Loading
Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹28.6 L |
Tender Value
₹41.2 L
EMD Value
₹82,500
Closing Date
17 Mar 2026, 3:00 pmClosed
Executive Engineer, BUILDING DIVISION SAHARSA
EE
Executive Engineer, Buiding Division Saharsa
Superintending Engineer, BUILDING CIRCLE SAHARSA
SE
Repair/Renovation of Jannayak Karpuri Thakur Hostel, Saharsa, in Saharsa district (Building repair work, sanitation installation work, and water supply work)
125958
NIT 12/BCD/SAHARSHA/2025-26
Open Tender
CIVIL
Saharsa
• 1) Audited Annual Financial Turnover from Chartered Accountant for the years
2022-2023
2023-2024
2024-2025
• 2) Certificates by Employer (not below the rank of Executive Engineer) for successful completion of works during last five years, specifying
i. Name of work
ii. Employer
iii. Location
iv. Contract amount
v. Date of start
vi. Date of completion
vii. Number of storey
viii. Total built up area of building in contract
• 3) List of Works in hand (Existing Commitment) specifying
i. Name of work
ii. Employer
iii. Location
iv. Contract amount
v. Date of start
vi. Date of completion.
• 4) C.V. of Engineers with
i. Educational qualification certificate
ii. Individual affidavit of Engineer to perform the job if allotted to bidder
• 5) Document showing ownership of plants and equipment needed for successful completion of work :-
i. Automatic Batching plant with accessories
ii. Concrete Mixer with weighing facility
iii. Steel centering and shuttering showing area in square feet
iv. water Tanker
v. Vibrator
• 6) Details of financial availability:-
i. Certificate of any Nationalized Bank extending credit facility up to 10 % of B.O.Q Amount
ii. Self declaration of investing 25 % of B.O.Q Amount.
• 7) Certificates in the form of Affidavit by the bidder for: -
i. Bidder had not abandoned any project which was taken up by bidder
ii. Bidder had never been in Litigation lying in any court of law with employer of previous works
iii. Bidder had no relative or any person directly or indirectly involved in design, execution, supervision and testing of this tendered
• 8) Bidding Capacity statement
Bidding Capacity, BC = A x N x 2 ? B
Where,
A= Maximum ATO at current price level (with 8% annual indexation)
N = Time of completion of this tendered work in years
B = Value of works in hand (Existing Commitment of Bidder)
CIVIL
PERCENTAGE
L1
1
12 documents required · 12 mandatory
₹5,000
Processing Fee: 590
₹82,500
OFFICE OF S.E, BUILDING CIRCLE SAHARSA ON 02-03-2026 AT 03:00 TO 4:00 PM
24 May 2026
23 Feb 2026
18 Mar 2026
23 Feb 2026
17 Mar 2026
23 Feb 2026
2 Mar 2026
BILL OF QUANTITY
dk;Z dk uke%& lgjlk ftykUrxZr lapkfyr tuuk;d diwZjh Bkdqj Nk=kokl] lgjlk dh [email protected])kj ¼Hkou dh ejEefr dk;Z] LoPNrk vf/k"Bkiu dk;Z ,oa tykiwfrZ dk;Z½
Estimated Cost:-41,24,568.00 Sold to
Earnest Money :- 82,500.00 M/R No.
Cost of B.O.Q :- 5000.00 Date :-
Date of Tender :-
Time of Completion :-
S.L Schudle No. Item Qty Unit Rate Amount
1 0L01 + CP 15% +L.cess 1% Un Skilled labour 20.00 Nos 355.42 7108.00
4 15.12.1 Desman tiling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrage, holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sqm and below 54.00 Nos 151.80 8197.00
5 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 1805.91 sqm 21.70 39188.00
6 13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 1656.89 sqm 141.50 234450.00
7 13.24.2 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) 149.04 sqm 125.60 18719.00
8 13.80 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. Gmplete 7260.80 sqm 9.70 70430.00
9 13.80A.1 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1471.94 sqm 81.10 119374.00
10 13.78.2+ 13.77A.2 Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper primerDistempering with 1st quality washable distemper (ready made ) of approved manufacturer and of required shade and colour complete. As per manufacture's specifications. One or more coats on old work 6234.59 sqm 72.70 453255.00
11 13.78.1+ 13.79.2 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade Old work (one or more coats) 2832.12 sqm 99.70 282362.00
12 15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 544.64 sqm 30.70 16720.00
13 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 14.63 cum 3998.10 58492.00
14 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. 292.66 sqm 686.80 200999.00
15 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 251.98 sqm 795.00 200324.00
16 11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand ) 20 to 25 mm thick - 99.50 sqm 1252.70 124644.00
17 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm 12.36 sqm 1334.90 16499.00
18 15.2.2 Demolishing cement concrete including disposal of material within 50 metre lead: 1:4:8 or leaner mix 64.50 cum 599.80 38687.00
19 11.4 52 mm thick cement concrete flooring with metallic concrete hardener topping under layer 40 mm thick cement concrete 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick metallic concrete hardener consisting of mix 1:2 (1 cement hardener mix:2 stone aggregate 6 mm nominal size) by volume @ 2 liter per 50 kg of cement or as per manufacture specification. This includes cost of cement slurry, etc. but excluding the cost of nosing of steps etc. complete. 1289.99 sqm 472.00 608875.00
20 9.1.3 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood. 0.49 cum 63149.60 30943.00
21 9.21.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 33.21 sqm 1641.50 54514.00
22 21.1.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 327.60 kg 386.10 126486.00
24 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness(weight not less than 10kg/sqm) 41.94 sqm 809.30 33942.00
25 14.5.1 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm 29.88 sqm 723.80 21627.00
26 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter 101.00 mtr 257.50 26008.00
27 12.79.5.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Band 87.50 110 mm bend 30.00 Nos 132.00 3960.00
28 12.80.2 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 110 mm 50.00 Nos 182.72 9136.00
29 12.79.4.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm 25.00 Nos 190.70 4768.00
31 12.79.4.1 Single tee without door 75x75x75mm 5.00 Nos 124.20 621.00
32 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
a 18.8.1 15 mm nominal outer dia Pipes 15.00 mtr 278.20 4173.00
b. 18.8.2 20 mm nominal outer dia Pipes 40.00 mtr 350.80 14032.00
c 18.8.3 25 mm nominal outer dia Pipes 80.00 mtr 463.10 37048.00
d. 18.8.4 32 mm nominal outer dia Pipes 20.00 mtr 549.80 10996.00
33 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 32.00 Nos 434.20 13894.00
34 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore 16.00 Nos 708.40 11334.00
35 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore 16.00 Nos 500.40 8006.00
36 18.16.1 Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 20.00 Nos 303.80 6076.00
37 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter 16.00 Nos 190.10 3042.00
38 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 8.00 Nos 713.30 5706.00
39 18.58.1.1 Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia 4.00 Nos 33.20 133.00
40 9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 60.00 Nos 130.80 7848.00
42 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding 307.20 sqm 144.50 44390.00
43 17.13.2 Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm 32.00 sqm 2283.30 73066.00
44 17.18.1 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White 32.00 Nos 905.50 28976.00
45 17.7.4 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 8.00 Nos 2135.80 17086.00
46 18.74.2 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length 48.00 Nos 108.00 5184.00
47 17.23 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 8.00 Nos 1024.90 8199.00
48 17.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia 24.00 Nos 104.40 2506.00
49 13.82 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:
a 13.82.4 Old wood work (one more coats) 465.44 sqm 54.10 25180.00
b 13.82.3 Old steel work (one or more coats) 276.00 sqm 54.10 14932.00
50 13.81.1+ 13.82.2 Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood) Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New wood work (two or more coats) 33.21 sqm 123.20 4091.00
51 9.51.1 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With second class teak wood beading 62x19 mm 138.00 sqm 992.40 136951.00
52 9.57.2 Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 100x58x1.90 mm 275.00 Nos 30.00 8250.00
53 9.100.2 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 76.00 Nos 50.30 3823.00
54 9.97.5 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 100x10 mm 64.00 Nos 54.70 3501.00
55 9.96.2 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250x16 mm 24.00 Nos 210.10 5042.00
56 15.3 Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material withing 50 metres lead: 2.01 cum 1411.20 2837.00
57 5.3 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). 3.46 cum 5335.90 18462.00
58 5.9 Centring and shuttering including strutting,propping etc. and removal of form for.
a 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. 11.56 sqm 404.70 4678.00
b 5.9.3 Suspended floors, roots, landings, balcnies and access platform. 16.09 kg 437.50 7039.00
59 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
a 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. 124.56 kg 94.50 11771.00
b 5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 93.42 kg 92.60 8651.00
c 5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia. 93.42 kg 90.80 8483.00
60 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 2.00 Nos 33603.40 67207.00
61 19.30.2.1 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : 4.00 Nos 5107.40 20430.00
62 17.33 Carriage of Materials
A Coarse sand 76.30 cum 3766.20 287361.00
B Stone Chips 88.34 cum 1983.18 175194.00
63 Extra Cost Of Materials
Total Rs. 3986495.00
Correction Facted 0.982 on SOR & DSR Item A 3914738.00
As per Letter no- 5751 (B) , Dated- 18.07.2023 Remining GST 5.36% B 209830.00
total (A+B) 4124568.00
G.Total 4124568.00
Executive Engineer
Building Division, Saharsa
aoc.json
Purchase Order
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
UDIN LETTER FOR ATO.pdf
NIT • 2.18 MB
MARKING CHART.pdf
NIT • 3.92 MB
NIT 12.pdf
NIT • 0.85 MB
Karpuri Thakur B.O.Q.xlsx
NIT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .