Loading
Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.1 L
Closing Date
12 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GENERAL
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of 'V/N' crores or 'V' crores whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB of PART-V of Tender Document , along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Please refer Clause 3.5 of PART-I of Tender Document.
Technical Eligibility Criteria:- The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the t e n d e r . Definition of Similar Nature of work:- "Wiring/Rewiring in buildings with associated electrical works. OR Lighting arrangement in buildings, circulating area, yard, street etc. with associated electrical works. OR Wiring/Rewiring, Lighting arrangement in buildings with associated electrical works." Please refer Clause 3.4 and Clause 3.5 of PART-I of Tender Document. NOTE:- Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Special Eligibility Criteria:- Tenderers should possess a valid electrical contractor license at the time of opening of tender, issued by any state government & same should be submitted along with tender documents by all bidders including working contractors of this unit otherwise offer shall be SUMMARILY REJECTED.
29 conditions · 4 needing a document upload
Tenderer Shall submit COVER LETTER (TENDER FORM-1) as per Section 4.2 of PART-I of Tender Document duly filled. The Cover Letter must be submitted by the Tenderer on its letter head. Please refer Section 4.2 COVER LETTER , TENDER FORM-1 of PART-I of Tender Document.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.Tenderer shall submit the documents as mentioned in Clause 3.7 of of PART-I of Tender Document. The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF/ LLP etc. if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected . Format of POA is given in TENDER FORM-3 of PART-I of Tender Document. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate. The tenderer shall submit all the relevant documents mandatorily as mentioned in Clause 3.7 of PART-I of Tender Document.
Necessary information about Employment/Partnership etc. of Retired Railway Employee as per details mentioned in Clause 3.12 of PART-I of Tender Document should be given by tenderer . If no Retired Railway Employee is employed by tenderer then the tenderer shall submit an Undertaking as in Annexure-XXVI of PART-V of Tender Document that no railway employee is employed. Note:- If information as required as per above clause has not been furnished, contract is liable to be dealt in accordance with provision of clause 62 of PART-II of GCC-2022.
Tenderer should submit documents related to registration Details, PAN, GSTIN, Registered Address, Bank Details etc.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self-attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating his/their tender.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
In case of any wrong information submitted by tenderer, the contract shall be terminated, Bid security, Performance Guarantee (PG) and Security Deposit (SD) of contract forfeited and agency barred for doing business on entire Indian Railways for 5 (five) years.
The GST Act 2017 will be applicable as per extant policy as notified by Central/State Govt. and as amended from time to time. All the bidders/tenderers should ensure that they are GST compliant and their quoted rates are inclusive of taxes and GST @ 18%.
No Post Tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suo-moto post tender letters of the tenderers shall be treated as NULL & VOID. (Authority HQ Letter No. 74-W/O/Pt.XXV/WA/Loose dated 07.04.15).
The contract will be governed by Indian Railways Standard General Conditions of Contract updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents.
Conditional offer and Alternative proposal by Tenderer: Tenderers shall submit offers that fully comply with the requirements of the Tender documents including the conditions of contract, design and specification requirements if any. Conditional offer or alternative offers will not be considered in tender evaluation and will be summarily rejected. The Tenderer shall have no claims in this regard whatsoever. "Any unconditional rebate offered by the tenderer should be mentioned on of 'Schedule of Quantities' specifically. To attract the rebate mentioned each page of schedule may refer the note for the conditional rebate mentioned in the end. Any rebate mentioned at any other place in tender document shall not be considered. The unconditional rebate mentioned in "Scheduled of Quantities" shall be considered while evaluation of bid." mentioned in the end. Any rebate mentioned at any other place in tender document shall not be considered. The unconditional rebate mentioned in "Scheduled of Quantities" shall be considered while evaluation of bid."
Electrical work for Construction of holiday home/subordinate ORH at Haridwar (HW) ,Yog Nagari Rishikesh (YNRK),Dehradun & Mussorie, Electrical work for Improvement of Air Conditioning systems, water coolers, desert coolers etc for HW & adjoining locations, Electrical work for provision of ramp for existing FOB at Raiwala station on LRJ-DDN section ,Electrical work for provision of High-Level Platforms (PF1) and provision of FOB ramp at AITHAL under ADEN-RK ,Electrical work for provision of High-Level Platforms (PF2) along with ramp for existing FOB at PRI under ADEN/HW & Electrical work for provision 3.0 wide FOB at LAKSAR station on NBD-SRE section.
13_SrDEE_G_MB_2026
13_SrDEE_G_MB_2026
Open
Works - General
6 Months
Moradabad, Uttar Pradesh
₹0
₹2.1 L
12 Jun 2026
21 May 2026
29 May 2026
204 items across 7 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 26,33,931.2 | ||
| — | 2000.00 | — | — | ||
| "Supply and recessing/fixing of PVC conduit pipe with accessories, junction box etc. including making chase, and plastering/clamping etc.as per technical specifications. PVC conduit pipe conforming to IS: 9537 Part-III. 1987 (Latest version) Size:25 mm dia (Medium). Note:- On ceiling/locations where provision of recess conduit is not possible then conduit will be provided on surface as per site condition and as per instruction by Rly. Representative. " | — | — | — | 91,220 | |
| — | 200.00 | — | — | ||
| "Supply and recessing/fixing of PVC conduit pipe with accessories, junction box etc.as per technical specifications.PVC conduit pipe conforming to IS:9597 Part-III.1987 (Latest version)Size:25mm dia (Heavy) for roof. Note:- On ceiling/locations where provision of recess conduit is not possible then conduit will be provided on surface as per site condition and as per instruction by Rly. Representative. " | — | — | — | 19,000 | |
| — | Breakup | for details. | — | ||
| Supply of FRLSH, PVC insulated multi stranded copper conductor single core cable conforming to IS:694(latest version), and drawing in laid (recessed/surface) MS/PVC conduit pipe for wiring of point wiring/circuit wiring/sub main/Main as required as per technical specification including connections, testing and commissioning of following sizes: | — | — | — | 3,97,020 | |
| — | 160.00 | — | — | ||
| Supply of Batten/Angle Holder/Ceiling rose & installation with 3mm thick white Phenolic laminated sheet on the Junction Box/ Fan Box etc of laid conduit including connections, Testing & commissioning as per relevant IS and Tech. Specification and as per site requirement. | — | — | — | 2,923.2 | |
| — | 80.00 | — | — | ||
| Supply & fixing of complete 18-20 watt LED, tube light fitting 1200 mm Integrated with Aluminium Extrusion Base with LED & Driver, decorative pin type end caps & copper contacts with Diffuser made of transparent polycarbonate with tube light, operating voltage single phase 230 volt AC, 50 Hz conforming to CEE/NR specification No. -CEE/NR/121-Elect./PS/2018(Rev. 3) ,dated. 28.06.2018 and PCEE/NR/121-Elect/PS/2019 (Rev-4), dated 04.11.2019 or Latest. | — | — | — | 42,238.4 | |
| — | 20.00 | — | — | ||
| Supply, erection, fixing, testing & commissioning of BLDC Ceiling Fan of sweep 1200 mm, Air delivery range from 210 cubic metre per minute to 220 cubic metre per minute and input power consumption range from 26W to 35W ( Star Rating - 5 Star, Service Value - 6 & above cubic metre per minute per watt ) with remote for speed control of fan suitable for operation on 1 Ph, 50Hz, 240V power supply system (conform to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ) | — | — | — | 54,304.6 | |
| — | 20.00 | — | — | ||
| Supply, erection, fixing, testing & commissioning of Fresh air Fan size 12'' 220 V.AC.,50 Hz, ISI marked, to be approved by SrDEE/G/MB complete in all respect as per tech. specification / site requirement. | — | — | — | 37,845 | |
| — | 4.00 | — | — | ||
| Supply, fixing, testing & commissioning of Main TPN Distribution Board Double Door 4 way complete with 01 No. MCCB 63/100 Amps.( 4 pole, 35 KA ) and 12 Nos. SP MCB 6-32 Amps. of 10 KA complete in all respect & as per IS technical specification & site requirement. | — | — | — | 52,445.68 | |
| — | 2.00 | — | — | ||
| Earthing with 600x600x3 mm thick GI plate earth eletcrode as per IS : 3043 ( latest version ) to achieve earth resistance less than 1 ohm including construction of masonry enclosure with hinged cover plate of cast iron with locking arrangement ( Approximate size 600x600 mm. on top, watering pipe, connections from earth plate to top with 40x6 mm. GI strip in 50 mm. dia GI pipe class ' B ' provision of earth plate as per drawing and technical specification. | — | — | — | 6,651.4 | |
| — | 30.00 | — | — | ||
| Connections with GI strips in 300 mm deep in ground / recessing in floor clamping in trenches of sub-station by grouting clamps manufacture with MS sheet 14 SWG from Earth electrode strip to HT Panel/LT Panel/AMF Panel /Transformer/ DG Set etc. as per approved drawing and technical specification including supply of material size ( 2 Nos. 40 x 5 mm. or 40 x 10 mm ). | — | — | — | 4,489.5 | |
| — | 2.00 | — | — | ||
| Earthing with 40mm dia. GI pipe class 'B' , 3 meter long, earth electrode as per IS:3043 (latest version) to achieve earth resistances less than 5 ohms including construction of masonry enclosures with hinged cover plate of cast iron/RCC(Heavy Duty with lifting arrangement) with locking arrangement as required (Outer hole size: 450XmmX450mm and Cover plate(CI/RCC) size:300mmX300mm) on top, provision of earth plate, connections from earth electrode to switch gear/pole as per technical Specification/I.E. Rule. | — | — | — | 6,123.32 | |
| — | Breakup | for details. | — | ||
| Supply & Installation of modular type switches /sockets/Fan Regulator etc. ISI marked as per relevant IS on the existing modular plate & switch boxes including connections testing & commissioning as per technical specifications of the following sizes:- | — | — | — | 77,016.8 | |
| — | Breakup | for details. | — | ||
| Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess as required of following sizes:- | — | — | — | 42,149.4 | |
| — | Breakup | for details. | — | ||
| Laying, underground/road/Railway track, recessing in platform/ wall along with Rly. Track/in laid RCC/GI pipe as required 1.1KV grade LT XLPE insulated armored, aluminum conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks width wise, provision of cable route marker as per Tech. Specification including end terminations with aluminum clamping socket/lugs lugs testing & commissioningand shall be in conformity to IS 1255 /1983 (Latest Version). Excavation shall be done complying with code of safety as per IS 3764/1992. Cable route plan should be submitted by firm for approval of C.A. before execution. Cable route marker should be attached with the laid cable through 'J' hook and display board should be above the ground.) Note: Cable will be supplied by Railway. | — | — | — | 7,93,260 | |
| — | 4.00 | — | — | ||
| Supply,Installation,Testing & Commissioning of 63 Amp. 4P-RCCB 100mA, 50Hz in TPN DB. As per specification. | — | — | — | 13,985.12 | |
| — | 12.00 | — | — | ||
| Installation, fixing, testing and commissioning of 1 to 2 ton capacity Split type AC including suction / discharge copper tubing charges & ducting arrangement for waste water discharge complete in all respect & as per site requirement. (Air conditioners will be supplied by Railways). | — | — | — | 22,681.08 | |
| — | 12.00 | — | — | ||
| Supply, erection, fixing, testing & commissioning of Modular AC box with 32 Amps plug socket and 32 Amps. DP MCB (10 KA) complete in all respect & as per site requirement. | — | — | — | 22,396.56 | |
| — | 12.00 | — | — | ||
| Supply, installation, testing & Commissioning of light weight wall mounted type Voltage Stabilizer confirming to IS : 8448 suitable with toroidal care transformer having capacity 4 KVA, input voltage 135 - 290 Volt and output voltage 220 - 240 Volt, MCB 32 Amps, time delay relay ( 2 - 4 min ) with soft touch type instant and start switch, under voltage and over voltage cut off with indicators. Digital Voltmeter and Ammeter with soft type selector switch for measuring input & output voltage, indicator for power ON and timer ON. | — | — | — | 30,333.72 | |
| — | 12.00 | — | — | ||
| Supply, erection, testing & commissioning of ISI marked Stationary storage Vertical vented type electric water heater conforming to IS: 2082/1993 with latest amendments , material of inner container copper Capacity 25 Ltrs., 1500 watt, pressure 60N/SQM, Class-I complete with element, thermostat etc and suitable for operation on 240 volts single phase AC50 Hz supply BEE 5 Star rating complete in all respect as per site requirement. | — | — | — | 83,444.04 | |
| — | 50.00 | — | — | ||
| Supply, fixing, testing and commissioning of LED down lighter, housing aluminum die cast, white powder coated and PMMA diffuser having system wattage less than or equal to 15 Watt complete with all mounting arrangement, complete with accessories conforming to CEE/NR's spec. No. CEE/NR/121-Elect/PS/2018 (Rev- '3') or latest & PCEE/NR's spec. No. PCEE/NR/121-Elect/PS/2019 (Rev- '4') or latest. | — | — | — | 36,295 | |
| — | 50.00 | — | — | ||
| Supply, Installation, testing & commissioning of Concealed MS box size 4 Inch for Downlighter as per site requirement. | — | — | — | 7,891.5 | |
| — | 16.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of 10 watt LED Garden Light (SMD LED Chip) operating voltage single phase 230 volt AC, 50 Hz conforming to CEE/NR specification no. CEE/NR/121Elect/PS/2018(REV-3), dt. 28.06.2018 & PCEE/NR/121-Elect/PS/2019 (REV.-'4'), dt:04.11.2019 (Attached) or latest including protection of the entire housing as per IS:10322(Part 1):1982 latest-IP66, Luminaires casing/housing shall beTop Spun Aluminium /Die cast Aluminium and Bottom Die CastAluminium with higherthermal conductivity, Mounting Fixture size- 150mmx100mmx600mm, Suitable connector shall be provided for LEDconnection between driver output and LED, extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., corrosion resistant powder coated, Thickness and Ik rating Diffuser-3mm, IK-08, Mounting Pipe size-70 mm, Length of ISI marked three core wire shall be provided along with supply of material50 cm complete in all respect and as per site requirement. | — | — | — | 39,545.12 | |
| — | 4.00 | — | — | ||
| Design & manufacture LT switch board as per IS 8623/IEC 60439, Supply, Installation, fixing, testing & commissioning of cubicle , floor /wall mounted type, dust & vermin proof LT Switch Board, 3 phase, 4 wire 415 volt, AC supply system. The LT. Switch Board shall be powder coated. The switch board shall be complete with inter connections, instrument connections with copper conductor cable, copper busbar & front operated switchgears, Volt meter on each Incoming Panel, Ampere meter Digital with Selector switch on each I/C & O/G panels, Indication lights ( lamp set.) earthing studs etc. comprising of following ie. I/C MCCB 100 Amps (35KA) 4 pole-1 No, O/G 63 Amps MCCB (35KA) 4 pole-3 Nos.,32 Amp MCB DP(10KA)-12 Nos. complete in all respect and confirming to relavant IS and as per site requirement. | — | — | — | 3,48,066.08 | |
| — | 8.00 | — | — | ||
| Supply and fixing of 5 meter long Hot dip galvanized octagonal pole with foundation, base plate, fixing of 01/02 nos. arm 1000 mm. for the fittings including smart pack junction box with 06 Amps. MCB DP (10 KA) and terminals as per technical specification & complete in all respect/as per site requirement. | — | — | — | 98,616.16 | |
| — | 46.00 | — | — | ||
| Supply, installation, testing & commissioning of complete 60 watt LED Street light fitting, operating voltage single phase 230 volt AC, 50 Hz with suitable Pressure Die Cast Aluminium Housing and LED Driver conforming to CEE/NR specification no. CEE/NR/121-Elect/PS/2018 (REV-3), dt. 28.06.2018 & PCEE/NR/121-Elect/PS/2019 (REV.-'4'), dt:04.11.2019 (Attached) or latest. | — | — | — | 2,03,086.32 | |
| — | 60.00 | — | — | ||
| Design, Manufacture, supply, fixing, testing & commissioning of double sided LED type signage's of suitable size as per CEE/NR specification No. CEE/NR specification no. CEE/NR/121- Elect/PS/2018(REV-3), dt. 28.06.2018 & PCEE/NR/121-Elect/PS/2019 (REV.-'4'), dt:04.11.2019 (Attached) or latest and as per site requirement. Note:- Static / Double sided Board of different sizes name is required. Prior approval of Message, Colour and size to be taken from competent authority i.e Sr.DEE/G/MB. | — | — | — | 1,00,903.2 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
LEDRev.3spec._compressed.pdf
ATTACHMENT
CEELEDSPecMerged.pdf
ATTACHMENT
CEELEDSPecMerged.pdf
ATTACHMENT
JPODigging.pdf
ATTACHMENT
correctionslipsmerged_compressed.pdf GCC correction slips
ATTACHMENT
I.R.GCC_April-2022.pdf
ATTACHMENT
Tenderdocument-13-2026.pdf
ATTACHMENT
Annexure-U1.pdf
ATTACHMENT
letterofcredit.pdf
ATTACHMENT
correctionslipsmerged_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .