NIT No GE/ND-27/2025-26

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, incluuding Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge. Note: Necessary double steel scaffolding where required upto two storey bldg.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repair 10 mm thick coloured polycarbonate multiwell sheet manufactured from high quality, UV stabilzed resins in roof covering incl necessary fittings & fixtures like aluminium strips, aluminium tee, coach screw and washers etc with silicon joints filler for fixing complete of any colour all as specified and directed by Engineer in charge.

Dismantling floor hearth or wall tiling including cement mortar bedding and removing rubbish of the premises complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (Square/ Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white of coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceremic tiles in vertical surface of size 600x600x7 mm on vertical Surfaces of wall on 10mm cement mortar 1:3 set and jointed in net cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for non skid ceremic tiles 7 to 8 mm thick (square/rectangle) area of each tiles exc 0.11 but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white /coloured cement laid over and incl 20 mm thick screed in CM 1:6 complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in floor or sub base complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for Sand filling under floors tiles including watering and consolidation complete all as specified and directed.

Taking down chowkhats or frame without taking off shutters exc 1.50 sqm but n.exc 4.0 sqm complete all as specified and directed.

S&F powder coated aluminum door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size (Make : Godrej/Harrison) 02 Nos tower bolt 150 mm , door handles, SS butt hinges 125 mm 04 Nos, hydraulic door closer and fittings complete, bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size and each shutter n.exc 0.95 mtr in width (Make of glass (MODI/ FLOAT/ ATUL) complete all as specified and directed.

M&L for single coat textured wall coating raised or recessed applied with spray gun on plastered, plywood or boarding design & pattern as approved incl making good the surrounding surface complete all as specified and as directed by Engr-in-Charge.

S&F for 12 mm thick plywood grade BWP, type BB fixed with screws to timber frame work including taking old existing board complete all as specified and directed.

S&F for 6 mm thick plywood veneered decorative face one side fixed with screws to timber surfaces including taking down old existing board complete all as specified and directed.

S&F in repairs, mineral fibre ceiling boards 16 mm thick 600 X 600 mm size including grid 25 X 25 X 1.6 mm thick GI powder coated angles 25 X 35 X 1.6 mm size ‘T’ section fixed with provn of suspenders from ceiling etc (Armstrong RH Dune 99) complete all as specified and directed.

M&L for French polishing on surfaces of any description with or girth incluidng cleaning and preparing the surface including a coat of wood filler on new untreated surfaces works with two or more coats till the surface smooth complete all as specified and directed.

Dismantling boarding any descriptin, fixed in any position with screws complete all as specified and directed.

S&F powder coated aluminium partition using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/6 mm thick frosted glass as directed by Engr-in-Charge including aluminium beading for fixing board (Make: GLASS Make MODI/ FLOAT/ ATUL) complete all as specified and directed.

S&F 18mm thick MDF board pre laminated both side fixed with aluminium screws as in storage cabinet/cub board incl all fittings fixtures and builder hardware etc all as directed by Engr-in-Charge, working station etc complete all as specified and directed.

Dismantling wrought or mild steel work of any description not otherwise provide for complete all as specified and directed.

S&F to Joist, channel, angle, or tee sections, confirming to Fe 410W gde 250 A quality fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including necessary form work of height upto 2 storey complete all as specified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F 4 mm dia galvanised steel wire, 100 X 100 mm mesh, made up into mattresses or cages, lapped, wired and laid in position including closing after filling complete all as specified and directed.

Dismantling wall & ceiling boards of any description as in panelling ceiling, partition, cup boards etc incl cover fillets in any surfaces complete all as specified and directed.

S&F prelaminated PVC rigid foam sheet wall panelling of 5 mm thick stuck on inner frame work of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the all using 65 mm long MS screws through the groove in the strip by using PVC fasters including necessary moulding work on doors, windows, pillers and opening etc complete all as specified and directed. Note:- (a) Work for fixing of wall panelling shall be got executed through manufacturers authorised applicators only under the close supervision of their technical staff. (b) The entire qty of wall panelling and their allied ancillaries shall be procured directly from the manufacturer or their authorised dealer only.

S&F in repairs ceiling boards 12 mm thick 600x600 mm thick (New Lutos 70) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, wall aprons etc laid bedded and pointed in any mortar including mortar screed of any description including removal of debris from site complete all as specified and directed.

M&L for 20 mm thick granite work (any type ) Black or any approved coloured (table rubbed and polished in step, jambs, pillers cooking plateform, floor and like in cement mortar (!:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed in CM 1:6 complete all as specified and directed.

S&F ZEBRA venetian blinds horizontal type incl guide rail, pulling thread etc incl taking down existing pelmets complete all as specified and directed.

M&L for preparation of old decorated surfaces by washing scrapping down of old painted surface of wall including cornices & applying one coat of cement base paint on wall complete all as specified and directed.

M&L for complete removal of old treatment on surfaces of walls through electrically operated grinder (wall sanding machine with internal dust extraction system) for preparation of old plastered surfaces of wall, complete all as specified and directed upto 10 mtr height including necessary steel scafolding upto 10 mtr height where required, complete all as specified and as directed by Engr-in-Charge.

M&L for applying one coat of 1.0mm thick trucare wall putty thorugh putty spray machine on old surface of wall to achieve even and smooth surface complete all as specified and as directed upto 10 mtr height incl necessary steel scafolding uto 10 mtr height where required complete all as specified and as directed by Engr-in-Charge.

M&L for applying one coat of oil bound distemper on walls (old decorated) including cornices complete all as specified and directed.

M&L for applying one coat of weather proof exterior emulsion extra premium 100% acrylic emulsion upto 10 M height incl necessary scafolding complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces by washing scrapping down and stopping of old painted surfaces of ceiling and apply one coat of white wash complete all as specified and directed.

All as per srl item No. 37.00 above but one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old painted wood or wood based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old painted steel and iron surface of any description not otherwise described over 10 cm width or girth and painting with one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old treated wooden surface and polishing melamine polish on the veneer and Burma teak wood including wood filler with two or more coats of polishing complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc. and removal of debris out side of Mod Land complete all as specified and directed.

M&L for 15mm thick Ready mix plaster on brick work or concrete surfaces of wall (Internal surface) finished even and smooth complete all as specified and as directed by Engr-in-Charge.

M&L for 5mm thick Ready mix plaster on concrete surfaces on ceiling finished even and smooth complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surface of ceiling and applying three coat of white wash complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m wide for foundation etc or for shaft, wells, cesspits, manhole, pair house etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth and getting out in any type of soil complete all as specified and directed.

Returning filling in including, spreading, leveling watering and well ramming in layer not exceeding 25cm in each layer complete all as specified and directed.

Removing excavated material not exceeding 50 M and depositing where directed at level not exceeding 1.5m above the starting pointing complete all as specified and directed.

Demolition and breaking up drain pipes 300mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes aftaer they are laid and tested in cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate for 300mm bore pipe, complete all as specified and as directed by Engr in charge.

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches of internal dia 300mm jointed in cement mortar and tested complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n.exc 15 cm in thickness below or above ground level & removing the rubbish out of MOD land complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radious built in cement mortar 1:6 old size bricks complete all as specified and directed.

M&L for brick work using except bricks (old retrived bricks from demolition shall be used) straight or curved on plan exc 6 m mean radious built in cement mortar 1:6 old size bricks complete all as specified and directed.

M&L for 15 mm thick rendering fair/unfair faces of brick work on concrete surfaces finishing even and smooth without using extra cement in CM 1:6 on walls complete all as specified and directed.

Demolition of RCC (reinforced, cut as required to facilitate demolition) of any description and in any position not otherwise specifically provide for as in manhole cover complete all as specified and directed.

S&F precast RCC 1:2:4 manhole covers slabs any size, thickness with 3 mm thick FI around cover slab complete all as specified Make PPRC, Polycrete incl reinforcement as per manufacturers design with frame complete all as specified and directed.

M&L for MS gusssets plates (plane or chequerred ) channel channel square cut or notched (ordinary or counter sunk ) forming holes, with out attachment grade Fe -410 W( Gde E-250 Quality A) complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paints over one coat of red oxide primer complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring complete all as specified and directed.

S&F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete including necessary double steel scaffolding where required upto two storey bldg complete all as specified and directed.

M&L for precast concrete drain cover slab 1:2:4 type B-1 using 20 mm graded stone agg and set in CM 1:4 complete all as specified and directed.

M&L for TMT bar 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. Note: (a) Srl Item No 02.00, 03.00, 05.00 to 07.00, 10.00, 13.00 to 16.00, 20.00, 21.00, 24.00, 27.00, 30.00, 32.00 to 36.00, 43.00 to 45.00, 51.00, 55.00, 59.00, 60.00, 62.00 to 64.00, 66.00 & 67.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody. (b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge.

R D ENTERPRISES (BID ID -3372295)

Shivam Firetech Engineers (BID ID -3372347)

B Kumar and Co (BID ID -3380436)

BEHAL TRADERS (BID ID -3380156)