Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹60.0 LAccepted-AOC C 223 MIANWALI COLONY GURUGRAM 122 001 HARYANA | GURUGRAM | GURUGRAM | HARYANA | 122001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹61.4 L+₹70,390 (1.16%)Rejected-Finance | L2 | Rejected-Finance Being not lowest tenderer | |
| 3 | L3₹61.5 L+₹85,151 (1.40%)Rejected-Finance F 83 GREEN PARK MAIN NEW DELHI 110016 | NEW DELHI | NEW DELHI | DELHI | 110016 | L3 | Rejected-Finance Being not lowest tenderer | |
| 4 | L4₹64.3 L+₹3.6 L (5.97%)Rejected-Finance H NO 1366 3 GALI NO 6 MATA ROAD NEAR HAPPY MODEL SCHOOL RAJIV NAGAR GURGAON 122 001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | L4 | Rejected-Finance Being not lowest tenderer |
Tender Value
₹75.0 L
EMD Value
₹1.4 L
Closing Date
28 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF TUGHLAKABAD
HQ CWE AF TUGHLAKABAD AF STATION, TUGHLAKABAD PO SANGAM VIHAR NEWDELHI-110080
COMPREHENSIVE MAINTENANCE WORKS B/R AND E/M NATURE IN CERTAIN SMQ P-84 TO 9-89 AT AF STN GURGAON UNDER GE (AF) GURGAON NO.1
2023_MES_625496_1
CWE/TKD/GUR/TOKEN-40 OF 2023-24
Open Tender
Civil Works
Item Rate
270 days
GE (AF) GURGAON NO.1
As per NIT conditions
8 documents required · 8 mandatory
₹1,000
GE (AF) GURGAON NO.1
₹1.4 L
Yes
11 Jan 2024
28 Oct 2023
30 Nov 2023
28 Oct 2023
28 Nov 2023
14 Nov 2023
Amount
Sch 'A' Part-I (Earth Work and Demolition work)
Dismantling of cast iron , concrete, asbestos, PVC pipes, Salt glazed ware drain pipes of any dia and discription from trenches or with walls etc complete all as specified.
Dismantling structural steel work incl. steel door, gate, window guard bars, grills etc. complete all as specified.
Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (withour taking off shutters from the frame all as specified and directed by Engr-in-Charge.
Taking down shutter of any discription n.exc 1.5 Sqm each and removal form site all as specified directed by Engr in Charge.
Taking down existing bitumen felt roof treatment including cement mortar bedding and cleaning the surface and removal outside the MOD land, complete all as specified and directed.
Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.
Dismantling of wall/ floor tile including backing coat any description or any thickness beded and pointed in any cement motar and removal to out of MD land all as specified and directed by Engr-in-Charge
Demolition in cement concrete in ground floor and paving n exc.15 cm thickness (below above ground floor) all as directed by Engr-in-Charge.
Excavating in trenches, not exc. 1.50m wide and not exc. 1.50 m in depth, for foundation of sewage lines and manhole, etc. and getting out in Soft/ Loose Soil, complete all as specified and as directed.
Excavating in trenches,exceeding 1.5 m and not exceeding 3.00M in depth, for foundation of sewage lines and manhole, etc. and getting out in Soft/ Loose Soil, complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and as directed.
Removing excavated surplus soil n exc. 50m at contractor's own arrangement and depositing the soil where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
Sch 'A' Part-II (B/R Work)
S&F in repair 45 cm long PVC connection with two nos PTMT nut and rubber washers suitable for 15mm bore GI Pipe of existing one complete all as specified and as directed by Engineer-in-Charge.
Providing and fixing PTMT Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms for wash basin and sink, of approved quality and colour, complete all as specified and as directed by Engineer-in-Charge.
Providing and fixing P.V.C. waste Flexible pipe 32 mm bore for sink or wash basin including P.V.C. waste fittings complete all as specified and as directed by Engineer-in-Charge.
