8618 SPL REPAIR TO JCO MD ACCN T 16, BLDG NO 92 119 (ORS MD ACCN) AND PROVN OF 01 X TOILET WITH ATTACH BATHROOM AND PROVN OF ADDN/ ALTN OF SLIDING ALUMINIUM WINDOWS AT OLD NDA COMPLEX UNDER GE (CENTRAL) PUNE

Amount

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each with and including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc 1.50 Sqm but not exc 4 Sqm each with and including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed.

S&F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs,butt hinges, lock strike plate, etc complete all as specified and as directed.

-Ditto- all as item no 3.00 above but of size 105x60mm complete all as specified and as directed.

M&L for Cement concrete 1:3:6 type C1 using (20mm graded stone aggregates) for filling of pressed steel frame and hold fast block cutting etc complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core onstruction, with block board core and plywood face panels, commercial type on both sides, both face to be covered with decorative face veneer with lipping to match complete all as specified and as directed.

Supply and fixing( factory Made ) 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded both faces to be covered with decorative face venears with lipping fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length including minimum 06 Nos MS hold fast/lugs or SS dash fasteners complete as per direction of Engineer-in-Charge.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length including minimum 06 Nos MS hold fast/lugs or SS dash fasteners complete as per direction of Engineer-in-Charge.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges shall be paid separately)

All as per item no 10 above but wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly

S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary locking arrangement(Concealed lock) joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. (glass pane/ wire mess shall be paid saperately)

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 180 of SSR 2020 Part II complete all as specified and directed.

Dismantling aluminium section any description complete all as specified and directed.

S&F aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F anodised powder coated ventiator with louvers using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M complete all as specified and as directed.

Supply only 4.0mm sheet glass, ordinary quality complete all as specified and directed.

Supply only stainless steel wire 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to aluminium window / ventilator shutters / steel windows etc complete all as specified and directed

S&F stainless steel butt hinges 100mm, medium weight complete all as specified and directed.

S&F extruded aluminium alloy handles 150 mm long ISI Marked fabricated type anodised complete all as specified and directed.

S&F 150mm size ISI Mark aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long ISI Mark aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed.

S&F in repairs Curtain rod/drapery rod, 25mm dia, stainless steel with and including fency type stainless bracket 02 Nos for each opening and stainless steel end stopper fency type of required shape and size for each opening complete all as specified and directed.

S&F in repairs Door closer hydraulically regulated ISI Mark, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed Aluminium (extruded section body) complete all as specified and directed

S&F 250 mm long ISI Marked aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc.

M&L for preparation of new or previously untreated steel surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) un-reinforced cleaning the premises and removal of rubbish out side MD land complete all as specified and directed.

Demolition of brick work / Stone masonary / PCC block masonary build in cement morter of any description and removing of rubbish out side MD land complete all as specified and directed.

M&L for precast concrete solid block masonry exc 10cm width with solid block of PCC (1:5:8) Gde D-5 and setting in CM 1:6 complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish out side MD land complete all as specified and directed.

M&L for 75mm thick (1:3:6) Type-C2 (using 40mm graded crushed stone aggregate) as in plinth protection / path finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for plain cement concrete (1:4:8) Type-D2 (using 40mm graded crushed stone aggregate) as in foundation filling or mass concrete, levelling course / sub base of flooring complete all as specified and directed.

M & L for non skid ceramic coloured tiles 600X600x7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 20mm thick screed bed of CM 1:6 complete all as specified and directed.

.Ditto as per item no 34 but in skirting over and including 10mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 300X 450X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of CM 1:3 complete all as specified.

M & L for Non - skid ceramic coloured tiles,size 300x300x 7 mm thick laid on floor , over and including 15mm thick screed bed in cement mortar 1:6 and pointed in white cement with pigment to match the shade of the tiles, complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc including removal of debrise outside MD land complete all as specified and directed.

M&L for 20mm thick granite (of any type) work table rubbed and pre polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite complete and ensure best adhesion to surface including rounding to exposed edges complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick for kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified

M&L for 20 to 25mm thick machine cut Kota stone flooring laid and jointed with grey cement slurrry mixed with pigments to match the shade of the stone including rubbing and polishing over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

-ditto - as per item no-41 but kota stone in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete all as specified and directed.

M&L for rubber moulded glossy chequered cement concrete coloured tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for water proofing treatment to RCC roof slab,walls,chajjas etc,shall be carried out as specified below and as directed by Engr-in-charge (a) Removing of existing old bitumenous tarfelt (water proofing treatment) including cement screed bed and clean the surface with wire brush and washing with water to achieve the original surface of slab. (b) M&L for 10mm thick plaster bscreed bed layer in CM 1:3 on concrete surfaces mixed with WPC @ 3% by weight of Cement. (c) Preparing plastered surfaces of roof slab,walls, chajjas etc by brooming with broom sweeping free from dirt dust etc and applying one coat of oil based cold bituminius primer @ 0.40 ltr per Sqm of area complete all as specified . (d) Laying APP polymer modified approved membrane ,non woven,polyster,weighing not less than 3.5Kg /Sqm and 3mm thick with side laps and over laps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engr -in-charge .Carring out test by flooding water for 24 hrs for leekage and seepage and rectifying the same to the entire satisfaction of GE. (e) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15ltr/Sqm on the top of membrane complete all as specified and directed by Engr-in-Charge.

Taking down Cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, any description including removal of debrise outside MD land complete all as specified and directed.

M&L rendering 15mm thick on stone masonary/PCC block/Brick masonry surfaces other than fair faces of surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick /stone/ PCC block surfaces finished even and smooth without using extra cement complete all as specifiwd as directed.

M&L for dubbing out average 10mm thick in CM 1:6 on irregular face of walls (when specifically ordered in writing) complete all as specifiwd as directed.

All as item No 50 above but 10mm thick in CM 1:3 as in ceiling inclusive of fixing GI wire netting 0.90mm dia and 12mm mesh complete all as specified and directed

M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for preparation newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over a thin layer of wall care putty complete all as specified and directed.

Complete removal of existing treatment of old decorated surface of wall including brooming down and cleaning the surface and applying two coat of cement base paint of approved tint all as specified and directed.

Complete removal of existing treatment of old decorated surface of walls including brooming down and cleaning the surfaces and applying two coat of distemper (Oil emulsion) over over a thin layer of wall care putty all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified as directed.

M&L for 8 mm thick one side laminated gypsum ceiling board designer type for false ceiling on GI powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.50 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 2.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, complete all as specifed and direceted.

M & L for 12mm thick Seamless calcium silicate ceiling made of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish with and including Gl frame work size of grid (605 mm x 605 mm) direction of Engr-in-charge as per site reqmt seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with and incl thin layer of putty with gypsum binder, sanding the sufrace till smooth surface is obtained and applying two coats of oil bound distemper over a coat of primer complete all as specified.

Dismantling asbestose cement (Corrugated or semi corrugated etc) sheets in roof covering complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness in roof covering or wall cladding complete all as specified.

Dismantling of single layer manglore pattern tiles and ridge in roofing complete all as specified and directed.

Dismantling of battens for tiles, shingles etc, of any size and description spaced exc 15cm including tilting fillets complete all as specified and as directed.

Dismantling timber scantling of size 40 Sqcm and over in section as in unframed work complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa with AZ Grade 150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa with AZ Grade 150 as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws complete all as specified and directed.

M&L for MS structural steel work framed as in trusses, purlins,rafters post etc conforming to grade E-250 (Fe-410W quality "A") including shaped washers including necessary clits required length,notching,drilling ,reveting and or welding of connecting with nut bolts with angle ,cleat,fish plat,gusset plate and also erecting in true position complete all as specified and directed.

Taking up or down 15mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls & surface of roof slab with and including making good to required surfaces by using white cement complete all as specified and directed.

S&F 20 mm dia steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as reqd and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed.

Dismantling water tank of capacity exceeding 500 liters but not excedding 1000 Ltrs complete all as specified and directed.

Dismantling water tank of capacity not exceeding 500 liters complete all as specified and directed.

S&F rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

M&L for PVC water tank rotational molded polyethylene water storage tank hoisted & fixed in position (with closed top) of capacity 1000 ltr complete all as specified and directed.

Supply and fixed in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.

S&F in repairs vitreous china single piece pedestal pattern water closet white 'P' or 'S' trap, matching sheet cover and connection to trap . including making good to floor, complete all as specified. Make Jaquar cat part no: CNS-WHT-851 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of cement concrete bedding & making good to floor complete all as specified and directed including taking out old one.

S&F in repairs 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as reqd complete all as specified and directed.

S&F in repairs 15mm bore chromium plated bib cock fancy type. Make Jaquar cat part no:FLR-CHR-5047N or equivalent model in KOHLER and ROCA.

S&F in repairs 15mm bore chromium plated angle cock fancy type.Make Jaquar cat part no:FLR-CHR-5053N or equivalent model in KOHLER and ROCA.

S&F in repairs Brass CP wall mixer 3-in-1 for mixing hot & cold water with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange and fixed.Make Jaquar cat part no:FLR-CHR-5281N or equivalent model in KOHLER and ROCA.

S&F in repairs brass chromium plated overhead shower 100mm round shape single flow with rubit cleaining system fitted to steel pipe or union complete.Make Jaquar cat part no:OHS-CHR-1989 or equivalent model in KOHLER and ROCA.

S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed.

S&F in repairs 15mm bore chromium plated pillar cock fancy type.Make Jaquar cat part no:FLR-CHR-5015 or equivalent model in KOHLER and ROCA.

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and wall hook including making connections and fixed in position complete all as specified. Make Jaquar cat part no:ALD-CHR-577 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 10cm wide with chromium plated bracket guard and railing 60cm long.Make Jaquar cat part no:CAN-CHR-1171 N or Techno commercial equivalent model in KOHLER and ROCA.

Supply and fixed in repairs 20mm bore PVC brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as directed

Supply and fixed in repairs 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete

S&F in repairs vitreous china wash hand basin, white, flat back of size 560mm x 415mm with & including a pair of pre-painted cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore PTMT waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified. Make Jaquar cat part no:CNS -WHT-801 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs chromium plated soap dish approximate size 120x 120x28mm complete all as specified and directed.Make Jaquar cat part no:AKP-CHR-35731P or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs tubular towel rail, 20mm dia, D type, 60cm longv between flanges Make Jaquar cat part no:AKP-CHR-35711PS or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs 2-way Bib cock with flange Make Jaquar cat part no:FLR-CHR-5041N or Techno commercial equivalent model in KOHLER and ROCA.

S&F Stainless Steel Kitchen rack (Overall size 24x24x10”) complete all as specified and directed. Make : Cat No. P-310 of Prayag or Techno commercial equivalent model in Blue Star / Nirali complete all as specified and as directed.

S&F in repairs 100 mm dia chromium plated grating dooms with or without holes complete all as specified and as directed.

Dismantling cast iron work of any de scription and in any position

S& F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specifed and directed.

.ditto- all as item no-100 but 75mm bore complete all as specified and directed.

S&F 110mm PVC (SWR) bands fixed to PVC pipe complete all as specified and directed.

S&F 75mm PVC (SWR)bands fixed to PVC pipe complete all as specified and directed.

S&F PVC(SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed.

S&F PVC (SWR) cowl 75/100 mm dia complete all as specifed and directed.

S&F 110mm bore PVC (SWR) junction double,(double T).equal or unequal with access door complete.

S&F PVC (SWR) gully trap 150 x 100 square or round mouthed, type P incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4)complete all as specified and directed.

M&L for providing, cement concrete 1:2:4 type B-I (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including eathering, slightly rounded or chamfered angles and throating, complete all as specifed and directed.

Demolition/Breaking up Drain Pipes (SGSW), AC/RCC 150 mm to 200 mm dia, Jointed in Cement Mortar of any description including demolition of PCC of the Pipes with Bed, complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced cement concrete pipe 200 mm dia class NP2 laid and jointed complete with collars as in sewar lines and jointed complete all as specified and as directed by Engr-in-charge.

M&L for Cement Concrete (1:3:6) Type C1 (20mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 200 mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, benching, bed block for rungs, window cills etc complete all as specified and directed by Engr-in-charge

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified

M&L for TMT bar 8mm dia and over as in stirupps complete all as specified.

M&L for cement concrete type B1 1:2:4 (using 20mm graded stone aggregates) in precast cover slabs for manholes cover and similar articles with plain faces etc set in cement mortar 1:4 including use and waste of formwork complete

M&L for Providing precast cement concrete louvres and jallies,Type B0 1:2:4 (12.5mm ) graded aggregate in CM 1:6, 25mm thick (mea sured solid), including all mould- ings complete all as specified.

S&F 18/19 mm thick prelaminated Medium density fibre board, exterior grade, fixed to timber framework with screws prelaminated one side with decorative choice and other side white lamination fixed with screws as in cup board shutters & shelves and pelmet boxes etc all as directed.

S&F 100 mm long,designer pattern ss handles for fixing in cupboards all as directed and as specified by Engr-in Charge

S&F ,Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specifed and directed.

S&F telescopic drawer channel 19" long complete all as specified and directed by Engr in charge

S&F in repairs 50mm dia, polished, hard wood knobs fixed with screws complete all as specifed and directed.

S&F contineous (piano) hinges, mild steel bright finish of 40 mm width of flaps(when open) complete all as specified.

S&F Locks, drawer, grade I, size 50 mm complete all as specifed and directed.

Earth work in excavation over areas in any type of soil (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in charge

M&L for TMT bar 10mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specifed and directed.

Use and waste formwork to rough finished flat surfaces of footing and plinth beams complete all as specifed and directed.

Use and waste formwork to rough finished flat surfaces of pillars, posts, struts, piers, columns and stanchions etc complete all as specifed and directed.

M&L for reinforced cement concrete M-20 nominal mix type A1 1:1.5:3 (using 20mm graded aggregate) for foundations, including rafts, footings, plinth beams, bases for columns, etc complete all as specified and as directed.

M&L for reinforced cement concrete nominal mix M-20 type A-1, 1:1.5:3 (using 20mm graded aggregate) for columns, pillars, piers, posts and struts etc complete all as specified and as directed.

M&L for reinforced cement concrete nominal mix type M-20 type B-1, 1:2:4 (20 mm graded aggregate) for roof beams and lintelscomplete all as specified and directed.

M&L for Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

S&F 15mm bore chromium plated fancy type concealed stop cock with body. Make Jaguar Cat Part No-ALD-CHR-089FT and equivalent in Roca and Kohler Complete all as specified and directed.

SF brass chromium plated waste coupling 32mm dia for urinal and wash hand basin etc complete

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 146 of SSR 2004 part 11. The width of stiles and rails shall be as specified in para 8B.2.1 on page 134 of SSR 2004 part II.

Cutting openings, through brick walls / concrete portion built in cement for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete and making good portion with PCC 1:2:4 type B-2 (using 20mm graded aggregates) including use and waste of formwork etc complete

Taking down of existing Ceilling fan / Exhaust fan of any size and sweep and keeping safe custody and refixing the same existing place with serviceable condition by minor repairs such as capacitor replacement, bearing repalcement and painting, clamping of fan rod to roof iron channel, required down rod, complete as per site requirement complete all as specified and as directed. Note : The quoted rate shall include the rates of spares and rewinding of fan mentioned above.

M&L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked in PVC casing caping 25mm wide ISI marked including all accessories etc. with PVC modular boxes/PVC Sunken Boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following:- Note:- The quoted rate shall include circut wiring of any length & taking down of copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc Making good of disturbed surfaces will be done by contractor without any extra claims.

One light point controlled by one switch complete all as specified and directed.

Two light point controlled by one switch

One fan point controlled by one 5 Amps one way modular switch and modular regulator complete all as specified and directed.

One Exhaust fan point controlled by one 5 Amps one way modular switch complete all as specified and directed.

One call bell point controlled by push bottom.

One 5/6 Amp socket controlled by one switch same board complete all as specified.

One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

All as per item no. 137 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed multistranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated multistranded copper conductor 2.5 Sqmm single core cable for earth continuity conductor for one 3 pin 5/15 Amps switch socket / Earth plug socket independent and connecting to common earth dolly complete all as specified.

Supply and fix in replacement LED building security light 30 W IP 65 pressure die cast aluminium housing with GI bracket of suitable size complete including clamps , screws etc and dia complete all as specified and directed

S&F modular switch single pole one way 5/6 Amps including connection complete all as specified and as directed

S&F modular socket out let 5/ 6 Amps 3 pin incl connection complete all as specified and as directed

S&F modular bell push type single pole one way 5/6 amps incl connection complete all as specified and as directed

S&F of modular rotating step type electronic fan regulator, 100W /240 volts two module incl connection complete all as specified and as directed

S&F of modular socket twin type, 5 pin 6/16 Amps flush type incl connection complete all as specified and as directed

S&F modular switch type single pole one way 15/16 amps incl connection complete all as specified and as directed

S&F of multi music call bell incl connection complete all as specified and as directed

S&F ceiling rose, surface, three terminals incl connection complete all as specified and as directed.

Supply and fixing in replacement round shape 15 watt 220 volts AC recessed type metal base design with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing LED tube lights 4 feet fitting 1x 20W, 220V, Ac aluminium housing body connecting up with flexible copper conductor cable of suitable size from ceilingrose complete.

Supply and fixing LED light fitting 2 feet, 10 watt 220 V AC including connecting up with flexible copper conductor cable of suitable size complete

S&F Sub main wiring with 2 runs of single core, 6 sqmm PVC insulated, unsheathed, 1100 volts grade multi-stranded, copper conductor cables (FRLS quality) drawn through PVC conduit medium grade 25mm with fitting/accessories, fixed on roof, walls, ceiling etc including 6 Sqmm PVC insulated, unsheathed, single core, multistranded, copper conductor as earth continuity wire complete as specified and directed. Note : Rate includes (i) PVC conduit and its accessories (ii) Two runs of cable and one run of earth wire of size 6 sqmm and including taking down of old U/S submain

S&F in replacement of MCB SPN DB 8 way IP-43 powder painted with bus bar 100A, neutral link, earth bar and Din rail ,230 Volts with double door including taking down old unsv DB and making the surface good to match with adjucent complete all as specified and as directed

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl galvanised iron wire 4mm as earthing lead and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover , watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete.

Supply and fixing in replacement rating 240V, 10KA c curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

SP 5 To 32 AMP

SPN 32 AMP

Supply, laying and testing cable in replacement XLPE Insulated , galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 2 core

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of LT UG cable/poles etc in soft/loose soil and getting out complete all as specified.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point for any type of excavation.

M&L for laying of DWC pipe of 50 mm dia for cable complete all as specified and directed.

M & L for Cutting of road/hard standing and making good with PCC (1:2:4) using 20mm graded stone aggregate complete all as specified.

M&L for CONCEALED point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked duly drawn through PVC conduit concealed in wall / floor/ceiling along with suitable fittings and conduits of appropriate size as per specification as required at site and as directed of medium duty ISI marked including all accessories etc. with MS termination boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. ISI marked and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following:- Note:- The rate shall deemed to be include the circuit wiring cutting chasing and making good to disturbed surfaces complete

One light point controlled by one switch complete all as specified and directed.

One fan/exhaust point controlled by one switch complete all as specified and directed.

One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

All as per item no. 161 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed multistranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated multistranded copper conductor 2.5 Sqmm single core cable for earth continuity conductor drawn through PVC conduit for one 3 pin 5/15 Amps switch socket / Earth plug socket independent and connecting to common earth dolly complete all as specified

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, IP 55/56 including suitable bracket complete with fitting all as specified and direcred.

M & L for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS H cable for phase and neutral with one single core 6 sqmm continuous copper earth conductor and including PVC conduit medium duty incl accessories complete concealed in wall / ceiling all as specified. Note:-3 runs of 6 Sqmm conductor and one run of PVC conduit min 25mm dia shall be measured as one unit RM length.

S&F of MCB SPN DB 8 way IP-43 with 100A bus bar, neutral link, earth bar and Din rail ,230 Volts with double door, concealed in wall and making the surface good to match with adjucent complete all as specified and as directed

Supply and fixing 240V, 10KA C curve miniature circuit breaker (MCB) of following capacities in the MCB DB complete with connection testing and commissioning:-

SP 6 to 32 A

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm complete including cutting of wall if necessary to fit the fan as specified and directed

Supply, install, Testing and Commissioning Electric water heater storage (Geysers) , Shock resistant , ABS outer body, steel / glass lined , inner tank PUF insulated and efficient long life copper heating element, white colour, tank design is suitable to withstand minimum 6 bar pressure and of capacity 25 Litre, BEE 5 star rated complete with including all accessories such as safety valve, thermostat, Heating element, NRV etc complete all as specified and directed . Note:-The quoted rate shall include heavy duty Super high tensile stainless steel hose pipe with brass ferrule fitting for 'HOT' and 'COLD' water connections with all fittings complete

Supply and fix geyser box moudular type consists of sunken box with MCB 20A , plug top with indication complete all as specified and directed. Note : The quoted rate shall include necessary cutting chasing and making good to disturbed surface complete

Agarwal Agencies (BID ID -3452778)

KANT INFRA (BID ID -3452351)