Laying HDPE pipeline for connecting of various villages reservoirs Nimbahera Minor extension pressurized pipeline from Km 0.000 to 20.880 off taking from D/s PH MD-3 at Km 18.220 of M.garh Canal

Amount

Excavation for pipeline running under pressure in trenches and pits, in open areas, where disposal of surplus earth is done alongwith the alignment including trimming & dressing sides, levelling of beds of trenches to correct grade, cutting joint holes, cutting trees and bushes, etc. refilling consolidation and watering of refill, in 15 cm layers and restoration of unmetalled or unpaved surface to its original condition, including the cost of dewatering of rain water, diversion of traffic, night signals, fixing caution boards, watching, fencing etc. and outside the town in ordinary soil (HSR item no. 6.8 (a) upto 1.5 Mtr.

Earth work excavation in ordinary soil exclusive of compensation of earth (HSR item no. 6.2 (ii) an average lead 30 mtr. (for diversion of Road)

C.C 1:2:4 with stone aggregate 20 mm size in F&P (HSR 10.41)

Providing, laying, fixing & jointing of ISI Marked H.D.P.E. Pipes 160 mm PE-100 as per ISI - 4984 (Premium make such as Dura - line/Reliance charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including carriage loading and unloading handling re-handling etc. i/c the cost of all rates special such tee band etc. Complete in all respect to be satisfaction to the Engineer-in-Charge. H.D.P.E. pipe of 6 Kg PE-100, rate be given in this items as per Punjab CSR-2020 (copy attached)

Providing and fixing CI kinetic air wall size 80 mm i/d Including carriage, loading and unloading, handling re-handling etc. Drilling, tapping, screwing in valves connection complete in all respect to be satisfaction to the Engineer-in-Charge (HSR item No. 28.13) (A)

Providing and fixing CI special tee, bend, reducer etc. Including carriage, loading and unloading, handling re-handling etc. to the satisfaction to the Engineer-in-Charge (NS item).

G-I pipe 80 mm class-C . The rate of items be taken as per approved sanctioned estimate letter No. 3516/5LCU/2019 dt. 18/07/2019

Providing, lowering, laying, cutting (cut surface to be uniformity finished) jointing with rubber rings marked with IS: 12320 and testing of SPIGOT AND SOCKETTED RCC NP-3 MARKED WITH IS:458-1988 and specials into trenches for all depths including carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to be satisfaction to the Engineer-in-Charge (400 mm i/d) (HSR No. 29.93)

Road cutting and restoring The rate of items be taken as per approved sanctioned estimate letter No. 3516/5LCU/2019 dt. 18/07/2019

Centering and shuttering for sides & soffits of beams hunching, griders, bressumers and lintels. HSR 9.7

Providing, installing, testing and commissioning of Manually operated Double Flanged DI Sluice Valves PN 1.0 as per IS 14846 including cost of nut bolts, insertion sheet, carriage, loading, unloading, painting etc (Make : IVC / Kirloskar / VAG / AVK / Bermad / Dorot) 150 mm dia (Sanctioned estimate item No. 89 (d) (NS)

Providing, installing, testing and commissioning of D.I. specials/fittings as per IS:9523 ISI marked, class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. including carriage, loading, unloading, rubber gaskets etc complete in all respects, including inspection from RITES or any other Govt agency (as approved by Engineer-in-charge). Makes as per Haryana DGS&D Rate Contract 2018. D.I. specials upto 300mm i/d (item No. 92 (a) (NS)

Providing and fixing cast iron double flanged slice valve PN-16 marked with IS=11486 including nuts and bolt marked with IS=1363 rubber sheet marked with IS=638 etc. Including carriage, loading and unloading, handling re-handling etc. Complete in all respect to be satisfaction to the Engineer-in-Charge (HSR No. 28.10a) 80mm dia.

Horizontal boring of size 325 mm i/d by Augar boring method trenches technology including construction of thrust pit complete in all respect.

Providing & insertion of 300 mm i/d or 316 mm i/d M.S casing pipe having thickness 8mm including cutting, beveling, grinding and radio-graphically welding of MS pipe with coating on inner & outer side of MS pipe with high built epoxy paint of thickness 250 micron complete in all respect.

Providing & insertion of 150 mm i/d or 162.80 mm i/d M.S casing pipe having thickness 6.40 mm including cutting, beveling, grinding and radio-graphically welding of MS pipe with coating on inner & outer side of MS pipe with high built epoxy paint of thickness 250 micron complete in all respect.

Providing & fixing of H.D.P.E spacer complete in all respect

Provision for probe radar survey to check any underground obstruction before finalizing the alingment complete in all respect.

Providing, installing, testing and commissioning of Manually operated Double Flanged DI Sluice Valves PN 1.0 as per IS 14846 including cost of nut bolts, insertion sheet, carriage, loading, unloading, painting etc (Make : IVC / Kirloskar / VAG / AVK / Bermad / Dorot) 800 mm dia

Providing, installing, testing and commissioning of Piping and Valves in Individual Pump Delivery including cost of nut bolts, carriage, loading, unloading, painting etc (Valves Make : IVC / Kirloskar / VAG / AVK / Bermad / Dorot) 700 mm dia DI Double Flanged Non Return Valve PN 1.0 as per IS 5312

Providing, installing, testing and commissioning of MS Grade E-250 BR as per IS 2062, Double Flanged Fabricated Dismantling Joints ISI marked PN 1.0 including cost of nut bolts, carriage, loading, unloading, along with spray painting grey epoxy coat inside and outside. 800 mm dia

Providing, installing, testing and commissioning of MS Grade E-250 BR as per IS 2062, Double Flanged Fabricated Dismantling Joints ISI marked PN 1.0 including cost of nut bolts, carriage, loading, unloading, along with spray painting grey epoxy coat inside and outside. 700 mm dia

Cutting and jointing of DI K7 pipe 700 mm Dia. (NS Item) L.S

Providing, installing, testing and commissioning of MS Grade E-250 BR as per IS 2062, Double Flanged Fabricated Dismantling Joints ISI marked PN 1.0 including cost of nut bolts, carriage, loading, unloading, along with spray painting grey epoxy coat inside and outside. 150 mm dia (TA -143)