Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance S 17 77 1 CHARAN NAGAR COLONY NADESAR VARANASI UTTAR PRADESH PIN 221002 | VARANASI | UTTAR PRADESH | 221002 | Admitted-Finance |
| 2 | Admitted-Finance A 3 257 JANAKPURI NEW DELHI 110058 | WEST DELHI | DELHI | 110058 | Admitted-Finance |
| 3 | Admitted-Finance 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | Admitted-Finance |
| 4 | Admitted-Finance N A | NEW DELHI | DELHI | 110001 | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹99,960
Closing Date
17 Jul 2021, 6:00 pmClosed
GE E/M BASE HOSPITAL DELHI CANTT
GE E/M BASE HOSPITAL DELHI CANTT-110010
PERIODICAL MAINTENANCE WITH SERVICING OF DG SETS ALONG WITH SPARE PARTS LT CABLE AND OTHER MISC E/M WORKS AT BASE HOSPITAL UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10
2021_MES_454393_1
GE/BH-23/2021-22
Open Tender
Electrical and Maintenance Works
Item Rate
330 days
GE E/M BASE HOSPITAL DELHI CANTT
Class D Category b(i)
7 documents required · 7 mandatory
₹500
GE E/M BASE HOSPITAL DELHI CANTT
₹99,960
Yes
23 Jul 2021
25 Jun 2021
19 Jul 2021
25 Jun 2021
17 Jul 2021
10 Jul 2021
Amount
Repair, preventive and periodical maintenance, testing and commisioning of DG Set 200/166 KVA (Engine Make- Cummins Model No 6BTA5-9G) installed at ICU and X Ray in Base Hospital including servicing and replacement of unserviceable parts etc complete all as specified and as directed. Notes: (i) Spare parts shall be measured and paid sepretaly as "Supply only" under respective item of this Schedule. (ii) Coolant and Lub oil shall be measured and paid separately under relevant item of this schedule.
Supply only in replacement following Spare parts of DG Set 200/166 KVA (Engine Make- Cummins Model No 6BTA5-9G) installed at ICU and X Ray in Base Hospital complete all as specified and as directed:-
Td Piston + G Pin + Circlips Cat part No 84099114
Cylinder Liner Cat part No 840099999
Pistion ring set cat part No 84099913
Head Valve cone cat part No 84099990
Head Gasket
Liner O ring
Turbo Charger Kit
PT Pump
Injector Pump Calibration
Fuel filter Cat part No - AX1005678
Element oil by pass filter Cat part No - 3873576
Filter Lub Oil Cat Part No - AX1006061
Hose plane Cat Part No - 63495
Clamp Hose Cat Part No - 43828
Kit injector Cat Part No - NT 743
Cup injector Cat Part No - 312536
Hose flexible Cat Part No - AK8065MS
Hose flexible Cat Part No - AK10065MS
Hose flexible Cat Part No - AK10075SS
Hose flexible Cat Part No - AK6065SS
Gasket valve cover Cat Part No - 108692
Belt Cat Part No - 178570
Control Safety (H.W.T) Cat Part No - 194504
Control Safety (H.W.T) Cat Part No - 194505
Air element cleaner (inner) Cat Part No - AX1006304
Fan belt Cat Part No- 134809
Hose plane Cat Part No - 67185
Cable flexible drive Cat Part No - 503473
Control vernier Cat Part No - 3229310
Repair, preventive and periodical maintenance, testing and commisioning of DG Set 320 KVA (Make : Crompton Greaves) installed at Truama and main Power House Sub Station in Base Hospital including servicing and replacement of unserviceable parts etc complete all as specified and as directed. Notes: (i) Spare parts shall be measured and paid sepretaly as "Supply only" under respective item of this Schedule. (ii) Coolant and Lub oil shall be measured and paid separately under relevant item of this schedule.
Supply only in replacement following Spare parts of DG Set 320 KVA (Make : Crompton Greaves) installed at Truama and main Power House Sub Station in Base Hospital complete all as specified and as directed:-
Td Piston + G Pin +Circlips Cat part No 84098114
Cylinder Liner Cat part No 840099999
Pistion ring set cat part No 84099813
Head Valve Inlet cat part No 84099899
Head Gasket
Head Valve Exhaust
Liner O ring
Pump Nozzle Repairing
Turbo Charger repairing
Turbo Charger Kit
Fuel filter Cat part No - AX1005678
Element oil by pass filter Cat part No - 3873576
Filter Lub Oil Cat Part No - AX1006061
Hose plane Cat Part No - 63495
Clamp Hose Cat Part No - 43828
Gasket valve cover Cat Part No - 108692
Belt Cat Part No - 178570
Air element cleaner (outer) Cat Part No - AX1006303
Air element cleaner (inner) Cat Part No - AX1006304
Fan belt Cat Part No- 134809
Hose plane Cat Part No - 67185
Gear fly wheel ring Cat Part No - 5566
Repair, preventive and periodical maintenance, testing and commisioning of DG Set 40 KVA /62.5 KVA (Make : Kirloskar, Engine Make- Kirloskar Model No RB-44) installed at Base Hospital including servicing and replacement of unserviceable parts etc complete all as specified and as directed. Notes: (i) Spare parts shall be measured and paid sepretaly as "Supply only" under respective item of this Schedule. (ii) Coolant and Lub oil shall be measured and paid separately under relevant item of this schedule.
Supply only in replacement following Spare parts of DG Set 40 KVA /62.5 KVA (Make : Kirloskar, Engine Make- Kirloskar Model No RB-44) installed at Base Hospital complete all as specified and as directed:-
Td Piston + G Pin +Circlips Cat part No 84098114
Cylinder Liner Cat part No 840099999
Pistion ring set cat part No 84099813
Head Valve Inlet cat part No 84099899
Head Gasket
Head Valve Exhaust
Liner O ring
Packing Kit
Fuel filter element Cat part No - 3026712000
Fuel return pipe Cat part No - 2922708000
Hose Cat part No - 2925003000
Clamp Cat part No - 2924222000
Air filter element Cat part No - 2924205000
Set of copper washer Cat part No - 4408730000
Fuel pipe Cat part No - 0210202000
Fuel pump mounted stop solenoid Cat part No - 0265002000
Set of joints Cat part No - 0306811000
Gear ring stater Cat part No - K4002016000
Repair, preventive and periodical maintenance, testing and commisioning of DG Set 110 KVA Make : Cummins installed at ICU Sub Stn for Dental Centre in Base Hospital including servicing and replacement of unserviceable parts etc complete all as specified and as directed. Notes: (i) Spare parts shall be measured and paid sepretaly as "Supply only" under respective item of this Schedule. (ii) Coolant and Lub oil shall be measured and paid separately under relevant item of this schedule.
Supply only in replacement following Spare parts of DG Set 110 KVA Make : Cummins installed at ICU Sub Stn for Dental Centre in Base Hospital complete all as specified and as directed:-
Kit fuel filter and rings Cat Part No - 3238493
Element Lub oil Cat Part No - 3238204
Element oil filter cat part No-3166556
Belt Cat Part No - 178570
Fan belt Cat Part No - 134809
Element air cleaner (outer) Cat Part No - AX1006301
Element air cleaner (iner) Cat Part No - AX1006302
Hose flexible Cat Part No - AX8065MS
Hose plane Cat Part No - 505062
Hose flexible Cat Part No - AK5045SS
Hose flexible Cat Part No - AK6065SS
Gasket valve cover Cat Part No - 108692
Cup injector Cat Part No - 3012537
Hose plane Cat Part No - 67185
Hose plane Cat Part No - 63495
Repair, preventive and periodical maintenance, testing and commisioning of DG Set 500 KVA Make : Greaves installed at OT Sub Stn for OT Complex in Base Hospital including servicing and replacement of unserviceable parts etc complete all as specified and as directed. Notes: (i) Spare parts shall be measured and paid sepretaly as "Supply only" under respective item of this Schedule. (ii) Coolant and Lub oil shall be measured and paid separately under relevant item of this schedule.
Supply only in replacement following Spare parts of DG Set 500 KVA Make : Greaves installed at OT Sub Stn for OT Complex in Base Hospital complete all as specified and as directed:-
Kit fuel filter and rings Cat Part No - 3238493
Air Filter
Element Lub oil Cat Part No - 3238204
Element oil filter cat part no-3166556
Belt Cat Part No - 178570
Fan belt Cat Part No - 134809
Element air cleaner (outer) Cat Part No - AX1006301
Element air cleaner (iiner) Cat Part No - AX1006302
Hose flexible Cat Part No - AX8065MS
Repair, preventive and periodical maintenance, testing and commisioning of DG Set 320 KVA Make : Greaves installed at X ray Substation in Base Hospital including servicing and replacement of unserviceable parts etc complete all as specified and as directed. Notes: (i) Spare parts shall be measured and paid sepretaly as "Supply only" under respective item of this Schedule. (ii) Coolant and Lub oil shall be measured and paid separately under relevant item of this schedule.
Supply only in replacement following Spare parts of DG Set 320 KVA Make : Greaves installed at X ray Substation in Base Hospital complete all as specified and as directed:-
Kit fuel filter and rings Cat Part No - 3238493
Air Filter
Element Lub oil Cat Part No - 3238204
Element oil filter Cat Part No-3166556
Belt Cat Part No - 178570
Fan belt Cat Part No - 134809
Element air cleaner (outer) Cat Part No - AX1006301
Element air cleaner (iner) Cat Part No - AX1006302
Hose flexible Cat Part No - AX8065MS
Repair, preventive and periodical maintenance, testing and commisioning of DG Set 160 KVA Make : Cotton Greaves installed at X Ray Sub Stn, Main Lab, Covid ICU in Base Hospital including servicing and replacement of unserviceable parts etc complete all as specified and as directed. Notes: (i) Spare parts shall be measured and paid sepretaly as "Supply only" under respective item of this Schedule. (ii) Coolant and Lub oil shall be measured and paid separately under relevant item of this schedule.
Supply only in replacement following Spare parts of DG Set 160 KVA Make : Cotton Greaves installed at X Ray Sub Stn, Main Lab, Covid ICU in Base Hospital complete all as specified and as directed:-
Kit fuel filter and rings Cat Part No - 3238493
Air Filter
Element Lub oil Cat Part No - 3238204
Element oil filter Cat Part No-3166556
Belt Cat Part No - 178570
Fan belt Cat Part No - 134809
Element air cleaner (outer) Cat Part No - AX1006301
Element air cleaner (iner) Cat Part No - AX1006302
Hose flexible Cat Part No - AX8065MS
Repair, preventive and periodical maintenance, testing and commisioning of DG Set 200KVA Make : Cotton Greaves installed at GE Centre, Covid ICU, Ortho I & II in Base Hospital including servicing and replacement of unserviceable parts etc complete all as specified and as directed. Notes: (i) Spare parts shall be measured and paid sepretaly as "Supply only" under respective item of this Schedule. (ii) Coolant and Lub oil shall be measured and paid separately under relevant item of this schedule.
Supply only in replacement following Spare parts of DG Set 200KVA Make : Cotton Greaves installed at GE Centre, Covid ICU, Ortho I&II in Base Hospital complete all as specified and as directed:-
Kit fuel filter and rings Cat Part No - 3238493
Air Filter
Element Lub oil Cat Part No - 3238204
Element oil filter cat part no-3166556
Belt Cat Part No - 178570
Fan belt Cat Part No - 134809
Element air cleaner (outer) Cat Part No - AX1006301
Element air cleaner (iiner) Cat Part No - AX1006302
Hose flexible Cat Part No - AX8065MS
Repair, preventive and periodical maintenance, testing and commisioning of DG Set 62.5 KVA Make :Cotton Greaves installed at Main Power House,ICU Substation, Morchary in Base Hospital including servicing and replacement of unserviceable parts etc complete all as specified and as directed. Notes: (i) Spare parts shall be measured and paid sepretaly as "Supply only" under respective item of this Schedule. (ii) Coolant and Lub oil shall be measured and paid separately under relevant item of this schedule.
Supply only in replacement following Spare parts of DG Set 62.5 KVA Make: Cotton Greaves installed at Main Power House, ICU Substation, Morchary in Base Hospital complete all as specified and as directed:-
Kit fuel filter and rings Cat Part No - 3238493
Air Filter
Element Lub oil Cat Part No - 3238204
Element oil filter cat part No-3166556
Belt Cat Part No - 178570
Fan belt Cat Part No - 134809
Element air cleaner (outer) Cat Part No - AX1006301
Element air cleaner (iiner) Cat Part No - AX1006302
Hose flexible Cat Part No - AX8065MS
Supply only inhibitor corrosion (Coolant) green/red suitable for DG Sets 40 KVA to 320 KVA capacity, of make Cummins, Kirloskar and Crompton Greaves complete all as specified and as directed. Make - Servo/ IOC/ HP/ Castrol/ Valvoline/ BP.
Supply only Lub oil 20W/40 multigrade, suitable for DG Sets 40 KVA to 320 KVA capacity, of make Cummins, Kirloskar and Crompton Greaves complete all as specified and as directed. Make - Servo/ IOC/ HP/ Castrol/ Valvoline/ BP.
M&L taking down the radiator and descaling the same of following capacities of DG Sets internally by circulating chemicals including soldering the copper tubes and tank leakages complete all as specified and as diected.
DG Sets 500/320/200/110/166 KVA
DG Sets 63/40 KVA
S&F in replacement fuse base suitable for cylindrical/DIN type HRC/HBC fuse link type 630/400 A for AMF panel for DG Sets of following capacities complete all as specified and as diected :-
DG Set 500/320/310 KVA
DG Set 160/166/200 KVA
DG Set 62.5/40 KVA
S&F in repalcement of power contactor series MNX/MCX -3 pole, AC control suitable for AMF panel of DG Sets of following capacity complete all as specified and as diected:-
S&F in repair 800 Amp Fuse Switch units, fitted with sturdy side operating handle which drives the quick make break mechanism incorporating operating springs. Liberal sized silver plated terminals, suitable for aluminium cable/bus-bar termination, provided with terminal cover shields to prevent any accidental contact with live metal parts. Positive ON-OFF indication is provided on the switch door, Contacts made out of electrolytic copper, electro-plated with silver, for better contact and greater resistance to corrosion, Specially designed female contacts ensure low contact resistance and better arc-control. Fuse switches designed for use with HBC Cartridge fuse links conforming to IS:13703. The enclosure shall be made out of sheet steel, rust protected, phosphatised and powder coated, duly fitted with removable top and bottom end plates, provided with knock- outs for bus bars/cables entry, front accessible door, fitted with dust-excluding gasket, interlocked to prevent opening when the switch is in ‘ON’ condition, suitable for surface mounting complete all as specified and as directed. Make- Havells Cat No IHFNTW4800 or equivalent model of SCHINDER/ SEIMENS/ Legrand/ L&T.
S&F in repair 200Amp Fuse Switch units, fitted with sturdy side operating handle which drives the quick make break mechanism incorporating operating springs. Liberal sized silver plated terminals, suitable for aluminium cable/bus-bar termination, provided with terminal cover shields to prevent any accidental contact with live metal parts. Positive ON-OFF indication is provided on the switch door, Contacts made out of electrolytic copper, electro-plated with silver, for better contact and greater resistance to corrosion, Specially designed female contacts ensure low contact resistance and better arc-control. Fuse switches designed for use with HBC Cartridge fuse links conforming to IS:13703. The enclosure shall be made out of sheet steel, rust protected, phosphatised and powder coated, duly fitted with removable top and bottom end plates, provided with knock- outs for bus bars/cables entry, front accessible door, fitted with dust-excluding gasket, interlocked to prevent opening when the switch is in ‘ON’ condition, suitable for surface mounting complete all as specified and as directed. Make- Havells Cat No IHFNTW4800 or equivalent model of SCHINDER/ SEIMENS/ Legrand/ L&T.
S&F in repair 100Amp Fuse Switch units, fitted with sturdy side operating handle which drives the quick make break mechanism incorporating operating springs. Liberal sized silver plated terminals, suitable for aluminium cable/bus-bar termination, provided with terminal cover shields to prevent any accidental contact with live metal parts. Positive ON-OFF indication is provided on the switch door, Contacts made out of electrolytic copper, electro-plated with silver, for better contact and greater resistance to corrosion, Specially designed female contacts ensure low contact resistance and better arc-control. Fuse switches designed for use with HBC Cartridge fuse links conforming to IS:13703. The enclosure shall be made out of sheet steel, rust protected, phosphatised and powder coated, duly fitted with removable top and bottom end plates, provided with knock- outs for bus bars/cables entry, front accessible door, fitted with dust-excluding gasket, interlocked to prevent opening when the switch is in ‘ON’ condition, suitable for surface mounting complete all as specified and as directed. Make- Havells Cat No IHFNTW4800 or equivalent model of SCHINDER/ SEIMENS/ Legrand/ L&T.
S&F in repair 200 Amp Bus bar chamber, 4 way, wall mounted, of size 400X300X150 mm, fabricated using sheet steel (CRCA) and epoxy powder coated to give superior & lasting finish, bus bar sections shall be made out of ETP grade copper & dull tin plated, bus bar supports shall be made out of DMC (Dough moulding compound), Left & Right side end plates shall be detachable complete all as specified and as directed. Make- Havells Cat No IHFNTW4800 or equivalent model of SCHINDER/ SEIMENS/ Legrand/ L&T.
S&F in repair 400 Amp Bus bar chamber, 4 way, wall mounted, of size 400X300X150 mm, fabricated using sheet steel (CRCA) and epoxy powder coated to give superior & lasting finish, bus bar sections shall be made out of ETP grade copper & dull tin plated, bus bar supports shall be made out of DMC (Dough moulding compound), Left & Right side end plates shall be detachable complete all as specified and as directed. Make- Havells Cat No IHFNTW4800 or equivalent model of SCHINDER/ SEIMENS/ Legrand/ L&T.
S&F in repair On load change over switch, 320 Amp, capacity, 4 pole, with MS Enclosure, made of 3.15 mm thick steel sheet and extensible handle mounting stand, made from 35 x 35 x 5 mm thick channel, floor mounted and fixing in ground and necessary mounting accessories complete all as specified and as directed. Make- Havells Cat No IHFNTW4800 or equivalent model of SCHINDER/ SEIMENS/ Legrand/ L&T.
S&F in repair On load change over switch, 400 Amp, capacity, 4 pole, with MS Enclosure, made of 3.15 mm thick steel sheet and extensible handle mounting stand, made from 35 x 35 x 5 mm thick channel, floor mounted and fixing in ground and necessary mounting accessories complete all as specified and as directed. Make- Havells Cat No IHFNTW4800 or equivalent model of SCHINDER/ SEIMENS/ Legrand/ L&T.
S&F in repair On load change over switch, 630 Amp, capacity, 4 pole, with MS Enclosure, made of 3.15 mm thick steel sheet and extensible handle mounting stand, made from 35 x 35 x 5 mm thick channel, floor mounted and fixing in ground and necessary mounting accessories complete all as specified and as directed. Make- Havells Cat No IHFNTW4800 or equivalent model of SCHINDER/ SEIMENS/ Legrand/ L&T.
S&F in repair On load change over switch, 250 Amp capacity, 4 pole with MS Encluser, made of 3.15 mm thick steel sheet Enclosure and extensible handle mounting stand made from 35 x 35 x 5mm thick channel, floor mounted and fixing in ground and necessary mounting accessories complete all as specified and as directed. Make- Havells Cat No IHFNTW4800 or equivalent model of SCHINDER/ SEIMENS/ Legrand/ L&T.
S & F cable jointing kit for 11 KV (earthed) grade cable for Straight through joint termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm complete all as specified and as directed.
S & F cable jointing kit for 1.1 KV (earthed) grade cable for Straight through joint termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 70 to 95 Sqmm complete all as specified and as directed.
S & F cable jointing kit for 1.1 KV (earthed) grade cable for Straight through joint termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 150 to 185 Sqmm complete all as specified and as directed.
S & F cable jointing kit for 1.1 KV (earthed) grade cable for Straight through joint termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 240 to 300 Sqmm complete all as specified and as directed.
S & F in replacement 250 Amp MCCB TP, 25 KA adjustable thermal setting 0.8-1.0x IN thermal release 80-100 (A) necessary copper cable for & flexible PVC conduit for internal connection for distribution complete all as specified and as directed. Make- Havells Cat Part No IHLAN30250 or equivalent Model of Makes Mentioned in PS.
S & F in replacement 400 Amp MCCB TP, 25 KA adjustable thermal setting 0.8-1.0x IN thermal release 80-100 (A) necessary copper cable for & flexible PVC conduit for internal connection for distribution complete all as specified and as directed. Make- Havells Cat Part No IHLLSEB0400 or equivalent model of make mentioned in PS.
S & F in replacement 630 Amp MCCB TP, 25 KA adjustable thermal setting 0.8-1.0x IN thermal release 80-100 (A) necessary copper cable for & flexible PVC conduit for internal connection for distribution complete all as specified and as directed. Make- Havells Cat Part No IHLLNFB30630 or equivalent Model of Makes Mentioned in PS.
S& F in repair set of Copper lead (Wire) 2.50 mtr long with clamp for 12Volts 180 AH Batteries complete all as specified and as directed.
S&F in repair Lead Acid Battery 12Volts, 180AH suitable for DG set complete all as specified and as directed.
Disconnection terminal of LT cable and locating pin point fault in LT cable 1100V grade of any size including to & from hire charge of special T&P complete all as specified and as directed.
Disconnection terminal of HT cable and locating pin point fault in HT cable 11000V grade of any size including to & from hire charge of special T&P complete all as specified and as directed.
Cleaning of fuel tank made out of MS sheet of capacity upto 320 KVA DG Set of 500/1000 litre capacity approx by draining out fuel in a separate container, taking out all silt/ dirt, deposition inside the tank, cleaning it completely by manual labour and necessary T&P and refitting and connecting with fuel pipes with DG sets all as per site requirement complete all as specified and as directed.
Supply only in repair Aluminium lugs for cable of size 400 to 630 Sqmm complete all as specified and as directed.
Supply only in repair Aluminium lugs for cable of size 70 to 95 Sqmm complete all as specified and as directed.
Supply only in repair Aluminium lugs for cable of size 100 to 300 Sqmm complete all as specified and as directed.
M&L for carrying out load balance distribution on LT side by checking the existing load on the feeder (3 phase, 4 wire system) and accordingly shifting & connecting service cables to another phase conductor in accordance with balancing of Electric load complete all as specified & directed. Contractor shall submit reports before load balance and after load balance as per format given by the department complete all as specified & as directed.
Supply, laying connecting and testing in replacement XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 400 Sqmm, 3.5 core, laid in trenches / duct, passing through pipe / duct, or fixed on pole including taking down old cable complete all as specified & as directed.
Supply, laying connecting and testing in replacement XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 300 Sqmm, 3.5 core, laid in trenches / duct, passing through pipe / duct, or fixed on pole including taking down old cable complete all as specified & as directed.
Supply, laying connecting and testing in replacement XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 240 Sqmm, 3.5 core, laid in trenches / duct, passing through pipe / duct, or fixed on pole including taking down old cable complete all as specified & as directed.
Supply, laying connecting and testing in replacement XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 185 Sqmm, 3.5 core, laid in trenches / duct, passing through pipe / duct, or fixed on pole including taking down old cable complete all as specified & as directed.
Supply, laying connecting and testing in replacement XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 120 Sqmm, 3.5 core, laid in trenches / duct, passing through pipe / duct, or fixed on pole including taking down old cable complete all as specified & as directed.
Supply, laying connecting and testing in replacement XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 95 Sqmm, 3.5 core, laid in trenches / duct, passing through pipe / duct, or fixed on pole including taking down old cable complete all as specified & as directed.
Supply, laying connecting and testing in replacement XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 70 Sqmm, 3.5 core, laid in trenches / duct, passing through pipe / duct, or fixed on pole including taking down old cable complete all as specified & as directed.
Supply, laying connecting and testing in replacement XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 50 Sqmm, 3.5 core, laid in trenches / duct, passing through pipe / duct, or fixed on pole including taking down old cable complete all as specified & as directed.
Supply, laying connecting and testing in replacement XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 25 Sqmm, 4 core, laid in trenches / duct, passing through pipe / duct, or fixed on pole including taking down old cable complete all as specified & as directed.
Supply, laying connecting and testing in replacement XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 16 Sqmm,4 core, laid in trenches / duct, passing through pipe / duct, or fixed on pole including taking down old cable complete all as specified & as directed.
Supply, laying connecting and testing in replacement XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 630Sqmm, 1 core, laid in trenches / duct, passing through pipe / duct, or fixed on pole including taking down old cable complete all as specified & as directed. Note for item No 49.00 to 59.00:- (i) Excavation, Earthwork, sand cushion and cable cover shall be measured and paid separately under respective items of this Schedule.
Taking down defective self starter from DG sets of capacity 40/63 KVA, repair/replacememt of carbon brush, stator, rotor winding, bearings and reassembling the same and reinstalled in DG sets including testing complete all as specified and as directed.
Taking down defective self starter from DG sets of capacity 100/160 KVA, repair/replacememt of carbon brush, stator, rotor winding, bearings and reassembling the same and reinstalled in DG sets including testing complete all as specified and as directed.
Taking down defective self starter from DG sets of capacity 200/320 KVA, repair/replacememt of carbon brush, stator, rotor winding, bearings and reassembling the same and reinstalled in DG sets including testing complete all as specified and as directed.
Taking down defective self starter from DG sets of capacity 500 KVA, repair/replacememt of carbon brush, stator, rotor winding, bearings and reassembling the same and reinstalled in DG sets including testing complete all as specified and as directed.
Supply only in replacement digital/analog type Ammeter 0 to 100 Amp of size 100 mm x 100 mm complete all as specified and as directed.
Supply only in replacement analog type Voltmeter 0 to 500 V of size 100 mm x 100 mm complete all as specified and as directed.
Supply only in replacement Panel indicator 220 V for main ON/OFF indicator complete all as specified and as directed.
Supply only in replacement single Phase Preventor as per sample complete all as specified and as directed. Model: VSP-2 Make: Minilec/L&T
Supply only in replacement Engine Starting Relay as per sample at site complete all as specified and as directed.
Supply only in replacement On-Delay timer of 230 VAC, Range: 0 to 60 sec. complete all as specified and as directed.
Supply only in replacement Under Voltage relay as per sample at site complete all as specified and as directed.
Supply only in replacement single core copper conductor PVC insulated unsheathed 100 V grade flexible 4 Sqmm complete all as specified and as directed.
All as per ser Item No 73.00 here in before but 6 Sqmm complete all as specified and as directed.
Calibration of injector, PT pump and repair of turbo including minor spare parts of the following DG Sets including installation, testing and commissioning complete all as specified and as directed:-
DG Set 63 KVA
DG Set 110/160 KVA
DG Set 200 KVA
DG Set 320 KVA
DG Set 500 KVA
Supply and topping Distilled Water for DG Set battery complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed.
Supply and laying clean dry sand for cable cushion including gently punning complete all as specified and as directed. Note: Punned thickness of sand shall be measured for payment purpose.
M&L for burnt brick sub class ‘B’ laid in trenches abutting each other width equal to length of bricks all as specified and as directed.
Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each layer complete all as specified and as directed.
Removing the surplus soil to a distance not exceeding 50 mitre and depositing where directed at level not exc 1.5 mitre above the starting point complete all as specified and directed.
S& F in repair hand operated Crimping tool capacity upto 500 Sqmm with all die complete all as specified and as directed. Make : Jainson, Model AAKASH-500 or equivalent model of Dowells/Bosch
S& F in repair hand operated Crimping tool capacity 25 Sqmm to 400 Sqmm with all die complete all as specified and as directed. Make: Dowell's Model SYT-400 or equivalent model of Bosch/Jainson
S& F in repair 11 KV HT hand Gloves rubber insulated complete all as specified and as directed.
S& F in repair Combination pliers insulated with thick C.A Sleeve complete all as specified and as directed. Make -Taparia Product Code 1621-6 or Equivalent Model of Bosch/Jainson
S& F in repair long nose pliers insulated with thick C.A Sleeve complete all as specified and as directed. Make -Taparia Product Code 1430-6 or Equivalent Model of Bosch/Jainson
S& F in repair wire stripping pliers insulated with thick C.A Sleeve complete all as specified and as directed. Make -Taparia Product Code WS-06 or Equivalent Model of Bosch/Jainson
S& F in repair Universal Set (Adjustable Spanner, Insulated Pliers Screw Drivers) complete all as specified and as directed. Make -Taparia Product Code 1005 or Equivalent Model of Bosch/Jainson
S& F in repair Home tool kit complete all as specified and as directed. Make -Taparia Product Code 1021 or Equivalent Model of Bosch/Jainson
S& F in repair Allen Key set (10 Nos) complete all as specified and as directed. Make -Taparia Product Code AKI-10 or Equivalent Model of Bosch/Jainson
S& F in repair line tester complete all as specified and as directed. Make -Taparia Product Code 813 or Equivalent Model of Bosch/Jainson
S& F in repair screw driver set complete all as specified and as directed. Make -Taparia Product Code 840 or Equivalent Model of Bosch/Jainson
S& F in repair Pipe wrinch, 350 mm length, suitable for upto 40 mm bore pipes complete all as specified and as directed. Make -Taparia Product Code 1274 or Equivalent Model of Bosch/Jainson
S& F in repair 1500 Watt High Pressure Washer including Motor, Pump & Gun etc complete all as specified and as directed. Make - Bosch Model Aquatak 125 or Equivalent Model of Stanley/Chasten/Karcher
S& F in repair 620 Watt Air blower complete all as specified and as directed. Make - Bosch Model No GBL 620-Watt or Equivalent Model of Stanley/Chasten/Karcher
S& F in repair 5 Watt LED Torch with high intensity focused beam with twin switching mode complete all as specified and as directed. Make - Havells Ordering Code LHEXAOPFUN1G005 or Equivalent Model of Make mentioned in PS.
S& F in repair 5 Watt LED lantern cum Torch with twin charging mode 5V charging cable or integrated solar Panel complete all as specified and as directed. Make - Havells Ordering Code LHEXTDP7HN1G005 or Equivalent Model of Make mentioned in PS.
Vishal Traders
Saini Enterprises
M/s Adhikari construction co.
Charan sales and Service
SANJEEV ENTERPRISES
Mangalam Trades
PARKASH ENTERPRISES
M/S Rohit Enterprises
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .