Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹54.7 CrAccepted-AOC MD22 ELDECO MENSIONZ SOHNA ROAD NEAR FAZILPUR CHOCK GURGAON FF 19 OMAXE GURGAON MALL SOHNA ROAD GURUGRAM 2021R5777 | GURUGRAM | GURUGRAM | HARYANA | ₹54.7 Cr | L-1 | Accepted-AOC Awarded |
| 2 | L-2₹56.0 CrRejected-Finance 81 ARYA NAGAR ASSANDH ROAD PANIPAT HARYANA 132103 | PANIPAT | HARYANA | 132103 | ₹56.0 Cr | L-2 | Rejected-Finance Rejected |
| 3 | L-3₹55.9 CrRejected-Finance | ₹55.9 Cr | L-3 | Rejected-Finance Rejected |
| 4 | L-4₹61.9 CrRejected-Finance 858 SECTOR 23 127021 | BHIWANI | HARYANA | 127021 | ₹61.9 Cr | L-4 | Rejected-Finance Rejected |
| 5 | L-5₹62.7 CrRejected-Finance | ₹62.7 Cr | L-5 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | TIRUPATI CEMENT PRODUCTS L1 | Bansal Construction Co, Gurgaon L3 | M/S SHREE BALAJI BUILDERS L4 | M/s K. R. ANAND L7 | Ram Narain Jain Contractor L2 | Jainco Buildcon Private Limited L5 | SHREE HARI INFRAPROJECTS PRIVATE LIMITED L6 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Shifting of Pipe line above 300 mm Dia From the site of Dismantling to WTP Basai Store including loading, unloading and carriage etc. complete in all respect. | 4,480 | Metre | 145 ₹6.5 L | 200 ₹9.0 L | 157 ₹7.0 L | 200 ₹9.0 L | 100 ₹4.5 L | 2,439.02 ₹1.1 Cr | 150 ₹6.7 L |
| 2.00 | Providing and Laying 1400 mm dia i/d with 20 mm thickness MS Pipe with inner and outer coatings as per RDSO Guidlines BS 105 Para 1.3.5 for crossing 1000 mm i/d carrier pipeline through trenchless technology by pipe jacking to make Railway crossing i/c maintain level with equipment such as JCB, Crane, pipe jacking machine etc. including cutting, welding and jointing of pipes etc complete in all respect as per direction of Engineer-in-charge. | 70 | Metre | 60,000 ₹42 L | 66,000 ₹46.2 L | 63,265 ₹44.3 L | 1,70,000 ₹1.2 Cr | 67,500 ₹47.3 L | 70,642.1 ₹49.4 L | 91,000 ₹63.7 L |
| 3.00 | Providing and Laying 1200 mm dia i/d with 16 mm thickness MS Pipe with inner and outer coatings as per RDSO Guidlines BS 105 Para 1.3.5 for crossing 900 mm i/d carrier pipeline through trenchless technology by pipe jackinng to make Railway crossing i/c maintain level with equipment such as JCB, Crane, pipe jacking machine etc. including cutting, welding and jointing of pipes etc complete in all respect as per direction of Engineer-in-charge. | 70 | Metre | 40,000 ₹28 L | 48,250 ₹33.8 L | 43,785 ₹30.6 L | 1,40,000 ₹98 L | 48,500 ₹34.0 L | 54,240 ₹38.0 L | 70,000 ₹49 L |
| 4.00 | Providing stringing out, jointing, cutting, and testing of Spirally welded 1600 M.S. pipe manufacturers such as SAIL/Jindal/TATA/Welspun/RINL/SKS/PSL (P) Ltd and MAAN Indutries made up of 15mm thick M.S. plate as per IS 2062 and lS Code 3589-2001 (latest ammendment) with internal lining of 25 mm thick cement mortar 1:2 with soluble chloride-ion (CI) content of the cement mortar mix shall not exceed 0.15 percent, expressed as a percentage of cement weight and chemically cured epoxy coating outside of min. thickness 0.275 mm and laying the same including, jointing , cutting,welding of the pipe etc. all material, labour, TandP/equipments as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge | 2,305 | Metre | 50,100 ₹11.5 Cr | 57,000 ₹13.1 Cr | 56,995 ₹13.1 Cr | 70,000 ₹16.1 Cr | 52,900 ₹12.2 Cr | 51,646.64 ₹11.9 Cr | 55,000 ₹12.7 Cr |
| 5.00 | Providing stringing out, jointing, cutting, and testing of Spirally welded 1400 M.S. pipe manufacturers such as SAIL/Jindal/TATA/Welspun/RINL/SKS/PSL (P) Ltd and MAAN Indutries amde up of 15mm thick M.S. plate as per IS 2062 and lS Code 3589-2001 (latest ammendment) with internal lining of of 25 mm thick cement mortar 1:2 with soluble chloride-ion (CI) content of the cement mortar mix shall not exceed 0.15 percent, expressed as a percentage of cement weight and chemically cured epoxy coating outside of min. thickness 0.275 mm and laying the same including, jointing , cutting,welding of the pipe etc. all material, labour, TandP/equipments as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge | 6,058.5 | Metre | 44,900 ₹27.2 Cr | 50,000 ₹30.3 Cr | 50,190 ₹30.4 Cr | 65,000 ₹39.4 Cr | 46,500 ₹28.2 Cr | 46,074.83 ₹27.9 Cr | 48,000 ₹29.1 Cr |
| 6.00 | Providing and Laying 2000 mm dia i/d with 14 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipment JCB, Crane, pipe jacking machine all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge. | 49 | Metre | 58,500 ₹28.7 L | 75,000 ₹36.8 L | 61,950 ₹30.4 L | 2,00,000 ₹98 L | 70,000 ₹34.3 L | 75,785.18 ₹37.1 L | 97,700 ₹47.9 L |
| 7.00 | Providing and Laying 1800 mm dia i/d with 12 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipment JCB, Crane,pipe jacking machine .all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge. | 194 | Metre | 46,000 ₹89.2 L | 63,000 ₹1.2 Cr | 48,720 ₹94.5 L | 1,80,000 ₹3.5 Cr | 58,000 ₹1.1 Cr | 53,095.88 ₹1.0 Cr | 81,000 ₹1.6 Cr |
| 8.00 | Providing and Laying 1500 mm dia i/d with 12 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipment JCB ,Crane,pipe jacking machine .all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge. | 60 | Metre | 38,500 ₹23.1 L | 64,000 ₹38.4 L | 40,950 ₹24.6 L | 1,50,000 ₹90 L | 49,000 ₹29.4 L | 46,146.75 ₹27.7 L | 71,000 ₹42.6 L |
| 9.00 | Providing and Laying 1200 mm dia i/d with 12 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipment JCB ,Crane,pipe jacking machine .all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge. | 185 | Metre | 31,000 ₹57.4 L | 42,795 ₹79.2 L | 32,655 ₹60.4 L | 1,20,000 ₹2.2 Cr | 40,000 ₹74 L | 38,433.32 ₹71.1 L | 59,500 ₹1.1 Cr |
| 10.00 | Providing and Laying 900 mm dia i/d with 12 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipment JCB ,Crane,pipe jacking machine .all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge. | 294 | Metre | 30,000 ₹88.2 L | 35,808 ₹1.1 Cr | 24,465 ₹71.9 L | 90,000 ₹2.6 Cr | 34,000 ₹100.0 L | 28,889.31 ₹84.9 L | 45,600 ₹1.3 Cr |
Updated dates
Tender Value
₹58.9 Cr
EMD Value
₹1.2 Cr
Closing Date
25 Nov 2025, 5:00 pmClosed
ABHINAV VERMA
Division - Water Supply
Laying of master water supply lines for Tail End area
2025_HRY_478772_1
2025A458D344 8DC8 42C6 975F 89B3CA17EA94717001
Open Tender
Civil Works
550 days
Gurugram
2 documents required · 2 mandatory
₹1,180
₹1.2 Cr
Yes
6th Floor Plot No. 3 Sector 44 Gurugram
11 May 2026
17 Oct 2025
26 Nov 2025
17 Oct 2025
25 Nov 2025
17 Oct 2025
24 Oct 2025
Amount
Shifting of Pipe line above 300 mm Dia From the site of Dismantling to WTP Basai Store including loading, unloading and carriage etc. complete in all respect.
Providing and Laying 1400 mm dia i/d with 20 mm thickness MS Pipe with inner and outer coatings as per RDSO Guidlines BS 105 Para 1.3.5 for crossing 1000 mm i/d carrier pipeline through trenchless technology by pipe jacking to make Railway crossing i/c maintain level with equipment such as JCB, Crane, pipe jacking machine etc. including cutting, welding and jointing of pipes etc complete in all respect as per direction of Engineer-in-charge.
Providing and Laying 1200 mm dia i/d with 16 mm thickness MS Pipe with inner and outer coatings as per RDSO Guidlines BS 105 Para 1.3.5 for crossing 900 mm i/d carrier pipeline through trenchless technology by pipe jackinng to make Railway crossing i/c maintain level with equipment such as JCB, Crane, pipe jacking machine etc. including cutting, welding and jointing of pipes etc complete in all respect as per direction of Engineer-in-charge.
Providing stringing out, jointing, cutting, and testing of Spirally welded 1600 M.S. pipe manufacturers such as SAIL/Jindal/TATA/Welspun/RINL/SKS/PSL (P) Ltd and MAAN Indutries made up of 15mm thick M.S. plate as per IS 2062 and lS Code 3589-2001 (latest ammendment) with internal lining of 25 mm thick cement mortar 1:2 with soluble chloride-ion (CI) content of the cement mortar mix shall not exceed 0.15 percent, expressed as a percentage of cement weight and chemically cured epoxy coating outside of min. thickness 0.275 mm and laying the same including, jointing , cutting,welding of the pipe etc. all material, labour, TandP/equipments as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge
Providing stringing out, jointing, cutting, and testing of Spirally welded 1400 M.S. pipe manufacturers such as SAIL/Jindal/TATA/Welspun/RINL/SKS/PSL (P) Ltd and MAAN Indutries amde up of 15mm thick M.S. plate as per IS 2062 and lS Code 3589-2001 (latest ammendment) with internal lining of of 25 mm thick cement mortar 1:2 with soluble chloride-ion (CI) content of the cement mortar mix shall not exceed 0.15 percent, expressed as a percentage of cement weight and chemically cured epoxy coating outside of min. thickness 0.275 mm and laying the same including, jointing , cutting,welding of the pipe etc. all material, labour, TandP/equipments as per requirement complete in all respect as per direction and satisfaction of Engineer-in-Charge
Providing and Laying 2000 mm dia i/d with 14 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipment JCB, Crane, pipe jacking machine all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge.
Providing and Laying 1800 mm dia i/d with 12 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipment JCB, Crane,pipe jacking machine .all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge.
Providing and Laying 1500 mm dia i/d with 12 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipment JCB ,Crane,pipe jacking machine .all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge.
Providing and Laying 1200 mm dia i/d with 12 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipment JCB ,Crane,pipe jacking machine .all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge.
Providing and Laying 900 mm dia i/d with 12 mm thickness MS Pipe through trenchless technology by pipe jackinng to cross carriage way i/c maintain level with equipment JCB ,Crane,pipe jacking machine .all material including welding, cutting of pipes etc. All material and labour as per requirment complete in all respect as per direction of Engineer-in-charge.
Providing and fixing of M.S specials as per relevent IS code with latest revision IS marked complete in all respect as per direction of Engineer-in-charge.
Supply, installing, testing and commissioning of 1600 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge
Supply, installing, testing and commissioning of 1400 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge
Supply, installing, testing and commissioning of 1100 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge
Supply, installing, testing and commissioning of 900 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge
Supply, installing, testing and commissioning of 600 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge
Supply, installing, testing and commissioning of 400 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge
Supply, installing, testing and commissioning of 300 mm i/d remote operated DI DF Double Eccentric Short Body Butterly Valves WITH Actuator per IS: 13095 / BSEN 593 (BS: 5155) Body : SGI IS 1865 Gr 400/15: Disc: SGI IS 1865 Gr 400/15: Shaft (Drive/Stub) : SS AIS 431, Disc Seal Retainer: SS AISI 304: Body Seat (Integral): Monel 60 Nir Cr Alloy: Disc Seal - EPDM: Cotter Pin: SS AISI 304: Fasteners (Internal/ External) : SS AISI :304/ CS (CL 4.0/4.6) , Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manual/ Electric Actuator(AUMA/ROTORK/Schneider/Honeywell/Emerson) with integral starter complete in all respect as per site requirement IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge
Supply, installing, testing and commissioning of 1600 mm i/d DI DF Metal Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: DI IS 1865 Gr 400/15: Wedge:DI IS 1865 Gr 400/15: Body and Wedge Rings: Bronze IS: 318 Gr LTB2 Spindle: SS AISI 410, Fasteners: CS, Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manaual/ Electric Actuator (AUMA/ROTORK/PNEUTORK/MARSH PNEUMATIC/ELOMATIC) make with integral Starter complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge.
Supply, installing, testing and commissioning of 1400 mm i/d DI DF Metal Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: DI IS 1865 Gr 400/15: Wedge:DI IS 1865 Gr 400/15: Body and Wedge Rings: Bronze IS: 318 Gr LTB2 Spindle: SS AISI 410, Fasteners: CS, Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manaual/ Electric Actuator (AUMA/ROTORK/PNEUTORK/MARSH PNEUMATIC/ELOMATIC) make with integral Starter complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge.
Supply, installing, testing and commissioning of 1200 mm i/d DI DF Metal Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: DI IS 1865 Gr 400/15: Wedge:DI IS 1865 Gr 400/15: Body and Wedge Rings: Bronze IS: 318 Gr LTB2 Spindle: SS AISI 410, Fasteners: CS, Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manaual/ Electric Actuator (AUMA/ROTORK/PNEUTORK/MARSH PNEUMATIC/ELOMATIC) make with integral Starter complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge.
Supply, installing, testing and commissioning of 1000 mm i/d DI DF Metal Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: DI IS 1865 Gr 400/15: Wedge:DI IS 1865 Gr 400/15: Body and Wedge Rings: Bronze IS: 318 Gr LTB2 Spindle: SS AISI 410, Fasteners: CS, Flange Drilling: IS 1538 Table 486 with RTU: Operation - Manaual/ Electric Actuator (AUMA/ROTORK/PNEUTORK/MARSH PNEUMATIC/ELOMATIC) make with integral Starter complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskar with obtaining electric connection from DHBVN complete in all respect to the satisfaction of Engineer-in-charge.
Supply, installing, testing and commissioning of 600 mm i/d DI DF Resilient Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: SGI IS 1865 Gr 400/15: 1865 Gr 400/15 plus EPDM Encapsulated: Spindle: SS AISI 420, Fasteners : CS , Flange Drilling: IS 1538 Table 4 Manually operated complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskar
Supply, installing, testing and commissioning of 500 mm i/d DI DF Resilient Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: SGI IS 1865 Gr 400/15: 1865 Gr 400/15 plus EPDM Encapsulated: Spindle: SS AISI 420, Fasteners : CS , Flange Drilling: IS 1538 Table 4 Manually operated complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskar
Supply, installing, testing and commissioning of 400 mm i/d DI DF Resilient Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: SGI IS 1865 Gr 400/15: 1865 Gr 400/15 plus EPDM Encapsulated: Spindle: SS AISI 420, Fasteners : CS , Flange Drilling: IS 1538 Table 4 Manually operated complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskar
Supply, installing, testing and commissioning of 350 mm i/d DI DF Resilient Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: SGI IS 1865 Gr 400/15: 1865 Gr 400/15 plus EPDM Encapsulated: Spindle: SS AISI 420, Fasteners : CS , Flange Drilling: IS 1538 Table 4 Manually operated complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskar
Supply, installing, testing and commissioning of 300 mm i/d DI DF Resilient Seated Non Rising Spindle Sluice Valve as per IS: 14846: Body Dome: SGI IS 1865 Gr 400/15: 1865 Gr 400/15 plus EPDM Encapsulated: Spindle: SS AISI 420, Fasteners : CS , Flange Drilling: IS 1538 Table 4 Manually operated complete in all respect as per site requirement of make IVC Nasik, VAG, AVK, Talis, Kirloskar
Making connection in running water supply line and 900-1600 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including lifting and shifting of items using crane, Dewatering, welding, gas cutting, Concrete breaker, DG charges and all other charges as per site requirement complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately)
Making connection in running water supply line and 1400-1100 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including lifting and shifting of items using crane, Dewatering, welding, gas cutting, Concrete breaker, DG charges and all other charges as per site requirement complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately)
Making connection in running water supply line and 900-700 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including lifting and shifting of items using crane, Dewatering, welding, gas cutting, Concrete breaker, DG charges and all other charges as per site requirement complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately)
Making connection in running water supply line and 900-600 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including lifting and shifting of items using crane, Dewatering, welding, gas cutting, Concrete breaker, DG charges and all other charges as per site requirement complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately)
Making connection in running water supply line and 900-300 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including lifting and shifting of items using crane, Dewatering, welding, gas cutting, Concrete breaker, DG charges and all other charges as per site requirement complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately)
Making connection in running water supply line and 1000-400 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including lifting and shifting of items using crane, Dewatering, welding, gas cutting, Concrete breaker, DG charges and all other charges as per site requirement complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately)
Making connection in running water supply line and 600-600 mm i/d CI/DI/MS-CI/DI/MS using Specials and Mechanical Joint Collar including lifting and shifting of items using crane, Dewatering, welding, gas cutting, Concrete breaker, DG charges and all other charges as per site requirement complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately)
Making connection in running water supply line and 600-(100 to 500 mm i/d) CI/DI/MS-CI/DI/MS, placing of sluice valve with actuator on connection line using Specials and Mechanical Joint Collar including lifting and shifting of items using crane, Dewatering, welding, gas cutting, Concrete breaker, DG charges and all other charges as per site requirement complete in all respect with satisfaction of Engineer in charge. (Cost of Specials and MJ Collar will paid separately)
Labour rate for Stringing, Jointing cutting making connection with existing line at both ends and testing of M.S pipe from WTP Basai including welding, cutting of pipes etc and labour as per requirment complete in all respect as per direction of Engineer-in-charge , Including transportation from WTP to work site, loading/unloading etc complete in all respect. 1600 mm i/d Pipe
Providing and fixing of 900 mm i/d Ductile Iron Mechanical joint collar as Per IS : 9523, ISI Mark on site where required to the complete satisfaction of Engineer-in-charge.
Providing and fixing of 700 mm i/d Ductile Iron Mechanical joint collar as Per IS : 9523, ISI Mark on site where required to the complete satisfaction of Engineer-in-charge.
Providing and fixing of 500 mm i/d Ductile Iron Mechanical joint collar as Per IS : 9523, ISI Mark on site where required to the complete satisfaction of Engineer-in-charge.
Providing and fixing of 400 mm i/d Ductile Iron Mechanical joint collar as Per IS : 9523, ISI Mark on site where required to the complete satisfaction of Engineer-in-charge.
Providing and fixing of 300 mm i/d Ductile Iron Mechanical joint collar as Per IS : 9523, ISI Mark on site where required to the complete satisfaction of Engineer-in-charge.
Providing of 250 micron to 1.5 mm polythene sheet of minimum 1000 gauge @228 gm/sqm minimum weight
Supply, Installation, testing and commissioning of Pressure Transmitter and interface with RTU with necessary mounting arrangements including cables and transmission of data to SCADA and ICCC
Supply, Installation, testing and commissioning of Insertion type flow meter( for buried applications ) as per detailed specifications given in tender documents. Scope of work also included for required dewatering / usage of any crane/chain pulley etc Diameter between 400 mm i/d to 1600 mm i/d
Supply, Installation, testing and commissioning of Armoured Copper cable of 4 x 1.5 Sq mm
Supply, Installation, testing and commissioning of Armoured Copper cable of 2 x 1.5 Sq mm
Supply, Installation, testing and commissioning of Flexible Copper cable of 6 x 2.5 Sq mm
Supply, Installation, testing and commissioning of Flexible Copper cable of 4 x 1.5 Sq mm
Supply, Installation, testing and commissioning of 700 mm Full bore insertion type flow meter (for buried applications ) as per detailed specifications given in tender documents. Scope of work also included for required dewatering / usage of any crane/chain pulley etc
Supply, Installation, testing and commissioning of 600 mm Full bore insertion type flow meter (for buried applications ) as per detailed specifications given in tender documents. Scope of work also included for required dewatering / usage of any crane/chain pulley etc
Supply, Installation, testing and commissioning of 500 mm Full bore insertion type flow meter (for buried applications ) as per detailed specifications given in tender documents. Scope of work also included for required dewatering / usage of any crane/chain pulley etc
Supply, Installation, testing and commissioning of 400 mm Full bore insertion type flow meter (for buried applications ) as per detailed specifications given in tender documents. Scope of work also included for required dewatering / usage of any crane/chain pulley etc
SITC of SS Braided hose( min 12mm ID) for connecting Pressure Transmitters
Supply, Installation, Testing and commisioning of water utility information management system on premises including data base management software with trained manpower including 1 time service cost year after completion of the work. (All work to be done as per scope mentioned in DNIT)
Manning and operation of the Water supply information management system with trained manpower 5 years after defect liability period as per Scope of work mentioned under DNIT.
Bidder Name
Amount
TIRUPATI CEMENT PRODUCTS (GSTN-06AACFT2702L1ZB) BID ID -1362478
Bansal Construction Co, Gurgaon (GSTN-06AAFFB1840G1ZW) BID ID -1363506
M/S SHREE BALAJI BUILDERS (GSTN-NA) BID ID -1366174
M/s K. R. ANAND (GSTN-06AADPA9956E1ZT) BID ID -1369381
Ram Narain Jain Contractor (GSTN-06ACLPJ0885F1ZK) BID ID -1374015
Jainco Buildcon Private Limited (GSTN-NA) BID ID -1364864
SHREE HARI INFRAPROJECTS PRIVATE LIMITED (GSTN-NA) BID ID -1373719
Ram Narain Jain Contractor (BID ID -1374015)
Jainco Buildcon Private Limited (BID ID -1364864)
SHREE HARI INFRAPROJECTS PRIVATE LIMITED (BID ID -1373719)
M/S SHREE BALAJI BUILDERS (BID ID -1366174)
Bansal Construction Co, Gurgaon (BID ID -1363506)
M/s K. R. ANAND (BID ID -1369381)
Ram Narain Jain Contractor (BID ID -1374015)
TIRUPATI CEMENT PRODUCTS (BID ID -1362478)
M/S SHREE BALAJI BUILDERS (BID ID -1366174)
M/s K. R. ANAND (BID ID -1369381)
SHREE HARI INFRAPROJECTS PRIVATE LIMITED (BID ID -1373719)
Jainco Buildcon Private Limited (BID ID -1364864)
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.86 MB
BOQ_556731.xls
BOQ • 0.40 MB
3D16HWZ138127.pdf
Additional Documents • 9.42 MB
OT0138127.pdf
Other Document • 0.74 MB
Download all tender documents and submit your bid