M&L for ISI marked Rotational moulded polyethylene water storage tanks (cylindricalvertical with closed top) conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge, hoisted and fixed in position all as specified in SSR part-I for capacity 500 liters incl hoisting fixing at speciifed location including tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description complete all as specified and directed. NOTE: - (i) The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. (ii) The Contractor shall submit purchase voucher and the same shall be defaced by the Engr-in-Charge before making payment. Non-submission may lead to non-payment
S & F 100 mm dia Sand cast iron S&S pipe as per IS: 1729 soil waste and vent pipes , ISI marked in any length with or without laid in trenches or in floor with cement joints or fixed with walls etc complete all as specified.
S&F for 100 mm bore Bends (any radius) with oval access door diminishing pieces or tapers (larger bore measured) of Sand cast iron S&S as per IS - 1729 complete all as specified and as directed.
Providing and fixing M.S. stays made of flat 50x5mm length not less than 500 mm and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter 100mm including securing end of stays to wall or roofs complete all as specified and as directed.
S&F cowls of 100mm dia made of Sand cast iron S&S as per IS - 1729 complete all as specified and as directed.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes/ SWR pipes of 110 mm diameter conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including taking down of old pipe of any size and discription and removal from site complete all as specified and directed
Providing and fixing on wall face following unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed
Bend 87.5° for 110 mm Dia pipes
Single tee with door 110x110x110 mm for 110 mm dia pipes
S&F for steel water tubing ISI Marked 15mm bore, galvanised, medium grade with and including provision of all fittings of ISI marked and connected complete incl taking down old GI pipe all as specified and as directed by Engineer-in-Charge.
S&F for steel water tubing ISI marked 20mm bore, galvanised, medium grade with and including provision of all fittings of ISI marked and connected complete incl taking down old GI pipe all as specified and as directed by Engineer-in-Charge.
S&F in repair 15mm dia concealed stop cock chromium plated with long screwed down high pressure with cruteh or butterfly handle screwed both end for iron pipe complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 2 in 1 bib taps 15mm bore long body cast copper alloy fancy type chormium plated butter fly handle screwed down including complete all as specified and as directed by Engineer-in-Charge.
S&F in repair bib taps 15mm bore long body cast copper alloy fancy type chormium plated butter fly handle screwed down including complete all as specified and as directed by Engineer-in-Charge.
S&F in repair angle/ stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 150mm dia fancy type shower roses brass chromium plated with C P arms of length upto 30 cm for 15mm bore GI pipe. complete all as specified and as directed by Engineer-in-Charge.
S&F in repair brass CP mixer (wall/sink/whb) for mixing hot and cold water screwed down for iron pipe and fixed for 15mm bore pipe complete all as specified and as directed by Engineer-in-Charge.
Providing and fixing in replacement Stainless Steel A ISI 304 (18/8) Kitchen sink with drain board of size 510x1040 mm bowl depth 178 mm made of stainless steel 1 mm thick as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required complete all as specified and as directed by Engineer-in-Charge.
Providing and fixing in repair white vitreous china pedestal type water closet (European type W.C. pan) with seat and white lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and as directed by Engineer-in-Charge.
Providing and fixing in repair White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete all as specified and as directed by Engineer-in-Charge.
Providing and fixing bright finished brass helical door spring (superior quality).complete all as specified and as directed by Engineer-in-Charge.
S&F in repair stainless steel 25mm dia tubular curtain rods fancy type including chromium plated brass brackets and fixing with walls and making good of disturbed surface etc complete all as specified and direced by Engr-in-Charge.
Providing and fixing Stainless Steel circular grating for Nahani Trap of approved quality and make-100 mm nominal dia with hole or without hole all as specified and directed by Engr-in-Charge.
Providing and fixing SS towel ring-6 inches dia including Chromium plated brass screws and wooden/plastic cleats all as specified and directed by Engr-in-Charge
Providing and fixing towel rail Towel rail of size is 600mm long of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats all as specified and directed by Engr-in-Charge
S&F in replacement plate rack stainless steel made out of sheet not less than 1 mm thick, size 30 inch 36 inches 10 inche with bracket all necessary fittings all as specified and directed by Engr-in-Charge.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed by Engr-in-Charge.
Providing & fixing C.P. heavy quality Jet Spray, ISI marked with wall flange, wall hook including jointing using Teflon tape etc. complete all as specified and directed. Note: - The cost shall include the Braided connector pipe up to 1000mm long including jointing using Teflon tape etc. complete.
S & F 15 mm bore stop valve/angle cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe all as specified and as directed
M&L for complete removal of existing treatment from old decorated plastered surfaces of walls by Vacuum based sanding machine complete all as specified, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured over a coat of approved primer by spray machine complete all as specified & directed by Engineer-in-Charge.
M&L Preparation old decorated surfaces on ceiling and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and applying two coat of white wash complete all as specified and directed by Engineer-in-Charge.
M&L Preparation of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.
M&L Preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.
M&L 15mm thick rendering other then fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth (without using extra cement) including taking down and complete removal from site complete all as specified and directed by Engineer-in-Charge.
M&L 5 mm thick rendering on ceiling etc surfaces in CM 1:3, finished even and smooth (without using extra cement) including taking down and complete removal from site complete all as specified and directed by Engineer-in-Charge.
M&L fpr Preparing Newly Plastered Surfaces of ceiling and applying Three COATS of WHITE WASHING, complete all as specified and as directed. by Engineer-in-Charge. (Note:- work will be strictly executed by mechinised means/ tools as required for smart periodical services)
M&L for Preparing New Plastered Surfaces of WALLS and applying TWO COATS of DISTEMPER OIL EMULSION (OIL BOUND WASHABLE DISTEMPER) over a Coat of CHALK WHITING, complete all as specified and as directed. by Engineer-in-Charge. (Note:- work will be strictly executed by mechinised means/ tools as required for smart periodical services)
M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand : 2 marble chipping 5 to 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water (mixed with H2SO4 @ 5% scrubbing and washing shall continue till the stone chipping are sufficiently exposed to its natural colour) to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately). Note:- Top layer of shade be of white cement using colouring pigment & stone chipping of desired colour as approved.
Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge 15 x15 mm deep
M&L for gunniting to RCC works in column beams, slabs, chajja, facia, landing, balconies etc by dismantling of RCC (loose concrete) and chipping of unsound/weak concrete material with manual Chisel and/ or by standard power driven percussion type and cutting of steel bar including cleaning the exposed concrete surface and reinforcement with wire brushes etc , after that cleaning the steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry and placing steel bars at location where the balance steel dia is less than half including fixing the steel bars in position using epoxy resin anchor grout of approved make and painting with ant rust coating on exposed steel. The surface then be fixed by welded with hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed (dia of wire shall not be less than 4mm) & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement. The surface then be treated with epoxy bonding adhesive having coverage 2.20sqm/kg of approved make and providing gunniting with a minimum pressure of 2 to 2.5 Kg sqcm and providing, mixing and applying 25mm thick gunniting of SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications complete all as specified and directed by Engineer-in-Charge. Note:- (i) The quoted rate shall be inclusive of all the works. (ii) Work to be carried out as in patches as directed by Engr-in-charge (iii) Rate for scaffolding upto fifth storey shall be included in quoted rate. (iv) All demolished material removed from MOD land completely distance exe 5 km. (v) The prepared area shall be neatly cleaned (vi) The rate of TMT shall not be included in the quoted rate.
S&F in repair cup board shutters & shelves and pelmet boxes having 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws complete all as directed and specified. NOTE:- The purchase Voucher of materials shall be submitted for claiming payment. Non Submission may lead to non payment
Providing and fixing stainless steel Piano hinges ISI marked with over all width 50 mm and fixing with necessary screws etc., complete all as directed.
S&F aluminium alloy door seal 1m long fixed to wooden doors complete all as specified and as directed by Engineer-in-Charge.
M&L post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.complete all as specified and directed by Engr-in-Charge
M&L post construction antitermite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed by Engr and Charge.
M&L fabricated frame work as in doors /windows frame using MS Box section of required size for making rebate to fix Shutter and other section with gusset plate rails, braces etc. complete drilled for fixing Door Shutter with MS Butt Hinges and hole for tower bolt, sliding boltetc or other covering door etc to be prepared for hanging with and including hinges all as specified and as directed.
M&L for mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-charge
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 all as specified and directed by Engr-in-Charge.
Providing and fixing glazing with float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
S&F float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) figured pin headed type, best quality, fixing to Steel Sections as in Panel of Doors/ Windows Shutters and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc. or fixed with Oil Putty, as required/ordered at Site(s), complete and fixed all as specified and as directed.
Providing and fixing 30 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. all as specified and directed by Engr-in-Charge. Note:- The Contractor shall submit purchase voucher and the Engr-in-Charge shall deface the voucher and make the payment. Non-submission of purchase voucher may lead to non-payment.
S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws of size 100X58X1.90 mm etc. complete all as specified directed by Engr-in-Charge
Providing and fixing 200 mm stainless steel fancy handle of approved make fixed with SS screws etc complete all as specified directed by Engr-in-Charge
Providing and fixing aluminium hanging floor Twin rubber door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and directed.
S&F for 150mm x 10mm long ISI marked Powder Coated aluminum barrel tower bolt of extruded aluminium section fixed with flat head ss screw.
S&F for ISI marked Stainless steel sliding door bolt 300mm long with hasp, staple (bolt type) and fixing with stainless steel nut bolts complete all as specified
S & F in repair stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood/alumium beading and fixed with tinned tacks to stainless steel screws etc complete all as specified & directed.
Providing and fixing aluminium work for frame/shutter/fixed portions of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per specified and directed. (Glazing, paneling to be paid for separately) : (Mim Thickness of Section shall not be less than 1.5 mm)((minimum thickness of polyster powder coating 50 micron) NOTE:- The purchase Voucher of Alumnium Section shall be submitted for claiming payment. Non Submission may lead to non payment
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodiccoating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment)(Pattern Deco Gril). NOTE:- The purchase Voucher of Alumnium Grill shall be submitted for claiming payment. Non Submission may lead to non payment
S & F for 30 mm thick factory made solid panel both side prelaminated PVC door shutter with smooth finish confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded both side prelaminated PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide both side prelaminated PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross both side prelaminated PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick both side prelaminated PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed. NOTE:- The purchase Voucher of materials shall be submitted for claiming payment. Non Submission may lead to non payment
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction. NOTE:- The purchase Voucher of materials shall be submitted for claiming payment. Non Submission may lead to non payment
M&L 25mm thick PCC (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed.
Material and labour, 10mm thick cement plaster in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 200ml per 50kg bag of cement on concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane,black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The joints and over lap shall be carried out as per manufature instructions. NOTE: - (i) The vital physical and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. (b) Tear strength in longitudinal and transverse direction as 300/ 250N. (c) Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. (ii) The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. The authorised applicator shall got approved by the Accepting Officer. (iii) The water testing report of roof on which the APP work are carried out shall got signed by concerened JE, AGE, GE and authorised applicator. The same shall be fwd to office of Accepting Officer for record. Non-submission may lead to non-payment. (iv) The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment.
Supply only water proofing liquid compound complete all as specified and directed by Engr-in-Charge.
M&L Appling one coat Bitumen water proofing aluminium heat resistance paint over APP membrane as per manufacture instructions complete all as specified and directed by Engr-in-Charge.
S&F of Reinforced cement concrete drain Pipes 150 mm dia NP-2 , laid in trenches in foul condition, Jointed with collars in cement mortar 1:2 and tested, complete all as specified and as directed.
M&L for Making connection of drain or sewer line For pipes 100 to 250 mm diameter with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. in Foul Condition, complete all as specified and as directed.
M&L for cement concrete 1:3:6 (20mm Graded crushed stone aggregate) Bed for drain pipes of bore 150mm including packing under and haunching against the sides of pipes after they are laid in foul condition and testing, complete all as specified and as directed.
M&L for Brick work with sub-Class ‘B’ bricks (with old size bricks), straight or curved on plan exc. 6m mean radius, built in cement mortar 1:4, complete all as specified and as directed.
Providing and fixing square-mouth S.W. gully trap 150x150 mm size P type class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7 complete all as specified and directed
M&L TMT steel bars of any dia cut to length bent shape required, including cranking bending binding with mild steel wire (annealed) not less than 0.9mm dia quality conforming to relevant IS complete all as specifieds
M&L for Rough finished surfaces concrete formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) all as directed by Engr-in-Charge
M&L for Rough finished surfaces concrete formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 15 cm wide all as specified and directed by ENgr-in-Charge
M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (using for 20 mm thick crushed stone aggregate) in slabs supported on walls, bends, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc all as specified and directed by Engr-in-Charge
M&L glossy chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with white cement and pigments in any colour machine preassed glazed , over cement screed bed 20 mm thick cement motor 1:4 all as specified and as directed by Engr-in-charge.make nitco/arena or equivalent all as specified and directed by Engr-in-Charge. Note: - The contractor shall submit sample as per make listed in Appx 'B' of PS or any ISI marked subjcet to independent testing testing report by GE. The contractor shall submit purchase voucher of tiles for claiming payment.
Material and labour for First quality Non-skid Ceramic coloured tiles jointless, 7-8 mm thick (area of each tile exceeding 0.09 Sqm but not exceeding 0.16 Sqm) laid in floors with neat cement slurry @ 3Kg/Sqm over and including 15mm thick screed bed of cement mortar (1:6) and including pointing in white cement with pigment to match the shade of tilescomplete all as specified and directed.
M&L for glazed ceramic coloured designer concept tiles matching with existing tile 350x250x7 or 450x350x7mm size as in walls set and jointed in neat cement slurry over 10mm thick recuing in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc all as specified and as directed by Engr-in-Charge. Make:- Jhonson/Somany/Kajaria
Providing and laying gang saw cut granite stone of18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. including mirror polishing and bull nosing edging in any position etc all as directed by Engr-in-Charge.
M&L 25 mm thick Kota stone slab flooring over and including 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) complete all as directed by Engr-in-Charge.
M&L PCC for 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating ,as directed coping, benching & for fixing railing, holdfast etc complete.
M&L for cement concrete 1:3:6 type C-1 (20mm graded stone aggregate) 75 mm thick in plinth protection and courtyard, finished cement surfaces even and smooth with out using extra cement , complete all as specified and as directed by Engineer-in-Charge.
M&L providing 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded aggregate in sub base of floor complete all as specified and directed by Engr-in-Charge.
Sch 'A' Part-III (E/M Work)
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
M&L for point wiring complete with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable unsheathed in and including 20 mm medium grade ISI Marked PVC conduit with all fittings and PVC insulated FRLS copper conductor cable of size 1.5 sq mm as earth wire all as specified and as directed by Engr-in-charge, (The works includes cutting and making good disturbed surfaces and rate deemed to included in quated rate) (The contractor are requetsed to plan the work so that laying of conduit is finished during plaster stage):-
One light point controlled by one way modular switch all as specified and directed.
One ceiling/mounted fan point controlled by one way modular switch all as specified and directed.
One exhaust/Ventilation fan point controlled by one way modular switch all as specified and directed.
One 3 pin modular socket outlet 5 amps on the same board with the other switches, with cable 1.5Sqmm size.
All items as per 107 but on independent board (The distance of independednt board shall not be more than 3.00 m)
One bell/buzzer point controlled by one push button on the same board with other switch or independent with cable 1.5sqmm size
All as per the item ser No 103 here in but with copper conductor cable of size 4sqmm size and one 4 sqmm earth continuity conductor for 3pin socket outlet,15 Amps on independent board (distance shall not be more than 4.00 m), complete all as specified and as directed by Engr-in-charge.
M&L sub main wiring along with earth wire with sizes of 2x 6Sqmm and 1x 6.00Sqmm as earth continuity conductor and connected to earth dolly, PVC insulated single core multi stranded FRLS copper conductor cable drawn into and 25 mm medium grade ISI Marked PVC conduitwith all accessories and fiiting like bends, elbow etc including taking down the existing wiring along with conduit all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement ceiling rose surface Bakelite 65 x 50mm, 3 terminal complete all as specified and directed.
M&L of Painting of ceiling fans complete, in situ with one coat of synthetic enamel paint by mechnical spraying including filling cavities with filler, after cleaning all dust etc. including hanging the fan along with necessary FRLS PVC cable from ceiling rose complete all as specified and directed.
ReFixing only exhaust/Ventilation fan and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed.
ReFixing only Geyser with all its nut and bolts all as specified and directed by Engr-in-charge
S&F in replacement energy efficient, long lasting, LED Tube not more than 20Watt complete all as specified and directed by Engr-in-charge.
S& F in replacement ISI marked Self ballasted Led Retrofit Bulbs with PBT Body shell and PC diffuser LED LAMP wattage not less than 14 Watt BC 6500 K complete all as specifed and directed.
S&F in replacement ISI marked, call Bell/ buzzer, AC, 230 volts, single phase complete all as specifed and directed
S&F in replacement Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings
Supplying and fixing following modular switch/socket on existing modular plate & switch box including connections but excluding modular plate as required complete all as specified as and directed by Engineer in Charge
Modular Bell push 6A 1 module
Modular switch 1way 6A,1 module
Modular Socket, 6A-2/3 Pin combined 2 module
Modular switch socket combination outlet 3 pin, 5 Amp flash type
Supply & fix switch socket combination 16A, 6Pin, 3Module independent all as specified and as directed
Modular Fan step regulator, 120W - 2 module
Supply and fixing following size/modules, GI box along with modular base including white Cover plate with frame for modular switches complete all as specified as and directed by Engineer in Charge
6 module (200mmx75mm)
4 module (125mmx75mm)
3 module (100mmx75mm)
01 or 02 module (75mmx75mm)
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
Taking out old DB box of any size including MCBs/MCCBs removing materials to store or as sch of credit including making good of existing surfaces complete all as specified and as directed.
Supply and fix sheet metal enclosures for double door DB's when MCBs to be used Triple pole & neutral 04 way with 200 Amps rated bus bar complete all specified and directed.
Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 to 100 amp carrying capacity in the DB complete with connection testing and commissioning.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity SPN 40 Amp in the MCB DB complete with connection testing and commissioning.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity SPN 63 Amp in the MCB DB complete with connection testing and commissioning.
Supply and fixing of GI pipe 50mm light Grade for entry& exist of LTCable on pole and in trenches for safety of cable complete all as specified and directed by Engr-in-Charge
Supply, laying and testing cable in replacemet of any size cabe to XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core
M&L for sand cushioning in trenches for protection of LT under ground cable including punning and consolidation complete as sepecified and directed by Engr-in-Charge.
Supply and laying well burnt sub class ‘B’ bricks, locally available in trenches for protection of underground cable complete as sepecified and directed by Engr-in-Charge.
Dismantling and taking up old existing unserviceable GI earth plate with GI strip earthing and connected items and making of good the existing surface complete all as specified and as directed by Engr in charge.
M& L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.3mm thick, buried directly in ground(earthpit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead with 4mm dia with protection pipe 15mm GI Light grade PIpe by means of bolts, nuts and check nuts and washers of GI or steel all as shown in Electrical plate No 3 including earth work funnel with watering arrangement, wire mesh, GI pipe 20mm internal dia light grade buried directly vertical and adjacent to the electrode for watering , PCC pit 1:3:6 type C1 and RCC chamber cover in 1:2:4 type B1 of size 550 x 550mm with 8 mm dia TMT bar of 100mm C/C both ways including of returning, filling in and removal of surplus soil to a distance not exc 50 m as specified and directed by Engr-in-charge including testing on completion. Note: The strip/wire upto 7.5mtr included in the quoted rate.
Schedule of Credit
Phogat Builders
Green Leaves
PAWAN KUMAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .