PROVN OF MEZZANINE FLOOR IN COMMUNITY HALL VVRA AND SPECIAL REPAIRS TO MS RAILING OF STAIRCASE AND BALCONIES AT 07 RESIDENTIAL BLOCKS AND COMMON AREAS AT VVRA SECUNDERABAD

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard and dense soil and removing excavted material outside MOD land complete all as specified and as directed.

Material and labour providing cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete etc all as specified and as directed.

Material and labour providing reinforced Cement Concrete Type B1, 1:2:4 using (20mm graded curshed stone aggregate) as in foundations, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed.

Material and labour providing reinforced Cement Concrete Type B1, 1:2:4 using (20mm graded curshed stone aggregate) as in beams, bands and lintels over 1.5m span, cantilevers etc complete all as specified and as directed.

Material and labour providing reinforced Cement Concrete Type B1, 1:2:4 using (20mm graded curshed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

Material and labour providing reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, waste slab, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour providing reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, copings, parapets and railings upto 60 cm in height, chajjas and the like including form work complete all as specified and as directed.

Material and labour for use & waste of form work to sides of concrete foundations, footings, bases of columns, and similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified and as directed

Material and labour for use & waste of form work to sides of pillars, posts, struts, piers, columns (Square or rectangular) and stanchions. for rough finished surfaces of concrete, complete all as specified and as directed

Material and labour for use & waste of form work to sides and soffits of floor and roof beams, lintels, cantilevers etc, for rough finished surfaces of concrete, complete all as specified and as directed

Material and labour for use & waste of form work to soffits of suspended slabs such as roof slab,floor slab for rough finished surfaces of concrete complete all as specified and as directed.

Supply and fixing Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and as directed.

Supply and fixing Mild steel TMT bars 5 dia and over upto and including 10 mm dia, as in stirrups spacers links etc quality conforming to TMT bars complete all as specified and as directed.

M&L brick work with FLY ASH old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified.

Cutting openings, through brick walls built cement mortar for door, windows and other openings or enlargimg existing openings. Converting window into door openings, etc. or cutting uot defective brick work for under-painting, including providing, fixing and removing shoring, etc and removing rubbish exc 1.5km but nexc 5.00 km outside MOD permises. complete all as specified and directed.

Forming jambs, etc. to openings €9to foregoing items), including cutting, toothing and propertly bonding into old work, also facing, jointing and pointing to match exising work, complete in CM 1:6 complete all as specified and directed.

S&F 12mm thick Toughened frosted/tinted glass doors both sides swing with self locking floor spring suitable for glass door fitted with necessary fixing arrangements with wall and stainless steel pivot complete in all respect as specified & directed. Make : Modiguard/ saint Gobain

Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.and removing debris outside MOD premises complete all as specified and directed

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in cement mortar 1:3 and finished even and smooth without using extra cement.

M&L for Preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls over a coat of wall putty to make surfaces smooth.

M&L for Preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of ceiling over a coat of wall putty to make surfaces smooth.

M&L for Preparing newly plastered surfaces and applying two coats of applying two coats of Apex ultima exterior emulsion paint on walls over and including priming coat of exterior primer all as specifid and directed by Engr-in-Chrge.

M&L for complete removal of existing treatment and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls over a coat of wall putty to make surfaces smooth.

M&L for complete removal of existing treatment from external surfaces of walls/ ceiling, washing with water and applying two coats of Apex ultima exterior emulsion paint as per manufacturers instructions over a coat of true care exterior wall primer and wipe it clean complete all as specified and as directed. Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC (DULUX)

M&L for Non- skid coloured ceramic joint free tiles of any design and pattern, 7 to 8 mm thick (square/rectangular) area of each tile exe 0.18 sqm but not exe 0.38, in floor etc incl 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed.

All as per sr item No. 26 above but on vertical surfaces such as a skirtings (Skriting is to be flush with walls) over and including 10 mm thick rendering in CM 1:4 on fair face of brick/Concrete surface as backing coat for tiles complete all as specified and directed.

Supply & fixing of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature complete all as specified.

Supply & fixing of UPVC windows/ventilators with top hung shutters made out of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, with peg stay of suitable size to keep hung shutter in open postion, with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass complete all as specified.

M&L for Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M&L Prepration of new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified.

S&F Multicolor fiber roller blinds water resistant, UV protection, transperant, black out sutable for window etc fixed complete all as directed. Make : Vista/Levandor/Amar

S&F Stainless steel railing of spiral staircase made out of 304 grade steel with following specifications : (a) Stainless steel hand rail of 50mm dia including bending as per site requirement,welding and polishing complete (b) Stainless steel cross bars three nos 20mm dia fixed parallel to hand rail with balusters by welding.The ends of cross bars fixed with round bar spherical end cap including welding and polishing complete. (c) Stainless steel balusters of 900mm height and 38mm diameter pipes fixed at 90cm c/c. incl welding and polishing etc as required at site to fix in position complete. (d) Stainless steel newel post 75mm dia with spherical cap fixed at starting point of railing incl necessary welding and polishing etc as required at site to fix in position complete.

M&L for 10 mm thick tinted toughned glass coverd with brown tinted film fixed as in partition with aluminium angle frame of size 35x27mm and fixed to walls using 80 mm long UPVC fastener and joints filled with silicon complete all as specified and directed.

S&F Stainless steel door lock suitable for glass door of thickness 10-12mm fixed in floors complete with necessary arrangements complete all as speicified and directed.. Make : Godrej/Ozone

S&F Stainless steel door handle 450mm long for toughened glass door including necessary holes in glass complete all as speicified and directed.

M&L for point wiring complete with 1.5 Sqmm PVC insulated unsheathed single core multi standard copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed in walls/Ceiling and Terminated to sunken box of modular type including modular frame white cover plates suitable for fixing switches, sockets etc including 1.5 Sqmm PVC insulated Copper conductor cable as earth continuity conductor and connecting to common earth dolly and taking down old one complete all as specified and directed for the following:-

a) One light/fan/bell point controlled by one way modular switch 6 Amps

b) One 3 pin 5 Amps switch socket outlet point on independent board

c) One 3 pin socket outlet 5 Amps on the same board with other switches.

All as per item No-37 above but with 2.5 Sqmm PVC insulated unsheathed 1100 V grade single core multi standard copper conductor cable for 3/6 pin socket outlet 15 Amps on one independant board.

All as per item No-37 above but with 4 Sqmm PVC insulated unsheathed 1100 V grade single core multi standard copper conductor cable for 3/6 pin socket outlet 15 Amps on one independant board.

S&F modular switch one way 6 amps 1 module all as specified.

S&F modular socket 2 module for 2/3 pin 6 amps all as specified.

S&F modular switch one way 16 amps 1 module all as specified.

S&F modular socket 2 in 1 , 3 pin 6 and 16 Amps complete all as specified.

S&F ceiling rose PVC /polycorbonate isolated body three terminal with base plate ISI marked complete all as specified and directed.

S&F modular fan step type regulator 120w complete all as specified and directed.

S & F Ceiling fan 230V 50 Hz 1200mm sweep 5 star rated energy saver including taking down old unserviceable ceiling fan complete and depositing old ceiling fan in MES store all as specified and directed..

S & F LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption <=20W, luminaire lumen >2000 lm, system efficiency of > 100 lumens/W, LED Make : Nichia/ Cree/ Everlite / Eclison/ Osram/ Lumiled, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class 1, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 45 degree C, driver efficiency>85%, power factor > 0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L7O criteria, multi stage isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level < 60 V DC as per IEC standard with LM70 & LM 80 certification including taking down old unserviceable light fitting of any description complete all as specified and directed. Make:- Wipro Model No. LL20-281-XXX-65AL1 or Havells Cat Part No. ENDURALINEARNEOBU20WLED8765SPCWH / technocomercially equivalent model of Philips/Bajaj / Shakthi fixtures

S & F LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption <=10W, luminaire lumen >1000 lm, system efficiency of > 100 lumens/W, LED Make : Nichia/ Cree/ Everlite / Eclison/ Osram/ Lumiled, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class 1, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 45 degree C, driver efficiency>85%, power factor > 0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L7O criteria, multi stage isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level < 60 V DC as per IEC standard with LM70 & LM 80 certification including taking down old unserviceable fitting of any description complete all as specified and directed. Make:- Wipro Model No. LL20-111-XXX-65-NE or Havells Cat Part No. ENDURALINEARNEOBU10WLED8765SPCWH / technocomercially equivalent model of Philips/Bajaj / Shakthi fixtures

Supply and laying 40 mm bore GI tubing light grade in trenches for protection of cable at road crossing including taking out old unserviceable pipe complete all as directed.

S&F SPN sheet metal encloser 240V with with two pin and earth plug and socket with one single pole MCB 20 Amps complete all as specified and directed.

M&L for distribution board made of sheet metal TPN 4 way with 200 Amps rated bus bar with metal door including taking down unserviceable distribution board complete all as directed by Engineer-in-Charge.

M&L for MCB TPN 63 Amps 415 volt,C' curve,10KA including taking down unserviceable MCB complete all as directed by Engineer-in-Charge.

M&L for MCB SPN 40 Amps 240 volt,C' curve,10KA including taking down unserviceable MCB complete all as directed by Engineer-in-Charge.

M&L for MCB SP 06 to 32 Amps 240 volt,C' curve,10KA including taking down unserviceable MCB complete all as directed by Engineer-in-Charge.

M&L for sub main wiring with two runs of single core PVC insulated unsheathed cable 4 sqmm (nominal area) 1100 volts grade multistranded HRFR copper conductor with one run of 2.5 sqmm PVC insulated unsheathed multistranded single core copper conductor 1100 V grade and connecting to common earth drawn through and including PVC concealed conduit medium grade ISI mark not less than 25mm outer dia complete and accessories of suitbale size as required. Note : Two runs of 4 sqmm & one run of 2.5 sqmm cable and one run of conduit shall be measured and paid as one length.

S&F Electronic voltage stabilizer of 5 KVA capacity (suitable for wall mounted) for automatic operation, indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5% including taking down unserviceable stabilizer complete all as directed. Make - V-GUARD / KEELINE / BLUE GUARD

Supply, install, testing and commissioning of split type air conditioner 1.5 TR capacity inverter type 5 star rated single phase,230 volts complete with all accessories as provided by the manufacturer such as indoor, outdoor uints refregerant copper tubing insulation packing meterials and water out let pipe to be brought out side and electrical cop[per power cable PVC insulated multistranded sheathed 3 core of adequate size and lenght, and metal stand / PCC base as per site condition shall be provided and any additional refregerant pipe line and cable shall be provided for functioning of unit complete all as directed. Make : Dakin Model No- JTKJTV50TV or Hitachi Model No- RSOG518HCEA or Equivalent in Voltas / Blue star

S&F full glow, (4 ft) luminaire, glare free and provision of cable from ceiling rose to light fitting including taking down unserviceable light fitting complete all as directed. Make :- Philips model No. RC380B LED32S-6500 L120W 30 PSU OD or techno equivalent in WIPRO / HAVELLS / Shakthi fixtures

Supply and laying LT UG Cable , XLPE insulated armoured heavy duty electric cable with aluminium conductor , 1100 Volts grade 25 Sqmm 4 core including taking out old unserviceable cable complete all as directed. Make : HAVELLS/UNIVERSAL/NICCO/GLOSTER

S&F Stainless steel railing made out of 304 grade steel with following specifications : (a) Stainless steel hand rail of 50mm dia including bending at turns,welding and polishing and fixing with walls using dash fasteners as per site requirements etc complete (b) Stainless steel cross bars three nos 20mm dia fixed parallel to hand rail with balusters by welding.The ends of cross bars fixed with round bar spherical end cap including welding and polishing complete. (c) Stainless steel balusters of 900mm height and 38mm diameter pipes fixed at 90cm c/c.One end welded with hand rail and other fixed with step using anchorage clamps and dash fasteners etc as required at site to fix in position complete. (d) Stainless steel newel post 75mm dia with spherical cap fixed at starting point of railing.Newel post shall be fixed with brackets and dash fasteners etc complete (e) Taking down old mild steel railing and making good the disturbed surfaces matching with existing flooring. Note : Work shall be carried out upto 4 storeyed Building

S&F Stainless steel railing made out of 304 grade steel with following specifications : (a) Stainless steel hand rail of 50mm square pipe including bending at turns,welding, polishing and fixing with walls using dash fasteners as per site requirements etc complete (b) Stainless steel cross bars three nos 20mm square pipe fixed parallel to hand rail with balusters by welding and polishing complete. (c) Stainless steel balusters of 800mm height and 38mm square pipes fixed at 90cm c/c.One end welded with hand rail and other fixed with walls using anchorage clamps and dash fasteners etc as required at site to fix in position complete. (d) Taking down old mild steel railing and making good the disturbed surfaces matching with existing flooring. Note : Work shall be carried out upto 4 storeyed Building

S&F Stainless steel gate made out of 304 grade steel square pipes incl SS sliding bolt 200 mm long, SS hinges 100mm long and SS latch suitable for opening and closing of gate incl dismantling old MS gate complete all as specified and directed.

M.R.ENTERPRISES

M/S PAVANI ENTERPRISES

VACON INFRASTRUCTURES