Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.8 LAccepted-AOC | ₹19.8 L Quoted ₹16.8 L | L1 | Accepted-AOC L1 |
| 2 | L2₹17.9 L+₹1.2 L (7.06%)Rejected-AOC | ₹17.9 L+₹1.2 L (7.06%) | L2 | Rejected-AOC L2 |
| 3 | Rejected-Technical | - | - | Rejected-Technical Non Responsive |
| Sl No | Description | Qty | Unit | Shailesh Enterprise L2 | DP Enterprise L1 |
|---|---|---|---|---|---|
| 1.00Work of refurbishment/revamping of OHD line distribution at Rota printing press | |||||
| 1.01 | Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. (The qty. for this item shall be measured for gusset plates, base plates, bolts in M.T.) | 5.5 | MT | 92,750 ₹5,10,125 | 87,500 ₹4,81,250 Lowest |
| 1.02 | Providing, detailing, fabricating and fixing at desired location using M.S. chequered Plates of any thickness and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transporation of the same to site, erection at all heights and levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. | 3.2 | MT | 88,000 ₹2,81,600 | 84,700 ₹2,71,040 Lowest |
| 1.03 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc: 65 mm dia nominal bore | 125 | Rmt | 680 ₹85,000 | 633 ₹79,125 Lowest |
| 1.04 | Providing and fixing gun metal gate valve with C.I. wheel of approved :65 mm nominal bore | 3 | Each | 4,075 ₹12,225 | 3,900 ₹11,700 Lowest |
| 1.05 | Removing and refixing G.I. pipes of any size with all new fittings if
necessary complete including cleaning and painting. | 250 | Rmt | 232 ₹58,000 | 200 ₹50,000 Lowest |
| 1.06 | Excavation for foundation, substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits & general building works in soft/ disintegrated rock, sand stone, stiff clay, gravel, cobblestone, hard laterite, water bound macadam, wet mix macadam, asphalt mix carpet of any type, pitching, soling, paths and hardcore, lime concrete, plain cement concrete, stone masonry and all types of brick/ block masonry below ground level, rock boulders, etc. for depths/ lifts upto 1.5M measured from the ground level, including dressing/ trimming the sides, leveling of bottoms, manual dewatering, removing rank vegetation, backfilling in layers not more than 200mm thickness, watering, consolidating, compacting to achieve not less then 97% Modified Proctor density conforming to relevant IS, stacking in measurable heaps for future use within owners space or disposing within an initial lead of 150m as directed, loading, unloading, leveling excluding shoring, strutting etc. complete as directed by Engineer-in Charge. | 15 | Cum. | 1,460 ₹21,900 | 1,365 ₹20,475 Lowest |
| 1.07 | M-30 Grade SCC cement concret | 5 | Cum. | 8,900 ₹44,500 | 8,300 ₹41,500 Lowest |
| 1.08 | Removing, Refixing & Cleaning of 5000 Ltr water Polyethylene water storage tank (6 nos) | 30,000 | Litre | 26 ₹7,80,000 | 24 ₹7,20,000 Lowest |
Tender Value
Refer Docs
EMD Value
₹17,500
Closing Date
28 Jan 2026, 4:00 pmClosed
Dy.Ch.E.(ME) City
Municipal Workshop
As per SBD
2025_MCGM_1259851_1
Dy.Ch.E.(ME)/3672 /City dtd.15.12.25
Open Tender
Electrical and Maintenance Works
Item Rate
Municipal Workshop
Please refer Tender documents.
3 documents required · 3 mandatory
₹4,300
₹17,500
24 Jun 2026
22 Jan 2026
29 Jan 2026
22 Jan 2026
28 Jan 2026
22 Jan 2026
Work of refurbishment/revamping of OHD line distribution at Rota printing press
Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. (The qty. for this item shall be measured for gusset plates, base plates, bolts in M.T.)
Providing, detailing, fabricating and fixing at desired location using M.S. chequered Plates of any thickness and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transporation of the same to site, erection at all heights and levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc: 65 mm dia nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved :65 mm nominal bore
Removing and refixing G.I. pipes of any size with all new fittings if necessary complete including cleaning and painting.
Excavation for foundation, substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits & general building works in soft/ disintegrated rock, sand stone, stiff clay, gravel, cobblestone, hard laterite, water bound macadam, wet mix macadam, asphalt mix carpet of any type, pitching, soling, paths and hardcore, lime concrete, plain cement concrete, stone masonry and all types of brick/ block masonry below ground level, rock boulders, etc. for depths/ lifts upto 1.5M measured from the ground level, including dressing/ trimming the sides, leveling of bottoms, manual dewatering, removing rank vegetation, backfilling in layers not more than 200mm thickness, watering, consolidating, compacting to achieve not less then 97% Modified Proctor density conforming to relevant IS, stacking in measurable heaps for future use within owners space or disposing within an initial lead of 150m as directed, loading, unloading, leveling excluding shoring, strutting etc. complete as directed by Engineer-in Charge.
M-30 Grade SCC cement concret
Removing, Refixing & Cleaning of 5000 Ltr water Polyethylene water storage tank (6 nos)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.80 MB
BOQ_2187881.xls
BOQ • 0.30 MB
SBD.pdf
Tender Documents • 0.79 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .