including discharge pipe of PVC 32mm dia, fixed in repairs, complete all as specified and directed.

S&F in repairs 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms) all as specified and directed

S&Fin repairs PVC waste pipe 32mm bore all as specified and directed

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as specified and directed

Taking down PVC (SWR) pipes 110/75mm internal dia laid in trenches or fixed to walls incl all fittings complete all as specified and directed

S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed.

Taking down chowkats or frames not exc 1.5Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and as directed .

S & F of 30 mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both sides complete all as specified and directed.

S & F of anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed

S&F of Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

Taking down PVC chowkats or frames exc 1 Sqm not exc 2Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

S & F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification and drawings

S&F of Factory made soild PVC profiled panel door shutter 28mm thick withintegral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site incl all fittings(handles/tower bolt/sliding bolt/hinges etc as per specifications & drawing.

S&F 125 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S & F floor door stopper 150 mm size of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified and directed

S&F 75mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

S&F 150mm long Aluminium handles, cast type, anodised, all as specified and directed.

S&F 100mm long Aluminium handles, cast type, anodised, all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for grills and grating etc complete all as specified and as directed

S&F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar workon- forming to Fe.290.Gde-E-165 all as specified and directed

S&F in repairs 4mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and as directed.

S & F in repairs 4mm thick sheet glass ordinary quality, glazing with oil putty or wooden beads in squares nexc 0.5 sqm in each pane, complete all as specified and as directed

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L Glazed ceramic coloured tiles (300x200mm)/450x300 x 6 to 7mm thick, as in vertical surfaces such as in skirting and dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick back coat in CM 1:3,complete all as specified and directed.

M&L Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided

Dismantling of Stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as directed

M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick CM 1:4 screed bed, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

M & L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate, 100mm thick as in sub base to floor complete all as specified and as directed

M & L for 50 mm thick plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in flooring, finishing the surfaces concrete topping even and fair without using extra cement complete all as specified and as directed

M & L for Chequered cement concrete tiles with Grey cement and no pigment of size 300x300x25mm thick set, jointed and pointed in neat cement slurry in floors over 20mm thick screed bed of CM 1:4 complete all as specified and as directed

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection surfaces finished even and fair without using extra cement, complete all as specified and as directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed.

M&L Rendering 10mm thick on fair faces of brick work or concrete surface, in cement mortar 1:6 finished the surface even and smooth without using extra cement , complete all as specified

M&L Rendering 5mm thick in CM 1:4 with WPC compound over a coat of 10mm thick in CM 1:6 on other than fair faces of brick work surfaces, even and smooth (without using extra cement), complete all as specified and directed

Supply only liquid water proofing compound complete all as specified and directed

M&L Rendering 5mm thick on ceiling, in CM 1:3 finished the surface even and smooth without using extra cement, complete, all as specified and directed

M&L for preparation of newly plastered surface of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed

M&L for preparing newly plastered of ceiling surfaces and applying three coats of white wash complete all as specified and as directed

S & F of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (Fe 410 -W (Gde E- 250) quality A) (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed

S&F of 1.60 mm Mild steel, plain, black sheet for covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed,holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. complete all as specified and as directed

RUBYONEBUILDERS (BID ID -3352760)

SAMYDOSS CONSTRUCTIONS (BID ID -3352091)

M/s Omm Muruga Enterprises (BID ID -3358833)

pmv.enterprises (BID ID -3360911)

S K ENTERPRISES (BID ID -3352198)

Mariammal Constructions (BID ID -3349160)

bhakthavatsalam builders (BID ID -3352746)